Stus-List Re: Roller Furlers

Hi Richard, my old Harlem was replaced in 2018 with a Schafer. Have not had a problem in 6 years. I hose it of whenever I'm at a dock, which doesn't happen often. Can't tell you the model. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Sat, Jul 6, 2024, 06:53

Stus-List Re: C 40 custom pilothouse

The 39 also has a partial skeg hung rudder Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Fri, May 31, 2024, 06:52 Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote: > The LF 39 has the prop way ahead of the rudder and the toerail is totally >

Stus-List Re: C 40 custom pilothouse

I've had both the LF 38 and 39. I think it is a cross between the 2. It does have an interesting layout below. If it was on the West Coast I'd entertain the thought of looking into it. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Fri, May 31, 2024, 06:36

Stus-List Re: new jib sheet

I use soft shackles on my job sheets. They don't seem to get hung up, and can easily be removed. Douglas Mountjoy 1988 C 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Sun, May 26, 2024, 15:58 Josh Muckley via CnC-List wrote: > Consider one continuous line with and alpine butterfly and

Stus-List Re: Sealant of choice for cockpit drains

Don't use butyl below the waterline. I like Sika Flex 291. But 3m 4200, Boat life calk work well also. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Sat, May 18, 2024, 19:59 Bruno Lachance via CnC-List < cnc-list@cnc-list.com> wrote: > > I am about to replace

Stus-List Re: Non Starting Universal / Westerbeke 5416

Make sure you have fuel flow. Is the electric fuel pump working? Is the fuel turned off? Check for fuel at the injector, crack a line and crank the engine. You should have fuel flow. Douglas Mountjoy 1988 LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Fri, May 17, 2024, 19:19 Todd

Stus-List Rudder woes

Good morning all. I have a quick question for all y'all. Does anyone know the size of the bolt hole in the top of a 39 LF rudder, or whether it is metric or SAE? The hardware store is several miles away. I'm in the process of dropping my for much needed repairs. Thanks in advance Doug Douglas

Stus-List To pressure wash or not

Hello all I'm getting ready to haul Rebecca Leah for the summer here in Mexico. My question is should I pressure wash after haul out or have the bottom cleaned now before hauling? I'm using an Ablative paint. I will splash again in late Oct. Thanks Doug Douglas Mountjoy 1988 C LF 39 Mexico at

Stus-List Re: Racor 500MA question

Dennis, I didn't know there was a check valve in the filter. Since I have 2 Racor filters I put a tee and gauge in the fuel line after the filters. I have not noticed the gauge acting strange. But then I don't look at it often. You might try relocating the gauge. I would think that once the engine

Stus-List Re: Fridge insulation

Thanks Dennis Douglas Mountjoy 1988 LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Thu, Apr 25, 2024, 18:20 Dennis C. via CnC-List wrote: > Doug, > > When I installed refrigeration on Touche' (1971 35-1), I was curious about > the existing insulation. I removed the galley sink and

Stus-List Fridge insulation

Hello all, I'm contemplating removing the fridge fiberglass liner to better insulated it. This year I want to install new water cooled refrigeration. I'm not sure how the liner is held in place, and how much of the cabinetry I will have to remove. I think that there is some foam insulation already

Stus-List Re: Mystery Leak

John, o had a similar leak on my LG 39. It turned out to be a hatch on the deck. The previous owner had put a container in a cabinet to catch the water. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Thu, Apr 25, 2024, 09:31 John McCrea via CnC-List wrote: >

Stus-List Re: C 34+ with trailer

I'll bet the empty trailer weighs in around 1.5 - 2 tons. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Fri, Apr 12, 2024, 11:58 Joel Aronson via CnC-List wrote: > Launch the boat. Empty trailer will be no problem! > > Joel > > > > On Fri, Apr 12, 2024 at

Stus-List Re: 36-1 Repower or 3HM35 heat exchanger?

Hi Jacob To second what Josh said. I repaired a SB8 Yanmar cooling system with JB weld 6 or 7 years ago. It is still holding with no leaks. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Wed, Apr 10, 2024, 05:35 jacob fuerst via CnC-List wrote: > Good day, > >

Stus-List Re: raw water filter set up for C 35 MkI

All this talk about sea strainers makes me think I should see it mine is getting plugged. It's been over 1100 miles since I launched last fall. Lots of sea life but not much in the way of growth down here. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Mon, Apr

Stus-List Fridge insulation

Hi All. Does anyone know it the icebox/refrigerator compartment on the LF39 is insulated. I noticed today that my freezer plates are not freezing like they used to. I added some Freon about a month ago, working great. I'm thinking after 20+ years it is time for a new unit. Before installing a new

Stus-List Re: Yanmar Parts ?

I just tried their website. No luck. I ordered an oil cooler from Scott Marine Power. They're in Florida. Price seemed ok. Shipping was high, but I think it was my fault. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Tue, Feb 13, 2024, 09:28 nausetbeach--- via

Stus-List Re: Hand rail replacement- sources

I bought 5\4 sapeli wood and made my own. Sapeli has the same properties as teak, but 1\4 the price. Douglas Mountjoy 1988 LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Wed, Nov 29, 2023, 18:28 Peter W. via CnC-List wrote: > Anyone had any experience to share regarding the

Stus-List Water in the oil

Here is an update on my water\oil issue. As the oil cooler is raw water cooled, and the oil lines are attached via banjo fittings. Testing was next to impossible here. I opted to replace the cooler. I'm not 100% sure it was the cooler, and not severe condensation, but I feel good about the repair.

Stus-List Re: Water in the oil

> Bill Colelman > > On Thu, Oct 26, 2023 at 3:28 PM Doug Mountjoy via CnC-List < > cnc-list@cnc-list.com> wrote: > >> There was enough water to turn the oil to chocolate milk. Could be >> condensation, there was a couple of nasty storms that came through he

Stus-List Re: Water in the oil

y the pressure bleeds off to help > determined the location severity. > > Josh > > Oct 27, 2023 09:04:31 Doug Mountjoy via CnC-List : > > Thanks Josh, > This Yanmar 4jhe doesn't have a shutdown cable or decompress lever. It > does have a bleed for the exhaust on shutdown you can

Stus-List Re: Water in the oil

you can pressure test it. > > > Good luck, > > Josh Muckley > S/V Sea Hawk > 1989 C 37+ > Solomons, MD > > Oct 26, 2023 20:14:17 Doug Mountjoy via CnC-List : > > Water from the exhaust seems unlikely at this point, it would have to flow > uphill quite a

Stus-List Re: Water in the oil

y boat is in Loreto/ Puerto Escondido. I was in > San Carlos a few years ago. Fun town. > > Get Outlook for Android <https://aka.ms/AAb9ysg> > -- > *From:* Doug Mountjoy via CnC-List > *Sent:* Thursday, October 26, 2023 12:27:55 PM > *To:* Stus-List > *Cc:* Doug Moun

Stus-List Re: Water in the oil

1988 LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Thu, Oct 26, 2023, 11:32 Jeff Nelson via CnC-List wrote: > How much water? A little could be condensation... > > Cheers, >Jeff Nelson >Muir Caileag >C 30 - 549 >Armdale Y.C. > > On 2023-10-26 1

Stus-List Water in the oil

I have a Yanmar 4JHE in my boat. After 4 months sitting on the hard, I have water in the oil.Does anyone know where the most likely place for leaking is? When I put her away last spring, I had flushed the engine and let the hoses drain. I'm at a loss here. Douglas Mountjoy 1988 LF 39 Mexico at

Stus-List Re: [EXTERNAL] Re: C 35 MK 1 bow water tank

I use a 10in carbon filter and drink my tank water. Water always tastes fine. FWIW Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Sat, Oct 21, 2023, 08:15 Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote: > If I like the bow tank I am going to do the

Stus-List Re: winter storage

I leave my mast up here in Marina Seca San carlos for the summer. There's probably 200+ stored here. All on jack stands, hard pan, and wood blocks under the keel. I remove sails, canvas, lines, and cover the boat with a sunshade. I worry more about UV damage than the occasional 70kt winds.

Stus-List Strange pipe

So I was working on my boat today checking the thru hulls. And found a 3in dia 3 FT long piece of PVC pipe under and otbd ov the aft head sink. I looks like it was factory installed. One end is plugged with a flush teak plug. The open end went through the bulkhead into the space below the nav

Stus-List Re: Jackery solar system

Hand grinder for me. https://www.amazon.com/QIYUEXES-Manual-Grinder-Ceramic-Espresso/dp/B0BPLKP4PF/ref=mp_s_a_1_16_maf_1?crid=UN7K7U7GNCB2=coffee+grinder=1697551008=coffee+%2Caps%2C183=8-16 Consistent grind every time. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA

Stus-List Re: Jackery solar system

Stove top perculator for me. With a filter, very little water needed to clean. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Tue, Oct 17, 2023, 06:48 Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote: > Its French Press for us, no electricity needed.

Stus-List Re: [EXTERNAL] Jackery solar system

I dumped the TV all together. Only use the inverter for making margaritas 浪. I have 440 wats solar. I want another 200watts for the long passages under sail. Just got back to my boat in Mexico. Batteries have been disconnected since mid August. Even with dirty panels I was charging 16.5

Stus-List Re: C 35 MK 1 bow water tank

Hi Joe, It sounds like your tank is an integral part of the hull. Both my LF38 & LF39 and my Sabre have plastic tanks in the bow. When I bought the 38 someone had put in a bladder tank. O removed it and put in a plastic tank. Not horribly difficult. Douglas Mountjoy 1988 LF 39 Mexico at large

Stus-List Re: No Traffic

Now that's funny. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Thu, Sep 7, 2023, 15:30 Bill Coleman via CnC-List wrote: > When I had my 39 hauled out to the shop for a refit, we hit a traffic > signal on the way out. I saw them working on it a few days

Stus-List Re: Diesel idle speed

I don't know the exact idle speed, but generally speaking it will be in the neighborhood of 500 to 600rpm. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Sat, Aug 19, 2023, 09:15 CHARLES SCHEAFFER via CnC-List < cnc-list@cnc-list.com> wrote: > Anybody out there

Stus-List Re: 37+ Steering Cable

The 39 LF is a center cockpit. Hence the need for the conduits. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA > Please show your appreciation for this list and the Photo Album site and >>> help me pay the associated bills. Make a contribution at: >>>

Stus-List Re: 37+ Steering Cable

I'm replacing the cables on my Edson Steering. The chain is in excellent condition. But the cables and the conduit showed signs of wear. I can't inspect the cables, and once pulled out of the conduit they won't go back in if there is any bend to the cable. I used 1\4 SS 304 7x19 cable, 4 aluminum

Stus-List Re: need age-reversing machine ASAP! Or a boat expander!

, I know someone with a spider monkey. I would not trust him with any > power tools! Actually not even non-power tools. > > > > Joe Della Barba > > Coquina C 35 MK I > > Kent Island MD USA > > > > > > > > *From:* Doug Mountjoy via CnC-List > *Se

Stus-List Re: need age-reversing machine ASAP! Or a boat expander!

I'm looking for a trained spider monkey for the jobs where I don't fit. LOL. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Sun, Jul 23, 2023, 14:40 Neil Gallagher via CnC-List < cnc-list@cnc-list.com> wrote: > Joe, > > Funny you should bring that up, as I've

Stus-List Bilge blower & pumps

I have a question for the group. Does anyone have experience with the Seaflo brand of bilge blowers or pumps? I need to replace a blower and add both. To my boats. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA Please show your appreciation for this list and the

Stus-List Re: pipe dope for Exhaust Riser

I use Teflon tape on the pipe threads. A couple of wraps is good. Douglas Mountjoy 1988 LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Sat, Jul 15, 2023, 06:30 CHARLES SCHEAFFER via CnC-List < cnc-list@cnc-list.com> wrote: > Here's a question for the mechanics in the group. > > I am

Stus-List Re: electric fuel pump

I have an on demand electric fuel pump. Controllable from either the helm or the engine room. I also put in a 3way valve in the engine supply line with the 3rd port going to the return. This allows for filter bleeding or fuel transfer between tanks. Douglas Mountjoy 1988 LF 39 Mexico at large

Stus-List Re: Engine strangeness

Thanks Niel, I'll look at this on my westerbeke. Doug Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Wed, Jun 28, 2023, 17:53 Neil Gallagher via CnC-List < cnc-list@cnc-list.com> wrote: > David, > > This may be a long shot, but on a Universal M3-20B that I

Stus-List Re: Engine strangeness

David, on a couple of different engines. I've had the electric fuel pump fail intermittently. While bringing my Sabre home the oil pressure would drop off randomly and the engine would bog down also randomly. When both happened at the same time I began to panic that the engine was thinking of

Stus-List Re: Accurate Fuel Tank Measurements

On my boat I will drain a tank completely. Then upon refilling I watch the Guage with each 5 gallons I put in. This give me a much better idea the amount of fuel left. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Tue, Jun 27, 2023, 11:08 Peter W. via CnC-List

Stus-List Re: Dual output solar controller

+1 for the Victron solar controller. I have 1 for each panel, and they talk to each othrr. Douglas Mountjoy 1988 LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Sat, Jun 17, 2023, 11:11 Nathan Post via CnC-List wrote: > I am in the process of figuring out adding solar to my two bank

Stus-List Re: Diesel Fill Hose Replacement

Hi Brian, get a friend to help. I like the tying the hoses together. One push the other pull. Lay the hose in the sun for several hours. When I did my hoses. I had to remove old before installing new. Tied a string on old. Used this to help guide new. I could get to all the places it went through

Stus-List Re: Force 10 Stove

Joe, Fisheries Supply carries the 1.4 gal tall thin tanks, and the fancy mount. I just finished converting my Sabre to propane. One thing is, only one connection inside the boat at the stove. I mounted the regulator and solenoid valve under a stern pulpit seat. Teed in a hose to the grill also. On

Stus-List Re: Engine strangeness x 2

Karl, check your whole ignition system, points, distributor, coil, and plug wires for any looseness damage or wear. Your problem definitely sounds electrical. Douglas Mountjoy 1988 C LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Mon, Jun 12, 2023, 22:42 Karl Kuzis via CnC-List wrote:

Stus-List Re: Chainplate bedding

Looking at your pictures. I think you have corrosion between the bolts and the aluminum backing plate. At least I'm guessing the backing plate is aluminum. You might try penetrating oil for several days. Good luck. Douglas Mountjoy 1988 LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On

Stus-List Re: ABYC Propane standards

oke detector was "recommended". > > Propane detector was neither "required" or "recommended". > > > > We had to add the CO detectors and we also added a smoke alarm. > > > > This was all driven by Insurance requirements :-) > > > > >

Stus-List Lewmar winch parts

A friend is in need of the stripper ring for a Lesnar 30ST winch. Any idea on where to get one? The winch is cerca 1978. Douglas Mountjoy 1988 LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA Please show your appreciation for this list and the Photo Album site and help me pay the associated

Stus-List Re: Masthead unit for Raymarine I50 dislays

Nate, When I replaced my masthead wind stuff last year, due to failure, it came with a new cable. Your manual should tell you which transducer works. I just tried to download the manual from Raymarine, but my internet is too slow. Try going to the Raymarine site, menu, support, manuals, page3,

Stus-List Re: ABYC Propane standards

023-05-31 14:28, Dave S via CnC-List wrote: > > Going through this as well. Your surveyor and insurance company will > likely recommend a gas detector and a solenoid switch. > > > > Dave > > > > > > > > Sent from my iPhone > > > >> On May 3

Stus-List ABYC Propane standards

I'm swapping out my old CNG 2 burner stove for a propane unit. My question is do I need a fume detector for the new propane system? I know I need a shutoff valve. Thanks in advance Doug Please show your appreciation for this list and the Photo Album site and help me pay the associated bills.

Stus-List Re: New Batteries Last Time I Buy Lead

I have 6 group 27s only because I was to lazy to pull the floor boards and measure. I could've had group 31s. On Tue, May 23, 2023, 09:17 Korbey Hunt via CnC-List wrote: > I quit buying 8D batteries years ago and replaced with type 31. > > Get Outlook for Android >

Stus-List Re: Cabin Ceiling Panels

I replaced my ceiling panels with a nice veneered plywood, and varnished. Made the cabin look great. Doug Mountjoy C Landfall 39 1988 Sabre 34 1983 On Mon, Mar 13, 2023, 14:18 John McCrea via CnC-List wrote: > Hello. I am in the process of pulling all my ceiling panels out so I can > a

Stus-List Re: 35 MK I Mainsheet and Vang

gybed I was able to loosen one while simultaneously tighten the other allowing for a controlled gybe. Email me off list and I can send you a picture. Doug Mountjoy C Landfall 39 1988 Sabre 34 1983 On Mon, Oct 31, 2022, 11:01 CHARLES SCHEAFFER via CnC-List < cnc-list@cnc-list.com> wrote: >

Stus-List Re: Diesel fuel tank cap (Fuel Deck Fill)

I made some spacers out of 1/4 inch G10, epoxied to the deck, over the old holes, redrilled the hole to fit new smaller deck fills. Painted white. They look good, and water is less likely to leak. I got the idea from Wally. I would post a picture, but right now on the summer boat. Doug Mountjoy C

Stus-List Re: erratic and weak rpm

I was having that problem with my old 3qm30. Ended up replacing injectors and having injection pump rebuilt. After that no idle issues, and starting was a breeze. I also hauled up a cable to the compression release levers. Doug Mountjoy C Landfall 39 1988 Sabre 34 1983 On Tue, Sep 6, 2022, 08

Stus-List Re: Is this a C?

It has to be a c The mast is in the middle of the table.  Doug Mountjoy C Landfall 39 1988 Sabre 34 1983 On Wed, Aug 24, 2022, 06:33 Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote: > > > > https://annapolis.craigslist.org/boa/d/annapolis-cc-30-sloop-sailbo

Stus-List Re: Conduit Size for C 30 Mark 1 ?

When I rewired my mast I used 2 1inch conduits. One only went to the spreaders, the other was full length. One mistake I did was to use duplex wire for the lights. The sheathing took up too much room. But I don't have any slapping. Doug Mountjoy C Landfall 39 1988 Sabre 34 1983 On Fri, Aug 19

Stus-List Re: [EXTERNAL] Bed-It butyl tape

I always called the Pacer a Pregnant toad. Doug Mountjoy C Landfall 39 1988 Sabre 34 1983 On Sat, Aug 6, 2022, 08:36 leewardrail hotmail via CnC-List < cnc-list@cnc-list.com> wrote: > Hehe. A buddy in High school had a brand new, puke yellow, Merc Bobcat. No > room for much mo

Stus-List Re: No recent mail

My autopilot isn't connected on my new to me Sabre 34. Electronic tech said I needed a new coarse computer Doug Mountjoy C Landfall 39 1988 Sabre 34 1983 On Sun, Jul 24, 2022, 11:10 Joe via CnC-List wrote: > My alternator belt broke if that counts as a problem. > Joe > coquina &

Stus-List Re: Sea Foam

and high pressure pump. Until I heard that. Doug Mountjoy C Landfall 39 Sabré 34 On Mon, Jul 18, 2022, 07:11 Bill Coleman via CnC-List wrote: > Wondering what you are trying to achieve, as I was just about to start a > discussion on white smoke. I am thinking that has more to do with u

Stus-List Re: Barient 26 winch questions

If I remember correctly Hutton marine in Australia carries winch parts. Shipping is fairly quick. I got springs, and a bunch of other parts from them. On Wed, Jul 13, 2022, 11:22 Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > Does anyone know the drum diameter of the Barient 26s

Stus-List Re: 37+forward hatch - Lewmar Ocean 70?

Josh, When i replaced my hatch glass. I used the same thickness as the side windows.  I think it was 3/8. As for the sealant. I used dow corning 795. I rounded the edges slightly, more on the bottom than on the top. You will want to keep the plexi glass cool and out of the sun as much as

Stus-List Re: Checking the list

Thats a good one.I'm madly preparing for my departure from the PNW for my trip down the west coast to participate in the 2021 BAJA HA-HA. and follow in the "foot steps" of Wally. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard,  WAsv Rebecca Leah1988 C LF39 

Stus-List Re: Checking the list

Gladvyou came out alright, and everyone is ok. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard,  WAsv Rebecca Leah1988 C LF39  Original message From: "Dennis C. via CnC-List" Date: 8/1/21 6:50 PM (GMT-08:00) To: Stus-List Cc: "Dennis C."

Stus-List Re: [EXTERNAL] Re: Broken Bolt in Epoxy

I won't get into an epoxy airplane. If it's not boeing. I'm not going. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard,  WAsv Rebecca Leah1988 C LF39  Original message From: John Christopher via CnC-List Date: 7/23/21 1:20 PM (GMT-08:00) To:

Stus-List Re: Stuffing Box

Why would you want to? Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard,  WAsv Rebecca Leah1988 C LF39  Original message From: Stephen Thorne via CnC-List Date: 7/12/21 5:43 PM (GMT-08:00) To: cnc-list@cnc-list.com Cc: Stephen Thorne Subject:

Stus-List Re: Anchor

A 35# spade or excel are both top notch anchors. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard,  WAsv Rebecca Leah1988 C LF39  Original message From: Korbey Hunt via CnC-List Date: 7/11/21 5:13 AM (GMT-08:00) To: Stus-List Cc: Korbey Hunt

Stus-List Re: Insurance survey cost

 $624 for out of water insurance survey.  Port Townsend EA. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard,  WAsv Rebecca Leah1988 C LF39  Original message From: Joel Delamirande via CnC-List Date: 7/5/21 10:06 AM (GMT-08:00) To: Stus-List Cc:

Stus-List Re: From Richard 30/40+

I fabricated a holding tank out of fiberglass. The old one was made from stainless and had corroded through. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard,  WAsv Rebecca Leah1988 C LF39  Original message From: John and Maryann Read via CnC-List

Stus-List Re: Sail west coast

: 6/30/21 6:57 PM (GMT-08:00) To: Stus-List Cc: Doug Mountjoy Subject: Re: Stus-List Sail west coast What's the vessel? Get Outlook for Android From: Doug Mountjoy via CnC-List Sent: Wednesday, June 30, 2021 4:07:16 PM To: cnc-list@cnc-list.com Cc: Doug Mountjoy Subject: Stus-List Sail west

Stus-List Sail west coast

I am doing the Baja-haha this year, and am looking for crew for the run down the west coast. My plan is to harbor hop seeing the sites along the way. Stopping almost every night. I plan on leaving the last week in August.  Arriving in San Diego around the first of October. If you're interested

Stus-List Port Townsend

MartinAre you in Boat Haven with Calypso?I'm hauling out today. Will be here for a few days. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard,  WARebecca Leah1988 LF39 Thanks to all of the subscribers that contributed to the list to help with the costs involved. If

Stus-List UFO noise update

I just wanted to give an update on my UFO noise. It turned out to be my boom lift. I had it tight to slow down boom swing. Now the boom swings, but no UFO's. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard,  WARebecca Leah1988 LF39 Thanks to all of the subscribers

Stus-List Re: Gelcoat colour matching

rt Orchard,  WARebecca Leah1988 LF39  Original message From: dwight veinot via CnC-List Date: 5/23/21 12:33 PM (GMT-08:00) To: Stus-List Cc: dwight veinot Subject: Stus-List Re: Gelcoat colour matching Are you totally sure about thatOn Sun, May 23, 2021 at 12:55 PM Doug Mountj

Stus-List Re: Gelcoat colour matching

Be advised, Gel coat is Polyester based and will not adhere to epoxy, but epoxy will adhere to polyester and or vinyl ester based fiberglass. Gel coat will also work with vinyl ester based fiberglass. Doug On Sun, May 23, 2021 at 8:17 AM Graham Collins via CnC-List < cnc-list@cnc-list.com>

Stus-List Re: UFO NOISE

Date: 5/18/21 6:50 PM (GMT-08:00) To: Doug Mountjoy Cc: Stus-List Subject: Re: Stus-List Re: UFO NOISE Lol- well, if enough time has passed an apology and flowers might be a start. Dave   (Evening spent proactively doting on my 33-2)Sent from my iPhoneOn May 18, 2021, at 9:40 PM, Doug

Stus-List Re: UFO NOISE

proactively doting on my 33-2)Sent from my iPhoneOn May 18, 2021, at 9:40 PM, Doug Mountjoy wrote:That is a possibility but nothing changed from last fall. Except for the fact I was not home to dote on Rebecca Leah. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard

Stus-List Re: UFO NOISE

iPhoneOn May 18, 2021, at 8:18 PM, Doug Mountjoy via CnC-List wrote:For the past couple of months I have had a harmonic noise that sounds like a UFO. It appears to be coming from the mast, but only with a wind blowing, light or otherwise.Being moored across the bay from Puget Sound Naval Shipyard

Stus-List Re: UFO NOISE

m the deck...silence. Probably not a UFO causing your rig singing...now you have to figure out how to stop the rig from resonating in the wind?  Rob Abbott AZURA C 32 - #277 Halifax, N.S. On 2021-05-18 9:18 p.m., Doug Mountjoy via CnC-

Stus-List UFO NOISE

For the past couple of months I have had a harmonic noise that sounds like a UFO. It appears to be coming from the mast, but only with a wind blowing, light or otherwise.Being moored across the bay from Puget Sound Naval Shipyard first few  times I heard it, had me looking outside for UFOs. I

Stus-List Re: 3HM35F oil capacity puzzle

. Bush Law Offices 2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220-1462 502-584-7255 -Original Message- From: Doug Mountjoy via CnC-List To: Stus-List Cc: Doug Mountjoy Sent: Sun, May 16, 2021 10:33 pm Subject: Stus-List Re: 3HM35F oil capacity puzzle

Stus-List Re: 3HM35F oil capacity puzzle

Diesel engines typically have a larger oil sump than a gas engine of the same size. That being said. A lot of the time engine manuals list total oil capacity. What would be added after an overhaul. You could have undrainable oil left behind, what might be in a cooler, turbo etc. If you change

Stus-List Re: handrail

Bo, Hate to say this, but it looks like wet balsawood. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard,  WARebecca Leah1988 LF39  Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the

Stus-List Re: clogged head hoses

I will never go to a composting head. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard,  WARebecca Leah1988 LF39  Original message From: Neil Andersen via CnC-List Date: 5/5/21 12:31 (GMT-08:00) To: 'Stus-List' Cc: neil.eric.ander...@gmail.com

Stus-List Re: clogged head hoses

dad (builder of many boats) he advised that polyester resin is permeable to odours, and to make sure the inside of the tank is well coated with epoxy resin.Dave33-2On Mon, 3 May 2021 at 12:33, Doug Mountjoy via CnC-List wrote:Good Morning All,I am in the process of replacing my Stainless steel

Stus-List Re: [EXTERNAL] clogged head hoses

YCPort Orchard,  WARebecca Leah1988 LF39  Original message From: "Della Barba, Joe" Date: 5/3/21 09:46 (GMT-08:00) To: Stus-List Cc: Doug Mountjoy Subject: RE: [EXTERNAL] Stus-List clogged head hoses Vinegar is your friend. At this point you will be replacing them

Stus-List Re: clogged head hoses

  Original message From: Peter McMinn Date: 5/3/21 09:48 (GMT-08:00) To: Stus-List Cc: Doug Mountjoy Subject: Re: Stus-List clogged head hoses SEW CleanThis is a non-toxic descaler that fr us has proven its weight In gold.Living aboard during this project must

Stus-List clogged head hoses

Good Morning All, I am in the process of replacing my Stainless steel holding tank, due to holes that are a result of corrosion. This is requiring me to make one out of fiberglass. No one makes a tank this size and shape needed. This led me to checking the hoses for condition. I found that the

Stus-List Re: Glassing Over Instrument Holes Through Double Bulkheads

Glass over the outside hole, and hang a picture over the inside. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard,  WARebecca Leah1988 LF39  Original message From: Randal Stafford via CnC-List Date: 4/20/21 14:39 (GMT-08:00) To: Stus-List Cc:

Stus-List Re: 35mk2 3.5" masthead sheaves

Try Zypherworks.com. great company. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard,  WARebecca Leah1988 LF39  Original message From: Shawn Wright via CnC-List Date: 4/15/21 13:12 (GMT-08:00) To: Stus-List Cc: Shawn Wright Subject: Stus-List

Stus-List Re: White vinegar

spray it on your canvas and it keeps away the green. plus it makes your boat smell like a salad. On Thu, Apr 1, 2021 at 8:01 AM Fred Hazzard via CnC-List < cnc-list@cnc-list.com> wrote: > As senior citizen I suffer from the dreaded malady > CRS. > Yesterday while visiting Fury I found a gallon

Stus-List Re: Panel rewire

looks great. want to come do my panel? haha On Wed, Mar 31, 2021 at 5:46 PM Adam Hayden via CnC-List < cnc-list@cnc-list.com> wrote: > Hello > > You may remember a few months ago I asked some questions about rewiring > the panel. I appreciate the advice at that time. After approx 50 hours I >

Stus-List Re: water tanks interconnected, or not?

I used a couple of float senders, wired thru a 2 pole switch to a single level gauge, one pole for each tank sender. The switch is a momentary on type. The float senders are plastic with a float that slides up and down the housing. I wish I could remember where I got them. The gauge is just a 2in

Stus-List Re: Dodged a bullet.

Thank God your ok. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard,  WARebecca Leah1988 LF39  Original message From: Tom Buscaglia via CnC-List Date: 3/29/21 18:56 (GMT-08:00) To: Stus-List Cc: Tom Buscaglia Subject: Stus-List Dodged a bullet.

Stus-List Re: C 40

I have used that chart on the CNCphoto album. When I upgraded from my LF38 to the LF39 though there was no info for the LF39. I can say that Rebecca Leah takes a gale force wind and will plow through anything.  A very smooth and dry ride. Sent from my T-Mobile 4G LTE Device Thanks to all of the

Stus-List Re: Panel rewiring

Adam, You can do it either way. Using a buss bar, a terminal strip (which will require jumpers between circuits), or you could use a fuse block. The later will protect each individual circuit.

  1   2   3   >