100 is end of life. 101 and 102 will be EOL on Jan 3.
You need to be on 103 or higher. The rest will be dead in January.
—
Sent from my iPhone
> On Dec 9, 2021, at 15:25, novpenguincne via clamav-users
> wrote:
>
> Thanks for the feedback and advice. I understand what you are
Thanks for the feedback and advice. I understand what you are saying. Sadly,
this box can't be upgraded at the moment. So I may be limited in what I can
accomplish.
J
Sent with ProtonMail Secure Email.
‐‐‐ Original Message ‐‐‐
On Thursday, December 9th, 2021 at 12:32 PM, G.W.
Hi there,
On Thu, 9 Dec 2021, novpenguincne via clamav-users wrote:
Here is where I'm at trying to get clam to run on an older 32-bit O/S.
Whether it's 32 bit or 64 bit shold not be an issue. The age of the OS
is a significant issue which has already been mentioned.
After testing the
Here is where I'm at trying to get clam to run on an older 32-bit O/S.
After testing the install (from source) of every version between 99 and 104,
the highest level version that I could get to successfully install was 100.
Once I try 101 or higher, there are just too many dependency issues to
Edit and remove -Wno-logical-op-parentheses -Wno-dangling-else
libclamav/Makefile.am
libclamav/Makefile.in
libclamav/Makefile
libclamunrar/makefile
What version of zlib are you using? IIRC the reason I updated to Zlib-1.2.11
was for decompressing the signatures
This will also have to be placed in
So after some research, I tried removing the "wno-logical-op-parenthesis" and
"wno-dangling-else" entries from libclamav/makefile.* and libclamunrar/makefile
and that allowed the "make" to run. But now, running "make install", I'm
getting warnings and the install failed. From what I've been
I'm comfortable compiling from source as long as it doesn't get too complicated
with editing and dependecies.
I've been working my way up through the 32-bit versions. I was able to get
0.99 to run. I had to track down about a dozen dependencies but was finally
able to get it to install. But
I have clam 0.103.4 running on a couple CentOS 5.11 boxes and I had to build
A couple things and place them in non standard locations (for instance
/opt/openssl-1.1.1g)
There are also 4 make files that will trigger -W errors
"-Wno-logical-op-parentheses" "-Wno-dangling-else"
That have to be edited
Hi there,
On Fri, 3 Dec 2021, Matus UHLAR - fantomas wrote:
On 02.12.21 18:31, novpenguincne via clamav-users wrote:
OK. It might be difficult to get the new client to run on the old o/s but
I'll see what I can do.
hopefully older client should be able to connect to newer clamav server on
On 02.12.21 18:31, novpenguincne via clamav-users wrote:
OK. It might be difficult to get the new client to run on the old o/s but I'll
see what I can do.
hopefully older client should be able to connect to newer clamav server on
different machine via network.
--
Matus UHLAR - fantomas,
Thanks Andrew. I am trying that now. This being an older 32-bit o/s, it has
been difficult to track down the full rpm install so I've been trying to
install from source. But of course that means running into dependency issues.
I'll keep working on it for a bit to see if I can work through
On Thu, 2 Dec 2021, novpenguincne via clamav-users wrote:
Thank you for the quick response. So that would lead into the
logical next question. What would be the earliest client version
that would work? I tried installing the 103.x client on that box
but 103.x requires SystemD and this older
Good luck!
> On Dec 2, 2021, at 13:31, novpenguincne via clamav-users
> wrote:
>
> OK. It might be difficult to get the new client to run on the old o/s but
> I'll see what I can do.
>
> Thanks for the input!
>
> James
>
> Sent with ProtonMail Secure Email.
>
> ‐‐‐ Original Message
OK. It might be difficult to get the new client to run on the old o/s but I'll
see what I can do.
Thanks for the input!
James
Sent with ProtonMail Secure Email.
‐‐‐ Original Message ‐‐‐
On Thursday, December 2nd, 2021 at 12:14 PM, Joel Esler (jesler)
wrote:
> The oldest version
The oldest version that is currently supported is the 0.101.x line, but that
will be EOL in January. So I would recommend 0.103.x or higher.
—
Sent from my iPad
> On Dec 2, 2021, at 13:10, novpenguincne via clamav-users
> wrote:
>
> Thank you for the quick response. So that would lead
Thank you for the quick response. So that would lead into the logical next
question. What would be the earliest client version that would work? I tried
installing the 103.x client on that box but 103.x requires SystemD and this
older box is still using SystemV. So is there a version of the
Hi there,
On Thu, 2 Dec 2021, novpenguincne via clamav-users wrote:
... I still have an older SLES11 box running the 98.x client. ...
Would you at least try to convince me that there's any need to do that?
What prevents you from installing a supported version of ClamAV?
Now that you've
James,
Thanks for your email. ClamAV definitions won’t even work on those older
versions anymore. The Flevel for the main.cvd and daily.cvd are now set higher
than that, so those systems shouldn’t be able to load the newer definitions.
—
Sent from my iPad
> On Dec 2, 2021, at 11:08,
To facilitate bandwidth issues, I've set up an internal clam proxy server on
SLES15 running the 103.x client. I have successfully connected to it using a
different SLES15 box also running the 103.x client and downloaded updates to it.
However, I still have an older SLES11 box running the 98.x
19 matches
Mail list logo
