[Dx4win] Polling rate

, FT1000MP CAT baud rate is set to 4800. How high could be increased to? 73, Radi F6GNZ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net

[Dx4win] Radio timed out

Recently I have started to get the radio timed out messages from DX4WIN, without doing absolutely anything, not transmitting, not even touching my FT1000MP... DX4WIN is in pure standby state, only receiving the packet spots. What could be a reason for this??? 73, Radi F6GNZ

Re: [Dx4win] 3B9FR as an example...

I sent to Robert several direct QSLs with USD's, the last one last year via the registered mail, post office confirmend delivery, but never get any QSL from him! Fortunately, I made several QSOs with the HB9 group recent DX-pedition there and got their QSLs... 73, Radi F6GNZ Le Mardi 29

Re: [Dx4win] [microHAM] MicroKeyer2, DX4WIN, HDSDR and Omni-Rig

time fixed to 1 seconds whatever is saved in Preferences ! Maybe Joe will tell us how it exactly works. 73, Radi F6GNZ De : Larry Gauthier (K8UT) k...@charter.net À : Radivoj Kar, F6GNZ f6...@yahoo.com; DX4WIN Refelector dx4win@mailman.qth.net Envoyé le

Re: [Dx4win] [microHAM] MicroKeyer2, DX4WIN, HDSDR and Omni-Rig

is disabled”.    WHY?? What am I missing??   The corresponding Router configs for splitter functions are: FT1000/MK2/DX4WIN:  CAT1 = COM4, CAT2:=COM2, PTT:=COM4 IC706/MK1/DX4WIN :  CAT1= COM8, CAT2= COM3, PTT:=COM4   73, Radi F6GNZ De : Radivoj Kar, F6GNZ f6

[Dx4win] MicroKeyer2, DX4WIN, HDSDR and Omni-Rig

use spot clicks to set up the TX/RX frequencies,  nor  control my antenna rotator. Is there any way to make the above combination work together??? Best 73, Radi F6GNZ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo

Re: [Dx4win] Spots and spotter callsigns in BandMap

for example in 50 MHz window and knowing where they have been heard, gives immediately the idea what paths are opened.. 73, Radi De : Paul van der Eijk pvandere...@gmail.com À : Radivoj Kar, F6GNZ f6...@yahoo.com Cc : DX4WIN Refelector dx4win@mailman.qth.net; supp

[Dx4win] Spots and spotter callsigns in BandMap

window). This would be very useful to see the propagation circuit openings for higher bands (50, 144 MHz...) in order to beam the antenna in right direction when trying to call CQ or listen for others in these paths... 73, Radi F6GNZ

Re: [Dx4win] Spots and spotter callsigns in BandMap

De : Radivoj Kar, F6GNZ f6...@yahoo.com À : DX4WIN Refelector dx4win@mailman.qth.net; supp...@dx4in.com supp...@dx4in.com Envoyé le : Lundi 15 avril 2013 21h54 Objet : Spots and spotter callsigns in BandMap Hi, Here is my proposal for one of the next

[Dx4win] Cannot focus a disabled or invisible window

a command from me. Have to close it by force, HI! Any reason for thios??? 73, Radi F6GNZ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net

[Dx4win] USB interfaces stop working

, when you see interfaces stop working, check if the QRO was not the reason, HI! BTW: Windows automatic update has updated my FTDI USB/RS232 drivers with version 2.8.24.0, dated 10.4.2012. But the Router 8.1.2 still kept the original FTDI driver v. 2.6.0.0. which still works FB. 73, Radi F6GNZ

[Dx4win] FSK RTTY with DX4WIN/MMTTY and microKeyer

and MMTTY display shows normal RTTY display at TX, but nobody answers my calls on their frequency ! I have no test bench nor another RX at hand to check what might be happening. Has anybody an idea what's going on??? 73, Radi F6GNZ __ DX4WIN

[Dx4win] Re : Re : Windows 7

1 hour of operation, then suddenly SteppIR or antenna rotor stop responding :( 73, Radi F6GNZ De : Jim Reisert AD1C jjreis...@alum.mit.edu À : microHAM America - W4TV supp...@microham.com Cc : Radivoj Kar, F6GNZ f6...@yahoo.com Envoyé le : Vendredi

[Dx4win] SteppIR and radio stop responding in Win7

I found the reason, but do not know how to solve it: not only the SteppIR but a radio via USB Router and a rotor control stop to wrk from time to time: USB FTDI/RS232 converters stop to communicate with PC and i must plug them out and in again to make them work again!

[Dx4win] Windows 7

to unplug and plug-in the related USB cable, then it re-starts working, except that in some cases I need to exit DX4WIN and re-start it again ! Any suggestions how to solve this issue??? 73, Radi F6GNZ __ DX4WIN mailing list Home: http

[Dx4win] Re : Windows 7

Jim and Joe, Thank you very, very much for the info. I have already set my power saving options for max performance, but kept hibernate at lid closure and haven't done anything with USB power settings. Will now fully follow Joe's advice ! Best 73 and thanks again, Radi F6GNZ

[Dx4win] Re : Windows 7 : it works !

when doing this, each time I open DX4WIN I must respond to the User Account Control alert message do you want to allow... Any clue how to avoid getting this message??? 73, Radi De : Jim Reisert AD1C jjreis...@alum.mit.edu À : Radivoj Kar, F6GNZ f6...@yahoo.com

[Dx4win] SteppIR and radio stop responding in Win7

Hi, Installed DX4WIN 8.05 to my new Windows 7/32 bit Home and since have problem of controlling SteppIR and radio (all was OK on my old Win2000 PC): SteppIR controller in General Freq. mode, controlled via FTDI USB/RS232 cable on COM7 As soon as I start DX4WIN and select a spot, SteppIR

[Dx4win] Re : IC735 remote control

Hi Mel, Thanks for your comments. Please find my responses after your text: Best 73, Radi F6GNZ De : Mel ve...@videotron.ca À : Radivoj Kar, F6GNZ f6...@yahoo.com Cc : DX4WIN Refelector dx4win@mailman.qth.net; supp...@dx4win.com supp...@dx4win.com; John

[Dx4win] Tr : IC735 remote control

Info for those interested in this topic. 73, Radi F6GNZ - Mail transféré - De : Jim Hargrave w5...@gvtc.com À : Mel ve...@videotron.ca Cc : DX4WIN Refelector dx4win@mailman.qth.net; supp...@dx4win.com; John Sweeney johns...@comcast.net; Radivoj Kar, F6GNZ f6...@yahoo.com Envoyé le

[Dx4win] Re : IC735 remote control

was 8.  Changing LEN back to 7 solved the problem.  The Icom 735 now works fine with version 8.05. Best Regards;  Myrle,  K1HJC De : Radivoj Kar, F6GNZ f6...@yahoo.com À : DX4WIN Refelector dx4win@mailman.qth.net; supp...@dx4win.com supp...@dx4win.com; John

[Dx4win] IC735 control w. dx4win: test results

Hi, In the meantime, to check if my interface (home-made G3VGR/OK2WY design 2-transistor interface) was not the source of timeout, I have installed the DXLab software Commander v. 8.9.5 and selected IC735, 9600 kbps, 8N1, DTR high, RTS low and guess what: everything works superb! I can read

[Dx4win] IC735 remote control

Hi, Has anybody succeeded to make work correctly the IC735 with DX4WIN? My IC735 I want to use in my portable location permanently times-out, with all combinations of polling times and retries, using standard 1200bps and 04 address. Please respond to my Yahoo mail! 73, Radi F6GNZ

Re: [Dx4win] Reflector options

Hi Dick, Thank you for your expanations. 73,Radi F6GNZ --- En date de : Jeu 28.5.09, Dick Flanagan d...@k7vc.com a écrit : De: Dick Flanagan d...@k7vc.com Objet: Re: [Dx4win] Reflector options À: f6...@yahoo.com Cc: DX4WIN Refelector dx4win@mailman.qth.net Date: Jeudi 28 Mai 2009, 23h59

Re: [Dx4win] DX4WIN v.7.07.02 Help files inactive: SOLVED!

to Jim, Mel and Paul for suggestions and efforts to help me solve the issue. Best 73,Radi F6GNZ --- En date de : Ven 29.5.09, Mel ve...@videotron.ca a écrit : De: Mel ve...@videotron.ca Objet: Re: [Dx4win] DX4WIN v.7.05.04 Help files inactive À: Jim Reisert AD1C jjreis...@alum.mit.edu Cc: Radivoj

[Dx4win] Reflector options

to the Forum. 73, Radi F6GNZ __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help

<    1   2