Richard,
Take a careful look at the Low Pass Filter board for the KXB3080
option. Count the turns. Each time the wire passes through the toroid
core is one turn. Make certain you have the correct number of turns.
That LPF is the downfall of many builders. In addition, count the turns
on
From: Richard [mailto:rich...@inparadise.us]
Sent: Saturday, January 16, 2016 8:50 PM
To: Elecraft@mailman.qth.net'
Subject: Low power KX1
I am very new to the world of CW. Several months ago I built a KX1. Once I
was able to receive with it, I built the 30-80 band set, and once it was
install
Announcing the 2016 Top Band Dinner at the Visalia IDXC April 15, 2016.
Craig Thompson, K9CT, will present: “Top Band from Palmyra, K5P.”
There will be a self-serve buffet dinner and door prizes.
Complete details and registration information can be found at
http://topbanddinner.jimdo.com
73! - St
On 1/16/2016 6:29 PM, Erik Basilier wrote:
In the absence of authoritative facts to the contrary, I can merely
speculate about most of the compatibility questions. It seems clear
to me that the roofing filters have not changed at all, and work the
same inboth radios.
Eric and Wayne have both s
The modular nature of the K3 is a wonderful thing, in that it allows the
hardware to be upgradeable. However, it does open up questions of
compatibility. When major specifications change, such as with the
introduction of the K3S, the potential for confusion increases. After
advertising my KRX3 with
Two videos cover the subject:
https://www.youtube.com/watch?v=CkSHtqxKj8o
https://www.youtube.com/watch?v=GqaYWdZ9BlM
73
Fred, AE6QL
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Doug
Turnbull
Sent: Saturday, January 16, 2016 1:31 PM
To: elecraft@
Thanks for the reply, I hope that it's the board, that way I can send in the
"broke" one and see if they can fix it cheaper than a new one. That way I would
be halfway to getting my K3 updated hi hi.
Anyway I got My dad's set up for him and he is tickled to have a good rig for
CW. He'll just us
I worked it with Howard from Elecraft and everything points to the board but
also wanted to run it through here to see if anyone else had a problem like
that. My K3 is an older one with the older Synthesizer boards so I can’t do any
“swaptronix” with the boards.
From: guyk...@gmail.com [mai
Dear OMs and Yls,
Elecraft is a sponsor so perhaps this off topic account of Palmyra
Island is of interest. EI6IL did some research on Palmyra and came up with
this link which gives an interesting account of dark happenings on Palmyra
Atoll.A read of this may add some spice to your hun
No, as long as the cable is well shielded and the connectors fit well.
Larry N8LP
On 1/16/2016 4:06 PM, elecraft-requ...@mailman.qth.net wrote:
Date: Fri, 15 Jan 2016 20:15:32 -0500
From: Bert Rollen
To:
Subject: [Elecraft] 75 ohm cable on Buffered I.F. Output?
Message-ID:
Content-Type: text/
The KRX3 is still available, and I am still trying to sell it in combination
with associated options, rather than making a lot of separate transactions.
Of course, I don't expect anyone to want every filter from my 2nd receiver,
so once the main pieces are sold, I expect some filters to become avai
I hope that you worked that problem through with Elecraft Tech Support on
the phone, particularly since there's the cost of a KSYN3A involved. Some
troubles have so much stuff floating around to sort through that it's just
plain difficult to work it via email.
73, Guy K2AV
On Sat, Jan 16, 2016 at
On 01/16/2016 09:51 AM, Bert Rollen wrote:
...
With renewed inspiration, I have dug several options out of my junk-box,
including some 6" & some 24" heliax jumpers. They are N-type, but I can
adapt.
Male N connectors fit perfectly into female BNCs. (Try it!) The only
downside is there is no
Thanks all for the replies.
With renewed inspiration, I have dug several options out of my junk-box,
including some 6" & some 24" heliax jumpers. They are N-type, but I can
adapt.
I also found a 8" LMR-400 jumper with BNCs on it, and a few other jumpers.
(I have wy to much crap around here)
Hello,
My Dad picked up a K3 that is a late number 9xxx it had a sub receiver and
both synthesizers are the KSYN3A. A little history on the rig first,
Original owner bought as 100 watt kit and installed the sub receiver. Second
owner installed a couple filters on the main board and the antenna
On Sat, Jan 16, 2016 at 7:58 AM, Hans J Rasmusen OZ7BQ
wrote:...
> The output and SWR green LED status indicators on my KX3 (sn 18xx)
> KXPA100/KXAT100 (sn 08xx) combo exhibit some unusual behavour on 40 Meters
> CW...
> The above problem appears to be RFI related, as the jumping output/SWR
> i
I downloaded the 11x14_Hershberger zip archive and ran the cessb.m script
through a fresh install of Octave 4.0.0 on a Windows box.
- I had to install the signal package (pkg install -forge signal)
- I have to load the signal package every time I start Octave (pkg load
signal)
- I had to comment
Someone on this list may have an answer.
The output and SWR green LED status indicators on my KX3 (sn 18xx)
KXPA100/KXAT100 (sn 08xx) combo exhibit some unusual behavour on 40 Meters CW.
The problem (if it is a problem) is present only on 40 Meters when running 80
Watts or more, at which point th
Olli,
this is more confusion to "the normal guy" than just pressing A/B once,
do the QSO, and get back with another A/B button press. I do it all the
time when SO2V'ing on different bands, works like a charme. We should
take care not to over complicate things on an already very feature rich
r
Hi All,
Yes, please be careful about feature upon feature making the menus a
nightmare. Thank God for a good manual and KE7X books to further keep us
straight. This is not really a radio one can operate without manuals.
Think of a ham who only has French and thankfully the K3 in not made in
Olli,
I think something like that would add confusion to the user interface.
In other words, you have a unique situation that is only applicable if
split is on a different band, but the display will not reflect the
status of the normal RX and TX parameters when in split.
73,
Don W3FPR
On 1/1
Hi elecraft team, hi list,
I'm thinking again on improvements for SO2V operation using a K3 with
sub RX.
In my opinion operating will be much smoother if TX on 2nd VFO is possible.
I do know it is technical not possible to transmit on the frequency of
the sub RX if it is on a different band.
22 matches
Mail list logo
