SAIF,
Glad you looked it up. Now, how about in the future you check _before_ you
start spreading incorrect info?
TIA
B
"SAIF" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Yeah u r right ,i checked it I was confused thanx for correction budy :)
Eric
Yeah u r right ,i checked it I was confused thanx for correction budy :)
Eric Fairfield wrote:
100 Mb FE still falls under CSMA/CD rules especially when using a Fast
Ethernet Hub that doesn't support Full duplex. There can and will be
collisions at 100Mb Fast Ethernet in a shared
Sorry i didnt know the rules of this class teacher :)
Priscilla Oppenheimer wrote:
Your message is probably being routed to the null interface for most of us
because it's not comprehensible. Please use sentences, punctuation, and
full words, i.e. "you" instead of "u." Please don't use all
PROTECTED]
Subject: RE: 2500 series e0 fullduplex?
On Tue, 27 Feb 2001, Andrew Cook wrote:
Most Cisco ethernet ports are half-duplex only, including 2500 series.
There are some ethernet ports that can do full-duplex, like a
special port
for the 4000-series. Even the 261x series are half
Neil is correct. Fast ethernet can be used in a shared medium environment
(repeaters, fast hubs) that don't support full-duplex.
http://www.cisco.com/warp/public/cc/so/neso/lnso/lnmnso/feth_tc.htm
--- SAIF [EMAIL PROTECTED] wrote:
100mbps is not ethernet be sure its fast ethernet ,also
At 07:41 AM 2/28/01, anthony kim wrote:
Neil is correct. Fast ethernet can be used in a shared medium environment
(repeaters, fast hubs) that don't support full-duplex.
http://www.cisco.com/warp/public/cc/so/neso/lnso/lnmnso/feth_tc.htm
Nice paper. I just wanted to add my $.02 after seeing some
Priscilla Oppenheimer wrote:
Regarding the original question, though I couldn't find a URL to confirm
this, I don't think the Ethernet AUI port on the 2500 series Cisco router
supports full duplex. I think the 2500 routers came out before full duplex
Ethernet existed for one thing. Also, I
ot; [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Wednesday, February 28, 2001 3:36 PM
Subject: Re: 2500 series e0 fullduplex?
Priscilla Oppenheimer wrote:
Regarding the original question, though I couldn't find a URL to confirm
this, I don't think the Ethernet AUI port on the 2500 series Cisco
ro
well its not a terminology thing u see its understood when u use 100mbps its then not
csma/cd ethernet thing ,they made it like thre will be no collisions and speed will be
10 times than 10 mbps
yes u r right on 36xx router there is full/half/auto duplex but u didnt get the idea
,its basically
Your message is probably being routed to the null interface for most of us
because it's not comprehensible. Please use sentences, punctuation, and
full words, i.e. "you" instead of "u." Please don't use all caps, though
please do capitalize the first letter of a sentence. Those are the de
100 Mb FE still falls under CSMA/CD rules especially when using a Fast
Ethernet Hub that doesn't support Full duplex. There can and will be
collisions at 100Mb Fast Ethernet in a shared environment.
--
Eric Fairfield
CCIE #6413
"SAIF" [EMAIL PROTECTED] wrote in message
[EMAIL
Hi,
It seems to have been said a number of different ways but 100Meg can be set to full or
half duplex, 10Meg can be set to full or half duplex. There is however a requirement
that is the the hardware must be able to support both the speed and the duplex
settings.
Ethernet in the true
Hi,
It seems to have been said a number of different ways but 100Meg can be set to full or
half duplex, 10Meg can be set to full or half duplex. There is however a requirement
that is the the hardware must be able to support both the speed and the duplex
settings.
Ethernet in the true
[I haven't seen any of my posts arrive in my mailbox for about two
days. Hope this isn't a duplicate.]
100mbps is not ethernet be sure its fast ethernet ,also their is no
collisions in fast
ethernet ,its colliision free
No, there are layer 1 hubs for Fast Ethernet, which were once a
Howard C. Berkowitz wrote:
It will not. Although if you have a 2500 series with two Ethernet
ports, there is a hack where you can combine the two with a Y-cable,
making one port transmit-only and one port receive-only, and connect
the joined end of the Y-cable to a full duplex switch port.
on 1e2w's and 2e2w's you can set full/half duplex on the 10Mbps ports
On Wed, 28 Feb 2001, Marty Adkins wrote:
Priscilla Oppenheimer wrote:
Regarding the original question, though I couldn't find a URL to confirm
this, I don't think the Ethernet AUI port on the 2500 series Cisco router
Is the Ethernet AUI port on the 2500 series Cisco routers Full Duplex
compatible? Does it autonegoiate? Can you hard code the interface for
half/full/auto? Thanks!
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
NO ITS ETHERNET PORT AND WORKING HALF DUPLEX ONLY ,U SEE CISCO GIVES FASTETHERNET
PORTS
SPECIALLY IN THEIR ROUTERS SPECIALLY IN 4XXX SERIES AND U KNOW ETHERNET WORKS IN HALF
DUPLEX AND FASTETHERNET WORKS IN FULL DUPLEX SO THE RESULT IS AUI PORT IS HALF DUPLEX
ETHERNET NOT AUTO SENSE AND IF U
It is NOT true that ethernet is half and fastethernet is full duplex.
Either 10Mbps or 100Mbps ehternet can be run in half or full duplex mode.
And offhand I don't know if the 2500 AUI port will do full ethernet.
--
Neil Schneider
MCT MCSE CCSI CCNP
"SAIF" [EMAIL PROTECTED] wrote in message
PROTECTED]]On Behalf Of
Neil Schneider
Sent: Tuesday, February 27, 2001 5:48 PM
To: [EMAIL PROTECTED]
Subject: Re: 2500 series e0 fullduplex?
It is NOT true that ethernet is half and fastethernet is full duplex.
Either 10Mbps or 100Mbps ehternet can be run in half or full duplex mode
100mbps is not ethernet be sure its fast ethernet ,also their is no collisions in fast
ethernet ,its colliision free and this is only possible if u have one way to send and
one way to recieve data simultaneously :) i am sure u got the idea
secondly in ethernet there are collisions and if there
Sorry but you are incorrect. (unless we just have a terminology difference
here) Just becuase you are running 100mbps. it is not automatically full
duplex. the Fastethernet ports on routers (3640 seriesfor example) can be
set to full/half/auto duplex. why bother with a half duplex setting if
ED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Neil Schneider
Sent: Tuesday, February 27, 2001 5:48 PM
To: [EMAIL PROTECTED]
Subject: Re: 2500 series e0 fullduplex?
It is NOT true that ethernet is half and fastethernet is full duplex.
Either 10Mbps or 100Mbps ehternet can be run in half or ful
Ethernet has evolved from 10 to 100 mbps. When switching technology was
introduced full duplex became possible. Full duplex can be implemented for
both 10 100 Mbps. It is now more of an equipment question and whether or
not the specific platform with support the technology in its
Though not recommended of course, fast ethernet (as noted by Neil) will run
in half-duplex mode. This, along with the introduction of an adequate
number of 'slam-dancing/moshing' frames will provide a nice collision
display (but please turn down your router speaker first, the sounds can be a
25 matches
Mail list logo
