Yes my K3/K144XV does the same. When it showed 181 MHz on the VFO A display
(after entering 145) ERR PL1 also appeared briefly on the VFO B display.
Then, after using the bandswitch to go to 2m the VFO A display started with
144.000 MHz but on subsequent visits to 2m via the bandswitch it
Ron relates getting an RF burn. I recall getting burn thru my finger
from a 432 MHz 5w tripler. I always attributed it to the 800vdc on
the plate but may actually have been RF. Poked a pin hole burn right
thru my finger (very painful for a couple weeks). I was more careful
handling live
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Further to my earlier posting, I have now got the new KAT500 connected to
the K3 and KPA500 as per the instructions.
Of course it did not work at all at first. However, I just got back from
dinner out with the XYL, checked again and found that I had reversed the
antenna/transceiver cables !!
Now
To either of you, what is your default sound card?
I ran into a similar problem while experimenting with Win8 - upon
boot-up, the radio would key several times. The SignaLink microphone
was the default mic input. I changed it to something else and that
problem disappeared.
73,
Joel - W4JBB
Disregard my previous email. Your situation is different than mine. In
my case, the SignaLink was keying, not the K3. In normal operation, I
let software key my K3 not the SLUSB.
73,
Joel - W4JBB
On 11/15/2012 6:09 AM, Mike Harris wrote:
My Dell Win7/64 box keys the K3 seven times in a
I was a Dayton orderer of the KAT-500 kit and last night got my email from
Madelyn. I plan on using the KAT-500's arrival as the driving factor to
finally redo my operating position - so, I've sort of appreciated the lag in
delivery, as that has postponed much work beyond assembling the tuner...
Don and all who helped
Diodes have been replaced. Everything is back to normal
Thanks
Ariel NY4G
Sent from my iPad
On Oct 31, 2012, at 11:02 PM, Don Wilhelm w3...@embarqmail.com wrote:
Ariel.
While it is sometimes possible to clip the leads on the top of the board and
use the
I wanted to take a moment to thank all who gave me great feedback on my SMD
question. Lots of great suggestions, web links and Youtube suggestions. I am
now able to tackle the SMD boogieman and I am hoping that these posts will
also assist others who come to the group with similar questions about
we can end this thread now...it has been stretched to it's limits.
that being said I can say that I have been a big fan of Elecraft since
it's creation. In my ham career of nearly 40 years I can say without a
doubt that this company is one of the best I have ever been involved
with. I simply
Hi Craig,
4.51 does have some problems decoding CW and the beta 4.58 is better.
Also, you want to be displaying VFO B and not the alternate display.
Cheers and 73,
Fred KE7X
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
I know the group has given you good suggestions and options for SMD soldering
but there is another route which is much better IMHO, but more expensive, of
course. Being able to solder SMD devices easily, togther with todays CAD
Tools, such as Eagle (free for small two-sided boards), makes
If you are using a serial cable for PTT (CONFIG:PTT-KEY), Windows
will pulse the DTR and RTS lines during the boot process.
73,
... Joe, W4TV
On 11/16/2012 5:54 AM, Joel Black wrote:
To either of you, what is your default sound card?
I ran into a similar problem while experimenting
Is there a utility that displays all the config info?
...so that ALL of the setting can be perused?
WW6L
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Sorry, Eagle is a Printed circuit design software. See cadsoftusa.com. You
can draw your circuit schematic and then create a PCB board layout. The
software will then produce the necessary files to send to a board house to
create the actual board. Within Eagle there is a very extensive library
We allow the FM filter to be use for AM transmit, now, but not for
ESSB transmit. The filter is too wide for this purpose.
73,
Wayne
N6KR
OK but this is not my problem. If I have the FM filter enabled for AM
transmit then ESSB transmission gives me a ERR TXF error when trying to
Before I hassle elecraft support maybe someone on
the list can come up with something.
Just put together a new K3 and I can´t get any mic
connection to the FP connector, i e no modulation.
It works ok from the rear connector.
I checked Config / Main and don´t seem to find any
errors. Is there
First $175 paypal to w...@gt.rr.com gets it. Pics available can email. No
manual but has mobil bracket mount seperation cable and control head mount.
Programming cable (serial port) Dtmf backlit microphone. Power cable with
anderson power poles.
John Cooper
409-499-6690
409-497-8033
Craig, Try tapping DISP again. If you tell the radio to display the
alternate data with the DISP control that is all you will see...no
decoded text will show.
On 11/15/12, Craig - AE6RR ae...@pacbell.net wrote:
I think that I have gotten my K3 in a funny mode somehow. It will not
display
G'day,
Checked out the CWT function with the latest beta 4r58 and all appears
to be back to normal (pre 4r51). Full range on the display and nicely
balanced about the centre point. It's been a while in the fixing but
it's been worth the wait. I cannot comment on the CW decoder, I don't
use
I just fixed this and will send you the new firmware to test. It
should be up on the web site later today.
Wayne
N6KR
On Nov 16, 2012, at 12:56 AM, Geoffrey Downs wrote:
Yes my K3/K144XV does the same. When it showed 181 MHz on the VFO A
display
(after entering 145) ERR PL1 also
When on MENU:MIC SEL , and with it set to FP.L or FP.H, tapping 2 should
toggle the bias on and off. 73, Guy.
On Fri, Nov 16, 2012 at 9:40 AM, Jan Erik Holm sm2...@bdtv.se wrote:
Before I hassle elecraft support maybe someone on
the list can come up with something.
Just put together a new
I recently built an 8-way hub for receiving antennas, using an
inexpensive Chinese made remote control switch.
The switch works fine - at least the controller in the shack actuates
the remote relays, but I'm quite suspicious of the actual RF performance.
Here's what I'm wondering - can I use
Hi Fred,
I have tried tapping the DISP key several times and tried with both alt data
and VFO B. The CWT indicator does not blink when I adjust the threshold
either, so it may be a decoding problem.
I am testing with a K3/0 and the remote rig boxes, getting ready to deploy
the main K3/100 to a
OK Guy,
Well if it works from the rear bias must be offor???
I have in CONFIG mic bnd off ( I think it was).
But will try this tapping 2
/Jim
---
On 2012-11-16 17:01, Guy Olinger K2AV wrote:
When on MENU:MIC SEL , and with it set to FP.L or FP.H, tapping 2
should toggle the bias
Jim,
The MIC SEL menu item is found in the main menu. The entry in the
CONFIG menu is MIC BTN which is for the :MIC BUTTONS - that is the up
and down buttons if they are present.
73,
Don W3FPR
On 11/16/2012 11:11 AM, Jan Erik Holm wrote:
OK Guy,
Well if it works from the rear bias must be
I am using a K3/0 and a K3/100 with the RemoteRig boxes. I have the
standard versions as sold at HRO not the ones with the special microphone
jumper module. I jumpered the mic connections as shown in the RemoteRig
manual on page 193 and I have horrible digital noise on my transmit audio
even
Maybe it is just me?? I had M1-M4 (Message buttons) programed for single
button band selection. After installing the Beta Firmware 4.58 all my
transverter frequencies above 6meters (222.1, 902.1, 10368.1) are messed up.
Even reloading good config does not resolve the single tap band change
Yes MIC BTNunderstand, it´s off anyway.
MIC SELyes I know.
I was looking in all menus for the bias since I was
thinking that it was the culprit but didn´t find it.
However since it works from the rear panel connector
and not the FP connector can it still be the bias?
/Jim
---
On
I have the sub receive and attached to it the general coverage receiver. I
cannot figure out how to band change and mode change on the sub receive and
tune the general coverage receiver to for instance 1070 AM the local news
radio. I listen now online but its clogged with adds. I have
Yes, their service and support remind me of the RL Drake Company
employees who were very helpful and had authority to mail new parts
without asking the boss.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Fri, 16 Nov 2012 07:13:18 -0500, Thom Durfee p...@priest.com
The KAT500 Serial Command Reference is now on our Elecraft Manual Download
page. Corrections directly to me, please.
http://www.elecraft.com/K2_Manual_Download_Page.htm#kat500
You may need to refresh your browser to see the update.
73 de Dick, K6KR
dick (at) elecraft.com
Hold the 1 button on the keypad for one second to toggle :b Set
David
KD4NUE
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of kis...@me.com
Sent: Friday, November 16, 2012 1:49 PM
To: elecraft@mailman.qth.net
Subject:
Will I get any useful information from this?
Yes. You will be able to measure isolation (on/off and port to
port) but not absolute levels or insertion loss.
Will the transformer affect the RF voltage as seen on the other
side of it.
Yes. Why don't you build up another transformer to
From time-to-time there are discussions here about purchasing oscilloscopes,
so thought I'd post this for my Elecraft friends who may be interested in
acquiring a high quality scope at a fair price.
I have for sale my mint condition Agilent DSO5034A oscilloscope, SN MY47150520.
This was
I just installed a KAT500 and a KPA500 (Merry Christmas to me). I installed
the auxiliary cables between K3 and tuner and amp. Coax and power to tuner
amp and rig. Now I'm in trouble. The manual and my brain don't connect.
Here's the problem. When I push tune on the KAT500 the auto light
On Fri, Nov 16, 2012 at 12:24 PM, Bob Woodward bobwoodw...@mac.com wrote:
I just installed a KAT500 and a KPA500 (Merry Christmas to me). I installed
the auxiliary cables between K3 and tuner and amp. Coax and power to tuner
amp and rig. Now I'm in trouble. The manual and my brain don't
You have not yet mentioned tapping 2 with MAIN:MIC SEL on to toggle the
bias. The bias for FP.x and the bias for rP.x are independent and set by
tapping 2 when you have either of them selected.
The bias on the front pin should toggle on and off with the menu display
going back and forth between
No. You could use a 6-meter transceiver (including the K3), or our new
XG50, which is a single-frequency TCXO.
73,
Wayne
N6KR
On Nov 16, 2012, at 12:32 PM, John Hendricks wrote:
Is the XG3 stable enough to be used for this procedure?
John Hendricks K7JLT
Just a battery update: I got the A123 26650 2400 mAh cells from Hobbyking
and they are indeed good quality new cells that test out at better than
rated capacity at a 3 amp discharge rate. These will make excellent long
life and safe battery packs.
Ive recently been made aware of another vendor
I recall that some posts ago, you said you have 5 volts on pin 1 of the
front mic jack. That fact alone says bias is set on for the front mic.
Go to the MAIN MENU : MIC SEL entry
Then select FP.x (x = H or L)
You will likely see bIAS in the display - Tap the 2 button to turn
it off.
Your
On your K3, go into CONFIG:TUN PWR and set the tune power to 25 watts.
The KAT500 takes about 20-25 watts to tune. Most of us had TUN PWR set
at 5W or close for the KAT3, and have forgotten about the setting.
73,
Fred K6DGW
- Northern California Contest Club
- CU in the 2013 Cal QSO Party 5-6
Sorry I didn´t. Yes I did do that and then bias turns on of course.
Thanks for the advice, I didn´t know about that command. I never
ever use bias with my microphones. In the first place I was
thinking maybe bias was on as default, this wasn´t the case with
my first K3. Indeed when tapping 2 BIAS
Jim,
Yes, I understand the language problem. Sorry that I cannot communicate
in your native tongue.
There is an independent bias setting for the each microphone jack.
Since your microphones do not require bias, make certain bias is set not
turned on (indicated by a blank in the MIC SEL menu)
Hi,
I have been considering for some time about buying a K3; however, given the
limited space and antenna constraints (have a simple 20M dipole about 30 feet
up) at our home in Palo Alto, I am not sure if I can put together a decent set
up worthy of week signal CW DXing or contesting. I am
I have two 4S1P sets of the battery packs from epbuddy.com for use with my
KX3. Initial testing and use suggests they seem to have full rated capacity
and work well.
JP
WF4Z
On Fri, Nov 16, 2012 at 4:23 PM, Chip Stratton c...@strattonfamily.uswrote:
Just a battery update: I got the A123
Hello Jay.
Before I got a vertical dipole, I used a 20 meter bazooka up 16 feet. I
worked all kinds of stations and a bunch of DX. I did this running 5 watts
and up to 25 watts. I have a K2, K3, and a KX3. They are great radios. It
goes without saying a better antenna is going to perform well,
Jay -
I have a K3/10 and operate at about 10 watts all of the time. I use an 10-40
meter inverted vee up about 30 feet from my QTH here in Salinas. I have had
many SSB contacts with this set up on all bands, but mostly on 10, 20, and 15
meters. The only problemI have had with DX is getting
I have AM filters in both main and sub receivers, and would like to have the
capability to work FM on 10m.
Is there anyone out there that has 2 of the 8-pole FM filters and would like
to swap for one an AM 8 -pole filter?
respond to kd4nue at arrl dot net
Thanks,
David
KD4NUE
On my previous message, I referenced 8 pole AM and FM filters, and I am not
sure such exists.
Let me reword it to want to trade an AM filter for a FM filter.
David
KD4NUE
__
Elecraft mailing list
Home:
Hi all,
I received the KAT500 yesterday and immediately installed it in my shack to
replace an MFJ switch and an MFJ manual tuner. Three ports is just ideal for
my 2 antenna cables and the dummy load. My ultimate goal is to have one of
these mounted remotely where my antennas come down to a
I have ordered the KXBC3 for my KX3 and hope to install it soon. I know
nothing
about rechargeable batteries, and would like some guidance. Will the KXBC3
handle
automatic charging of any batteries I put into the battery pack? Do I just run
up to
15 VDC into the KX3 power jack and it
Jay,
Why shoot yourself in the foot twice?
If you must have compromise antennas, that is one shot, and perhaps that
is unavoidable.
I ask why you would use a compromise transceiver with a compromise antenna.
The K3 will perform better than that compromise transceiver even with a
compromise
Hi Bob
It sounds as though you have made the same mistake as I did yesterday with
my new KAT500. In my case I got the co-ax cable wrong.
However, from the way you describe it, I think you have misconnected the
control cables. You need to remove the existing cable between the K3 and
KPA500 from
Lance,
The KXBC3 will not charge just any kind of battery - it must be of the
NiMH chemistry if you are to be successful.
.
There are many battery chemistry types out there - in the AA size, the
most common rechargable is the NiMH (Nickel Metal Hydride) is one of the
more common, and that is
The P3 has been...many thanks.
73, Joe W2KJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
OOPS!!!
The P3 has been sold...many thanks.
73, Joe W2KJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Attention KX3 users:
I have a new app in the Apple App Store that provides the complete KX3 Owner's
Manual in an application you can download to your iPhone or iPod Touch. Very
convenient way to have the Owner's Manual with you when you operate portable or
mobile. Check the following link for
I too found CWT spot on - pun intended. Accurate every time.
NR seems to make the signal a little raspier than I remember in the
past; haven't used it much in a few months but just happened to notice
it recently. Wonder if anything has changed. Then again, I've changed
antenna systems, have more
Hi again,
But there are bugs. Here is the first one I can reproduce 100%.
The setup is K3 and KAT500 only The aux cable is *not* connected and the the
utility is *not* running although the serial cable is connected. This is all
to keep things simple.
Steps to reproduce:
Select KAT500 mode to
I was going to add that the P3 is anything but a has-been. :)
matt W6NIA
On Fri, 16 Nov 2012 19:35:10 -0500, you wrote:
The P3 has been...many thanks.
73, Joe W2KJ
__
Elecraft mailing list
Home:
MNI TNX Don - As usual, very clearly stated and most helpful ;-) VY 73, Lance
On 11/17/2012 12:20 AM, Don Wilhelm wrote:
Lance,
The KXBC3 will not charge just any kind of battery - it must be of the
NiMH chemistry if you are to be successful.
.
There are many battery chemistry types out
On Fri, Nov 16, 2012 at 5:19 PM, ab2tc ab...@arrl.net wrote:
Hi again,
But there are bugs. Here is the first one I can reproduce 100%.
The setup is K3 and KAT500 only The aux cable is *not* connected and the the
utility is *not* running although the serial cable is connected. This is all
to
Sunday night is the Novermber 2012 edition of the Run For The Bacon. That
friendly lil' ol' QRP Sprint sponsored by your friends at the Flying Pigs QRP
Amateur Radio Club International. Join us for a spell to have some fun and to
say Hi to friends, old and new.
The time is the same as
“...But there are bugs. Here is the first one I can reproduce 100%”
You need to go into the Utility and set up the preferred antenna (or last used)
for each band.
Phil – AD5X
__
Elecraft mailing list
Home:
I've just recently set the K3 up with N1MM to do SSB. I'm using VOX and
N1MM F key recordings. During a practice SS QSO, I received reports of a
big echo in my transmitted audio. After listening closer, I, too, heard
the echo in the MON.
I've never had this problem. But, then, I've always
Do you have the line out of the K3 connected to the line in of the
sound card? If so, disconnect it, and see of the echo goes away. The
sound card may be passing the line in out through to line out, which
you're feeding the K3's line in - that would capture the monitor audio
and feed it back to
OK...I got this figured out.
I have SPLT SV set to on in the CONFIG/TECH MD menu.
As long as I change bands with the K3 and NOT by clicking on a spot in
the logging software, the K3 operates like it's supposed toNOT
turning off split and remembering the split setting by band.
However, if
This is great advice, Matt. A long while ago someone posted here that they were
annoyed that a replacement diode for their kit took too long to arrive from
Elecraft. (The customer had lost the original diode or something like that and
Elecraft sent him a new one without charging him for it.) I
Nothing changed with NR in beta 4.58.
73,
Eric
www.elecraft.com
_..._
On Nov 16, 2012, at 5:09 PM, Andrew Moore andrew.n...@gmail.com wrote:
I too found CWT spot on - pun intended. Accurate every time.
NR seems to make the signal a little raspier than I remember in the
past; haven't used
70 matches
Mail list logo