Overall very nicely done!
Just a few minor nits.
There seems to be a error in the config file in pcmcia at line 1936 ( or
at least on my machine.. )
card Xircom Cardbus Ethernet 10/100
pci 0x115d 0x0003
bind tulip_cb
cardmgr seems to complain about this on my machine. ( ThinkPad A22p
On Friday 07 September 2001 8:27 pm, you wrote:
Amazing isn't it ?
As I use cooker, I will dl the latest beta and test it to see if I have the
same problem.
Lucky you. Could not find any vendor selling Mandrake betas, and since
downloading one CD takes about 4 days on-and-off, I will have to
--- David Walluck [EMAIL PROTECTED] wrote:
For me, it's usually just for workstation use, but I'm glad to see
journaling as I have had ext2 crash so many times and have lost so much
data that I'm glad if we can finally put an end to all of that.
I guess you mean **you** have crashed your
Thanks for your hint. If I don't use devfs I don't have this
behaviour, my
CD-R is always available.
{ Also, you can possibly find valuable information in the logs
{ (/var/log/syslog, /var/log/messages, etc).
Looking at the logs and looking the output of lsmod, I see that the
--- Sergio Korlowsky [EMAIL PROTECTED] wrote:
I have almost all patitions running on ext3 with the exeption of /boot and
/home... how can I convert to ext3 those remaining partitions without
re-formating... I have all my personal stuff in /home. ;-)
sk
boot in single user
unmount /boot and
--- Brian J. Murrell [EMAIL PROTECTED] wrote:
Until ext3 is stable
Is stable? I have been using it for a year now with little to no
problems.
Apparently he does not know or think rpmfind.net is test enought.
then they are guilty of these same
politics.
Give it a rest.
You
On Fri, 7 Sep 2001, Ben Reser wrote:
On Thu, Aug 30, 2001 at 07:50:52PM +0800, Ian C. Sison wrote:
Yes iptables works, but if you go via the /etc/sysconfig/iptables and
start it using the initscript of iptables, it will bomb out with a
segfault. iptables-restore has some bug, however if
It was recently released and claims to fix all (known :-) read bugs on
NTFS. Sounds promising.
-andrej
It was also an old problem witch has been corrected since ...
- Original Message -
From: Fabrice FACORAT [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, September 08, 2001 3:27 AM
Subject: Re: [Cooker] Nvidia Drivers
Le Samedi 8 Septembre 2001 03:14, Joal Heagney scribit :
I
Hi
When asked to choose resolution, the window shows 1280x1024 16 bit. If I ask
for 24 bit then I get it changed to 1024x786.
If I press the button for 'show all' when still in 24 bit, I get 1280x1024.
Weird logic.
regards
guran
--- SI Reasoning [EMAIL PROTECTED] wrote:
I have had all kinds of problems since I tried ext3.
Linux completely locks up within a few minutes of
running. I have even changed fstab back to ext2 but I
still have the problem. I have no clue as to what
causes it and it crashes too fast for me to
When updating to the latest initscripts I removed /lib/dev-state (to
clan up entries). After reboot:
[root@cooker root]# ll /dev/snd
ls: /dev/snd: No such file or directory
[root@cooker root]# ll /lib/dev-state/snd
total 0
crw-rw1 root audio116, 0 Sep 8 14:24 controlC0
Le Vendredi 7 Septembre 2001 22:21, Nathan A. Smith scribit :
(II) LoadModule: nv
you don't use the nvidia drivers even if before you had :
(II) LoadModule: glx
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor=NVIDIA Corporation
compiled for 4.0.2,
On Saturday 08 September 2001 5:42 pm, you wrote:
François is the modeline master. I let him add it (or not accept it).
Thanks :)
Michel
[...]
Then I think I know what happens. When ide-scsi is unloaded, device
nodes are destroyed. They should be recreated on acess, but are not.
It
means, that cdrecord is using some device nodes that are not listed
in
/dev/modules.devfs
Could you please remove ide-scsi and then
O.K. I understand you had enough to do with XFS etc, but still - i815
should have fair user base and releasing 8.1 with broken lm-sensors for
this chip is not nice. An it is fixed in 2.6.1
TIA
-andrej
Anyway, I upload the SRPM at http://atlantid.org/rpms just in case
you're interested to see for yourself. Note that you will need to
install libraw1394 at the same location (the one in contribs will not
work). Those packages are safe regarding what is installed and
uninstalled, I've
Hello all!
file:
file:/usr/share/doc/HOWTO/HTML/en/index.html
consists 3 lines Unicode Howto, in fact, the first link is to
file:/usr/share/doc/HOWTO/HTML/en/Unicode-HOWTO.html
the second one link to:
file:/usr/share/doc/HOWTO/HTML/en/Unix-and-Internet-Fundamentals-HOWTO.html
and the last:
On za, 2001-09-08 at 14:36, Michal Bukovjan wrote:
I think you can safely add Zope again, latest Zope 2.4.1 requires Python
2.1.x, which is in Cooker now.
There should be no problems,
Michal
Alexander Skwar wrote:
So sprach »Mark Roach« am 2001-09-07 um 12:43:12 -0500 :
I see from
Hello,
I wanted to know why Cannon Smash (csmash) was not in contribs (after
all, it's a big game). When I launch it in runlevel 3, I see the
launcher, I simply click Start game (so not fullscreen related bug),
and it segfaults instantly. Am I the only one with this error?
Grégoire
On Saturday 08 September 2001 14:23, Guillaume Cottenceau wrote:
apparently linked to the tulip driver being in one initrd but not the
other... very strange.
could you retry booting with a 2.2 kernel (install kernel22 package) ?
you can also try to unplug the network card temporarily...
Hi
Proftpd 1.2.2 release and rc2 packages all have this bug on my 8.0 server:
downloaded files 1mb in size are corrupted.
I downloaded 1417694b tar.gz file 3 times over modem connection and got 100%
file corruption. Tested with many ftp clients as well.
All packages were rebuilt from src
if loading the driver for a card ie aha-152x fails you are asked if you
want to try again with other parameters. If you say yes then you just
get a list of all the drivers again.
What happened to manually being able to enter the parameters? With the
aha-152x you need to be able to do this.
On Sat, 8 Sep 2001, Pixel wrote:
{ it uses /dev/sg0 /dev/sg1 ... and should work flawlessly.
{ the pb is that scsi_hostadapter is not probed again. adding:
{
{ probeall scsi-hosts scsi_hostadapter
{
{ in /etc/modules.conf fixes it (since scsi-hosts is modprobe'd in
{ modules.devfs). I'm adding
With the latest mdk-eazel-engine I got today from cooker, the bug is
still there.
Some gnome applets (gweather, licq-gtk) are completely distorted with
black and white lines after about 30 minutes of using the system.
So it seems you didn't change anything to it after all the bug
reports...
If
Guillaume Cottenceau wrote:
Grégoire Colbert [EMAIL PROTECTED] writes:
Hello,
I wanted to know why Cannon Smash (csmash) was not in contribs (after
all, it's a big game). When I launch it in runlevel 3, I see the
what is the meaning of big ?
there are 330 bigger packages.
Someone
Grégoire Colbert wrote:
open(/dev/nvidiactl, O_RDWR) = -1 EACCES (Permission denied)
--- SIGSEGV (Segmentation fault) ---
+++ killed by SIGSEGV +++
Seems quite understandable. Will try as root.
Nice game.
Grégoire
hey,
1) The installation hangs after installing the
bootloader during regular installation, i think this is because the next step is
X configuration. I have a Diamond stealth 2000 s3 virge 4mb chipset. Beta 1
installed fine, however, beta 2 and 3 hang right after installing the bootloader
Why do you have gtm in cooker, but not Downloader for X (nt) ?
(nt is in contribs).
Nt is the only linux download manager which is able to compete with
windows programs like Getright and such...
NT supports *ftp search*, dividing a file in multiple files for faster
downloads, ftp and http
Hi!
Why do the bind-utils now depend on bind? Is this intentional?
--
Michael Reinsch [EMAIL PROTECTED] http://mr.uue.org
On sam, 2001-09-08 at 18:19, Guillaume Cottenceau wrote:
Charlie [EMAIL PROTECTED] writes:
Why do you have gtm in cooker, but not Downloader for X (nt) ?
(nt is in contribs).
Nt is the only linux download manager which is able to compete with
windows programs like Getright and
oops!
here are the error messages before it crashed:
kernel hda: drive-cmd: status=0x51 {Drive Ready
SeekComplete Error}
kernel: drive-cmd: error=0x04 {DriveStatus Error}
It is also possible the draknet or netdrake or
whatever it is called that I ran from mcc may have
caused a problem. When I
Charlie wrote:
With the latest mdk-eazel-engine I got today from cooker
How do you activate eazel-engine? I asked here but got no reponse.
TIA
-andrej
Done new install today and noticed this selection. O.K. I understand
what Russian/KOI8-R and Russian/CP1251 are. But what exactly does this?
Does it mean that all text has to be in UTF-8? Pretty tough ... just how
many porgrams can really cope with it? I can name mt favourite, zsh,
that
Clean install and problems with DNS. It turned out, somebody got clever
idea to put timeout:1 in resolv.conf by default. Now, may be you all
have Gigabit Ethernet, but there are poor guys with modem connection
(*not* even V.90, I do not mention V.92) and for them it is pretty low.
Just how
Hello,
In todays latest cooker I have two problems with ide scsi drives.
First - can't mount the drive.. KDE says special device does not exist
for /dev/scd0. On doing a little digging, /dev/scd0 is now a link to
/dev/host0/bus0/target0/lun0/cd, In that dirctory there is
Oh, forgot to mention --
In the boot stuff after it sees the pcmcia card ide controller message
says cannot stat /dev/scd0
V.
On Saturday 08 September 2001 04:04, you wrote:
--- Sergio Korlowsky [EMAIL PROTECTED] wrote:
I have almost all patitions running on ext3 with the exeption of /boot
and /home... how can I convert to ext3 those remaining partitions without
re-formating... I have all my personal stuff in
On Saturday 08 September 2001 12:30, you wrote:
You can limit the number of CDs you want with the -c (--cd) option
to the -a (--auto) mode:
/cooker/misc/mkcd2 -a --cd 2 /cooker/
Great... so you don't need to create all 4 cds.
I installed beta 3 last night, Nice ... clean and smooth installation.
It detected everything ok, all I got in warnings was an OLD message when
configuring the NICs something related to the tulip.so driver.
I was having problems with dns2go segfaulting, well it works now!
But... I am having
Pixel wrote:
Borsenkow Andrej [EMAIL PROTECTED] writes:
Clean install and problems with DNS. It turned out, somebody got clever idea
to put timeout:1 in resolv.conf by default. Now, may be you all have Gigabit
Ethernet, but there are poor guys with modem connection (*not* even V.90, I do
not
Vincent Meyer wrote:
Hello,
In todays latest cooker I have two problems with ide scsi drives.
First - can't mount the drive.. KDE says special device does not
exist for /dev/scd0. On doing a little digging, /dev/scd0 is now a
link to /dev/host0/bus0/target0/lun0/cd, In that
[EMAIL PROTECTED] (andre) writes:
[root@node1583e andre]# ls -l .gnome_private/panel.d/default
ls: .gnome_private/panel.d/default: Permission denied
usually reiserfsck helps getting that fixed
--
Warly
I have had all kinds of problems since I tried ext3.
Linux completely locks up within a few minutes of
running. I have even changed fstab back to ext2 but I
still have the problem. I have no clue as to what
causes it and it crashes too fast for me to research
it. g
--- Eugenio Diaz
Greg Sarsons [EMAIL PROTECTED] writes:
[...]
root@leia:~ddcxinfos | grep EISA
17.01 inches monitor (truly 15.75') EISA ID=MEI2c03
19.73 inches monitor (truly 18.27') EISA ID=STC032b
ok, i just added it.
never used ddcxinfos before it doesn't matter what resultion you
are
On Saturday 08 September 2001 5:07 pm, you wrote:
ok, i just added it.
never used ddcxinfos before it doesn't matter what resultion you
are running does it? If it does I was running 1600x1200
no it doesn't.
Forwarding my previous message - I have tried ddcxinfos but unfortunately
Ladislav Bodnar [EMAIL PROTECTED] writes:
[...]
Simplified Chinese - Beijing or Shanghai
Traditional Chinese - Taipei
Small thing, I know. But I don't think this is very difficult to fix.
i put:
'Chinese Traditional (Taiwan)' = 'Asia/Taipei',
'Chinese Simplified (China)' =
Michel Alexandre Salim [EMAIL PROTECTED] writes:
On Saturday 08 September 2001 5:07 pm, you wrote:
ok, i just added it.
never used ddcxinfos before it doesn't matter what resultion you
are running does it? If it does I was running 1600x1200
no it doesn't.
Forwarding my
Borsenkow Andrej [EMAIL PROTECTED] writes:
[...]
Then I think I know what happens. When ide-scsi is unloaded, device
nodes are destroyed. They should be recreated on acess, but are not. It
means, that cdrecord is using some device nodes that are not listed in
/dev/modules.devfs
Could you
Borsenkow Andrej [EMAIL PROTECTED] writes:
Ah! I wondered what scsi-hosts in modules.devfsd is supposed to refer
to.
You mean
probeall scsi-hosts scsi-hostadapter scsi-hostadapeter1 ...
of course? Is kudzu aware about it (when I plug additional hostadapter
after installation).
guran [EMAIL PROTECTED] writes:
Hi
VERSION (rsync ftp.sunet.se)
/ChangeLog/1.569/Fri Sep 7 15:14:05 2001//
Mandrake Linux Cooker-i586 20010907 22:32
Very smooth installation.
Still a difference between bootdisk and from harddisk when booting, i.e.
kudzu failed. This is from
Randy Welch [EMAIL PROTECTED] writes:
[...]
(Keeping my fingers crossed that we don't see a repeat of the 8.0 beta -
RC1 changes that broke thinkpads... :-)
kernel stuff should be much more conservative for 8.1 (e.g. we stay with
2.4.8), so the probability for this scenario is lower.
--
Borsenkow Andrej wrote:
Anyway, I upload the SRPM at http://atlantid.org/rpms just in case
you're interested to see for yourself. Note that you will need to
install libraw1394 at the same location (the one in contribs will not
work). Those packages are safe regarding what is installed and
On za, 2001-09-08 at 15:12, Grégoire Colbert wrote:
Hello,
I wanted to know why Cannon Smash (csmash) was not in contribs (after
all, it's a big game). When I launch it in runlevel 3, I see the
launcher, I simply click Start game (so not fullscreen related bug),
and it segfaults
Grégoire Colbert [EMAIL PROTECTED] writes:
Hello,
I wanted to know why Cannon Smash (csmash) was not in contribs (after
all, it's a big game). When I launch it in runlevel 3, I see the
what is the meaning of big ?
there are 330 bigger packages.
[gc@obiwan ~] ls -rlS /RPMS | perl -ne
What is up with the bug reporting. Beta 3 is out for 8.1 but you can
only enter bug reports for beta 2.
Ural Khassanov [EMAIL PROTECTED] writes:
Hi
Proftpd 1.2.2 release and rc2 packages all have this bug on my 8.0 server:
downloaded files 1mb in size are corrupted.
I downloaded 1417694b tar.gz file 3 times over modem connection and got 100%
file corruption. Tested with many ftp clients
Grégoire Colbert [EMAIL PROTECTED] writes:
Guillaume Cottenceau wrote:
Grégoire Colbert [EMAIL PROTECTED] writes:
Hello,
I wanted to know why Cannon Smash (csmash) was not in contribs (after
all, it's a big game). When I launch it in runlevel 3, I see the
what is the meaning of
Charlie [EMAIL PROTECTED] writes:
Why do you have gtm in cooker, but not Downloader for X (nt) ?
(nt is in contribs).
Nt is the only linux download manager which is able to compete with
windows programs like Getright and such...
Nt is not a very linux-friendly name :-)).
NT supports
Grégoire Colbert [EMAIL PROTECTED] writes:
Grégoire Colbert wrote:
open(/dev/nvidiactl, O_RDWR) = -1 EACCES (Permission denied)
--- SIGSEGV (Segmentation fault) ---
+++ killed by SIGSEGV +++
Seems quite understandable. Will try as root.
Nice game.
nvidia sucks ?
--
Michael Reinsch [EMAIL PROTECTED] writes:
Hi!
Why do the bind-utils now depend on bind? Is this intentional?
no. bugreport has been sent.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
It is possible it is initscripts-6.27-2 since I
updated that file at the same time.
Another possible clue is that when reading the logs
this message appeared right before one of the crashs
(how far before I am uncertain, also I could not go
through the logs for very long before it crashed again
This is weird. The startup stuff says it's looking for IP for eth0,
then says No net device found AFTER it initialized the card. Works
ok, but message doesn't make sense. (This is on a pcmcia network card)
V.
You can limit the number of CDs you want with the -c (--cd) option
to the -a (--auto) mode:
/cooker/misc/mkcd2 -a --cd 2 /cooker/
--
Warly
Borsenkow Andrej [EMAIL PROTECTED] writes:
Clean install and problems with DNS. It turned out, somebody got clever idea
to put timeout:1 in resolv.conf by default. Now, may be you all have Gigabit
Ethernet, but there are poor guys with modem connection (*not* even V.90, I do
not mention
On Sat, Sep 08, 2001 at 05:15:01PM +0800, Ian C. Sison wrote:
It _is_ a bug in that it should not segfault when given a wrong input
stream. If the format of the file changed radically from ipchains-save,
then this situation should be handled gracefully, and not with a segfault.
Segfaults
On Mon, 3 Sep 2001, Pixel wrote:
Thanks a lot. I have reported problem about building glibc or
links with gawk 3.1.0 (infinitely large files are generated during
building process),
i've just tested, and had no pb
Thanks, it's personal problem. My environment seems to be serious
Borsenkow Andrej [EMAIL PROTECTED] writes:
Pixel wrote:
Borsenkow Andrej [EMAIL PROTECTED] writes:
Clean install and problems with DNS. It turned out, somebody got clever idea
to put timeout:1 in resolv.conf by default. Now, may be you all have Gigabit
Ethernet, but there are poor guys
I think you can safely add Zope again, latest Zope 2.4.1 requires Python
2.1.x, which is in Cooker now.
There should be no problems,
Michal
Alexander Skwar wrote:
So sprach »Mark Roach« am 2001-09-07 um 12:43:12 -0500 :
I see from rpmfind that Zope was included in Mandrake at one point...
Sergio P.Korlowsky [EMAIL PROTECTED] writes:
[...]
But... I am having a problem to run quake3 or q3demo either one.
First I thought it was a problems related to the GLide drivers... Nop
I was wrong... it IS related to sound!
To isolate, you can try to mv (or chmod for devfs probably) the
I thought, I try it with new mkinitrd and new way how it handles devfs
(Chmouel, what is this magic handledevfs in nash? What it does - or,
better, how?) I had LVM volume so I formatted it (as Reiser), installed
minimal number of packages, setup lilo to boot off main cooker but with
root on
Borsenkow Andrej wrote:
Vincent Meyer wrote:
With the link in place, now i can try to mount and it says no
media rather than the above message. Haven't tried it after
rebooting yet.
Confirmed. Same here.
Eh ... I forgot to insert CD. You too? :-)
So, everything works for me
Hi
I had the same 'not found device' so I went to /etc/devfsd.conf and hashed
out the two last lines:
# Enable full compatibility mode for old device names. You may comment these
# out if you don't use the old device names. Make sure you know what you're
# doing!
REGISTER.*
PLease, please!
The problem of disappearing ide-scsi cdrom is totally diferent; see
another thread today (forgot subject and do not have it anymore). You
have to add
probeall svsi-hosts scsi_hostadapter scsi_hostapdapter1 ...
for all SCSU hostadapters to modules.conf. That will cause devfsd
Hi
Ural Khassanov wrote:
Proftpd 1.2.2 release and rc2 packages all have this bug on my 8.0 server:
downloaded files 1mb in size are corrupted.
I downloaded 1417694b tar.gz file 3 times over modem connection and got 100%
file corruption. Tested with many ftp clients as well.
All packages were
Pixel wrote:
in fact, the best solution is to use
probeall scsi_hostadapter scsi_hostadapter1 scsi_hostadapter2 ...
and to perl -pi -e 's/scsi-hosts/scsi_hostadapter/g' /etc/modules.devfs
that way, both devfs and non-devfs will work nicely.
How should it work with non-devfs? And I
I haven't found the C++ classes for Imagemagick in Cooker.
I tried to install ImageMagick-Magick++-5.3.7-1.i386.rpm myself.
rpm has a lot of unsolved dependencies, but the files are actually installed.
Is there a special package for Mandrake?
hey gc, on your people.mandrakesoft page you have no link for rpmmon or
anything related to it other than a tutorial in which i saw no place to
d/l or code to write...you were the first to announce it so i assume it
was your little project. pop it in the distro :).
@localhost$ google
Guillaume Cottenceau wrote:
I did not know what it does. Besides, I suspect that for LVM you can't
use device numbers, you have to use real names. Numbers are assigned
dynamically when volume group is configured; if we rely on vgscan it may
find another VG first, so minor number will be wrong.
The subject is the media.
regards
guran
--
Mandrake Linux 8.1 beta Cooker kernel-2.4.8.21 vers:1.569
Pixel wrote:
Borsenkow Andrej [EMAIL PROTECTED] writes:
Pixel wrote:
in fact, the best solution is to use
probeall scsi_hostadapter scsi_hostadapter1 scsi_hostadapter2 ...
and to perl -pi -e 's/scsi-hosts/scsi_hostadapter/g' /etc/modules.devfs
that way, both devfs and non-devfs will work
It's back...
So I go out, buy 2 nics and some cat5, run drakgw on this machine (that
i use now), everything seems okay. The other machine disagrees. It
says that no link found, check cable. cable is fine, this machine shows
nothing to indicate a problem of any kind, successfully pinged
On Saturday 08 September 2001 15:13, you wrote:
Sergio P.Korlowsky [EMAIL PROTECTED] writes:
[...]
But... I am having a problem to run quake3 or q3demo either one.
First I thought it was a problems related to the GLide drivers... Nop
I was wrong... it IS related to sound!
To
Hi!
On Sun, 09 Sep 2001 01:06:52 Charlie wrote:
On sam, 2001-09-08 at 19:07, Borsenkow Andrej wrote:
How do you activate eazel-engine? I asked here but got no reponse.
When you install mdk-eazel-engine (and I think mandrake-desktop should
be installed with it ?), it replaces the default gtk
Using the hd.img I get an rpmbuild error when trying an upgrade. I
reported this against Beta 2. I seem to remember this with 7.0 or 7.1.
It appears that at some point /tmp/hdimage gets umounted prematurely.
I uninstalled initscripts and re-installed the
previous one but to no avail. I am very frustrated
right now and a bit clueless. Since it takes so little
time before the whole system goes down and so long to
reboot because of fsck (even with ext3 the root
directory still gets fsck). I have
Sergio P.Korlowsky wrote:
On Saturday 08 September 2001 15:13, you wrote:
Sergio P.Korlowsky [EMAIL PROTECTED] writes:
[...]
But... I am having a problem to run quake3 or q3demo either one.
First I thought it was a problems related to the GLide drivers... Nop
I was wrong... it IS related
Hello,
There still is not a working pcmcia image that works with network cards.
The image dated 9/7/01 on ftp.sunet.se still says no net device found
V.
/* snip */
downloaded files 1mb in size are corrupted.
I downloaded 1417694b tar.gz file 3 times over modem connection and got 100%
file corruption. Tested with many ftp clients as well.
All packages were rebuilt from src without any errors.
rc1.3 from 8.0 distribution doesn't have
Well, my kids managed to mess up what's left of this Gateway Solo 9100
laptop. The LCD panel power supply is fried, however the rest of the
machine is ok. Currently using an external monitor.
What has this to do with cooker? well, since the machine is going back
to Gateway sometime in the
I've got beta3 up and running (and infact I'm sending this mail message from
it), so please don't assume I'm a drooling idiot that needs advice.
During the installation (new install to replace the existing partition) I got
the following message when it tried to install the bootloader:
Hello cooker,
I've been looking throughout the day and I've been asking the expert
list also; my last resort is to ask the guys who wrote it! I'm using
mdk 8.1b3 and I've found that aliases are taken from
/etc/profile.d/alias.sh. That being said, when I type 'alias' at the
command
On Sat, 8 Sep 2001, Ben Reser wrote:
I agree that it shouldn't be segfaulting. That's why I'm spending today
figuring out how to patch it so it doesn't. Actually I think I know how
I just need to setup a copy in vmware since my firewall doesn't have
development tools.
Furthermore, As
On Sun, Sep 09, 2001 at 10:54:46AM +0800, Ian C. Sison wrote:
Agreed. BTW, Looking over the KNOWN_BUGS for iptables 1.2.2, it said
4) iptables-restore and -save still have problems. Sorry.
I just feel good that someone's on it. The people at mandrake are quite
packaging the bigger
On Sat, 8 Sep 2001, Ben Reser wrote:
On Sun, Sep 09, 2001 at 10:54:46AM +0800, Ian C. Sison wrote:
Agreed. BTW, Looking over the KNOWN_BUGS for iptables 1.2.2, it said
4) iptables-restore and -save still have problems. Sorry.
I just feel good that someone's on it. The people at
On September 8, 2001 18:04 pm, you wrote:
--- SI Reasoning [EMAIL PROTECTED] wrote:
oops!
here are the error messages before it crashed:
kernel hda: drive-cmd: status=0x51 {Drive Ready
SeekComplete Error}
kernel: drive-cmd: error=0x04 {DriveStatus Error}
Might be just me, but it
On Sat Sep 08, 2001 at 08:36:44AM -0400, Michal Bukovjan wrote:
I think you can safely add Zope again, latest Zope 2.4.1 requires Python
2.1.x, which is in Cooker now.
There should be no problems,
Except that Zope has a worse security history than bind... =( And
that's saying a lot.
--
I have found that I can stay up when in single user
mode, so I checked the logs again and could find no
pattern or clue as to why it was failing. However,
since I could function in single user mode I went back
to runlevel 5 and then closed most of my services
including xinetd. The system is
On Fri, 7 Sep 2001, Brian J. Murrell wrote:
So did he say that he was only saying good things about ext3 not to
step on toes? Or did you ask him why he made the comments he did
about ext3 and he said just to not step on any toes?
Or is it neither of those and you are just putting words in
On Fri, 7 Sep 2001, Brian J. Murrell wrote:
On Fri, Sep 07, 2001 at 12:05:54PM -0400, David Walluck wrote:
For me, it's usually just for workstation use, but I'm glad to see
journaling as I have had ext2 crash
You have had the filesystem crash on you? i.e. The filesystem
corrupted
1 - 100 of 126 matches
Mail list logo