Re: Stus-List VHF says low battery

Follow Fred's advice.  I did and very happy.  Bill Walker CnC 36Pentwater, Mi Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet -- Original message--From: Frederick G Street via CnC-List Date: Tue, Sep 6, 2016 8:30 AMTo: cnc-list@cnc-list.com;Cc: Frederick G Street;Subject:Re: Stus-List

Re: Stus-List Transmission/prop woes

Thanks all for replies.  On investigation this morning it seems the shaft pulled out of the connector to transmission.  The two "keeper" bolts were still in place and wired so as to not vibrate loose.  The key was in the bilge, mangled, under the connection of shaft and tranny.  The zinc on

Re: Stus-List Transmission/prop woes

Hurth, ugh.Bill Walker Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet -- Original message--From: wwadjo...@aol.com via CnC-List Date: Thu, Jun 30, 2016 7:24 AMTo: cnc-list@cnc-list.com;Cc: wwadjo...@aol.com;Subject:Stus-List Transmission/prop woes Good Morning,I have yanmar

Stus-List Transmission/prop woes

Good Morning,I have yanmar 3gm30 with Kanzaki Birth KH18 gearbox. Two blade Max Prop.Saturday after race when started engine and placed in gear no forward or reverse.  Went below and had someone shift neutral, forward, neutral, reverse.   I could see prop shaft turning.  Buttoned up and worked

Re: Stus-List Best self tailing primary winch replacement for 35 Mk II

Ditto ST 48s on my 36, love them.   Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet -- Original message--From: Jim Watts via CnC-List Date: Fri, May 27, 2016 12:45 PMTo: 1 CnC List;Cc: Jim Watts;Subject:Re: Stus-List Best self tailing primary winch replacement for 35 Mk II I put Lewmar

Re: Stus-List My Experience and Mistakes With Interlux

I kiwi gripped my cockpit sol three years ago.  Too many years of feet of guys grinding the winches.  Anyway, go to home depot.  Get pair color c hips.  Match your cockpit.  Take white kiwi grip to home depot and they will tint for free.   Talk nice.  Kiwi grip sends how to instructions and

Re: Stus-List My Experience and Mistakes With Interlux Brightside/Interlux Prekote

Spectacular!Bill Walker cnc 36. Pentwater, Mi Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet -- Original message--From: Ryan Doyle via CnC-List Date: Thu, May 26, 2016 11:46 AMTo: cnc-list@cnc-list.com;Cc: Ryan Doyle;Subject:Stus-List My Experience and Mistakes With Interlux

Re: Stus-List Removing Polyglow

Spend lots of time prepping.  As in most finishes, its about the prep.  Bill Walker Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet -- Original message--From: Paul Baker via CnC-List Date: Wed, May 18, 2016 6:59 PMTo: cnc-list@cnc-list.com;Cc: Paul Baker;Subject:Re: Stus-List Removing

Re: Stus-List Removing Polyglow

I don't use on my 36, but do use it on a power boat which has a navy hull.  I used to wax and polish and it looked like neck a week after launch.  Poliglowed last year and very happy.  Stays nice looking even after a year.  But I wouldn't do my cnc since gelcoat is still niceBill WalkerCnc

Re: Stus-List electronics

Just received my new standard horizon a is chef radio and ram Mic from Fred Street.   Don't know why any of us would buy through anyone else.  Bill WalkerCnC 36pentwater, mi Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet___ This list is supported

Re: Stus-List Propane water heater

I have this precision temp unit in my cnc 36.  Installed myself no problem five years ago.  Folks were very helpful.  It was a little cheaper then but not much.  I toured factory at time.  Impressed.  Bill WalkerEvening StarPentwater, Mi Sent from my LG G Pad F™ 8.0, an AT 4G LTE

Re: Stus-List Rudder collar "donut" removal

Eric,    That is a Delton or some other material spacer which acts as bushing to protect top of rudder shaft tube.  No problem but looks like you might want to replace.  They wear.  Hope to see you in Pentwater this summer.    Bill Walker Sent from my LG G Pad F™ 8.0, an AT 4G LTE

Re: Stus-List Rudder collar "donut" removal

Is it possible that a PO doubled up the set screws?  Bill WalkerCnC 36 Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet ___ This list is supported by the generous donations of our members. If you like what we do, please help us pay

Re: Stus-List Removing Cabin-Top Handrails

Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet On a 1981 36' the handrails are through bolted with 3 inch machine screws and washers and nuts.  Remove headliner panels to access.  Very sturdy.  Bill Walker This communication is confidential. We only send and receive email on

Stus-List Lake Michigan CnC Rendezvous

Any Lake Michigan listers interested in a LM meet up?  Pentwater Mi Would be central.  So would Wisconsin shore.  Just sayin' we can't let the coasters have all the fun!  Bill WalkerEvening StarCnC 36Pentwater, Mi. Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet

Re: Stus-List Garmin Gwind

I have got wired version of gwind.  What do you need to know?Bill WalkerEvening StarCnC 36 Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet -- Original message--From: Pete Shelquist via CnC-List Date: Mon, Apr 4, 2016 9:50 PMTo: cnc-list@cnc-list.com;Cc: Pete

Re: Stus-List Stus List - Speaking of anchors

Danny,  I think you need to get rid of It immediately.  I have read on the internet that owning multiple anchors can be hazardous to your health.  I will send offlist my mailing address.  Bill WalkerCnC 36Pentwater, Mi Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet --

Re: Stus-List Running lines aft to cockpit on C 34

Dennis,    Thanks for your response, all on point.  I always wondered why my halyards were reversed from every other boat I have ever owned.  The port rounding of marks explanation makes sense and is probably the correct answer since my boat was raced harder than I do in previous

Re: Stus-List {} smaller wheel

Gary Contact me direct please at wwadjour...@gmail.com Re wheel Bill Walker Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet -- Original message--From: Gary Newton via CnC-List Date: Fri, Mar 4, 2016 5:35 PMTo: cnc-list@cnc-list.com;Cc: Gary Newton;Subject:Re: Stus-List {}

Re: Stus-List Soft shackle

Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet Marek,  Properly made a soft shackle will only get tighter by flogging.   Honestly, I have used for several years and no issues, yet easy to remove and do not hang up on baby stay. Certainly will not let go even easier than bowline

Re: Stus-List Stus list Soft shackle

Francis, I will give you that is  simple, but with two sheets each attached by soft shackle you can remove lazy sheet and attach to a different sail prior to hoist if need be.   Bill Walker   Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet -- Original message--From:

Re: Stus-List Soft shackle

The knot is very small compared to any knot you are using to tie on a sheet, plus you have two knots.  Buy some dyneema and give it a try  I bought some appropriate sized knitting needle at Wal-Mart and cut off the ends for fids.  Works great.  You won't to backThat said, it is very

Re: Stus-List Soft shackle

John,  I have used for several years.  Go on utube and look for how to.   Not hard to make,  all mine home made on a rainy day.    No hang ups at all on baby stay .   recommend. Bill WalkerCnC 36 Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet -- Original message--From:

Re: Stus-List Boom vanging...

Garhauer. Call and they will walk through sizing, etc.Bill Walker Sent from my LG G Pad F™ 8.0, an AT 4G LTE tablet -- Original message--From: Chuck Saur via CnC-List Date: Thu, Jan 28, 2016 12:48 PMTo: cnc-list@cnc-list.com;Cc: Chuck Saur;Subject:Stus-List Boom vanging...

Stus-List Phrf CnC 36

Lake Michigan (lmphrf) for my 36 is 129 distance handicap, 141 non-spinnaker. At least last year. Most phrf regions have a website where you can search by boat. Bill Walker Evening Star Pentwater Mi Sent from my HTC ___ Email address:

Re: Stus-List compass repair

FWIW, I fixed the large bubble in my Ritchie compass this week. Bellows and everything looked fine, so on a -6 degree morning after leaving it in garage overnight with the fluid, refilled per instructions on the internet, and it has held for a week. Looks like bubble gone. Hopefully for the

Re: Stus-List (no subject)

Ouch. Made some for a buddy this past fall. Teak cost $126. Took me about 4 hours. Pictures if you email me direct. I could walk you through it. Not difficult with table saw, router or shaper table, spindle Sanders or drum on a drill, hole saw jig or band saw. Bill Walker

Re: Stus-List Navtec pump service

I can second the recommendation that you check a farm implement shop. Quick, easy cheap. Bill Walker CnC 36 Pentwater. Mi Sent from my HTC - Reply message - From: Charles Nelson via CnC-List cnc-list@cnc-list.com To: Tracy Hirsh tracyh1...@gmail.com, cnc-list@cnc-list.com

Re: Stus-List Broken Goose neck

Ditto on Garhauer making mine out of stainless. Bill Walker 36 Sent from my HTC - Reply message - From: John Russo via CnC-List cnc-list@cnc-list.com To: 'Richard N. Bush' bushma...@aol.com, cnc-list@cnc-list.com Subject: Stus-List Broken Goose neck Date: Sun, Jan 11, 2015 11:54 AM

Stus-List KVH WIND

I may have posted before, but still looking for KVH wind instrument, ESPECIALLY analog wind direction. Any working used instrument or shop that works on these would be appreciated before I bite the bullet and go for new. Bill Walker CnC 36 Evening Star Sent from my HTC

Re: Stus-List Older style Autohelm wheel pilot popping out of gear

Kevin, The guts of wheel pilot not complicated. Remove from wheel and pop the two halves apart. You will see the the lever/cam which engages is held in place by very small Pins which can sheer off and allow cam to move freely independent of lever. I suspect this is the problem. You will

Re: Stus-List post

Home improvement stores sell the screw caps. White and off white. Bill Walker. Sent from my HTC - Reply message - From: Howard and Skippy via CnC-List cnc-list@cnc-list.com To: cnc-list@cnc-list.com Subject: Stus-List post Date: Thu, Nov 6, 2014 6:18 PM Does anyone have a lead on

Re: Stus-List Garhauer

Another positive experience from Garhauer Marine. Sent my main sheet traveller to them after lost some ball bearings, don't ask; they replaced all in traveller, replaced all in the blocks too, no labor charge, just cost of bearings and shipping. This is on a 1999 traveller car. Very happy.

Re: Stus-List EasyBlock Mainsheet Traveler

Does anyone have source for replacement lens for our teardrop running lights, circa 1981? Orin alternative, experience with replacements(led) I see on internet? Bill Walker Evening Star CnC 36 Sent from my HTC ___ This List is provided by the CC

Re: Stus-List Overpriced?

I hope he gets it!!! But I doubt it. Bill Walker Sent from my HTC - Reply message - From: Robert Abbott via CnC-List cnc-list@cnc-list.com To: cnc-list@cnc-list.com Subject: Stus-List Overpriced? Date: Sat, Oct 25, 2014 1:11 PM While I think this appears to be a nicely equipped and

Re: Stus-List Interior Floor Varnish

Did new floor boards for my 36 last winter. West epoxy then 8 coats minwax helmsman. I have used many, and this is as good as any. I used gloss, not slippery if you are wearing shoes. Bill Walke Sent from my HTC - Reply message - From: Edd Schillay via CnC-List

Re: Stus-List Racing rules question

I believe you could have protested both boats. Rule 60.1 allows a right to protest if your boat is involved in or saw the incident. Assuming that you hailed but didn't go up to avoid a collision, and middle boat did likewise, I think a committee would find against third boat and exonerate the

Re: Stus-List Online Captains License or class room?

Transportation workers identification card Sent from my HTC - Reply message - From: Gary Russell via CnC-List cnc-list@cnc-list.com To: Jack Fitzgerald j...@fitzgeraldforwarding.com, CC List cnc-list@cnc-list.com Subject: Stus-List Online Captains License or class room? Date: Fri, Oct

Re: Stus-List Slacking the Baby Stay

Just a thought, and I 're- made my floor boards this winter,is to make a slit all the way the the edge so you can remove without taking it out. On my boat it is pretty close to edge. I could send you photo. Why? What if you need to get to that area quickly? Bill Walker CnC 36 Evening Star

Re: Stus-List blown alternator diode

The thread on alternators got me to ask myself, how do you known if you have an internal diode on alternator, and how do you know if blown? I am, electrically challenged, admittedly. Bill Walker CnC 36 Sent from my HTC ___ This List is provided by

Re: Stus-List Alcohol stove

Do not use stove cooking fuel if you mean Coleman fuel. That is gasoline. I know someone who is very lucky. Thought Coleman fuel same as alcohol. Oops. Bill Walker. Sent from my HTC - Reply message - From: Marek Dziedzic via CnC-List cnc-list@cnc-list.com To: Burt Stratton

Re: Stus-List Tiller

I have made many bent shaft canoe paddles. From what you are describing sounds very doable. Can you send picture off list. Bill Walker CnV 36 Evening Star Pentwater, Mi Sent from my HTC - Reply message - From: Brent Driedger via CnC-List cnc-list@cnc-list.com To: Bill Bina - gmail

Re: Stus-List Aluminum coating

I spray painted my pedestal with rustoleum satin black two years ago and it still looks great. Fresh water boat in the great lakes though, might make a difference. Bill Walker CnC 36 Evening Star -Original Message- From: Brad Crawford via CnC-List cnc-list@cnc-list.com To: Jake

Re: Stus-List Jib sheet bowlines hang up on baby stay

Dennis, think a single soft shackle would work? Bill Walker. Sent from my HTC - Reply message - From: Dennis C. via CnC-List cnc-list@cnc-list.com To: Kevin Driscoll kevindrisc...@gmail.com, CnClist cnc-list@cnc-list.com Subject: Stus-List Jib sheet bowlines hang up on baby stay

Re: Stus-List Jib sheet bowlines hang up on baby stay

Dennis, Do you have source of soft shackles? See West carries small ones. How exactly do you connect to clew? Is it just the knot on the shackle that goes through the shackle loop? Bill Walker CnC 36 Pentwater, Mi. -Original Message- From: Dennis C. via CnC-List

Re: Stus-List List water pump repair

Anyone know how to troubleshoot PAR diaphragm pump that pumps great but will not shut off when reaches pressure. Just keeps on grinding. There is NO air in system. with faucets open pumps great, great pressure, but when shut faucets it won't reach pressure and stop. Is there a setting

Stus-List Halyard

I must replace my main halyard due to improper winter storage, I guess by me, and significant chafing. Interested in recommendations for type and vendor. Do use UK Kevlar tape drive main for racing. Bill Walker C n C 36 Sent from my HTC ___ This

Stus-List Batteries

Can someone with knowledge explain difference between group 27 and 31 batteries. Will 31s fit in same box as 27s? Thanks. Need to replace house this year. Bill Walker C n C 36 Sent from my HTC ___ This List is provided by the CC Photo Album

Re: Stus-List Batteries

Thanks to all on battery info. Helps Bill Walker. Sent from my HTC - Reply message - From: wwadjo...@aol.com via CnC-List cnc-list@cnc-list.com To: cnc-list@cnc-list.com cnc-list@cnc-list.com Subject: Stus-ListBatteries Date: Thu, May 1, 2014 5:28 PM Can someone with knowledge

Re: Stus-List ABYC compliance issue.

Here is link to Fire Port. Bill Walker CnC 36 Pentwater, Mi. http://www.marineeast.com/a_sch/sch_det.asp?cid=13pid=13_01 -Original Message- From: Glen Eddie ged...@torkinmanes.com To: cnc-list cnc-list@cnc-list.com Sent: Thu, Apr 17, 2014 11:00 am Subject: Stus-List ABYC compliance

Re: Stus-List floor board fasteners

Thanks all for replies. I'll let you know how it turns out. -Original Message- From: Dennis C. capt...@gmail.com To: cnc-list cnc-list@cnc-list.com Sent: Wed, Mar 26, 2014 4:27 pm Subject: Re: Stus-List floor board fasteners Gets my vote. Dennis C. Sent from my iPhone On Mar

Re: Stus-List Impeller/gear puller

Dave, Don't over think this, really. Get some needle nose pliers (ones with curved nose great) and a small phillips screwdiver. Put the screwdiver on the center drive shaft and apply enough inward pressure to counteract your pulling on the impeller. You should have no problem. Bill

Re: Stus-List Autohelm St4000 how it should work with the GPS

I almost shudder at posting in this thread, but . . . . . . One other point, read the manual, and set the gain on the auto pilot. You will never get optimum performance, read: a straight course, without doing this step in the set up, AND every time that power is completely removed from the

Re: Stus-List Crack where keel meets hull

Peter, Probably not a big deal. I suggest when boat is in the slings ready to launch you have a burly yard guy pull/push the bottom of keel while you watch the crack closely. If there is any give in it, that is you can see crack expand/contract, you need to do something before launch. If

Re: Stus-List 30 MKI weather helm - marking wheel, etc.

Good tip. How do you determine 2 and 4 degrees? Simple trick? Bill Walker Evening Star CnC 36 -Original Message- From: Dennis C. capt...@yahoo.com To: cnc-list cnc-list@cnc-list.com Sent: Fri, Nov 22, 2013 9:06 am Subject: Re: Stus-List 30 MKI weather helm - marking wheel, etc. Good

Re: Stus-List Go Pro Camera

Gentlemen, Anyone use a Go Pro camera? Or others? To record sailing experience for the long winter nights. Model and pros and cons would be great. Wife wants to buy for Christmas but I am not sure. Bill Walker CnC 36 Evening Star Pentwater, Michigan 49449

Re: Stus-List Edson steering issue

On my 1981 CnC 36 the steering gets stiff when boat is heeled and travelling to the wind. Before launch, there was no play when manually tugged it to and fro, side to side, front to back. Noticed end of last season. I have never lubricated in three years I have own boat The bushing looked

Re: Stus-List rust removal

Thanks all. I'll try a product with oxalic acid as ingredient as it seems to be common in these various products. Bill In a message dated 12/10/2012 9:55:37 A.M. Eastern Standard Time, rickbr...@earthlink.net writes: Mary Kate “On and Off”. Or maybe its “On ‘n Off”. Anyway, it will

Re: Stus-List Hot water heaters

Check out PrecisionTemp.com. They make a model for marine use. I have one. No insurance issues. Bill Walker CnC 36 Pentwater, Mi. In a message dated 10/24/2012 7:53:08 P.M. Eastern Daylight Time, cnclistforw...@hotmail.com writes: Check your insurance policy before you do that...