For your info, Sholto is 7142Km from you and I am 6466km from you, almost on
the same bearing.
Sholto is 980km from me
I'll listen tonite until about 1300 UTC and try beaconing when the band is
open .will email when starting
Lowest power I can run is 5 watts
John
VE5MU
So I d'loaded SlowfeldXPAS and have it set up on the same frequency, beacon
on as of 0500UTC October 14
Am running 5 watts, with my TS480SAT.
Thought that since Sholto is relatively close to me (within 1000km) he might
have some luck with copying
My beacon.
John
VE5MU
From
I had already grown tired of all of this before.
But there is no right to rest yet if somebody wants to trick us into
silence
out of endlessly attempting to impose a senseless idea by making people
grow
tired of confronting such an absurdity once and again.
There is no worse kind of blindness t
I have been trying to get PCALE functioning with my IC706IIG.
I cannot get the CAT function to work ie. scanning etc.
Transmits (individual call) fine with PTT via com 1.
I have tried using the "Generic Icom" and entering the correct address
etc. and still no joy.
CAT works fine on "Commander" and
>
>OK... I just downloaded #5.
>
>Note that if I use PTT to key the radio, it WORKS (yay!) -- but if I
use
>CAT to key the radio, the radio will key but not unkey.
>
To follow-up my own post... With PTT, keying the radio works fine, but
CAT control (such as changing frequency) is intermittent. It
No problem with multiple links at the same time.
73 Bonnie VR2/KQ6XA
--- In digitalradio@yahoogroups.com, "Andrew O'Brien"
<[EMAIL PROTECTED]> wrote:
>
> Anyone have any general guidelines for multiple ALE links. I had two
> stations link to me at the same time today, has does this impact the
>
Oh, one more thing... for ham radio use of PCALE, I
usually advise most operators when they are starting,
it is best to use the correct procedure for loading
your own callsign, rather than editing the QRG file
using Notepad. This is because in ham radio we have
several different nets, and the
Anyone have any general guidelines for multiple ALE links. I had two
stations link to me at the same time today, has does this impact the
ALE channels and software performance ?
5_'S!JE|+[20:56:35]<<[EA2AFR]NOT AT THE KEYS .. 73 & CU ... -.-
[00:31:05]<<[VE3FWF]DE VE3FWF OTTAWA CA
I'm pretty sure it counts as Digital. LoTW has a provision for JT65
contacts.
Mike, N5UKZ
Dave Bernstein wrote:
>
> Does anyone know how JT65 is counted for DXCC awards? I checked the
> ARRL DXCC and Challenge web pages, but didn't see anything.
>
> 73,
>
> Dave, AA6YQ
>
> __._,_
> Andy K3UK wrote:
> Bonnie, I'm confused. That is the method I am used to but was I
> imagining it or, I think the new version just pops up and asks your
> callsign. No double click foolery.
Hi Andy,
It is possible to have multiple callsigns with ALE.
You may run your ham callsign on the set o
Bonnie, I'm confused. That is the method I am used to but was I
imagining it or, I think the new version just pops up and asks your
callsign. No double click foolery.
Andy
Tony, this is common . PC-ALE has a weird way of entering in one's
own call. I'll send you my unfinished guide that may help.
On 10/13/07, Tony <[EMAIL PROTECTED]> wrote:
>
>
>
>
>
>
> All:
>
> Had to re-download PC-ALE and noticed NOCALL was
> being transmitted instead of my callsign. I
>
>>>AA6YQ comments below
--- In digitalradio@yahoogroups.com, "Demetre SV1UY" <[EMAIL PROTECTED]>
wrote:
I don't see the point of you mentioning it then.
>>>You brought it up, Demetre. You said you didn't understand. I
simply offered an explanation.
Again this is an old horse already beaten t
I would hope that we continue to be progressive and develop new modes.
Are you seriously saying that you oppose further development for
keyboarding? And that we should no longer develop ARQ/robust modes
because we have Pactor?
Several of the modes I had referred to, such as AM and phone patchi
> Tony K2MO wrote:
> Had to re-download PC-ALE and noticed NOCALL was
> being transmitted instead of my callsign.
> Any suggestions..
Hi Tony,
Here is a description with diagrams of how to
set up your own callsign in PCALE:
http://www.hflink.com/pcale/setup/#loadcallsign
73 Bonnie VR2/KQ6X
> A number of fellows tested the new radio control in PC-ALE v1.062H in
the latest builds
> ( #5 being the most recent) with the SDR-1000 and all works just fine
I am told,
> although I wrote it, I don't have one here to test with.
>
OK... I just downloaded #5.
Note that if I use PTT to key th
--- In digitalradio@yahoogroups.com, "Dave Bernstein" <[EMAIL PROTECTED]>
> >>>AA6YQ comments below
>
> >>>There are some who claim that email messages should not be
> conveyed by amateurs because doing so would compete with commerical
> operations, but the same could be said of any QSO. I don'
Does anyone know how JT65 is counted for DXCC awards? I checked the
ARRL DXCC and Challenge web pages, but didn't see anything.
73,
Dave, AA6YQ
Hi Peter,
A number of fellows tested the new radio control
in PC-ALE v1.062H in the latest builds ( #5 being
the most recent) with the SDR-1000 and all works
just fine I am told, although I wrote it, I don't
have one here to test with. If you are using DIG
instead of USB, you need to select
I've tried to use the PCALE program several times now. Each time I try
to use it, I have zero luck.
A year or so ago, I downloaded it and couldn't get it to control my
TS-2000. But I heard there was a new version in the works, so I vowed
not to write it off.
A couple of weeks back, I downloaded
Tony, this is common . PC-ALE has a weird way of entering in one's
own call. I'll send you my unfinished guide that may help.
On 10/13/07, Tony <[EMAIL PROTECTED]> wrote:
>
>
>
>
>
>
> All:
>
> Had to re-download PC-ALE and noticed NOCALL was
> being transmitted instead of my callsign. I
>
>>>AA6YQ comments below
--- In digitalradio@yahoogroups.com, "Demetre SV1UY" <[EMAIL PROTECTED]>
wrote:
I don't understand why all this bashing about illegal and commercial
about Winlink2000. I wonder is it jealousy? Looks like it. Also I
don't understand why a radio ham should not get/send e-ma
--- In digitalradio@yahoogroups.com, Rick <[EMAIL PROTECTED]> wrote:
>
> Demetre,
>
> We only need a modem with adaptive abilities for emergency
> communications messaging and files plus the use of e-mail or similar
> message store and forward systems. For normal keyboard use such
> modes
> ar
Hi Guys,
You need to either use an ASCII editor like NOTEPAD and use find and
replace on NOCALL to change to your callsign and reload the .QRG file
OR
Select an unused SCAN GROUP where no OWN is being used and starting
at the top menu selection Address > Modify > Own and select NOCALL
from
Tony wrote:
>
> All:
>
> Had to re-download PC-ALE and noticed NOCALL was
> being transmitted instead of my callsign. I
> entered my call during the set-up process, but
> NOCALL seems to be set as the default. I tried
> deleting, but keep getting the "NOCALL" in use
> message.
>
> Any suggestions..
All:
Had to re-download PC-ALE and noticed NOCALL was
being transmitted instead of my callsign. I
entered my call during the set-up process, but
NOCALL seems to be set as the default. I tried
deleting, but keep getting the "NOCALL" in use
message.
Any suggestions..
Tony K2MO
I keep trying Linux with the same reaction. In the past I worked on as many
as three different computer systems and OSs with embedded system
development. I could always easily adapt to whichever machine I was on.
Linux just always drives me nuts trying to get aspects of it to work. I am
trying it a
Demetre,
We only need a modem with adaptive abilities for emergency
communications messaging and files plus the use of e-mail or similar
message store and forward systems. For normal keyboard use such modes
are of limited value and since most take up a large amount of bandwidth,
are to be avoi
One other VERY useful aspect of ALE and the system that Bonnie has
set-up at hflink.com. I load up my ALE software, send out a station
ID on a few bands and in less than a minute receive confirmation that
I am...
being heard in NJ and Quebec on 40M and Georgia and Illinois on 30M
N2CKH: [17
29 matches
Mail list logo