Hello:
I have a 1985 CNC 33-2. I have been using the same main halyard for the
last three years. Every winter I connect a line to it and pull it up and
store the main halyard in the mast over the winter. I went to bring it
down it does not want to come down. I am able to pull it down 6" and
Hello, I have a 1985 C 33-2. I am looking to replacement my bilge pump
and looking for a recommended model. Anyone with some insight to what is
the best. I would greatly appreciate it.
Thanks,
Ray Macklin
LakeHouse
Milwaukee, WI
Thanks to all of the subscribers that contributed to the list to
Everyone:
For the past several years, at the beginning of the season, I have been
sanding the bottom and have painted it with VC-17. I am no longer going
to be racing. It is fresh water boat. I am reaching out to determine what
bottom paint i should go with that is less work every year.
Ok everyone. I am stepping up and finally going to replace my windows. I
am open to any information or suggestions. I was thinking of replacing
them with aluminum frame windows. Any thoughts or guidance with this
project. All input is appreciated.
Thanks
Ray Macklin
LakeHouse
Milwaukee WI
I am in the process of changing my head in my 1985 C 33-2 and since the
hose connected to the head and the waste tank was old. I figured I would
replace that to while I am at it. Questions:
1. Is the original waste hoses Shields 310 Fuel Hoses?
2. If they are, why did C use a Very Very Very
Hello:
I have a 1985 C 33 and i am looking to replace the manual toilet. I
want to replace it with one that has the same foot print for fastening it.
Does anyone know what i can replace it with to match and where could locate
one? The old paperwork indicates it might have been a W.C Marin
Hello:
1985 C 33-2. I misplaced the part on the mast that holds the sail slides
in the mast track. Does anyone know where i can get a replacement?
Ray Macklin
LakeHouse
Milwaukee WI.
___
Thanks everyone for supporting this list with your
Hello:
1985 C 33-2. I misplaced the part on the mast that holds the sail slides
in the mast track. Does anyone know where i can get a replacement?
Ray Macklin
LakeHouse
Milwaukee WI.
___
Thanks everyone for supporting this list with your
1985 C 33-2 and I am looking to do maintenance on two Barient 23 Winch,
Number 3985340. I have never taken apart one. I am reaching out for
advise and guidance, instructions, part replacements , grease brand and any
other help in completing this project would be greatly appreciated.
Thanks,
Ray
Hello:
I have a 1985 C 33-2
With the different types of cords and cost, I am looking for some advise
for what thickness and brand i should use when changing the stuffing box.
Any advise or instructions would be greatly appreciated.
Ray
LakeHouse
Milwaukee, WI
I have two batteries that I am looking for information on how to Maintain
my batteries over the winter. What charger to purchase and process to
follow. Any information would be greatly appreciated.
Thanks,
Ray
LakeHouse
Milwaukee, WI
___
Thanks
t/plain; charset="utf-8"
>
> Ray ? are these Raymarine ST50/ST60 instruments by any chance? If so,
> they?re all powered (and share data) over SeaTalk1 cabling. There should
> be a power drop from the first instrument in the chain that runs to your DC
> panel and a bre
Everyone:
Nice sunny day breezy day in Milwaukee. It would probably help tell what
my wind direction, depth and speed was if my instruments had power.
I finished the season with everything working. I tested everything and
they only thing that is not working is my wind/speed/ depth.
I never
Thanks everyone for the information. I have documented the details of what
everyone has said. One final question, it might be dumb but, where do I
light the stove and how.
Thanks,
Ray
LakeHouse
On Wed, Jun 13, 2018 at 7:37 AM, wrote:
> Send CnC-List mailing list submissions to
>
Hello:
It is that time of season for the big Splash. I have run into an issue
since I put it in the water. My bilge pump is running continuously. I
took a close look and I am noticing the water is seeping in from the walls
of the bilge. Prior to launching I took a real close look at the keel.
I am needing to replace my companionway door on my 33. Does anyone know
where I might find one to purchase or suggestions on how to replace it.
Thanks,
Ray Macklin
LakeHouse
Milwaukee, WI
___
This list is supported by the generous donations of our
Hello:
I am looking to purchase a Mast Ladder by Kinleven marine and I need to
determine what model number are for the sail slides. They reference
examples R7.2; R8.3; R11.4; F16; F19; F22; HR10.4; HR13.9 are just some of
them. Does anyone have an idea or is anyone looking to sell one.
Thanks,
I have a 1985 C 33. I have a question regarding water in the bilge
area. I just put my boat in to start the season. I found that my Bilge
Pump Float switch was not working. I also found that with the boat sitting
in the water, the bilge filled up with water in quite a short time (like it
about
I have a 1985 C and since it is the beginning of the season, I figure
it is time to replace the leaky windows. Can you provide me your opinion
and instructions of replacing the windows. We were thinking of the
aluminum frame so we can get some ventilation inside the cabin.
Thanks,
Ray
LakeHouse
I am not familiar with the cradle process and wanted to know how do I get
or find a cradle for my 1985 C 33-2?
Ray Macklin
LakeHouse
Milwaukee, WI
___
This list is supported by the generous donations of our members. If you like
what we do, please help
I have a 1985 C 33-2 and need to replacement my windows. I am looking to
go the route of replacing them with windows that open. Has anybody
replaced windows this way before. If so, can you share your thoughts along
with the type of window you used.
Thanks,
Ray
LakeHouse
Milwaukee, WI
I have a 1985 C 33-2. Every year when i take the boat out of the water,
the cooler drains and is empty. This year it did not do that. Also last
year the water in the head was not draining either. Now the question is
where is the problem. Not sure about the plumbing of the cooler. Any
guidance
I have a CC 33 - 1985 that i have reach the point of either replacing
the portlights. I currently have the plexiglass that is screwed in
and they are starting to leak. Ideally I would like to replace them
with one that can be opened for cross-ventalation. Not sure if that
can be done. Does
]
*From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Raymond
Macklin via CnC-List
*Sent:* Thursday, August 14, 2014 5:08 AM
*To:* cnc-list@cnc-list.com
*Subject:* Stus-List 2GM20F Engine will not start - Possible Fuse Issue.
Hello:
I have a 1985 CC 33-2 with a Yanmar
Hello:
I have a 1985 CC 33-2 with a Yanmar, Diesel 2GM20F engine. I was sailing
last night and started the motor like normal to get out of harbor.
However, when I went to come back in to the harbor. I proceed to follow
my normal process. I put the transmission in Neutral and reached down to
I have a 1985 CC 33-2. I just noticed that the sink in the head was
backing up. The sink has not been used at all. What would cause this?
What is the plumbing configuration and are there any diagrams available?
Any help is greatly appreciated.
Thanks,
Ray
LakeHouse
Libertyville IL
Is there is a recognized process to pump out the head to avoid lingering
odors. I have heard people will run a hose at the same time as they are
pumping it out. Anything that can help would be greatly appreciated.
Ray
LakeHouse
Libertyville, IL
___
Anyone:
I have 1985 CC-33-2 and in the front of the mast there is around a one
inch plastic insert that runs the length of the mast. What is this for.
If it is for a T-Track then what is the width of the track that belongs on
the boat? Any information would be great.
Ray
LakeHouse
Who was the Manufacturer of the 1985 - CC 33-2 Mast and how would I reach
them?
Ray
LakeHouse
Libertyville
___
This List is provided by the CC Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing --
I have a 1985 CC 33 and I am looking to store my Forespar Whisker pole on
the mast. I determined that the 1 1/2 T-Track will fit into the slot on
the front of the mast if i remove the plastic insert. (see picture) The
issue i have is finding the fasteners that will hold the T--Track to the
mast
30 matches
Mail list logo