Compared to a 500 watt amplifier, 1500 watts represents almost 5 db. If
you don't know what 5 db can do when trying to make weak signal contacts
you haven't done much of it. I'm not saying that Elecraft should come
out with a 1500 watt amp, but amps are NOT just about being loud and
On Sat,7/30/2016 6:12 PM, Jim Miller wrote:
IMO the 1K5 amp market is a bit of a mess.
I'm pretty happy with my three Ten Tec Titans, first built in the early
80s. Designed by K4XU. All bought used for a combined cost of less than
$4,000. Two are in my SO2R setup, the third is a spare (T/R
When my KAT500 started acting strange I opened it up. There are two
thick, green insulated wires that cross each other on the PCB, and the
top one had sagged down and got close enough to the bottom one that it
had arced through the insulation. I'm guessing I had a less than
optimal match!
blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px
#715FFA solid !important; padding-left:1ex !important; background-color:white
!important; } Agreed, and I'd guess it was purely an economic decision.
Bob AA6VB
Sent from Yahoo Mail for iPhone
On Saturday, July 30,
I'm not so sure. Just the rumor of a big Elecraft amp had some people
(including me) quite interested. In fact, based on some of the pictures,
Elecraft had some interest in the past.
Amps are not evil and I also don't think they are incompatible -
technically or philosophically - with Elecraft. I
same here regarding the Elecraft SW
Tim A45wg
> On Jul 31, 2016, at 5:47 AM, Mike Markowski wrote:
>
> Yes, it is just as easy. I have no trouble using it for firmware updates,
> etc.
>
> 73,
> Mike ab3ap
>
> On 07/30/2016 09:38 PM, Bill wrote:
>> I am only interested
Yes, it is just as easy. I have no trouble using it for firmware
updates, etc.
73,
Mike ab3ap
On 07/30/2016 09:38 PM, Bill wrote:
I am only interested in how well the Elecraft provided software under
Linux works? I do not use any third party stuff at all. Is it as easy
and straight forward
I am only interested in how well the Elecraft provided software under
Linux works? I do not use any third party stuff at all. Is it as easy
and straight forward as their Windows software?
K3 Utility, KPA Utility, etc.
Bill W2BLC K-Line
Yes!
What exists works well. The selection is less than Windows, however. I
use hamlib/xlog/xdx and am happy in my simple world.
73 and enjoy,
Mike ab3ap, ubuntu distro (ex PDP11/70, VAX11/780, HP-UX, SGI, UNICOS,
Solaris, BSD, gentoo, ???)
On 07/30/2016 08:29 PM, Bill wrote:
I am
Around what serial number did the change from the nickel type pins to the gold
plated one? I’ve heard there was a problem running RTTY on the earlier models
with overheating causing trouble with the connectors.
__
Elecraft mailing
IMO the 1K5 amp market is a bit of a mess. I own a KPA500 and continue to
consider purchasing a legal limit amp. I'm not impressed by the offerings.
Most of amps that I've seen seem to be offered by unstable suppliers with
unstable supply chains. I'm not eager to plop down serious cash for
Sanity prevailed?:-)
Phil W7OX
On 7/30/16 5:53 PM, Dauer, Edward wrote:
Go to Google Images, enter KPA1500, see numerous images of both. Nice looking
equipment. I wonder what happened?
Ted, KN1CBR
--
Message: 30
Date: Sat, 30 Jul 2016 15:48:10 -0400
From:
Go to Google Images, enter KPA1500, see numerous images of both. Nice looking
equipment. I wonder what happened?
Ted, KN1CBR
--
Message: 30
Date: Sat, 30 Jul 2016 15:48:10 -0400
From: Scott Manthe
To: elecraft@mailman.qth.net
Subject: Re:
I was heartened to see Wayne’s response to this rumor. It seems inceivable
that Elecraft would offer such a product, much less one designed by someone
else. Big amps are about being loud, busting pileups, . When receivers were
less sensitive and sophisticated, e.g. digital filters, digital
I am switching from Windows to Linux (Mint) and am wondering if the K3
and other support software works as well on Linux as it does on Windows?
Advice/comments from Linux users will me most appreciated.
Bill W2BLC K-Line
__
Elecraft
Bret,
Actually you are comparing apples and oranges.
Any "in-line" DSP is an audio DSP processor, and it can only do
filtering and noise reduction functions at audio frequencies.
The KX2, being an SDR radio, does everything with DSP - modulation,
demodulation, all filtering as well as some
Great news. Think this is the first time I managed to contribute a solution to
this reflector. I've learned so much from everyone on here, and can say it
feels good to help someone out for a change.
73 Hope to work you on the air someday
KK4YEL
-Kevin
No trees were killed in the sending of
Sent From Sid Frissell's iPad
> On Jul 30, 2016, at 1:48 PM, elecraft-requ...@mailman.qth.net wrote:
>
> Send Elecraft mailing list submissions to
>elecraft@mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
>http://mailman.qth.net/mailman/listinfo/elecraft
Are you using VOX to trigger transmit? If so you might try different VOX GAIN
settings.
72,
Brian, K0DTJ
> On Jul 30, 2016, at 09:47, James Bennett wrote:
>
> I have a KX3 and am running FLDIGI 3.22.01 on my Raspberry Pi 3. Everything
> works… except for one annoying thing
For those who have been with a Elecraft KX2 longer than I (1st day), just
wondering how you might compare the KX2 DSP to a bhi Compact-in-Line DSP. I
have one for use with other rigs lacking DSP. I'll get to trying it with my
KX2, but I'm on the early learning curve end still. The KX2 is mighty
Ancient history, complete with myths and hanging chads.
Wayne
On Jul 29, 2016, at 7:28 PM, a...@juno.com wrote:
> Here are those pics:
> http://www.n6ie.com/Elecraft.html
>
> I'm thinking it's the next logical major item for Elecraft to offer.
>
> John AE5X
> http://ae5x.blogspot.com/
>
Thought I would report the solution, tried a different power supply to the
tuner.that was it.
Jack
W4GRJ
From: Jack Satterfield [mailto:j...@satterfield.org]
Sent: Saturday, July 30, 2016 7:15 AM
To: 'Elecraft@mailman.qth.net'
Subject: KAT500 cycling
I leave the KAT500 on 24/7,
Yes, from 2006. Two versions of the amp were on display at Dayton, the
KPA800 and KPA1500. Both were working prototypes and both were putting
out power, the KPA1500 at 1800+ watts continuously into a dummy load, if
I recall properly. Both were things of beauty and planted the Elecraft
seed in
Kevin, Kevin, Jack, & Dirk -
Thanks for all your helpful suggestions! And the winner is: Kevin Turned off
the “PTT via Hamlib command” and that cured the problem.
Very much appreciated. Now the rig and FLDIGI are MUCH easier to operate!
73, Jim / W6JHB
> On Saturday, Jul 30, 2016, at
I bet if you go turn off "PPT via Hamlib command," you will be good.
-Kevin (KK4YEL)
No trees were killed in the sending of this message. However, a large number of
electrons were terribly inconvenienced !
> On Jul 30, 2016, at 12:49, James Bennett wrote:
>
> I have a KX3 and
I'm only guessing here. fldigi has at least two methods of setting PTT on
rigs. One uses RigCat (CAT command for PTT) and the other uses Hardware
PTT. I don't know much about Hamlib, flrig or the other tabs.
Is it possible PTT is being set by more than one fldigi method and they are
I just received my KXPD2 yesterday and spent a while adjusting it to my
taste.
I am very pleased with its feel and quality and have to admit it was
worth the wait.
72 de Dave, W5SV
__
Elecraft mailing list
Home:
3. I would set the temp calibration back to where it was before shipping it
back to Elecraft.
Especially since it appears that is the only change you made before the loss
of power occurred.
--
View this message in context:
I have a KX3 and am running FLDIGI 3.22.01 on my Raspberry Pi 3. Everything
works… except for one annoying thing and I’m trying to find out if this is an
FLDIGI issue or something I need to tweak on the KX3.
When I fire off a macro such as a CQ message, the rig goes into transmit as it
should,
Hello,
There is a new release of Win4K3Suite. This release has improved SDRPlay
performance and it fixes an issue with the Elecraft Frequency Memory Editor
files.
Win4K3Suite is a full featured control program for the Elecraft K3-S, KX3, and
KX2. It can provide a software panadapter using
No I have it set to SO1V. I would really like to know what’s going on with N1MM
program with the KX2 and 3 with this program.
Jim K9TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Good advice - I picked up a small LiPo Battery Bag from Amazon.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX2-KXBT2-Charger-tp7617624p7620897.html
Sent from the Elecraft mailing list archive at Nabble.com.
One of the main failure modes of Li-Ion batteries is trying to charge a
defective battery ( puffed pack). When Li-Ion batteries begin to fail one
or more cells develop a high internal resistance and heat up during
charging. The 2hr warning is likely driven by the danger of trying to
charge a bad
All,
What specific chemistry are these batteries? Li-ion? LiPo? LiFePO4?
The three different types of lithium-based battery all have different ways
of 'looking after' them (I'm a heavy user of Lithium-based batteries, for
airsoft, portable radio and r/c...
I suspect the reason for the note
I put a battery in a steel pan out on the concrete patio and charged
overnight - the LED went Red to Green overnight and the battery was still
cool in the morning, so all went well.
The timer sounds like a good solution for indoor safe charging, but I'll
still do so in a pan on a patio block,
Let me build a K2, or other Elecraft kit for you. My prices are reasonable and
you have a new radio with the options you want.
73
Alan
W1HYV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I leave the KAT500 on 24/7, several years of perfect operation.
Today I sent the usual 15 watts tune carrier on 75 meters the tuner started
cycling
all lights on and off. Turned the tune carrier off but the tuner continued
to cycle.
Tuner will only turn off by removing power. Plug power back in
Joel and all:
The 80w amplifier I build is the Klitzing amp described, below.
I purchase the unpopulated pc board from Jim and order all other
components. I install them in Hammond enclosure with same heat sink
Jim recommends, plus a 120mm square fan controlled by a
thermistor-based ckt.
38 matches
Mail list logo