half Of Rjcasciato
via CnC-List
Sent: Friday, April 08, 2016 5:33 PM
To: cnc-list@cnc-list.com
Cc: Rjcasciato
Subject: Re: Stus-List Boom fittings for reefing attachments
Josh:
If what you're trying to do is use one line to reef both the tack and clew of
the Main..that's a lot o
: Rjcasciato via CnC-List
Sender: "CnC-List"
Date: Sat, 9 Apr 2016 18:06:53
To:
Reply-To: cnc-list@cnc-list.com
Cc: Rjcasciato
Subject: Re: Stus-List Boom fittings for reefing attachments
HI Mike:
You or your sailmaker can fabricate one..in my case, I bought a
piece of 1&q
om...@bell.blackberry.net
Subject: Re: Stus-List Boom fittings for reefing attachments
Hi Ron,
You refer to a "strap loop" that goes through the tack cringle. I think
this is exactly what i'm missing! Where do I get one of these? Or how do I
make one?
For the past two years i'
: mcrom...@bell.blackberry.net
Subject: Re: Stus-List Boom fittings for reefing attachments
Hi Ron,
You refer to a "strap loop" that goes through the tack cringle. I think
this is exactly what i'm missing! Where do I get one of these? Or how do I
make one?
For the past two years
When I had my mainsail made I had the sail maker include the dogbones
(strops) in both reef cringles and I had him add a web nylon handle above
the cringles so that you can pull the sail and control its movement while
setting the dogbone. I have considered making my dogbones longer by
removing the
You could also use your Cunningham. You have one?
On Fri, Apr 8, 2016, 6:47 PM Michael Crombie via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hi Ron,
>
> You refer to a "strap loop" that goes through the tack cringle. I think
> this is exactly what i'm missing! Where do I get one of these? Or h
Hi Ron,
You refer to a "strap loop" that goes through the tack cringle. I think this
is exactly what i'm missing! Where do I get one of these? Or how do I make one?
For the past two years i've just been trying to hook the cringle onto the
reefing hook on the boom...this doesn't work very wel
m2813e6d2b6:g:-TwAAOSwwpdW5YT9&vxp=mtr
>
>
>
>
> Best,
>
>
>
> Ron Casciato
>
>
>
>
>
>
> --
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Josh
> Muckley via CnC-List
> *Sent:* Friday, Ap
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh
Muckley via CnC-List
Sent: Friday, April 08, 2016 2:24 PM
To: C&C List
Cc: Josh Muckley
Subject: Re: Stus-List Boom fittings for reefing attachments
Awesome guys! Thanks everyone for the input. It looks
f you have a
> gooseneck reefing hook.
>
> Marek
>
> From: Josh Muckley via CnC-List <mailto:cnc-list@cnc-list.com>
> Sent: Friday, April 8, 2016 14:24
> To: C&C List <mailto:cnc-list@cnc-list.com>
> Cc: Josh Muckley <mailto:muckl...@gmail.com>
> Subj
via CnC-List
Sent: Friday, April 8, 2016 14:24
To: C&C List
Cc: Josh Muckley
Subject: Re: Stus-List Boom fittings for reefing attachments
Awesome guys! Thanks everyone for the input. It looks like "that's just the way
it is". Nobody in the industry has necessarily come up
gt;
>> Best regards,
>>
>> Martin
>> Calypso
>> 1971 C&C 43
>> Seattle
>>
>> -Original Message-
>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robbie
>> Epstein via CnC-List
>> Sent: Friday, A
s,
>
> Martin
> Calypso
> 1971 C&C 43
> Seattle
>
> -Original Message-
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robbie
> Epstein via CnC-List
> Sent: Friday, April 08, 2016 7:48 AM
> To: cnc-list@cnc-list.com
> Cc: Robbie E
t@cnc-list.com
Cc: Robbie Epstein
Subject: Re: Stus-List Boom fittings for reefing attachments
My 40 has a 1 1/4 inch, t track mounted on the side of the boom with a Schaefer
Jiffy reef slide/bail that slides up and down the track so you can position the
clew attachment point for multiple mainsail
Our reef lines starts at the slides on the T track, go through the grommets
at the reef points on the mainsail, and then run to the back of the boom
where they goes over the sheaves and disappears inside the boom to reappear
at the mast and so on to the cabin-top rope clutches and winches.
The giv
Agree. Boom to cringle back to boom for the 2:1.
Here's Touche's reef block and track. The boom has eye straps on the other
side corresponding to the sail's reef points. They are located so the reef
line pulls down and aft. The block gets moved accordingly.
https://drive.google.com/open?id=0B
I don't like tieing the reef line at the reef point. It pulls the sail to
that side and places a lot of stress on the grommet. I'd use either a reef
hoof or a dog-bone so you are pulling down, not sideways. Also, if you
attach the line to the boom you are getting a 2:1 purchase.
Joel
35/3
Annap
Josh, Our mast and boom were built by Offshore Spars. Our boom has a track
bolted to the starboard side with pin stop slides we use for the reefing
points.
You can see it in this photo (assuming the link works):
https://goo.gl/photos/PbbNaZG4WaXGQEHL8
Ken H.
On 8 April 2016 at 13:00, Josh Muck
Yeah Len,
I have the 3 sheaves at the aft end of the boom. In fact I just had them
all remade by zepherworks. The middle one is for the outhaul. First reef
is on the stbd and second reef is on the port. If you only tie it in the
reef hole and not the boom (through the reef hole) then the clew
: cnc-list@cnc-list.com
Cc: Michael Brown
Subject: Re: Stus-List Boom fittings for reefing attachments
At a recent LOOR night Geoff Moore from North Sails spoke about sails and trim
for the "offshore" races. His recommendation was to have the reefing line tied
around the boom.
Mic
, NS
In the water since Monday!
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh
Muckley via CnC-List
Sent: Friday, April 08, 2016 5:46 AM
To: C&C List
Cc: Josh Muckley
Subject: Re: Stus-List Boom fittings for reefing attachments
Yeah Paul, I had considered doing that.
Josh, My 1989 37+ has two ropes that go through the boom and to the coach roof
led aft to the winches and a rams horn hook on the front of the boom. The two
ropes go to each reef point on the leech and I use a line stopper knot (figure
of eight) to secure. I let off halyard tension, hook the Ram
At a recent LOOR night Geoff Moore from North Sails spoke about sails and trim
for the "offshore" races. His recommendation was to have the reefing line tied
around the boom.
Michael Brown
Windburn
C&C 30-1
Josh
The 2007 C&C115 that we race and the 2008 C&C99 that I sail on both are just
ti
flat.
>
> Gary
>
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh
> Muckley via CnC-List
> Sent: Thursday, April 7, 2016 11:18 PM
> To: C&C List
> Cc: Josh Muckley
> Subject: Stus-List Boom fittings for reefing attachments
>
&
ject: Stus-List Boom fittings for reefing attachments
Ok guys (& gals),
I just had my boom repainted and as a result this has been a great time to
rebuild and replace all the associated pieces and parts. The boom wasn't made
with any place to attach reefing lines. Previously I ha
on the Frers boom is not from the reef
line.
Mike
Persistence
1987 Frers 33
Halifax, NS
In the water since Monday!
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley
via CnC-List
Sent: Friday, April 08, 2016 5:46 AM
To: C&C List
Cc: Josh Muckley
Subject: Re: Stus-Li
pr 2016 23:17:44 -0400
> To: cnc-list@cnc-list.com
> Subject: Stus-List Boom fittings for reefing attachments
> From: cnc-list@cnc-list.com
> CC: muckl...@gmail.com
>
> Ok guys (& gals),
>
> I just had my boom repainted and as a result this has been a great time to
> rebuild
You could perhaps find an eye nut that would fit onto a stopper that you
pictured instead of the knurled nut.
Cheers,
Paul.
Date: Thu, 7 Apr 2016 23:17:44 -0400
To: cnc-list@cnc-list.com
Subject: Stus-List Boom fittings for reefing attachments
From: cnc-list@cnc-list.com
CC: muckl...@gmail.com
Ok guys (& gals),
I just had my boom repainted and as a result this has been a great time to
rebuild and replace all the associated pieces and parts. The boom wasn't
made with any place to attach reefing lines. Previously I had simply tied
them with a bowline on a bite around the boom. It works
29 matches
Mail list logo