Dear DuoListers,
I've been thinking about a hack that I don't think
I will try to do, but I've been wondering if anyone
else might have considered it or would be willing
to speculate about it.
There are tons of older unused PowerBooks in
existence (in attics, closets, boxes, drawers and,
of
OK.
I've decided to give one last effort into curing my 2400 of the
GLOD, even tho, someone has made an offer to trade.
After testing resistors ( in a series ) on the processor daughter
card, I'm beginning to think it's not the processor causing the GLOD.
The Powerbook continues to charge the
Nah, no spare parts. I may take you up on the offer and send it to
you. Or, considering I'll need a spare motherboard, from which to
obtain the second VRAM DIMM, maybe it would be a good idea for me
just to buy one. Uh-oh! Here we go again ! Man, I just can't get
myself to give up tinkering
Hiya folks,
I'm close to giving up in my attempts to ressurect my 2400c.
All the fuses seem to check out, via my Radio Shack multimeter... so
I'm thinking it's the processor...
Maybe I should've taken the one offered to me for $35.
My replies to the one person who seems to have one now seem not
Dear List,
I have a 270, 2300, and a 1400. Now and then the top half of the
1400 screen will
be marked by horizontal lines every 2 centimeters or so. Yesterday
it went from this
to a normal screen, then the backlight died, then in a couple of
minutes the screen
went totally black. I tried
Hi does anyone know if a 2400 with GLOD is easy to fix?
Alex
Depends. If you are lucky, its a software reset. Less lucky, but
not too bad, is a fuse replacement. Bad, is a new powerboard or CPU
is needed.
What have you tried so far ?
Mad Dog
--
Duo/2400 List, The friendliest place on
There is one on auction with this condition.
I appreciate your help.
thanks so much.
Alex
I would guess that without testing, the GLOD is probably fixable by a
fuse replacerment, or at worst, a new powerboard. Roll the dice
though...
Mad Dog
--
Duo/2400 List, The friendliest place
Wanted to buy: A working G3 CPU card for the powerbook 2400.
thanks,
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at http://www.themacintoshguy.com/lists/DuoListFAQ.shtml
Be sure to visit Mac2400!
You and a long list of people! Have you seen what they go for on ebay
lately?
Tom
I think a 400 MHz card went for $600. A recent 320 MHz unit was
going for $450 last time I looked. I figure I could only afford a
240 MHz unit. : )
Mad Dog
--
Duo/2400 List, The friendliest place on the
YIKES!
$665 was it?
I feel fortunate now that I spent $250 for a Vimage 320 a few weeks ago.
Is anyone on the list going to claim that V 400 as theirs now? I
thought maybe it might go for over 300, but $600?
pb 2400 market depressed indeed..
Greetings from CajunLand USA South Louisiana
Sid
as a PC user the standard (and always the same) 9pin
RS232 port on a PC is 'normal' to me.. but the port on
this mac... thats a different story... according to a
document i found on the web pins 1 2 should be
hardware handshake... but on this 280c they dont seem
to work.. is this true? or have i
In a message dated 7/10/2004 2:26:49 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Well there is one on ebay now and the seller also has the infamous
interware 400mhz g3 card for sale on ebay currently at $90.00 I know
there are people here interested in that item!!!
Gee, thanks; Wille,
Hey folks. I recently lost out in an exchange for a G3 upgrade amd
some spare parts for my trusty comet ( small claims court, here I
come ) and, as such am in need of a processor card and some Surface
Mount Fuses for my PowerBook 2400c. I don't want to lowball anyone,
but I've already lost
Here's an asteroids clone:
http://mac.the-underdogs.org/index.php?show=gameid=256
Really neat site!
http://mac.the-underdogs.org/
Maelstrom, from www.ambrosiasw.com is probably what you want.
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac
Good morning...
I did a excellent physical impression of Dr. Hfuhruhurr from The Man With
Two Brains last night, as I opened up three (count 'em, THREE!) non-working
2400c at the same time for a Part Swap Free-4-All...
...and STILL could not come up w/ one working one! ;-)
I have two
In a message dated 5/12/2004 6:31:00 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Did you check the fuses on each unit ?
Hi,
Another lister turned me on to a webcite that explained how to replace the
F1 fuse, which might be the source of my problems with the white screen
2400c I have:
I have a problem, and please forgive me if this is a FAQ -- I
searched the archives without much success. A friend recently gave
me a PB 2400c that had belonged to her deceased boyfriend. It came
with the power supply, and that's IT. ALL the software was wiped,
including the system
Do you get the blinking floppy disk icon ?
Not even that. Maybe I have a more serious problem than I thought.
Does the sleep LED blink ? If you dont even get the screen to power
on, you may have the dreadedGLOD.
1) Use an external CD Rom hooked through the SCSI port. Boot off
of the OS
Do you get the blinking floppy disk icon ?
Not even that. Maybe I have a more serious problem than I thought.
Right. Having dug out an external CDR and hooked it to the SCSI port
with a MacOS system disc in it, and having still the symptom of a
screen that's just blank (dark grey, though lit),
Does the sleep LED blink ? If you dont even get the screen to
power on, you may have the dreadedGLOD.
The sleep LED blinks. And I've hooked up an external monitor to the
PB, and it turns out not to be wiped at all (I only had the GF's
word that it had been wiped, actually it's fully
I have a newer 240 card that I'm SURE is fried. If I had ~$250 to
spend, I'd send my 2400 in. (Install G3, GLOD, install 603e, boot,
install G3, GLOD, and so on).
Just out of curisoity, what are the symptoms ? How did it die (I
will be getting one of these soon) ?
thanks,
Mad Dog
--
I'm wondering if I can substitute one of the much cheaper 1400
replacement batteries I see on ebay for the dead one on two of my
2400s?
Greetings from CajunLand USA South Louisiana
Sid Barras
They are not the same.
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv
Who was selling the G3 card for the 2400 again ? I emptied my trash too soon.
thanks,
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at http://www.themacintoshguy.com/lists/DuoListFAQ.shtml
Be sure to visit Mac2400!
Tested working; complete in box w/ software + manuals.
Best ofers; e-mail me directly please,
''
'''
K. Ballard, Athens Georgia (GO DAWGS!)
Mac Powerbook Sales
In a message dated 4/3/04 8:38:16 PM, [EMAIL PROTECTED] writes:
I am thinking about buying a G3 upgrade for my 2400. How much are
the 240 MHz (Newertech ?) upgrades going for these days ? Anyone
have one for sale ?
M.D., I would have thought that a G5 neatly soldered in would be your
I am thinking about buying a G3 upgrade for my 2400. How much are
the 240 MHz (Newertech ?) upgrades going for these days ? Anyone
have one for sale ?
thanks,
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at
Try this extension, it is an Apple extension that I
modified, it should be able to recogonize, mount and
even make a bootable drive from any brand CD rom.
It worked well for a Panasonic and a Sony.
Make sure to remove all other Apple and 3rd party cd/
dvd extensions and place this in the
Thanks for all the help. No matter what I try (including
silverlining), the best I can do is see the CD ROM as corrupt or
damaged. It will never mount. I swapped cd mechanisms to get the
same problem. So, it would appear that the SCSI on this 2400 is dead.
Fortunately I have 3 spare power
I am trying to connect an external CD ROM to my 2400. I have it
terminated and hooked up correctly (as far as I can tell), but I cant
get the 2400 to even see the hardware. Is there some sort of
extension required on the 2400 for SCSI use ?
thanks,
Mad Dog
--
Duo/2400 List, The
Not for SCSI, just for the CD drive.
Some of the options under OS 8.6 and lower include the 7.6.1 Apple
CD-ROM extension which booted 3rd party drivers or a generic driver
like FWB or other HD utilitypossible the one your drive came
with.
I have the apple CD/DVD driver that comes with
I seem to recall that there is an old program that will reset the
power manager for Duos. However, I dont remember the name.
ResetPwrMgr by Randall Voth. I can send you a copy if needed.
Nick Lowe.
NIck, I just found it on the web.
thanks,
Mad Dog
--
Duo/2400 List, The friendliest
I have a Duo battery problem that is really driving me nuts. I have
have 6 Duo motherboards (almost one of each type) that have been
sitting in my house for over a year. Recently, I brought them out,
fitted them into complete Duos and tried to get them to run off
batteries. No go. I tried
I seem to recall that there is an old program that will reset the
power manager for Duos. However, I dont remember the name. Anyone
come across something like this ?
thanks,
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac
Hola; long time Duo user (since '93) - Recent 2400c owner..
Right now I am restricted to using my newly acquired 2400c/180 at home,
because it will not recognize the battery; trouble is, I do not know
if this is
because the battery is bad or the contacts are bad...
The battery meter in the
In a message dated 3/3/04 10:03:40 PM, [EMAIL PROTECTED] writes:
Blown battery fuse ? F2, IIRC.
Okay... you have me at a distinct disadvantaage...
WHa?
Craig W.
I imagine, that fuse F2 on the power board is blown. I think that
fuse controls whether or not the battery shows up. The only
I also have a 'Book, which refuses to work.
I've checked all the fuses with a digital multimeter ( Radio Shack
device, makes a sound if the fuse carries a current ) and all the
fuses check out. The previous owner says it simply never woke from
sleep, and, I wonder if it isn't the processor
If you want to get into the guts of the 2400, try this page:
http://www.ab.aeonnet.ne.jp/~tkishino/index.html
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at http://www.themacintoshguy.com/lists/DuoListFAQ.shtml
Be
Hi!
There would not normally be a voltage rating for a fuse, because they
work on the amount of current passed, not the voltage. 5 amps at 1 volt
is the same as 5 amps at 110 volts as far as a fuse is concerned. A
fuse has a very low resistance, and works (blows) only on the basis of
the
Does anyone know the voltage rating for the 5.0 A fuse (F2) on the
2400 power board ? The fuse is marked :
50 C
5 A
I bought some 5.0 A fuses, but they are physically smaller (63 V DC).
The Digikey part # for the fuses I bought is 283-2452-1-ND.
thanks,
Mad Dog
--
Duo/2400 List,
Test. NO list mail for 12 hours.
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at http://www.themacintoshguy.com/lists/DuoListFAQ.shtml
Be sure to visit Mac2400! http://www.sineware.com/mac2400
To unsubscribe, E-mail
I am potentially interested in parting it out;
however, not wanting to be left with part of a 2400
for which I have no use, I've got a slight preference
for selling it as a unit.
What parts specifically are you interested in?
I'd like to spend some time gauging interest (probably
this weekend),
hi,
my duo 270c has broken, so now I'm using a new powerbook 280c
upgrated to 2300c
it is a nice machine, but I got a little problem. I'm using a
reconditionated (by my father) battery of the old duo 270c, and the
living time with the 280c/2300c is more short: the same battery
give me 1h30m
Mad Dog..
There is F1 through F5 on the logic board, then F1 through F11 on
the Power Manager.
I can't find F1 on the Power Manager. Unless they begin at F2 on the
PM.? But that makes no sense.?
Power Manager = Power Board ? If so, I cant find a F1 on it either.
I never noticed the
After checking nearly all the fuses in my Comet (I can't find F1 on
the Power Manager.help me out, if you know where it is), I think
I may have a dead daughter card.
F1 is on the motherboard, topside, near the Texas Instruments chip.
Mad Dog
--
Duo/2400 List, The friendliest place
The goods:
One powerbook 2400c. normal wear but nicely kept,
body intact, not cracks,etc. Screen is perfect.
Original drive. Yu keyboard (right arrow key doesn't
make contact). Speaker intact, port cover intact.
One external CD plus SCSI cable.
Three batteries Aprrox 45,60,90 min charges.
NO
The goods:
One powerbook 2400c. normal wear but nicely kept,
body intact, not cracks,etc. Screen is perfect.
Original drive. Yu keyboard (right arrow key doesn't
make contact). Speaker intact, port cover intact.
One external CD plus SCSI cable.
Three batteries Aprrox 45,60,90 min charges.
NO
Alright, I have a few 2400 items I can't do anything
more with, maybe some of you on the list want to try
them!
2400 180/80. No internal hard drive; trackpad ribbon
cable is broken. This is best used as a parts
machine. The screen still works great, PC Cards work
great, just wasn't very stable
I am potentially interested in parting it out;
however, not wanting to be left with part of a 2400
for which I have no use, I've got a slight preference
for selling it as a unit.
What parts specifically are you interested in?
I'd like to spend some time gauging interest (probably
this weekend),
Earlier I was having an issue with 8.5 and up not booting unless I removed
the System Resources file from the System Folder. Well, I installed my new
logic board today, and that problem has gone away. My bottom PCMCIA slot
works now, as well.
While I was in the machine, I installed a 3GB 9.5mm
--- Tom and Lisa P [EMAIL PROTECTED] wrote:
Whats the trick for resetting the power managed on a
Duo ?
Remove battery, unplug AC adaptor from the Duo, close
lid, press power button on rear of Duo for 30 seconds.
Open lid, plug in AC adaptor and boot up, then insert
battery.
Leave the PRAM
--- Tom and Lisa P [EMAIL PROTECTED] wrote:
Whats the trick for resetting the power managed on a
Duo ?
Remove battery, unplug AC adaptor from the Duo, close
lid, press power button on rear of Duo for 30 seconds.
Open lid, plug in AC adaptor and boot up, then insert
battery.
Thanks Gregg.
Mad
The 3400 does not have room for more VRAM. There are no open pads
like the 2400 has. The 3500 might have 2 MB of VRAM, but the only
3500 board I have is dead, so I cant be sure.
-Mad Dog
I never said the 3400 had room for more VRAM, I simply stated it
came with 2mb, which would indicate that's
I have Duo items for sale and I will take any reasonable offer. The
components are functional, but there are some defects that others
might think need repair, although I learned to live with them. I
am willing to break the package up if there are no offers for the
components as a group.
1)
I no longer have the URL, as I saved the page as a PDF, in Safari.
It seemed like the best idea at the time, as the page was in
japanese, and I had to translate it through another web page. The
translation was incredibly rough, to say the least, but the photos
were good, so saving as PDF has
Whats the trick for resetting the power managed on a Duo ?
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at http://www.themacintoshguy.com/lists/DuoListFAQ.shtml
Be sure to visit Mac2400! http://www.sineware.com/mac2400
Someone in Japan has done it, and I'm purchasing a dead logic board
this week, to attempt a transplant. I'll keep you posted.
-Antonio
Please do.
Mad Dog
Hmmmone of those wish I coulds.
I'd like to add video memory to a 2300. Do you have a URL for
said someone in
Someone in Japan has done it, and I'm purchasing a dead logic board
this week, to attempt a transplant. I'll keep you posted.
-Antonio
Please do.
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at
Peter Liethen, were you ever able to get an additional 1 MB of VRAM
working on a 2400 ?
thanks,
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at http://www.themacintoshguy.com/lists/DuoListFAQ.shtml
Be sure to visit
Any one know who sells replacement backlights for LCD's?
Thanks
Dean
Try www.digikey.com
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at http://www.themacintoshguy.com/lists/DuoListFAQ.shtml
Be sure to visit Mac2400!
I tore my GLOD/COD 2400c down tonight (again). While it was apart, I
decided to track down and test every fuse that I could find on the thing.
There is a 2A fuse at F4 on the underside of the logic board that is bad.
It is almost dead center of the board.
www.digikey.com has just about any
ON a Duo 2300, there is a 1 square doo-dad. It has 10 pinds and is
near the AC port on the back. It is marked:
BI 9542A
157S0174
Presumably this is some sort of transformer. A quick look on
www.digikey.comw as no help. Can anyone tell me what this is ?
Mad Dog
--
Duo/2400 List,
Hi all,
I've been reading the DuoList for several months now
and learned of the 2400 GLOD problems. I'm curious if
anyone has looked at the design and tried to improve
on it? My thoughts are:
1) If it's heat related, the regulator IC may need a
better heatsink. The AC adapter puts out 24 Volts and
I used to think I had all my duo battery problems licked. Guess not.
As of 6 months ago, I had 5 working duo batteries, from 50 minutes to
150 minutes of battery length, as measured by Battery Amnesia.
As of 2 weeks ago, none of them work, including my 2 yr old recelled battery.
1) All of
And since this particular model was actually
manufactured by IBM for Apple, could it be possible
that some of its parts are the same as that of IBM
ThinkPads? Would it be a good idea if I take it to an
IBM ThinkPad Service Center instead or a PC repair
shop instead that specializes on laptops
I wrote:
Or . . . DL this file ({[EtherTech Installer.smi].sit}.hqx) from OWC:
http://eshop.macsales.com/Tech/FTP/newertech/ethertech.hqx
to which Mad Dog (Tom P) [EMAIL PROTECTED] replied:
Thanks Dan, that did it. I luv this little dock. I just have to
resist the urge to open it up and see if I
Inquiring minds want to know...Do not resist your urges, Igor...
N, n... I mustresist...
But I also... must... experiment.
SOooo confused..
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac
Apparently it is one of those highly annoying
installers that insists it must install from a disk
with a specific name and will not install to the disk
it's currently on even if that disk has the right
name.
So you'll have to format a floppy, name it EtherTech
Installer, copy the installer to it
Hey Mad,
try dropping the folder on Disk Copy and have it build a disk image from
that. Then mount that disk image, installer should work then.
Or . . . DL this file ({[EtherTech Installer.smi].sit}.hqx) from OWC:
http://eshop.macsales.com/Tech/FTP/newertech/ethertech.hqx
That .smi file wouldn't
I recently got a Newertech Etherdock and I cant install the software.
It keeps asking for the disk named EtherTech Installer. According
to the read me I have to make sure the installer folder is named as
such, which I did.
I can screw around with the installer, or can someone tell me what
Basically, just put the battery in and then ran the Graphing
Calculator Demo until the PB generated the 'going to sleep' warning.
Does Battery Amnesia work on a 2400 ?
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at
Hi listers,
My 2300c is no longer running off the (fully charged) battery, even though it
DOES see and charge(!) the battery. When it is up and running, I see the
battery charging via the control strip and the superclock indicators. When I
remove the battery, it says no battery. When I insert it,
Only applicable to Ni-Cad/Ni-MH is my understanding. The Li-ions
don't suffer from memory effect and also have a pretty sophisticated
controller in the battery to make it all work.
Basically, just put the battery in and then ran the Graphing
Calculator Demo until the PB generated the 'going to
I've been lurking on this list for a while - time to come out
of the woodwork!
I have an original Duo 2300c/100 PPC 1 GB ATA HD, 32 mb RAM. In
replacing the clock battery, I managed to break the trackpad cable,
and I can't find a replacement. Maybe you have the parts or maybe
better luck. I was
Hi, I have a 280 (grayscale) which is starting to have the fading
corners problem. (I think) For a 1/4 of an inch inward on every
corner the screen is definitely faded; I noticed it earlier (2
months ago or so) but it was more mild back then. My questions are:
1)How do I get rid of this? 2)
Do you know if the official upgrade was just the motherboard or did it
also include the bottom of the case as well? Someone mentioned it
included some case replacement parts while using most of the existing
case.
Phil
Hmm I have seen some 2300 upgrades on ebay that came with the
bottom case,
Can a 2300c screen be put on a 280? I know a 280c or 280 screen can
be used on a 2300 but can vice versa? Also, can a 280 trackball
work on a 2300? Thanks, all!
--
Andrew
a.k.a.- The MacFreak
The concsensus is no, you cant (2300 screen on a 280 mobo). Some
people have tried and ended up
I have some questions regarding the PowerPC upgrade Apple offered to
Duo 2xx series owners. Is there any difference between the official
upgrade and just swapping in a 2300c logicboard? With the official
upgrade did the upgraded Duo appear as a 2300c in the About This
Macintosh dialog box for
Hello,
I read your post from Aug 31 about 2400c parts. I'm in need of a
working I/O powersupply board. If you still have one available,
what is your bottom line price?
Thanks!
Peter Zwarych
Who in particular is this aimed at ?
Mad Dog
--
Duo/2400 List, The friendliest place on the
This is kind of embarrassing... but where on the motherboard does the
PRAM battery plug in ?
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at http://www.themacintoshguy.com/lists/DuoListFAQ.shtml
Be sure to visit
Anyone have a 2400 CPU card for sale ? While a G3 would be nice, I
doubt I can afford one, so 603e cards are fine.
Mad Dog
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at http://www.themacintoshguy.com/lists/DuoListFAQ.shtml
So now I have two Duos with the 250 screen (one an original and one PowerPC
upgrade (AKA 2300 base). Both showing the symptoms of gradual darkening from
the corners and the viewing of the image through a porthole - sort of a
visual 'Cone of Silence'.
I have read a lot of the posts with all the
on 9/10/03 9:35 PM, Goodwin, Greg at [EMAIL PROTECTED] wrote:
Thanks! The keyboard is very hesitant. Any way to rework it, make it work
smoother?
Otherwise, love it. Got the computer and Duo Dock (one working,
one not) for
like $12. :) I like how I can BBS at home and then take it to
I notice there is a small swtich on the 2400 motherboard:
1) exp ROM install
2) exp ROM boot
Anyone know what that does ?
Second question: Other than swapping parts around, is there anyway
to tell what component (powerboard vs motherboard vs CPU board) is
causing a GLOD ?I notice my on
I have one FrankenDuo for sale.
Based off of a Duo 230, it has the following stats:
-12 megs of RAM
- 160 meg hard drive (a scan shows no problems)
- comes with AC adapter (M7783)
- comes with a working battery (gave 50 and 65 minutes respectively
on 2 tries with Battery Amnesia)
- system
Hello list,
I've been lurking this month but I now have reason to post. :)
I am now the proud owner of my first PB Duo 2300c with 3 docks! I
already own a PB Duo 270c and I bought a PB Duo 230 (mistook the
model number when I glanced at the posting as a PB Duo 280) on eBay
earlier this year.
Vic Duong [EMAIL PROTECTED] wrote:
PC cards are a possibility if there exists a NUBUS PC card adapter like the
PCI offerings. Anyone knows if this beast exists?
I don't know but I've never seen such a thing.
From where I sit, the issues are twofold:
1) a cards other than storage require a
I thought I'd expand the survey. For those who have had it happen,
do you have any theories on why (excess sleep, plugging/unplugging
the power supply while on, etc.) it happened? Has anyone had it
happen after DTT replaced the IO Board? Obviously those new to the
2400 wouldn't really know.
In a message dated 8/5/03 11:46:11 AM, [EMAIL PROTECTED] writes:
I had a hard time starting it up from the adapter and my clock is reset to
1/1/04 after I finally got it to boot from the power adapter. Could it be
both? Could the PRAM battery prevent the battery from charging?
Sounds like a
Update the profiler recognizes the modem is there. Could the modem
portion not work
and the ethernet work? I just believe that something in one of the
control panels
needs to be set differently.
Dan in AZ
If I recall correctly, there is a special extension (or was it a
control panel) that
In a message dated 8/5/03 7:10:35 PM, [EMAIL PROTECTED] writes:
Most PRAMs I have looked at have one of the 2
cells nearly dead, while the other is a lot closer to the charged 3.0
V. I _think_ when the PRAM gets charged up, it looks at either cell
for 3.0 V.
Hmmmworth looking at. This
Have you got a pic of the adapter? Care to share some details about
how you made and use
it?
Chuck
From: Tom and Lisa P [EMAIL PROTECTED]
I made a little adapter that charges only one cell, and that
gets both to 3.0 V. After that the PRAM seems to do better.
On the other hand, I could just
I've read that the Duo 2300 mainboard supported all
previous Duo LCD screens because it was also available
as a (factory installed) upgrade.
How did that work with the CPU heatsink tab on the
frame being in different places on the 030 and 040
models?
The 2300 motherboard came with a bat wing thin
Hi listers,
Did the swap list thing, but few takers...
If anyone needs practically anything Duo, e-me off list please...
K. Ballard,
Mac Powerbook Sales
Sell'r of Fancy Cipherin' Devices!
Duo 2300 motherboards ? I could use a few for some
Hi listers,
Did the swap list thing, but few takers...
If anyone needs practically anything Duo, e-me off list please...
K. Ballard,
Mac Powerbook Sales
Sell'r of Fancy Cipherin' Devices!
Duo 2300 motherboards ? I could use a few for some
Dear List:
Can you guide me to where I might buy a replacement for the lower clicker on
my beloved 280c?
One of the plastic arms snapped, and my usual supplier for parts and service
has gone dry.
Many thanks in advance,
Pete
The clicker mechanism itself or the plastic arm that is part of the case
I hve several Duo 280 screens that go dark in the corners after the
screens are on for some time. The last theory I heard about this
problem was that it was the backlight going out over time.
To confirm this, I tried an experiment. I removed the backlight and
left the duo on for 4 hours one
I have a 270C that has this problem, sometimes. Does your screen
also have problems with the image sticking on
the screen. By this I mean that it seems to burn itself into the
screen and is still visible after the machine
is turned off and also the old image is still there when the machine
is
Mad Dog wrote:
I think the corners are getting stuck and not relaxing back into
transparency. I dont recal seeing old images. My next wild guess is
to replace several capacitors on the LCD power board and see if that
works.
I know it ain't the backlight, and I seriously doubt it's the power
In a message dated 7/18/2003 7:40:48 PM, [EMAIL PROTECTED] writes:
What type of mods are we talking ? I would like to see this work if
possible.
Mad Dog
Eh...don't really remember all the items..it was complicated and not
something which appealed to me. Saw it on an old website...took a
mod
In a message dated 7/18/03 4:35:25 PM, [EMAIL PROTECTED] writes:
Can A Duo 2300c Screen Work On A Duo 280c Mobo??
Nope, not without serious mods. The reverse will work, as the 2300 will
accept any display.
Cheers!
Andrew
What type of mods are we talking ? I would like to see this work if
1 - 100 of 121 matches
Mail list logo
