On Fri, 2015-01-02 at 11:09 +0100, Uwe Kleine-König wrote:
Hello Ian,
Uwe, any chance you could try this please:
diff --git a/functions b/functions
index d45a4e6..a7ff6de 100644
--- a/functions
+++ b/functions
@@ -41,7 +41,11 @@ error() {
mtdblock() {
local mtdname=$1
On Tue, 2014-12-30 at 21:32 +0100, Axel Angel wrote:
@@ -7511,7 +7511,6 @@
grub-install: info: executing efibootmgr --version /dev/null /dev/null.
grub-install: info: executing modprobe -q efivars.
grub-install: info: executing efibootmgr -c -d /dev/sda -p 1 -w -L debian -l
On Wed, 2014-12-31 at 06:08 -0200, Rogério Brito wrote:
unarchive 764162
found 764162 3.16.7-ckt2-1
notfound 764162 3.16.7-2
thanks
Hi.
I have a Kurobox Pro that I use as a NAS and I was affected by the network
corruption when the TSO was enabled in versions 3.16 before the version with
On Wed, 2014-12-31 at 12:08 +0100, Axel Angel wrote:
You might find that adding noexec=off to your kernel command line
worksaround this issue.
I can give it a try. Question: isn't it dangerous to enable this flag in
normal use? I guess so.
It's not really dangerous as such, there would
wrote:
On 23 Dec 2014, at 12:59, Ian Campbell i...@debian.org wrote:
Control: reassign -1 xen-utils-common 4.4.1-6
Control: retitle -1 /etc/init.d/xen fails when run in a guest, causing
postinst to fail.
Seems like this issue is in the Xen packages not in the xen-linux-system
On Mon, 2014-12-29 at 13:42 +0100, Martin Lucina wrote:
However, I can't find a full final list of which fixes were backported.
FWIW they are in the source package in debian/patches/series.
Given that the last traffic on #767261 was on November 9th, I suspect at
least this upstream change
On Mon, 2014-12-29 at 10:17 +0800, Chen Baozi wrote:
On Dec 28, 2014, at 17:08, Ian Campbell i...@debian.org wrote:
On Fri, 2014-12-26 at 18:43 +0800, Chen Baozi wrote:
With the attached patch applied, debian installer (tested with
network-console)
can support OMAP5's ethernet
On Sun, 2014-12-28 at 23:02 -0600, Robert Nelson wrote:
On Sun, Dec 28, 2014 at 10:00 PM, Vagrant Cascadian vagr...@debian.org
wrote:
On 2014-12-28, Robert Nelson wrote:
On Sun, Dec 28, 2014 at 6:26 PM, Vagrant Cascadian vagr...@debian.org
wrote:
On 2014-12-28, Ian Campbell wrote
On Sun, 2014-12-28 at 20:00 -0800, Vagrant Cascadian wrote:
On 2014-12-28, Robert Nelson wrote:
On Sun, Dec 28, 2014 at 6:26 PM, Vagrant Cascadian vagr...@debian.org
wrote:
On 2014-12-28, Ian Campbell wrote:
OOI, do you know how broken the white is when booting with the black's
DTB
On Fri, 2014-12-26 at 20:30 +0100, Uwe Kleine-König wrote:
I wonder if flash-kernel should be smart enough to
load the module itself.
I think it should.
I think all which is needed is to add modprobe -q mtdblock into the
mtdblock function. I believe anything which uses an mtdblock device
On Mon, 2014-12-29 at 14:50 +0100, Ben Hutchings wrote:
On Mon, 2014-12-29 at 13:24 +, Ian Campbell wrote:
On Fri, 2014-12-26 at 20:30 +0100, Uwe Kleine-König wrote:
I wonder if flash-kernel should be smart enough to
load the module itself.
I think it should.
I think all
On Mon, 2014-12-29 at 11:30 +0100, Axel wrote:
Package: grub-efi-amd64
Version: 2.02~beta2-19
Severity: important
Dear Maintainer,
* What led up to the situation?
Usual daily upgrade. Including grub-efi-amd64:
2.02~beta2-18 - 2.02~beta2-19~i
(is ~i a typo here?)
The
On Mon, 2014-12-29 at 13:58 +, Ian Campbell wrote:
On Mon, 2014-12-29 at 14:50 +0100, Ben Hutchings wrote:
On Mon, 2014-12-29 at 13:24 +, Ian Campbell wrote:
On Fri, 2014-12-26 at 20:30 +0100, Uwe Kleine-König wrote:
I wonder if flash-kernel should be smart enough to
load
On Mon, 2014-12-29 at 12:56 +, Ian Campbell wrote:
Should I reopen #767261 or file a new bug for this?
A new bug would be best please.
Actually, no need for this, I've applied the fixes locally and am just
building them before pushing.
Ian.
--
To UNSUBSCRIBE, email to debian-bugs
On Fri, 2014-12-26 at 18:43 +0800, Chen Baozi wrote:
On Tue, Dec 23, 2014 at 7:44 PM, Ian Campbell i...@debian.org wrote:
On Tue, 2014-12-23 at 16:27 +0800, Chen Baozi wrote:
I have a glance at the kernel’s installer configs and tried the netboot
without any modification. Some work should
On Mon, 2014-12-29 at 08:41 -0600, Robert Nelson wrote:
On Mon, Dec 29, 2014 at 7:13 AM, Ian Campbell i...@debian.org wrote:
On Sun, 2014-12-28 at 20:00 -0800, Vagrant Cascadian wrote:
On 2014-12-28, Robert Nelson wrote:
On Sun, Dec 28, 2014 at 6:26 PM, Vagrant Cascadian vagr...@debian.org
On Mon, 2014-12-29 at 08:48 -0800, Vagrant Cascadian wrote:
On 2014-12-29, Ian Campbell wrote:
Given the beaglebone specific findfdt which Robert links to above
Several other ti platforms also use findfdt, FWIW.
could we add a check to bootscr.beaglebone which refuses to boot
On Mon, 2014-12-29 at 18:23 +0100, Andreas Meile wrote:
Hello Ben
You're using an old netboot image and this failure is expected.
Thanks for your reply. I exactly supposed the same issue (obsoleted
mini.iso).
The actual problem is not a developement issue, it's an issue that some
On Mon, 2014-12-29 at 16:56 +0100, Martin Lucina wrote:
i...@debian.org said:
On Mon, 2014-12-29 at 12:56 +, Ian Campbell wrote:
Should I reopen #767261 or file a new bug for this?
A new bug would be best please.
Actually, no need for this, I've applied the fixes locally
On Mon, 2014-12-29 at 12:56 -0800, Vagrant Cascadian wrote:
On 2014-12-29, Ian Campbell wrote:
On Mon, 2014-12-29 at 08:48 -0800, Vagrant Cascadian wrote:
On 2014-12-29, Ian Campbell wrote:
could we add a check to bootscr.beaglebone which refuses to boot on a
white? (looks like we can
On Tue, 2014-12-30 at 00:37 +0100, Geert Stappers wrote:
Support for alternative machine name for BeagleBone Black.
The old name was ambiguous with the original BeagleBone (often called
White),
detect if booting on a BeagleBone white and print an error since the
On Fri, 2014-12-26 at 12:46 -0800, Vagrant Cascadian wrote:
On 2014-12-26, Ian Campbell wrote:
On Wed, 2014-12-24 at 12:42 -0800, Vagrant Cascadian wrote:
The following patch adds an additional Machine entry for the more
specific name. Not sure if there's a more elegant way to add an entry
Package: src:grub2
Severity: wishlist
Tags: patch, l10n
Control: submitter -1 Timo Jyrinki timo.jyri...@iki.fi
---BeginMessage---
18.12.2014, 10:50, Ian Campbell kirjoitti:
11.12.2014, 21:59, Ian Campbell kirjoitti:
Please send the updated file to me, or submit it as a wishlist bug
against
On Sat, 2014-12-27 at 18:56 +0200, Timo Jyrinki wrote:
18.12.2014, 10:50, Ian Campbell kirjoitti:
11.12.2014, 21:59, Ian Campbell kirjoitti:
Please send the updated file to me, or submit it as a wishlist bug
against grub2.
Attached is the updated fi.po.
Thanks again.
I just
On Fri, 2014-12-26 at 18:43 +0800, Chen Baozi wrote:
On Tue, Dec 23, 2014 at 7:44 PM, Ian Campbell i...@debian.org wrote:
On Tue, 2014-12-23 at 16:27 +0800, Chen Baozi wrote:
I have a glance at the kernel’s installer configs and tried the netboot
without any modification. Some work should
On Wed, 2014-12-24 at 12:42 -0800, Vagrant Cascadian wrote:
Package: flash-kernel
Version: 3.28
Severity: normal
Tags: patch
When running the 3.18 kernel from experimental on a BeagleBone Black,
/proc/device-tree/model contains TI AM335x BeagleBone Black. With
the 3.16 kernel from Jessie,
On 12/14/14, Ian Campbell i...@debian.org wrote:
Hi,
You are noted as the last translator of the debconf translation for
grub2.
Thank you to those of you who have already submitted translation updates.
It has been brought to my attention that the phrase EFI removable path in
the
previous
On Tue, 2014-12-23 at 16:27 +0800, Chen Baozi wrote:
I have a glance at the kernel’s installer configs and tried the netboot
without any modification. Some work should be done to make debian-installer
support OMAP5 uEVM (e.g., ethernet driver etc).
Right, those should be listed in e.g.
:
On 22 Dec 2014, at 17:25, Ian Campbell i...@debian.org wrote:
On Sat, 2014-12-20 at 20:46 +0100, Sydney Meyer wrote:
Hello Ian,
systemctl status xen.service gives:
Thanks. Sadly these logs weren't as informative a I had hoped they would
be :-/ (In case it's not clear
Hi Manuel,
On Mon, 2014-12-15 at 20:10 +0100, Manuel Venturi Porras Peralta wrote:
Reenvío por la corrección que han hecho desde arriba.
Sent with the suggested changes of the fuzzy removable path and done
the propper translation according to these changes.
I'm just applying this update,
On Mon, 2014-12-22 at 12:47 +0100, Manuel Venturi Porras Peralta wrote:
first of all, thanks for your email. It is ok to submit this es.po
because the fuzzy thing was EFI removable media. It hadn't the media
word so it resulted in a wrong translation, but now it is fixed and
media has been
Control: tag -1 +pending
On Sat, 2014-12-20 at 15:39 +0800, Chen Baozi wrote:
On Dec 19, 2014, at 16:15, Ian Campbell i...@debian.org wrote:
On Fri, 2014-12-19 at 13:38 +0800, Chen Baozi wrote:
I’ve only booted the system by ‘bootz’ without initrd. If I load the raw
initrd image
+extra cpoy of grub-efi to the removable media path
+/boot/efi/EFI/BOOT/BOOT$ARCH.EFI (Closes: #773092)
+ * Make the force_efi_extra_removable debconf prompt only show up when
+configuring grub-*efi*. Closes: #773004
+
+ [ Ian Campbell ]
+ * Improvements to English wording of new
On Wed, 2014-12-17 at 20:15 +, Jonathan Wiltshire wrote:
Control: tag -1 moreinfo
On Mon, Dec 15, 2014 at 08:02:33PM +, Ian Campbell wrote:
The main reason for asking for preapproval is I am trying to decide whether
to
also include a fix for #771249 which is an update
On Sat, 2014-12-20 at 20:46 +0100, Sydney Meyer wrote:
Hello Ian,
systemctl status xen.service gives:
Thanks. Sadly these logs weren't as informative a I had hoped they would
be :-/ (In case it's not clear: this is not your fault)
root@jessie:/home/sydney# systemctl status xen.service
●
---BeginMessage---
On Sat, Dec 13, 2014 at 08:37:10PM +, Ian Campbell wrote:
[...]
I'm afraid this will have marked any existing translations as fuzzy.
Hi Ian,
please find attached updated Czech (cs.po) translation.
Cheers
--
Miroslav Kure
# Czech translation of grub2 debconf messages
On Sat, 2014-12-20 at 09:45 +0100, David Härdeman wrote:
one option that doesn't seem to have been considered would be to create
a separate package (let's call it UEFIx) that installs an UEFI binary to
EFI/boot/bootx64.efi. That binary could then do what the UEFI BIOS
should've done (i.e. look
Package: src:grub2
Severity: wishlist
Tags: patch, l10n
Control: submitter -1 Martin Eberhard Schauer martin.e.scha...@gmx.de
---BeginMessage---
Hi Ian,
sorry for the late reply.
You are noted as the last translator of the debconf translation for
grub2.
I'm quite proud of this prominent
On Sat, 2014-12-20 at 00:57 +0100, Sydney Meyer wrote:
Job for xen.service failed. See 'systemctl status xen.service' and
'journalctl -xn' for details.
Please can you provide the output of these two commands while in this
state.
Ian.
--
To UNSUBSCRIBE, email to
On Fri, 2014-12-19 at 13:38 +0800, Chen Baozi wrote:
I’ve only booted the system by ‘bootz’ without initrd. If I load the raw
initrd image (rather than ‘uInitrd”), when I use bootz, it would output:
Wrong Ramdisk Image Format
Ramdisk image is corrupt or invalid
This is the reason that I’m
On Thu, 2014-12-18 at 20:13 +, Leif Lindholm wrote:
*grumble, accidental send*
:-)
On Thu, Dec 18, 2014 at 08:08:31PM +, Leif Lindholm wrote:
(I don't have an x86 EFI system available to poke around and answer
these for myself).
I'm wondering if we ought to figure
On Thu, 2014-12-18 at 20:08 +, Leif Lindholm wrote:
On Thu, Dec 18, 2014 at 06:35:25PM +, Ian Campbell wrote:
Is PSTORE (going to be) a thing on arm64? (I'm not entirely sure what
pstore is, so sorry if this is a silly question).
I am actually not concerned about pstore
Package: src:grub2
Severity: wishlist
Tags: patch, l10n
---BeginMessage---
Hello,
here is the updated file.
Regards
Vanja
2014-12-11 20:59 GMT+01:00 Ian Campbell i...@debian.org:
Hi,
You are noted as the last translator of the debconf translation for
grub2. The English template has been
On Fri, 2014-12-19 at 11:36 +0100, Vanja Cvelbar wrote:
Hello,
here is the updated file.
Thanks, I've forwarded to the BTS for tracking.
Did you see the updated Call-For-Translations which followed this one
(text below)? I'm afraid there were some changes to the English which
would have
Package: src:grub2
Severity: wishlist
Tags: patch, l10n
---BeginMessage---
On Sat, Dec 13, 2014 at 12:37 PM, Ian Campbell i...@debian.org wrote:
Hi,
You are noted as the last translator of the debconf translation for
grub2.
Thank you to those of you who have already submitted translation
Control: retitle -1 [i18n:cs] Updated Czech translation of grub2 debconf
messages
On Fri, 2014-12-12 at 10:10 +0100, Miroslav Kure wrote:
in attachement there is updated Czech (cs.po) translation of
grub2 debconf messages. Please include it with the package.
Thanks.
I just wanted to check
On Fri, 2014-12-12 at 10:19 +0200, Timo Jyrinki wrote:
11.12.2014, 21:59, Ian Campbell kirjoitti:
Please send the updated file to me, or submit it as a wishlist bug
against grub2.
Attached is the updated fi.po.
Thanks again.
I just wanted to check that you had seen the followup CFT
On Wed, 2014-12-17 at 23:28 +0800, Chen Baozi wrote:
On Dec 17, 2014, at 23:04, Ian Campbell i...@debian.org wrote:
On Wed, 2014-12-03 at 12:18 +0800, Chen Baozi wrote:
Package: flash-kernel
Version: 3.28
Severity: wishlist
Tags: patch
With the patch attached, TI OMAP5 uEVM
Control: severity -1 wishlist
On Wed, 2014-12-17 at 16:30 +, Leif Lindholm wrote:
On Wed, Dec 17, 2014 at 02:57:17PM +, Ian Campbell wrote:
Could we enable CONFIG_PSTORE for arm64 as well, please?
Is PSTORE (going to be) a thing on arm64? (I'm not entirely sure what
pstore
On Thu, 2014-12-18 at 19:13 +0100, Holger Levsen wrote:
Package: src:linux,upgrade-reports
Version: 3.16.7-ckt2-1
Severity: important
Dear maintainers,
I've just upgraded my Genesi EfikaMX nettop from wheezy to jessie and the only
package which wasn't upgraded was
On Thu, 2014-12-18 at 20:20 +0100, Holger Levsen wrote:
Hi Ian,
thanks for the fast response!
On Donnerstag, 18. Dezember 2014, Ian Campbell wrote:
But. I don't think any modern kernel supports the efika, it was removed
from the mainline kernel a while ago (summer 2012 it seems [0
On Wed, 2014-12-17 at 15:10 +0800, Chen Baozi wrote:
Hi Ian,
On Dec 13, 2014, at 20:21, Ian Campbell i...@debian.org wrote:
If you care about Debian Installer support then you should also check
whether any of the newly added modules need to be added to the installer
udebs (which you
On Tue, 2014-12-16 at 17:52 +, Leif Lindholm wrote:
Package: src:linux
Severity: normal
X-Debbugs-CC: i...@debian.org
I noticed efivars was being automatically loaded on boot on my
installed amd64 Jessie, but not on my arm64 Jessie. The
installer/rescue image automatically loads it for
On Wed, 2014-12-03 at 12:18 +0800, Chen Baozi wrote:
Package: flash-kernel
Version: 3.28
Severity: wishlist
Tags: patch
With the patch attached, TI OMAP5 uEVM board is supported.
Thanks.
+Machine: TI OMAP5 uEVM board
+Method: generic
+U-Boot-Kernel-Address: 0x80008000
.
Regards,
--- Omer Zak
On Sat, 2014-12-13 at 20:37 +, Ian Campbell wrote:
Hi,
You are noted as the last translator of the debconf translation for
grub2.
Thank you to those of you who have already submitted translation updates.
It has been brought to my attention that the phrase EFI
On Wed, 2014-12-17 at 18:12 -0400, David Prévot wrote:
Le 17/12/2014 16:59, Ian Campbell a écrit :
On Wed, 2014-12-17 at 20:15 +, Jonathan Wiltshire wrote:
Control: tag -1 moreinfo
On Mon, Dec 15, 2014 at 08:02:33PM +, Ian Campbell wrote:
The main reason for asking
---BeginMessage---
HI Ian,
You can find fixed translation attached to this mail.
Thanks and best regards,
Dooteo
Jatorrizko mezua: lr., 2014-12-13 20:37 +, egilea: Ian Campbell
Hi,
You are noted as the last translator of the debconf translation for
grub2.
Thank you to those of you
I'm currently running with, I'll push it
along with the size reduction stuff.
Ian.
commit 42c4d12d02edbf8ca065d4d21f8fdc668ec095cc
Author: Ian Campbell i...@debian.org
Date: Mon Dec 15 21:25:38 2014 +
[armel] Warn if image size leaves less than 1% spare capacity in the flash
Package: src:grub2
Severity: wishlist
Tags: patch, l10n
---BeginMessage---
Reenvío por la corrección que han hecho desde arriba.
Sent with the suggested changes of the fuzzy removable path and done
the propper translation according to these changes.
By the way, note me as the last translator,
Package: release.debian.org
Severity: normal
User: release.debian@packages.debian.org
Usertags: unblock d-i
Version 2.02~beta2-18 (in Jessie, unblocked by #772959) added a new debconf
template.
A call for translations has been sent out which is has a deadline of the 21st,
I'd like to upload
Source: partman-base
Version: 180
Severity: normal
I have an ARM board (Nvidia Jetson TK-1) which includes an on board eMMC. When
installing the list of devices to select for installation partitioning included
mmcblk1{boot0,boot1,rpmb}. (RPMB == Replay Protected Memory Block).
These are not
Source: linux
Version: 3.16.7-2
Severity: serious
Justification: Not enforcing the ABI will potentially lead to mismatched
modules, breakage of stable updates in Jessie etc
It appears that we are not currently correctly checking the ABI of kernels
against debian/abi/* at build time.
you maybe have an example of that path, which would make it clearer what
it is we're dealing with here?
Regards,
Rimas
2014.12.13 22:21, Ian Campbell wrote:
On Sat, 2014-12-13 at 22:06 +0200, Rimas Kudelis wrote:
Hi Ian,
here's an updated lt translation for Grub.
Thanks, I've forwarded
...@gmail.com:
Hi, isn't this translation made through The Translation Project?
2014-12-13 18:37 GMT-02:00 Ian Campbell i...@debian.org:
Hi,
You are noted as the last translator of the debconf translation for
grub2.
Thank you to those of you who have already submitted translation updates
---BeginMessage---
Hi!
W dniu 13.12.2014 o 21:37, Ian Campbell pisze:
Please send the updated file to me, or submit it as a wishlist bug against
grub2.
Done.
Best regards,
Łukasz Dulny
pl.po.gz
Description: application/gzip
---End Message---
On Sun, 2014-12-14 at 13:51 +0530, Ritesh Raj Sarraf wrote:
Thanks for the report.
grub-install: error: cannot open `/boot/efi/EFI/BOOT/BOOTX64.EFI': File
exists.
The code uses GRUB_UTIL_FD_O_CREATTRUNC which == O_CREAT | O_TRUNC, to
open the destination file, so overwriting should be fine.
On Sun, 2014-12-14 at 16:47 +0530, Ritesh Raj Sarraf wrote:
On 12/14/2014 04:00 PM, Ian Campbell wrote:
/dev/sda2 on /boot/efi type vfat
(rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=utf8,shortname=mixed,errors=remount-ro)
Did all of these options come from somewhere standard
On Sun, 2014-12-07 at 12:22 +, Ian Campbell wrote:
Colin, since the below has a significant impact on the packaging git
workflow I won't take it any further without your input...
On Thu, 2014-11-27 at 19:06 -0400, David Prévot wrote:
Please consider updating translations of grub2
---BeginMessage---
Hi,
I understood it as 'removable media', so I translated it right last time,
Now I just un-fuzzied these messages.
Thanks for your help
On Sun, Dec 14, 2014 at 2:37 AM, Ian Campbell i...@debian.org wrote:
Hi,
You are noted as the last translator of the debconf
On Sat, 2014-12-13 at 18:09 +, Ben Hutchings wrote:
On Sat, 2014-12-13 at 07:57 +, Ian Campbell wrote:
On Fri, 2014-12-12 at 20:59 +, Ben Hutchings wrote:
[...]
I misread earlier - kirkwood is about 2.5 KB below the limit, not 1.
Anyway, both kirkwood and orion5x have much
---BeginMessage---
-=| Ian Campbell, 13.12.2014 20:37:14 + |=-
It has been brought to my attention that the phrase EFI removable
path in the
previous English version is confusing and wrong and should really be EFI
removable media path. Therefore I am sending out an updated po file (see
On Fri, 2014-12-12 at 20:59 +, Ben Hutchings wrote:
That implies we want to allow for about 1% growth
from the size in the .0 release.
I'm considering something like this. What do you think?
diff --git a/debian/bin/buildcheck.py b/debian/bin/buildcheck.py
index a6f6f06..5bb815c 100755
---
---BeginMessage---
On Sat, Dec 13, 2014 at 08:37:13PM +, Ian Campbell wrote:
previous English version is confusing and wrong and should really be EFI
removable media path. Therefore I am sending out an updated po file (see
attached) with this fixed.
I'm afraid this will have marked any
On Mon, 2014-12-15 at 14:34 +0700, Theppitak Karoonboonyanan wrote:
Control: reopen -1
Sorry for the confusion. Bug #773161 and #773160 were duplicated
by mistake, as I took reportbug message wrongly as a failure.
So, I merged them, before Ian closed one and tagged the other.
The result is
On Fri, 2014-12-12 at 20:59 +, Ben Hutchings wrote:
I had originally planned to switch QNAP over for 3.16 but it wasn't
quite ready upstream (I've forgotten why). The board files went away in
3.17 so in experimental (v3.18) appending is necessary. Once I've worked
out some kinks with
Package: git-buildpackage
Version: 0.6.22
Severity: wishlist
The grub packaging git tree[0] uses a git submodule for the debian/grub-extras
directory. However git-buildpackage is unaware of this and ignores it, the
.debian.tar.xz ends up containing the directory itself but not its contents.
It
On Tue, 2014-11-25 at 01:23 -0500, Brian Campbell wrote:
While trying out an upstream kernel build to debug another issue, I
discovered that I couldn't enter any text at my disk encryption
password prompt. After bisecting, I discovered that this was due to a
patch that split xhci-pci out into
On Sat, 2014-12-13 at 11:22 +0100, Christian PERRIER wrote:
Quoting Ian Campbell (i...@debian.org):
On Wed, 2014-12-10 at 23:22 +0100, Christian Perrier wrote:
Package: grub2
Version: N/A
Severity: wishlist
Tags: patch l10n
Please find attached the french debconf templates
Control: tags -1 +pending
On Mon, 2014-12-01 at 02:12 +0800, Chen Baozi wrote:
With the patch attached, the OMAP5432 uEVM can be supported by the current
unstable kernel.
Thanks, I've applied this to the debian-kernel svn tree for the next
unstable upload. For future reference the
On Sat, 2014-12-13 at 12:58 +0100, Guido Günther wrote:
On Sat, Dec 13, 2014 at 08:12:00AM +, Ian Campbell wrote:
Package: git-buildpackage
Version: 0.6.22
Severity: wishlist
The grub packaging git tree[0] uses a git submodule for the
debian/grub-extras
directory. However git
, Ian Campbell wrote:
Hi,
You are noted as the last translator of the debconf translation for
grub2. The English template has been changed, and now some messages
are marked fuzzy in your translation or are missing.
I would be grateful if you could take the time and update it.
Please send
On Sat, 2014-12-13 at 11:22 +0100, Christian PERRIER wrote:
As you had suggestions from other translators to slightly modify the
templates. Would you mind doing the following:
- put my fr.po in place
- change the templates with the new wording
- run debconf-updatepo
- send me (and to the
---BeginMessage---
No big deal, thanks for your effort.
Here's the update for Icelandic.
Sveinn
Þann lau 13.des 2014 20:37, skrifaði Ian Campbell:
Hi,
You are noted as the last translator of the debconf translation for
grub2.
Thank you to those of you who have already submitted translation
if you prefer these or other terms to be
preserved in English. Any feedback is welcome.
Best wishes
Panagiotis Georgakopoulos
ECE Student @ NTUAthens
2014-12-13 22:37 GMT+02:00 Ian Campbell i...@debian.org:
Hi,
You are noted as the last translator of the debconf translation for
grub2.
Thank you
Package: src:grub2
Severity: wishlist
Tags: patch
---BeginMessage---
11.12.2014, 21:59, Ian Campbell kirjoitti:
Please send the updated file to me, or submit it as a wishlist bug
against grub2.
Attached is the updated fi.po.
-Timo
# Esko Arajärvi e...@iki.fi, 2009, 2010.
# Timo Jyrinki
Package: src:grub2
Severity: wishlist
Tags: patch
---BeginMessage---
Þann fim 11.des 2014 19:59, skrifaði Ian Campbell:
Hi,
You are noted as the last translator of the debconf translation for
grub2. The English template has been changed, and now some messages
are marked fuzzy in your
Package: src:grub2
Severity: wishlist
Tags: patch, l10n
---BeginMessage---
W dniu 11.12.2014 o 20:59, Ian Campbell pisze:
Please send the updated file to me, or submit it as a wishlist bug
against grub2.
Hi,
I've translated both new messages. I hope they are correct.
Best regards,
Łukasz
On Fri, 2014-12-12 at 18:12 +, Ben Hutchings wrote:
Package: src:linux
Version: 3.16.7-2
Severity: serious
The kirkwood and orion5x kernel images generally have to be installed
in flash partitions with a fixed size. Currently we check at build
time that vmlinuz is small enough to fit.
On Wed, 2014-12-10 at 23:22 +0100, Christian Perrier wrote:
Package: grub2
Version: N/A
Severity: wishlist
Tags: patch l10n
Please find attached the french debconf templates update, proofread by the
debian-l10n-french mailing list contributors.
If you do not already use it, you might
Package: po-debconf
Version: 1.0.16+nmu3
Severity: wishlist
Using podebconf-report-po --postpone=foo took me through the entire process
before bailing at the end with:
The --postpone and --mutt options require the perl Mail::Box package.
Please install the Debian libmail-box-perl package if
mail in the mbox:
8-
From i...@debian.org Thu Dec 11 09:10:04 2014
From: Ian Campbell i...@debian.org
To: Omer Zak w...@zak.co.il,
Hebrew debian-hebrew-com...@lists.alioth.debian.org
Subject: grub2 2.02~beta2-18: Please update debconf PO translation for the
package grub2
Control: retitle -1 xendomains: support admin configurable delay between
starting guests
On Thu, 2014-12-11 at 11:52 +0100, Fabio Fantoni wrote:
The more useful parameters when mainly windows domUs are used is
XENDOMAINS_CREATE_USLEEP that I setted to 30 or 40 seconds on my systems
to
On Thu, 2014-12-11 at 19:03 +0100, Christian PERRIER wrote:
Quoting Ian Campbell (i...@debian.org):
Looking at podebconf-report-po it seems I could still use it to send out
a request and link them all to this report with:
podebconf-report-po --bts=772771
I'm assuming you haven't
Package: src:grub2
Severity: wishlist
Tags: patch
---BeginMessage---
Hi,
Please find attached
Thanks
On Fri, Dec 12, 2014 at 1:59 AM, Ian Campbell i...@debian.org wrote:
Hi,
You are noted as the last translator of the debconf translation for
grub2. The English template has been changed
Package: rxvt-unicode
Version: 9.20-1+b1
Severity: important
Dear Maintainer,
I use urxvtd via urxvtd -q -o -f and there appears to be a memory
leak of some sort. The process (the child of the two processes which
result from the above) grows without bound until the OOM killer is
invoked and it
On Tue, 2014-12-09 at 12:02 +, Ian Campbell wrote:
I tried running under Valgrind, but urxvtd is sgid so Valgrind is
unable to run (if you know of a workaround for this I'll gladly try
again).
Shortly after hitting Send I had a small epiphany. I
copied /usr/bin/urxvt (nb not urxvtd
On Mon, 2014-12-08 at 01:36 +, Steve McIntyre wrote:
The current package in sid (-17) is unblocked and I think ought to
transition tomorrow (or perhaps Tuesday depending on TZ). I propose to
upload -18 with this change shortly after that happens. Will you take
care of the unblock request
Colin, since the below has a significant impact on the packaging git
workflow I won't take it any further without your input...
On Thu, 2014-11-27 at 19:06 -0400, David Prévot wrote:
Please consider updating translations of grub2, as already provided by
translators since upstream released
On Sat, 2014-12-06 at 18:55 +0100, Ivo De Decker wrote:
Control: tags -1 d-i
Hi,
On Wed, Dec 03, 2014 at 12:14:19PM +, Colin Watson wrote:
On Wed, Dec 03, 2014 at 11:39:14AM +, Ian Campbell wrote:
Please unblock package grub2
Seconded.
This needs the d-i ack.
Right
Control: tag -1 +pending
On Wed, 2014-12-03 at 15:27 +, Steve McIntyre wrote:
On Wed, Dec 03, 2014 at 09:42:20AM +, Ian Campbell wrote:
On Wed, 2014-12-03 at 01:55 +, Steve McIntyre wrote:
On Tue, Dec 02, 2014 at 08:36:31AM +, Ian Campbell wrote:
On Mon, 2014-12-01 at 13:57
501 - 600 of 1693 matches
Mail list logo