cnc-list@cnc-list.com

Hi Bill, If a product is brought over for commercial purposes only the GST is required. The person importing the product will fill out the appropriate customs form, I cannot remember the number off hand, but the importer requires a business number, they are essentially acting as a broker. My c

Re: Stus-List Merriman snatch block question

Contact Zephyerwerks, that guy can fix you up if it is fixable. Tom Power Invictus C&C 30 MK1 Fredericton, NB From: CnC-List on behalf of Josh Muckley via CnC-List Sent: Tuesday, April 9, 2019 6:38 PM To: C&C List Cc: Josh Muckley Subje

Re: Stus-List Mast Wire Question

That is interesting. I have a 30 MKI and there is no "Ground" or bonding wire up the mast. I'm under the impression the mast will bond with the step. On my mast step there is a provision for a bolt that connects to my bonding set up. Could it be for something like SSB? Tom Power

Re: Stus-List Fresh water flush...

I'm doing this now to my 30 MKI. I plan to isolate the tank in the v berth and use it for the electric flush. Tom Power Invictus C&C 30 MK1 Fredericton, NB From: CnC-List on behalf of David via CnC-List Sent: Tuesday, February 12, 2019

Re: Stus-List Tablet for navigation

Hi Bruce, I was thinking of using a Samsung tablet also. Do you happen to sail offshore, If so are you still able to run a Nav program in real time when out of range of cell and wifi? Cheers, Tom Power Invictus C&C 30 MK1 Fredericton, NB __

Re: Stus-List Tablet for navigation

lt;mailto:n...@sjyachts.com> From: CnC-List mailto:cnc-list-boun...@cnc-list.com>> On Behalf Of T power via CnC-List Sent: Monday, January 14, 2019 7:50 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: T power mailto:sv_invic...@outlook.com>> Subject: Stus-Li

Re: Stus-List Tablet for navigation

t Tablet for navigation Tom No. You don’t need to activate the cell plan. The GPS antenna is shared with the cell antenna in the iPad. On Mon, Jan 14, 2019 at 7:51 PM T power via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Hi, I would like to use an ipad mini 2 with the navionics app

Re: Stus-List Tablet for navigation

To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Joel Aronson<mailto:joel.aron...@gmail.com> Subject: Re: Stus-List Tablet for navigation Tom No. You don’t need to activate the cell plan. The GPS antenna is shared with the cell antenna in the iPad. On Mon, Jan 14, 2019 at

Stus-List Tablet for navigation

Hi, I would like to use an ipad mini 2 with the navionics app to plan and use for nav purposes on my boat, this will back up my chart plotter and paper charts. I read that to use the Navionics app on the water to purchase an ipad that has cellular capability. So I'm looking at Best buy and see

Re: Stus-List Propane hose

Bob Boyer s/v Rainy Days C&C Landfall 38 (Hull # 230) (Presently in Charleston SC for the winter) blog: dainyrays.blogspot.com<http://dainyrays.blogspot.com/> email: dainyr...@icloud.com<mailto:dainyr...@icloud.com> On Jan 9, 2019, at 1:22 PM, T power via CnC-List mailto:cnc-list@cnc-list.co

Re: Stus-List Propane hose

aneously. — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( On Jan 9, 2019, at 2:24 PM, T power via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Thanks josh and Doug for you thoughts. The issue I'm running into, it is extr

Re: Stus-List Propane hose

galley, in addition to the fireplace; no issues using them simultaneously. — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( On Jan 9, 2019, at 2:24 PM, T power via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Thanks josh and D

Re: Stus-List Propane hose

where the hose exits your propane locker. Supply hoses connect to the propane appliance using a 3/8" female flare swivel and connect to the solenoid with a 3/8" male NPT adapter. Doug Mountjoy Sv Rebecca Leah LH39 Port Orchard YC wa. Original message From: T power v

Stus-List Propane hose

Hi Everyone, I have a propane question. I'm installing a Dickinson Mediterranean stove with oven and a Dickinson P9000 propane heater. The hose needed for the stove is 12 feet, the hose needed for the heater is 21 feet. My question is will I have enough flow (volume) if I use 1/4 id hose verses

Re: Stus-List Teak treads refinishing

I did mine three years ago, here's what I did; * scraped down to bare wood, two coats of epoxy (special clear). *Two coats of Ephanias gloss varnish. * Taped off the stairs except where I wanted the treads, applied one coat of gloss varnish, sprinkled coarse salt. once dry I washed

Re: Stus-List [EXTERNAL] Mugs

I would be interested in two of them. Shipping to 04491 how can i pay. Get Outlook for Android From: CnC-List on behalf of Della Barba, Joe via CnC-List Sent: Wednesday, December 12, 2018 3:05:43 PM To: 'cnc-list@cnc-list.com' Cc: Della B

Re: Stus-List someone step up, we are down to the scrap value of the keel!

Wow, If I had the cash, it would be a great addition to our Veterans sailing camp, beautiful boat. Tom Power Invictus C&C 30 MK1 Fredericton, NB From: CnC-List on behalf of Joel Aronson via CnC-List Sent: Tuesday, November 13, 2018 4:

Re: Stus-List Shackle for Genoa Sheets?

I use a soft shackle, works awesome, no worry about chafe. Cheers. Get Outlook for Android From: CnC-List on behalf of Edd Schillay via CnC-List Sent: Wednesday, November 7, 2018 4:56:19 PM To: cnc-list@cnc-list.com Cc: Edd Schillay Subj

Re: Stus-List 29 Mk1 Rudder Repair

Check out Andy from boatworks today on youtube. He explains in detail while pouring a new rudder. Tom Power Invictus C&C 30 MK1 Fredericton, NB From: CnC-List on behalf of Paul via CnC-List Sent: Friday, November 2, 2018 9:52 AM To: cn

cnc-list@cnc-list.com

Hi, Thanks for doing the spreadsheet, really cool. If it is not too late could you please add the following; 1973 C&C 30 MK1 Invictus Hull #150 FYC Fredericton NB owned for two years, I have 3 years of sailing experience. Cheers. Tom Power Invictus C&C 30 MK1 Frederic

Re: Stus-List C&C 30 - Cowl vent flexible part

That's an awesome idea!! Tom Power Invictus C&C 30 MK1 Fredericton, NB From: CnC-List on behalf of Jeffrey Nelson via CnC-List Sent: Monday, September 24, 2018 6:32 PM To: cnc-list@cnc-list.com Cc: Jeffrey Nelson Subject: Re: Stus-List

Re: Stus-List 30' mk1 cradle dimensions

Hi Steve, I made a cradle for my '73 C&C 30 MKI. I'm planning to pick it up this weekend to add a couple of extra stands. I can take some measurements for you. what are you exactly looking for? Tom Power Invictus C&C 30 MK1 Fredericton, NB _

Re: Stus-List Lost my prop on 1978 C&C 30 mark 1, need some help replacing it.

My 1973 cc30 mk1 has a 7/8" shaft. My engine is a gas atomic 4 . prop is r/h rotation 11.5 x 8 x 7/8" 2 blade folding prop. Gori props can size you up pretty quick. Good luck Get Outlook for Android From: CnC-List on behalf of Jeremy Co

Re: Stus-List Fun Sailing Videos

My favs are; Sailing Uma Coast Life Bums on a boat Another Adventure Adventure Adrift They keep me sane during the winter months. Get Outlook for Android From: CnC-List on behalf of James Bibb via CnC-List Sent: Wednesday, July 25, 2018

Re: Stus-List Roll pin size

Hi Mike, Thanks for the info and tip on getting them out, I'm definitely going to try pressing them out. Cheers Tom Power<http://aka.ms/weboutlook> Invictus C&C 30 MK1 Fredericton, NB From: CnC-List on behalf of T power via CnC-List Sent:

Stus-List Roll pin size

Hi everyone, I need to replace a foil on my elderly harken furler. They are joined with roll pins, which will need to be drilled out. Anyone have any idea what size they would be. Thanks for any help Tom Power Invictus C&C 30 MK1 Fredericton, NB ___

Re: Stus-List Harken original roller furler parts

Hi Matthew, I would be interested in the jib feeder. Cheers, Tom Power Invictus C&C 30 MK1 Fredericton, NB From: CnC-List on behalf of Matthew L. Wolford via CnC-List Sent: Friday, May 18, 2018 12:08:54 AM To: cnc-list@cnc-list.com

Re: Stus-List Harken original roller furler parts

I'm missing the jib feeder on my Fuler, I would be interested in that for sure Tom Power Invictus C&C 30 MK1 Fredericton, NB From: CnC-List on behalf of Matthew L. Wolford via CnC-List Sent: Tuesday, May 15, 2018 2:42:09 PM To: cnc-lis

Re: Stus-List C&C 30 Mast weight

I have a 1 1/2 ton chin hoist that easily lifts my C&C 30 mast. I had two other people help me move the mast so I would approximate the mast to be maybe 300 lbs. Tom Power Invictus C&C 30 MK1 Fredericton, NB From: CnC-List on behalf of

Stus-List Plumbing help

Hello everyone: I have a bit of an issue on my 1973 C&C 30 Mark 1. my forward water tank underneath the v-berth has two small pieces of copper pipe protruding from the tank, originally it had a hose attached to it that would lead to the pump and the faucets. I would like to change out the hose t

Re: Stus-List New lines and hayalards

ndling the genoa while someone else could be on the spinnaker – lots of elbows in a small area. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of T power via CnC-List Sent: Thursday, January 11, 2018 6:30 AM To: cnc-list@cnc-list.com Cc: T power Subject: Stus-List New lines and

Stus-List New lines and hayalards

Hello everyone, I'm thinking of replacing all of the sheets and halyards on Invictus, hoping for some insight. Dennis of Touche posted a note about color designation that I thought was interesting but I forgot to copy it. Looking for recommendations of size type and color of lines and halya

Re: Stus-List Wrapping LifeSling with Sunbrella

Im going to do the same thing. Check out sailrites video series. They show this step by step. Get Outlook for Android From: CnC-List on behalf of Joel Aronson via CnC-List Sent: Friday, January 5, 2018 2:57:05 PM To: cnc-list@cnc-list.co

Re: Stus-List Bilge Pump Drain Location

Hi Steve, My bilge pump exit is upper starboard side of the transom, I'm sure it is original as the boat only had one previous owner before me. Cheers Tom Power Invictus C&C 30 MK1 Fredericton, NB From: CnC-List on behalf of Steven

Re: Stus-List Holiday wishes

Merry Christmas and thanks helping this newbi with refitting my boat. This group is awesome. Get Outlook for Android From: CnC-List on behalf of bushmark4--- via CnC-List Sent: Friday, December 22, 2017 10:39:55 AM To: cnc-list@cnc-list.

Re: Stus-List new haylards

Wow, thanks for all the insight on my halyard question, I really appreciate the help. Being new to sailing, I think it would be very easy for me to pick an inferior product with drastic effects in unsavory weather, so again, thanks. Tom Power Invictus C&C 30 MK1 Frede

Stus-List new haylards

Hi Everyone, I'm looking to replace my foresail and headsail halyard on my C&C 30 MKI, my foresail is a combination of wire and rope. The boat is used by new sailor for cruising. Any help would be greatly appreciated. Cheers Tom Power Invictus C&C 30 MK1 Frederict

Re: Stus-List Serial number

Cool information, I gotta check mine out. Tom Power Invictus C&C 30 MK1 Fredericton, NB From: CnC-List on behalf of Jack Fitzgerald via CnC-List Sent: Tuesday, October 24, 2017 10:48 AM To: C&CList Cc: Jack Fitzgerald Subject: Re: Stus-

Re: Stus-List fittings for water tank

king out may be meant for hose too go over and clamp Sent from my T-Mobile 4G LTE Device Original message ---- From: T power via CnC-List Date: 10/23/17 5:08 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: T power Subject: Stus-List fittings for water tank Hi Everyone, I have a qu

Stus-List fittings for water tank

Hi Everyone, I have a question that I'm struggling with. I have a 1973 C&C 30 MKI, there is a water tank under the vee berth and under the starboard settee. Both tanks have two small tubes protruding out about 2 inches. From I can see they look like copper tubing, I'm wanting to change the tubi

Re: Stus-List Garhauer Story...

Really cool history. Get Outlook for Android From: CnC-List on behalf of John Irvin via CnC-List Sent: Monday, September 18, 2017 12:25:39 PM To: cnc-list@cnc-list.com Cc: John Irvin Subject: Re: Stus-List Garhauer Story... Thanks for po

Re: Stus-List horn

Stus-List horn Not a funny question. A horn handy to your reach could save you from a nasty situation. I have a single drink holder by SnapIt on my steering pedestal guard that I keep a canister horn. Dennis C. Touché Sent from my iPhone On Sep 20, 2017, at 6:39 PM, T power via CnC-List

Stus-List horn

So here is a funny question from a new sailor, anyone have a suggestion on placement of a fixed horn on a C&C 30 MKI. I was a power boater before and it was always on deck. Do sailboats even have horns or do you rely of the canister horns. Cheers. Tom Power Invictus C&C

Re: Stus-List Cradle measurements

onable length of the vertical support. I bet we have a cradle for your boat in our Club, but finding it and measuring is all but impossible (it would be one of about 500 cradles in the storage). Good luck Marek From: CnC-List mailto:cnc-list-boun...@cnc-list.com>> on behalf of T power

Re: Stus-List Cradle measurments

a CnC-List Sent: Friday, September 15, 2017 11:59 PM To: cnc-list@cnc-list.com Cc: Matthew L. Wolford Subject: Re: Stus-List Cradle measurments When we made mine, we hung the boat in a travelift for a couple days while the fabricator built the cradle around the boat. From: T power via CnC-List<m

Stus-List Cradle measurments

Hello, I have a C&C 30 that will require a cradle in a couple of weeks. I have made the base and the keel rest. I'm struggling with the length of the stands and wondering if I could get some insight. My cradle is 14' long by 77" wide, I have a 10" wide "C" channel keel bed that is 62 1/2" long

Re: Stus-List teak wood to the cockpit

Mine was attached to the cockpit with screws and silicone, it was a mess. I'm thinking of sealing the screws with 4200 with butyl tape between the teak and fiberglass. Would 4200 be adequate or is there a better product that could be used. Cheers Tom Power Invictus C&

Re: Stus-List teak wood to the cockpit

Im about to do the same thing. Would butyl tape work? Get Outlook for Android From: CnC-List on behalf of Franklin Schenk via CnC-List Sent: Thursday, September 7, 2017 9:04:43 PM To: cnc-list@cnc-list.com Cc: Franklin Schenk; Bev Parslow

Re: Stus-List Closed the deal

Congrats, lots of fond memories ahead Tom Power Invictus C&C 30 MK1 Fredericton, NB From: CnC-List on behalf of schiller via CnC-List Sent: Friday, September 1, 2017 10:21 PM To: cnc-list@cnc-list.com Cc: schiller Subject: Stus-List Cl

Re: Stus-List 1980 C&C 30 purchase queries

I have a 1973 MKI . great boat. Solid hull. Last year when i bought it. I sanded adout 4 layers of old bottom paint, found about 4 pin sized blisters, had the rest of the paint removed by soda blasting. That reveled a few thousand pin sized blisters. Some epoxy, lots of sanding. Followed by barr

Re: Stus-List macerator switch

d rivers do not qualify as 3 miles offshore, but I could be mistaken. KD On Tue, May 9, 2017 at 4:03 AM T power via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Thanks Jim for the help. I found out quickly that changing the pump is not on my list of fun things to do 😊. Would you reco

Re: Stus-List the foam monster that ate the v-berth

I also have the original 1973 cushions that need replacing. I like the idea of the memory foam option. Is there any problem with the cushion holding moisture from humidity. I plan to put something under the cushion like dri-deck tiles. Cheers, Tom Power Invictus C&C

Re: Stus-List macerator switch

y, etc Cheers From: CnC-List [mailto:cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>] On Behalf Of T power via CnC-List Sent: Monday, May 08, 2017 2:53 PM To: Indigo via CnC-List Cc: T power Subject: Stus-List macerator switch I currently have a maceration pump that has a

Stus-List macerator switch

I currently have a maceration pump that has a momentary switch located next to it under the sink. I believe this was installed by the previous owner. I would like some opinions on the best place to install the new switch. Is it common to have the CB on the distribution panel handle this operatio

Re: Stus-List AIS and MMSI as well as marine radio use in Canada

My boat has a registered AIS and MMSI. Easy to do online I did not require any license, nor do I have one. Cheers. Tom Sent from Outlook From: CnC-List on behalf of Andrew Burton via CnC-List Sent: Sunday, April 9, 2017 8:06:16 PM T

Re: Stus-List Transducer help

Wow, Thanks for all the reply's and the welcome. Thanks Fred for the great explanation. I think the best option will be to purchase a new gauge pack. I'll let everyone know how it goes. Sent from Outlook From: CnC-List on behalf of Jo

Re: Stus-List Second bilge pump

nd the exit hose exiting out of the port side just under the rub rail in the area near the winch. I added an electric pump in the lowest part of the bilge with the hose running back to be next to the other one. Gary 1980 - #593 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of

Stus-List Transducer help

Hi all, First off, I'm really new to sailing so there is a steep learning curve for me. I own a C&C 30 MKI that currently has a depth, speed, and wind gauges, they are round, I think they are made by signet?? I have a new Raymarine eS128 Chart plotter that I would like to install. I have no id

Stus-List Second bilge pump

Hello everyone, I own a 1973 C&C 30 MKI which I'm looking for some advise. I currently have one bilge pump, I would like to install a second pump, looking for advice on size to install. Thanks, Tom Sent from Outlook ___ T

Re: Stus-List Exterior Teak Varnish Recommendation?

Any thoughts on this process. https://www.youtube.com/watch?v=mNz16sRdpFY&index=3&list=PLLD81Ey5nuIoof2Y9lL-sDWeorU3g7fpZ [https://i.ytimg.com/vi/mNz16sRdpFY/hqdefault.jpg] INTEGRITY FINISHING INC, Boat

Re: Stus-List caulk question and West 6-10 to the rescue

my apologies for the newbi question, can the West 6-10 be used to fill areas where the wet balsa core is scrapped out. I'm rebedding some hardware and repairing a few soft spots. Thanks Sent from Outlook From: CnC-List on behalf of St

Re: Stus-List Deteriorated mast step

' 35-1 #83 Mandeville, LA On Feb 11, 2017 6:24 AM, "T power via CnC-List" mailto:cnc-list@cnc-list.com>> wrote: Hi, I own a C&C 30 MKI that has a badly eroded aluminum mast step, is there a place where I can get a replacement. Thanks for any help. Cheers, Tom Sent fr

Re: Stus-List Deteriorated mast step

: Stus-List Deteriorated mast step Try South Shore Yachts. http://southshoreyachts.com/ From: T power via CnC-List<mailto:cnc-list@cnc-list.com> Sent: Saturday, February 11, 2017 8:23 AM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: T power<mailto:sv_invic...@outlo

Stus-List Deteriorated mast step

Hi, I own a C&C 30 MKI that has a badly eroded aluminum mast step, is there a place where I can get a replacement. Thanks for any help. Cheers, Tom Sent from Outlook ___ This list is supported by the generous donations of