Stus-List Re: Fuel pump

the caveat that the pump will emulsify the > water into the fuel, and won’t spin out in the turbine – so they recommend it > be on the suction side. > I have the double 500, and it is on the suction side. > > > Bill Coleman > Entrada, Erie, PA > > > > From:

Stus-List Re: Fuel pump

shows both, only with the caveat that the pump will emulsify the > water into the fuel, and won’t spin out in the turbine – so they recommend it > be on the suction side. > I have the double 500, and it is on the suction side. > > > Bill Coleman > Entrada, Erie, PA >

Stus-List Re: Fuel pump

the suction side. > > > Bill Coleman > Entrada, Erie, PA > > > > From: David Knecht via CnC-List [mailto:cnc-list@cnc-list.com > <mailto:cnc-list@cnc-list.com>] > Sent: Monday, September 27, 2021 3:19 PM > To: CnC CnC discussion list > Cc: David Knecht >

Stus-List Re: Fuel pump

o be a PIA. I've shared this before but here is a video that > includes a mod for easier venting. This mod requires drilling and tapping > the racor head. > > https://youtu.be/H-GI38vE4hQ <https://youtu.be/H-GI38vE4hQ> > > Josh Muckley > S/V Sea Hawk > 1

Stus-List Re: Fuel pump

7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=pXd69QGBqdzp8xQNHtBbEb4CypY8i%2Fmkeu8qWLgiw6w%3D&reserved=0> > > On Thursday, September 23, 2021, 12:36 PM, David Knecht via CnC-List > wrote: > > I meant bypass the Racor, turn on

Stus-List Re: wind instrument

I am unclear on the question, but here is my experience with tridata transducers. I put in a Raymarine Seatalkng network a few years. I added a Airmar DST800 depth/speed/temp tri-ducer more recently which plugged right into the network and worked perfectly on my Raymarine chartplotter. All I

Stus-List Re: Bow Repair

I was gonna say what Nathan said...never mind. Sent from my Android. Please forgive typos. Thank you. From: Dennis C. via CnC-List Sent: Saturday, September 25, 2021 4:01:52 PM To: Stus-List Cc: Dennis C. Subject: Stus-List Re: Bow Repair If you can't find a l

Stus-List Re: Insurance

Check the fine print. Ask the question. If I lose the mast Sent from my Android. Please forgive typos. Thank you. From: Andy Frame via CnC-List Sent: Thursday, September 23, 2021 3:54:40 PM To: cnc-list@cnc-list.com Cc: Andy Frame Subject: Stus-List Re:

Stus-List Re: wind instrument

to replace it, it would be the same or perhaps the Sailtimer version (https://wi-rb.com/product/rb/). Dave David Knecht Rear Commodore Thames Yacht Club New London, CT > On Sep 22, 2021, at 5:47 PM, Peter W. via CnC-List > wrote: > > FWIW, earlier this season, I replaced my TackT

Stus-List Re: Fuel pump

terminal on the pump itself then the metal chassis must > be the ground. > > If you are referring to a schematic the ground wire may not be illustrated. > > Dave > > Sent from my iPhone > > > On Sep 22, 2021, at 10:16 AM, David Knecht via CnC-List &g

Stus-List Re: Fuel pump

oming from the tank, bypassing it will > allow the matter to get to the engine. > > Neil Andersen > 1982 C&C 32, FoxFire > Rock Hall, MD 21661 > 484-354-8800 > From: David Knecht via CnC-List > Sent: Thursday, September 23, 2021 9:36:44 AM > To: CnC CnC discussion

Stus-List Re: Fuel pump

Hi Dennis- The Racor looks OK, but of course that says nothing. I don’t know the Racor model but it is older since it does not have the threaded top that you can add a gauge to. Since that is a more expensive alteration, I thought I would replace the fuel lines first and see if that fixes the

Stus-List Re: Fuel pump

David Knecht Rear Commodore Thames Yacht Club New London, CT > On Sep 23, 2021, at 5:22 AM, CHARLES SCHEAFFER wrote: > > On my boat the ground wire has a ring terminal attached to the pump foot. > The original pump was screwed to the inside of the engine box with wood >

Stus-List Re: crank handle for roller furling boom on a 30 mk1

I use a large screwdriver on my 25. It fits in perfectly but obviously doesn’t stay in or lock the boom in place. But it works. Yours truly, David Godfrey > On Sep 22, 2021, at 8:29 PM, andrew_m--- via CnC-List > wrote: > >  > We recently purchased a 1974 C&C 30 mk1. Ou

Stus-List Fuel pump

I am trying to diagnose fuel issue. I dont understand pump wiring. There appears to be only one wire to pump. Where is it grounded? Sent from my iPhone Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - u

Stus-List Re: Fuel pump problem?

I have a vacuum gauge on the line between the fuel tank and the Racor with a drag pointer to mark the max vacuum and that has not shown any increase when this happens, so I am presuming the line is not plugged. A pressure gauge on the other side of the pump makes sense and I might add that when

Stus-List Fuel pump problem?

Seems to be the week for Dave’s and diesel fuel problems. Here is my story to hopefully get the wisdom of the group. Last Wednesday I was out for a lovely sail (7.5-8 knot reach across Fisher’s Island sound for lunch and back). I had motored into the harbor on the other side of the sound fo

Stus-List Re: C&C 40 TRDK

Graham owned on for 16 years. Email me and lets chat. Sent from my Android. Please forgive typos. Thank you. From: Graham Collins via CnC-List Sent: Saturday, September 18, 2021 9:07:43 AM To: C&C List Cc: Graham Collins Subject: Stus-List C&C 40 TRDK Hi! An

Stus-List Re: C&C 40 TRDK

Welcome fellow 40 owner. Bought another boat. Still keeping her in the family for future generations. Sent from my Android. Please forgive typos. Thank you. From: w6re via CnC-List Sent: Saturday, September 18, 2021 3:00:10 PM To: Stus-List Cc: w6re Subject

Stus-List 37 R For Sale - Mattapoisett, MA

In case you m missed it...Danny and I know the owner and boat well. https://www.yachtworld.com/boats/1989/c$c-37-r-3864375/ David F. Risch Managing Director Great Benefits USA 401-419-4650 - Direct Line [https://docs.google.com/uc?export=download&id=1iPWGeVIdWdypHSMZPtJX0mxirxyZ4ZBN&a

Stus-List Re: anyone gone lithium?

Riley, This was great worthy of printing and saving. Thank you! From: Riley Anderson via CnC-List Sent: Wednesday, September 15, 2021 11:39 AM To: Stus-List Cc: Della Barba, Joe ; Riley Anderson Subject: Stus-List Re: anyone gone lithium? Hi Joe and any others interested in this topic. I i

Stus-List Re: anyone gone lithium?

I heard a distress call on the VHF from a boat on fire calling the Coast Guard because they could not put out the fire in their lithium battery bank. I would certainly keep that issue in mind as it appears to merit special consideration in a marine environment. Dave S/V Aries 1990 C&C 34+ Ne

Stus-List Re: [EXTERNAL] Re: C&C 33-II vs 35-II now race course design

It was my understanding that PHRF ratings factored in reaching. That said. 1 ¼ mile W/L course(s) on a sym 40’ got old real fast. Needed 8 crew. And then burnt out that crew in a 4 race a day regatta. No fun. We stopped that silliness years ago. Only long distance now. From: Randal Sta

Stus-List Re: IDA - C&Cers check in

We just had Henri pass nearby last week, but it was nothing like what hit you. Here is a photo looking out from the beach near our club into the mooring field at the height of the storm (from CNN). Aries is invisible in the background. No damage to report. https://photos.app.goo.gl/zj7AzdpGiT

Stus-List Re: Boric Acid Powder

I have been told that boric acid works because it clings to their legs .However spiders do not clean their legs so they do not ingest it.Might want to research and confirm.We use spider spray and dryer sheets . David On Mon, Aug 30, 2021, 12:20 PM David Swensen via CnC-List < cnc-list@

Stus-List Re: Boric Acid Powder

I do not know about using Boric Acid with spiders, but I know my brother is in Dunkirk, NY and they have mucho spiders there. He uses peppermint oil, and it seems to work pretty well. He dabs soaked cotton balls around the compalionway, hatches, and portholes, and I believe docklines. David

Stus-List Re: Leaking hatch

forehatch (replaced the lens also) using Dow 795 calk > and believe it'll be a long-time cure from what I've seen, read and heard of > it. > > Jim Hesketh > Whisper C&C 26 > Miami, FL > > On Sun, Aug 22, 2021 at 10:35 AM David Knecht via CnC-List > mailto

Stus-List Leaking hatch

? Nothing I have used stays gooey after many years. This all presumes the boat is still there tomorrow. Wind forecast is 50-60 at the mooring later today. Fingers crossed. Dave David Knecht Rear Commodore Thames Yacht Club New London, CT Thanks to all of the subscribers that contributed to the

Stus-List Re: Mystic Seaport Wooden Boat Festival

Damn. I owe Edd 10 bucks. Went there today instead of Saturday.Dang Hurricanes! Sent from my Android. Please forgive typos. Thank you. From: Edd Schillay Sent: Wednesday, August 18, 2021 2:09:16 PM To: Stus-List Cc: David Risch Subject: Re: Stus-List

Stus-List Re: Mystic Seaport Wooden Boat Festival

I will be there! I will buy the first round! From: CHARLES SCHEAFFER via CnC-List Sent: Wednesday, August 18, 2021 12:01 PM To: CNC boat owners, cnc-list Cc: CHARLES SCHEAFFER Subject: Stus-List Mystic Seaport Wooden Boat Festival Driving to Mystic Seaport this weekend for the Wooden Boat Fes

Stus-List Re: Steering cable

Fortunately, on my boat, the quadrant is very open and accessible under a removable panel in the rear cockpit floor. That part should be easy. The only challenge (LOL- famous last words) looks like feeding the cables through the pedestal. Dave David Knecht Rear Commodore Thames Yacht Club

Stus-List Re: Steering cable

John Irvin via CnC-List <mailto:cnc-list@cnc-list.com>> wrote: > You need someone nimble and experienced! > > Sent from my iPhone > >> On Aug 12, 2021, at 1:45 PM, David Knecht via CnC-List >> mailto:cnc-list@cnc-list.com>> wrote: >> >>  A friend

Stus-List Steering cable

A friend at our yacht club had his steering cable snap the other day. I had been planning a steering system lube and check for a few years and this motivated me to move it to the top of my priority list. While I was lubing and checking yesterday, I found one spot with broken wires on the cable

Stus-List Re: Intermittent stalling

I am putting my money on the pickup in the tank. Pull it and clean it. If tank cruddy need be cleaned to avoid in future. Sent from my Android. Please forgive typos. Thank you. From: Tom Buscaglia via CnC-List Sent: Tuesday, August 3, 2021 11:35:04 PM To: Stu

Stus-List Re: C&C smile and rust

Is it possible that the crack is below the actual keel hull joint? When you look again, send more pics from inside and out, including the keel bolts. On Tue, Aug 3, 2021, 2:45 PM Greg Van Nest via CnC-List < cnc-list@cnc-list.com> wrote: > Hi, I'm new here. I tried posting this a couple days ago,

Stus-List B & G Autopilot Error Code...

I have an older B &G Pilot autopilot throwing an "INT CMP" error message. Manuals are not very clear as to what may be the cause. Any experience out there? Thanks in advance. David F. Risch Managing Director Great Benefits USA 401-419-4650 - Direct Line [https://docs.google

Stus-List Re: olympics

r C&C 34R and got back into > "sitdown" sailing. Initially we cruised her, then I raced with crew and > more recently I set her up to singlehand and cruise and race her that way. > She's a lot of fun. > > Chuck S > > > > On 07/25/2021 1:27 PM David Sw

Stus-List Re: olympics

It is a little sad that this will be the last Olympics for the Finn. On Sun, Jul 25, 2021 at 12:54 PM John Conklin via CnC-List < cnc-list@cnc-list.com> wrote: > yes > 2 Man Volley ball Amazing story and match! > Woman’s indoor quite interesting as well. > Can’t wait for the sailing ⛵️! > > John

Stus-List Re: PSS Stuffing Box

I get a lot more water in the bilge from rain and swapping plug and paddlewheel than I do from the dripping shaft, so dripless is a non-issue for me. I tightened up my stuffing box last year and since then dripping is almost non-existent and the stuffing box is still cool under motor power. Da

Stus-List Re: Stuffing Box

Buck Alconquin. With PTFE packing material. Foolproof and effective. Sent from my Android. Please forgive typos. Thank you. From: Wyatt via CnC-List Sent: Monday, July 12, 2021 8:44:09 PM To: Stus-List Cc: Wyatt Subject: Stus-List Re: Stuffing Box Ooh intere

Stus-List Re: Old Harken Roller II

FYI. Shipping has gone up appreciably lately. Sent from my Android. Please forgive typos. Thank you. From: Hoyt, Mike via CnC-List Sent: Friday, July 9, 2021 3:19:12 PM To: 'Stus-List' Cc: Hoyt, Mike Subject: Stus-List Re: Old Harken Roller II Hi Danny I o

Stus-List Re: C&C 37r coming to market soon

, July 8, 2021 4:00:19 PM To: Stus-List Cc: DJ Subject: Stus-List Re: C&C 37r coming to market soon You can always come sailing with me! On Jul 8, 2021 12:17 PM, David Risch via CnC-List wrote: Waiting for the damned boat yard! From: DJ via CnC-List Sent: Thursday, July 8, 2021 11:28 A

Stus-List Re: C&C 37r coming to market soon

get the usual info David? Where are you these days? I want to see your new "stink pot!" LOL Danny On Jul 8, 2021 11:19 AM, WILLIAM WALKER via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Where is 37R located? On Thursday, July 8, 2021, 08:04:26 AM EDT, Joel Delamirande via

Stus-List Re: C&C 37r coming to market soon

Racing version. 3 or 4 different models. I too know the boat. Very clean and lightly used. Sent from my Android. Please forgive typos. Thank you. From: Joel Delamirande via CnC-List Sent: Thursday, July 8, 2021 5:45:55 AM To: Stus-List Cc: Joel Delamirande

Stus-List Re: Rescue at sea.

OK. I'll be the jerk here. I am still confused as to why he did not know whether BMD would or would not take him before he disembarked. And why he just did not sail back to port when he found out he could not enter. Being rescued because your tired? If I was the owner of that very-large-expe

Stus-List Re: Dorade vent replacement

Richard I replaced both cowl vents with stainless low profile vents. Looks great till you lose one. Had s/s guards fabricated and have not one since then. From: Richard Bush via CnC-List Sent: Thursday, July 1, 2021 2:44 PM To: cnc-list@cnc-list.com Cc: petemcm...@gmail.com; Richard Bush Sub

Stus-List Re: solar fans

Chuck, What is the placement of your solar fans? On Thu, Jul 1, 2021 at 5:42 PM CHARLES SCHEAFFER via CnC-List < cnc-list@cnc-list.com> wrote: > FWIW, I think solar fans make more sense than opening ports. Opening ports > are nice to have but when the breeze stops, the air stops moving. Rain and

Stus-List Re: Our next online rendezvous

Wed night beer can racing for me to! Dave David Knecht Rear Commodore Thames Yacht Club New London, CT > On Jun 30, 2021, at 11:10 AM, Novabraid via CnC-List > wrote: > > Stu, > I don’t know about the other folks in the group, but Wednesday nights in the > summer a

Stus-List Re: Seawater pump

after numerous scraped ankles. I am guessing others have done the same. S/V Aries 1990 C&C 34+ New London, CT > On Jun 25, 2021, at 9:40 AM, Joel Aronson via CnC-List > wrote: > > We wash dishes with sea water and rinse with fresh water > > Joel > > On Fri, J

Stus-List Seawater pump

My boat came with a pump with coiled hose and spray nozzle in the area near the sink through-hull that is plumbed to a through-hull to seawater. I have never used it and am not sure what one would do with sea water pumped into the cabin in this location. Any hints? Thanks- Dave S/V Aries 199

Stus-List Keel bolt torque with antisieze

torque for wet bolts vary from 56% to 80% of the dry torque. That results in a range of anywhere from 228 to 280 ft lbs using wet bolts. Am I on the right track with this? and if so, any comments on the "corrected" wet bolt torques? Thanks in advance David Swensen Thanks to al

Stus-List Re: Standing rigging replacement

If the turnbuckle threads are disintegrating (verify)…minimally have the rig removed, turnbuckles replaced and rig x-rayed. Re-heading and new turnbuckles may be all you need. That being said you may as well go the whole route if you are doing all that anyway. IMHO…I think rod is over-repl

Stus-List Re: Insurance for Older Boats

Reach out to Charlie, who insures my 1985 49’ Gulfstar - Charlie Bailey of Novamar char...@novamar.net Or Kevin Malloy who insures my 1981 40’ C & C - Kevin Malloy kmal...@delandgibson.com None of the depreciating BS, you may need a s

Stus-List Re: [EXTERNAL] Insurance for Older Boats

I had also used Progressive for my previous boat, a 75 Ranger 28. They were great. I think they actually have USAA manage the policy. Now I have updated to a much newer 85 C&C and they didn't even ask for a copy if my survey David Swensen Freya 35 MK3 Beverly, MA On Tue, Jun 22, 2

Stus-List Insurance for Older Boats

s highly concerning. Any recommendation for a carrier that is more favourably inclined to cover an older boat would be most appreciated. David Morris -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus Thanks to all of the subscribers that contributed

Stus-List Re: Deck hold -down?

There would not be as these deck straps were installed in the 1980s boats, e.g. mine is 1981. From: Donald Kern via CnC-List Sent: Wednesday, June 9, 2021 10:49 AM To: Stus-List Cc: Donald Kern Subject: Stus-List Re: Deck hold -down? Like Shawn's boat mine is also C&C 35 Mk2 (1974), but there

Stus-List Re: Deck hold -down?

In lieu of “gluing” the decks to the bulkheads (Rob Ball can better explain, but apparently boats were “breaking” when run aground…they thought this method would provide a bit of give). Your problem of a proud horizontal deck piece? Never encountered that. But they are a constant target of l

Stus-List Re: teak ladder treads

Newport Nautical in RI has hunks of teak of almost perfect size ($8 per?) that I table topped sawed out treads then had bottoms routed half the diameter of the bar. Countersunk bolts in tread thru ladder with acorns nuts. They still have teak. Sent from my Android. Please forgive typos. Tha

Stus-List Re: Edson Acquired

Last I knew. From: Matthew via CnC-List Sent: Wednesday, June 2, 2021 3:53 PM To: 'Stus-List' Cc: Matthew Subject: Stus-List Re: Edson Acquired What about Rob Ball? Is he still there? From: Bill Coleman via CnC-List mailto:cnc-list@cnc-list.com>> Sent: Wedn

Stus-List Re: Edson Acquired

I have known Chip for years. Good for the Keanes, good for Chip and good for us. Sent from my Android. Please forgive typos. Thank you. From: Bill Coleman via CnC-List Sent: Wednesday, June 2, 2021 1:51:56 PM To: 'Stus-List' Cc: Bill Coleman Subject: Stus-Lis

Stus-List Re: UFO noise update

I have a short line with a clip on the back of the boom that I attach to the split backstay and pull the traveller to the opposite side until it is tensioned to keep the boom from swinging. Dave S/V Aries 1990 C&C 34+ New London, CT > On Jun 1, 2021, at 4:54 PM, Martin DeYoung via CnC-List

Stus-List Re: Shroud tension

I can add one trick I learned from a local old salt. I always had trouble centering the mast by pulling down on the halyard as the rigging guides suggest. It is hard to assess equal tension on both sides. I got an inexpensive fish weighing scale, hook the halyard to it and then measure the t

Stus-List Prop strut 35-3 question

Does anyone know how far aft of the propeller strut the strut recess extends? I need to refair the strut but have a crack extending 1 1/2 inches aft of the strut. I am not sure if it is fairing or hull, and don't want to take out too much material. Thanks. David Swensen Freya, 35 MK3 Than

Stus-List Re: An Introduction

Welcome Hans. Ignore the UFO believers. We just humor them and they eventually settle down. Sent from my Android. Please forgive typos. Thank you. From: M. Hans Liebert via CnC-List Sent: Tuesday, May 18, 2021 10:33:23 PM To: cnc-list@cnc-list.com Cc: M. Hans

Stus-List Re: 3HM35F oil capacity puzzle

When I removed the oil pan on my 3QM30 to extract a dropped "whatnot" during my upper job the oil pan was empty. I use the old suck it out the dipstick method. Surprised me as to how much is not there. Sent from my Android. Please forgive typos. Thank you. Fro

Stus-List Re: Free anchor kellet and location float

On Wed, May 12, 2021 at 9:34 AM David Risch via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Sorry Marion, MA From: Robert Mazza via CnC-List mailto:cnc-list@cnc-list.com>> Sent: Wednesday, May 12, 2021 8:02 AM To: Stus-List mailto:cnc-list@cnc-list.com>> Cc: Robert Mazz

Stus-List Re: Free anchor kellet and location float

Sorry Marion, MA From: Robert Mazza via CnC-List Sent: Wednesday, May 12, 2021 8:02 AM To: Stus-List Cc: Robert Mazza Subject: Stus-List Re: Free anchor kellet and location float David, Where are you located? Rob On Wed, May 12, 2021, 7:07 AM David Risch via CnC-List, mailto:cnc-list@cnc

Stus-List Re: Free anchor kellet and location float

Marion... From: Robert Mazza via CnC-List Sent: Wednesday, May 12, 2021 8:02 AM To: Stus-List Cc: Robert Mazza Subject: Stus-List Re: Free anchor kellet and location float David, Where are you located? Rob On Wed, May 12, 2021, 7:07 AM David Risch via CnC-List, mailto:cnc-list@cnc

Stus-List Free anchor kellet and location float

Any takers? Maybe a bit costly to ship because of the weight (10 lbs). Pics if interested. David F. Risch Managing Director Great Benefits USA 401-419-4650 - Direct Line [https://docs.google.com/uc?export=download&id=1iPWGeVIdWdypHSMZPtJX0mxirxyZ4ZBN&a

Stus-List A fun video...

...about a great boat, done by a fun guy, in a great location! https://www.youtube.com/watch?v=PN7_uXD7mHs David F. Risch Managing Director Great Benefits USA 401-419-4650 - Direct Line [https://docs.google.com/uc?export=download&id=1iPWGeVIdWdypHSMZPtJX0mxirxyZ4ZBN&a

Stus-List Sherwood water pump replacement

My Universal M4-30 has a Sherwood water pump that I hate every time I have to touch it (mercifully infrequent). For some reason, they designed it with the screws coming in from the back, which are a PITA to get to. I remember reading that there was an Oberdorfer pump that could replace the She

Stus-List Re: Stu's Zoom meeting

a no-show for a C&C Rendezvous….. All the best, Edd Edd M. Schillay Captain of the Starship Enterprise C&C 37+ | Sail No: NCC-1701-B Venice Yacht Club | Venice Island, FL On Apr 23, 2021, at 1:15 PM, David Risch via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Ugh.

Stus-List Re: Stu's Zoom meeting

Ugh. Missed it. Was it recorded? Sent from my Android. Please forgive typos. Thank you. From: CHARLES SCHEAFFER via CnC-List Sent: Thursday, April 22, 2021 10:03:01 PM To: CNC boat owners, cnc-list Cc: CHARLES SCHEAFFER Subject: Stus-List Stu's Zoom meeting

Stus-List Re: Removing lettering

Works a charm From: Ken Heaton via CnC-List Sent: Wednesday, April 21, 2021 7:14 PM To: Stus-List Cc: Ken Heaton Subject: Stus-List Re: Removing lettering 3M makes a type of rubber wheel you put in a drill and use to rub off adhesive lettering. Apparently they work well. Google "3M Stripe O

Stus-List Re: Navtec Hydraulic backstay adjuster, soon to be free

Even my $500 Navtec Guy got it wrong. Charged me again the next season after it failed as it was beyond warranty. Right... Sent from my Android. Please forgive typos. Thank you. From: Jeffrey A. Laman via CnC-List Sent: Tuesday, April 20, 2021 10:28:53 AM To:

Stus-List Re: Auto pilot???

Dont scrimp on install. Make sure it has a rudder indicator. When done right its your new best friend. Sent from my Android. Please forgive typos. Thank you. From: Ted_Relinda--- via CnC-List Sent: Monday, April 19, 2021 11:11:23 AM To: Stus-List Cc: ted_re

Stus-List Re: Information

Relinda I have had hull # 121 for 15 years. Do reach out if you have specific questions. Sent from my Android. Please forgive typos. Thank you. From: Don Kern via CnC-List Sent: Sunday, April 11, 2021 1:29:02 PM To: ted_relinda--- via CnC-List ; ted_reli...@yah

Stus-List Re: Red Jacket video tonight with Rob Mazza

Has anybody found the recording link? Thanks in advance. From: Shawn Wright via CnC-List Sent: Wednesday, April 7, 2021 1:28 PM To: Stus-List Cc: Shawn Wright Subject: Stus-List Red Jacket video tonight with Rob Mazza Not sure if this was mentioned here, but I saw it on the FB group, and jus

Stus-List Re: um From richard - now Airhead

I hope you not sourcing water from that port water tank. Was told to never source fresh water flush from a tank you may be using for consumption, washing etc. I plumbed a fresh water flush via sink drain "T". Easily found on internet. From: Dave Godwin via CnC-List Sent: Tuesday, April 6,

Stus-List Re: Coal tar bottom paint removal?

I am having a hard time wrapping my head around a "coal tar bottom paint". Never heard of it. Sent from my Android. Please forgive typos. Thank you. From: Bill Coleman via CnC-List Sent: Sunday, April 4, 2021 2:23:58 PM To: Stus-List Cc: Bill Coleman Subject

Stus-List Re: C&C 40 Spinnaker

r and pinhole (pictured, not patched) From: Bob Mann via CnC-List Sent: Thursday, April 1, 2021 2:49 PM To: Stus-List Cc: John Conklin ; Bob Mann Subject: Stus-List Re: C&C 40 Spinnaker I would think so. My new A3 for my 35 mk I has a luff of 45 Bob On 04/01/2021 10:27 AM John Conklin

Stus-List Re: C&C 40 Inspection Checklist

Make sure the hot tub temp gets to 104 degrees. (good luck!) From: Della Barba, Joe via CnC-List Sent: Thursday, April 1, 2021 2:20 PM To: Stus-List Cc: Della Barba, Joe Subject: Stus-List C&C 40 Inspection Checklist I am going to Maine on 4/14 to look at Elusive. Does anyone have a list of

Stus-List Re: White vinegar

Flush and let sit. Cleans out head line from uric acid build up -Original Message- From: Fred Hazzard via CnC-List Sent: Thursday, April 1, 2021 11:01 AM To: Stus-List Cc: Fred Hazzard Subject: Stus-List White vinegar As senior citizen I suffer from the dreaded malady CRS. Yesterda

Stus-List Mercury-4 cycle 8hp for sale

2006 but used only 2 or 3 seasons and carb rebuilt last year. Runs great. David F. Risch Managing Director Great Benefits USA 401-419-4650 - Direct Line [https://docs.google.com/uc?export=download&id=1iPWGeVIdWdypHSMZPtJX0mxirxyZ4ZBN&revid=0B9uSW32EcB8tZGxlWW1OMlJ6MXU0bmVaaFByQmlSVD

Stus-List Re: C&C 40 Spinnaker

Head to the CnC website and compare specs. I am a standard rig 40-2. From: John Conklin via CnC-List Sent: Thursday, April 1, 2021 10:27 AM To: Stus-List Cc: John Conklin Subject: Stus-List Re: C&C 40 Spinnaker David, I assume this may work on My C&C 37 ? Thanks John Conklin On Apr

Stus-List C&C 40 Spinnaker

I am selling a used once or twice airrex 700 Spinnaker for a 40-foot sailboat it's on eBay if anybody's interested special pricing for friends Sent from my Android. Please forgive typos. Thank you. Thanks to all of the subscribers that contributed to the list to help with the costs involved. I

Stus-List Re: Now best powerboats

Edd thought he escaped... But between me and now Danny... From: Danny Haughey via CnC-List Sent: Wednesday, March 31, 2021 12:23 PM To: cnc-list@cnc-list.com Cc: Danny Haughey Subject: Stus-List Re: Now best powerboats Edd, That was me, Danny, that mentioned the interest down there Danny -

Stus-List Re: water tanks interconnected, or not?

During the recent Defender sale, I noticed they had a special on tank monitor I had not seen before from LIST. One and three tank systems with outside detectors. I don’t know anything about them personally, but was tempted (and resisted- not that hard to monitor by eye for my boat). Dave htt

Stus-List Re: 40 or 41?

Looked at a 41. Nope. Got me a 40. Sent from my Android. Please forgive typos. Thank you. From: Dave S via CnC-List Sent: Monday, March 29, 2021 9:06:19 PM To: Stus-List Cc: David NCW ; Dave S Subject: Stus-List Re: 40 or 41? When fixing the keel-filler

Stus-List Re: 40 or 41?

2 great boats, the fur is gonna fly! On Mon, Mar 29, 2021, 4:49 PM G Donald Wagner via CnC-List < cnc-list@cnc-list.com> wrote: > Joe, et al > > I've had my C&C 41 CB since 1986. > She has served my family in fine style for many seasons on the Bay as an > excellent racer and cruiser. > > I've kep

Stus-List Re: Remote vhf stereo speakers

> the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu David Knecht S/V Aries 1990 C&C 34+ New London, CT Thanks to all of the subscribers that contributed to the list to help wit

Stus-List Re: Remote Vhf/Stereo Speakers

Once you have a RAM you will be amazed at how much (2 way) you will use it. Sent from my Android. Please forgive typos. Thank you. From: Bill Coleman via CnC-List Sent: Sunday, March 28, 2021 9:24:25 AM To: Stus-List Cc: Bill Coleman Subject: Stus-List Re: Remo

Stus-List Re: C&C 40 CaptainQ refit

How deep is the lake. Sent from my Android. Please forgive typos. Thank you. From: Danny via CnC-List Sent: Saturday, March 27, 2021 8:51:26 AM To: Stus-List Cc: Danny Subject: Stus-List Re: C&C 40 CaptainQ refit Whoa... On Mar 27, 2021 8:33 AM, Joel Delamira

Stus-List Re: C&C 40 rigging

I had a rigging surveyor for my rider. Seperate surveyor by a bona fide rigger. Sent from my Android. Please forgive typos. Thank you. From: Bill Coleman via CnC-List Sent: Friday, March 26, 2021 4:10:36 PM To: 'Stus-List' Cc: Bill Coleman Subject: Stus-List R

Stus-List Re: C&C 40 rigging

Hi Len- I would like to hear that story. I did not think a backstay failure would lead to dismasting. Dave S/V Aries 1990 C&C 34+ New London, CT > On Mar 25, 2021, at 6:57 PM, Len Mitchell via CnC-List > wrote: > > I would be interested to know if salt vs fresh water changes the life span

Stus-List Re: Refrigerator Door Seal

Wire in a small computer muffin fan to circulate air. Cold and hot spots disappear. Sent from my Android. Please forgive typos. Thank you. From: Bill Coleman via CnC-List Sent: Thursday, March 25, 2021 9:20:04 PM To: Stus-List Cc: Bill Coleman Subject: Stus-L

Stus-List Re: C&C 40 rigging

For the Marion Bermuda race 2009, 2011 and 2015 my original rigging on my 1981 40-2 (I think its original) had to be surveyed for the race rider. Passed each time. But I doubt they would let go again. Locally. I have absolute confidence in the rig. Out there the loads can be incredible an

Stus-List Re: Dellenbaugh angle

Have to catch up on my nautical terms. I thought that was the Murphy’s angle. Dave S/V Aries 1990 C&C 34+ New London, CT > On Mar 22, 2021, at 12:33 PM, Dennis C. via CnC-List > wrote: > > The Dellenbaugh Angle is much less critical than the Modelo Angle. The > Modelo Angle is the angle

Stus-List Re: Dellenbaugh angle

Does anyone know the Dellenbaugh angle for the 34/36 (34+) or 37+? I did not see them on that chart. Dave S/V Aries 1990 C&C 34+ New London, CT > On Mar 22, 2021, at 10:08 AM, dwight veinot via CnC-List > wrote: > > From the Dellenbaugh Angle calculation the C&C 40 tall mast is quite tend

Stus-List Re: C&C 40

The auto pilot on Corsair is quadrant mounted and it is amazing. Quartering 10’ seas are not even a problem. Gotta love algorithms. From: Shawn Wright via CnC-List Sent: Sunday, March 21, 2021 1:35 PM To: Stus-List Cc: Shawn Wright Subject: Stus-List Re: C&C 40 I'm impressed how well the b

<    1   2   3   4   5   6   7   8   9   10   >