with K2/100.
Should I try this?
Thanks,
Chris
NQ8Z
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-KPA-ALC-problem-tp7581353p7581698.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft
OK, I'll give it try.
I've done that, using the DL2 and a DC voltmeter. Given the max is 30W, how
much of a difference between requested and measured power can there be (at
30W)?
Thanks,
Chris
NQ8Z
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-KPA-ALC-problem
into the
program. Most common cause is not having stereo input on sound card on
computer but iMic is stereo. I would check cable.
73 - Mike WA8BXN
---Original Message---
From: Chris Johnson
Date: 12/8/2013 7:01:29 PM
To: Elecraft Reflector
Subject: [Elecraft] HDSDR Mirrored
for the
documentation or purchasable cable to use the amp with band switching ALC on
the Yaesu.
Chris
K6OZY
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
I followed the guide on HDSDR's website for the KX3 and it IS working, but it
is odd vs all my other SDR radios. The RF seems mirrored on both sides of the
center DC spike. Is this normal?
I'm using an iMic with the RXIQ setup using the HDSDR KX3 guide exactly.
Tuning works great. Input
. I'm
getting a bipolar distribution of output power under Tune at a power set
level of 5w, with a display of either 4.4 or 6.4 W and nothing in between.
Chris
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-KPA-ALC-problem-tp7581353p7581475.html
Sent from the Elecraft
just add that when you live in noise hell, audio
distortion is so far down the problem list as to not be relevant.
73 Chris NW6V
--
Message: 7
Date: Thu, 5 Dec 2013 07:35:25 -0500
From: Dave Wank dhw...@hotmail.com
To: elecraft@mailman.qth.net elecraft
AT THE SAME GAIN
SETTINGS is fine.
???
Would an impedance mismatch between the K2 and the KPA (when on) change the
ALC response?
???
Thanks,
Chris
NQ8Z
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-KPA-ALC-problem-tp7581353p7581400.html
Sent from the Elecraft mailing list
Critical question: When I adjust the power level of the K2/KPA combination
between low (10W) and high (100W) power is the power measurement taken at
the same point for both levels?
Clearly, the RF level scale changes between the two settings. 10W is full
scale below 10W, 100W is full scale
or calibration was made with the upgrade. Since the upgrade
involved a lot of component changes, this could be the problem!
Would an incorrectly set KPA-100 power meter lead to the observed
differences in ALC response between low and high power settings?
Thanks,
Chris
--
View this message
me.)
Please let me know about the 1K in Q1 base mod.
Thanks,
Chris
NQ8X
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-KPA-ALC-problem-tp7581353p7581385.html
Sent from the Elecraft mailing list archive at Nabble.com
and the system
is well grounded.
Suggestions would be appreciated.
Chris
NQ8Z
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-KPA-ALC-problem-tp7581353.html
Sent from the Elecraft mailing list archive at Nabble.com
unnecessary, it's true; but
reassuring none-the-less. It's not a big deal to me one way or the
other.
But thanks for the reminder.
73 Chris NW6V
On Fri, Nov 29, 2013 at 1:58 PM, Robert Friess rfri...@usa.net wrote:
Chris,
You don't have to go to STBY and send a dit for a band change to avoid hot
Chris NW6V
On Thu, Nov 28, 2013 at 12:34 PM, George Rebong ke6t...@gmail.com wrote:
I would like to try this combination and wonder how many watts will I get
out in the KPA-500.
Happy Thanks Giving
73
George
Sent from my iPad 3G
you are up and running!
Chris
N6WM
From: elecraft-boun...@mailman.qth.net [elecraft-boun...@mailman.qth.net] On
Behalf Of Walt W0CP [w...@comcast.net]
Sent: Sunday, November 10, 2013 7:49 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3/0 to K3
the results of my measuring. Obviously none of these rigs are mass
produced and each builder may build his slightly different so verify before
attacking your case with a drill. Oh, and I could have made a mistake
use at your own risk. 73 de KK0G
Chris Ishmael
on my Mac but I wasn't quite
getting the hang of it. Going detailed step by detailed step following the
Spectrogram tutorial is what I needed and now I understand how it all works.
PS: My K2's filters are now aligned dead nuts perfect, thanks again everyone.
73 de KK0G
Chris Ishmael
On Nov 8
Does anyone know specifically where I can download Spectrogram? All the
downloads I find just lead to pop-ups to third party download sites with
unrelated garbage software. I can't even find Spectrogram's website, is it even
a current supported program?
Chris Ishmael KK0G
As far as I have been able to tell, this is an issue of the data display on the
K3/0. I have been using the system heavily in all modes of late, in fact I
have been remoting K6LRG as my primary station.
The K3 side is fine. it does not switch to cw mode. the symptop is that it
just displays
The DISP key sends the Y of X.YYY.ZZZ on the display. Is there a way to read
the X and ZZZ parts too? You can get it to send X.YYY by changing bands, but
I'd prefer to be able to get a full readout without changing bands. The KX1
reads both sides of the VFO freq when the band button is
Can I use a CAT5 coupler and cat 5 cable to extend the distance between the
two? I'd like to keep the amp where my KPA500 is in the other room while
operating from my laziboy. :)
__
Elecraft mailing list
Home:
Test, ignore please.
--
Best regards,
Chris Wilson.
mailto: ch...@chriswilson.tv
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Hi Wayne,
I'm sorry I missed Pacificon this year. This is great news. Can you tell us
if you stated any general ETA for preordering and availability?
On Oct 12, 2013, at 7:32 AM, Wayne Burdick n...@elecraft.com wrote:
Hi Dave,
The KX3-2M module occupies less than one cubic inch --
the next guy, so remember that they're
doing a job, and thank them for being careful :-)
73, Chris NW6V
On Oct 8, 2013, at 16:27 , Nicklas Johnson n...@n6ol.us wrote:
After my last trip, when I got hassled by the TSA about my wire stripper
(no tools longer than 7 inches, even ones
easier and
doable but was curious if pursuing this with the KX3/KXPA100 combo was on the
radar.
thanks
Chris
N6WM
From: elecraft-boun...@mailman.qth.net [elecraft-boun...@mailman.qth.net] On
Behalf Of Chris Tate - N6WM [ct...@ewnetinc.com]
Sent: Tuesday
Was wondering of the development status (if any) of the following remote
control possibilities
K3/0 (or K3 twin) KX3
KX3 K3
RRC KX3 interface?
Just wondering..
Chris
N6WM
__
Elecraft mailing list
Home: http://mailman.qth.net
guru kind of guy but would welcome any advice anyone
might be able to offer me please.
Very 73
Chris
M5LRO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
rx man - just
an idea and knowing Elecraft they would include some form of DSP / NR system
similar to the highly popular British BHI units.
Just an idea - please
73
Chris
M5LRO
__
Elecraft mailing list
Home: http
is to go into DM780 and select soundcard and then select the
input for the Signal Link input, that's the first port of call.
Hope it helps as a pointer
73
Chris
M5LRO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
I use the 6 meg ATT uverse plan to control my hilltop K-line using a K3/0.
Works great. Get as much bandwidth as you can afford. have heard some of
their earlier modems were not RF friendly, (QRN) but not an issue on the
control side.
~Chris
N6WM
From
...@acsalaska.net wrote:
Chris,
Where did you get the idea that the KX3 2M module output 1mw? Wayne has
repeatedly stated they expect something between 3 to 5w output. I know
nothing about the Flex6700 (does it run with 1mw output?). Most of the RF
modules used in radios require
I just discovered by accident that my KX3 will xmit out of the ham bands. Is
this able to be locked so I can't do that? I confirmed it was really
transmitting using another radio. I didn't try voice, just a CW tune by
accident.
I didn't ask to be taught how to operate. I didn't criticize that it CAN
transmit out of band, or that it was a bad thing. I understand the uses for
xmitting out of band. I asked if there was a feature to lock it into ham bands
that can be OPTIONALLY enabled.
Get off your high horse.
On
a larger amp, so between 1
and 5 watts, or even more. Does anyone have any good recommendations?
Chris
K6OZY
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
it down either, and
would be satisfied with band edge beeps. I have a blind ham that uses this
radio quite a bit, and it would be optimize his operation of the radio. He is
always having it announce VFO location because of the radio's openness to be
extra careful.
Chris
K6OZY
On Aug 19
interested in close in
rejection, without having to discern which side the intrusion is coming
from. Also I find anything below about 2KHz bandwidth too difficult to
discern.
Chris VK2ACD
__
Elecraft mailing list
Home: http://mailman.qth.net
efficiency comparisons, because we know its not more efficient doing it
this way. :)
Thx
-Chris
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Suppose the manufacturer can't or won't fix it? What happens then? I have a
Pioneer Elite plasma in my house that radiates plenty. Anyone have any
experience with Pioneer?
Chris
Sent from my iPad
On Jul 6, 2013, at 1:57 PM, Tom H Childers n...@n5ge.com wrote:
That is a plasma TV near
Has the CW UI been enabled yet? I have a friend who really needs it, just
like the KX1 did it.
On Aug 23, 2012, at 12:58 PM, Jim Kutsch jimkut...@yahoo.com wrote:
Wayne,
I'm one of those blind hams with a KX3 now that #1291 arrived at my QTH this
week. I want to publically thank you for
that little spring makes a Power Pole even better.
Seriously, if your Power Poles come apart when they shouldn't, you are
doing something wrong.
Chris
G5VZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
I'm considering what USB sound card to use for KX3 I/Q, for spectrum
display.
Interested in any recommendations. Anyone tried using Signalink USB?
Thanks, Chris VK2ACD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
the holders screws threaded all the way in, so
that the heads touch the board, and not suffer some shorting problem? I
think it would be OK, but would like informed opinion just in case.
Many thanks reflector people
Chris VK2ACD K2#3666, K3/10 #685, KX3#4559
I've found this noise on mine was mainly limited to the higher bands 10
6m. The RX SHFT set to 8.0 pretty much eliminates the noise, but if I
recall this also disables the roofing filter, which is a bit of a bummer.
72,
Chris KQ2RP
the Palm
Radio Pico Paddle most: that's ultimate, absolute joy as opposed to just
absolute joy making Morse with the KXPD3. That is, it's close. Being
able to use the Pico Paddle with other radios might just tilt the
balance though.
Hope this helps.
Chris
G5VZ / WG5VZ
On 17/06/2013 19:39
reading for some time about the great treatment owners receive from
Elecraft. (I got the free hat) and I look forward to a long relationship with
Elecraft.
My Orion will be up for sale shortly, along with a few other radios to lessen
the economic blow.
Regards,
Chris
k4...@mac.com
P.S. I'm keeping
I look forward to the K3 upgrades. I would never have the money to buy a K4.
This is what sold me on the K3 in the first place.
Just my input.
73's
Chris W7CTH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
but for the shack they are
da bomb.
~Chris
N6WM
From: elecraft-boun...@mailman.qth.net [elecraft-boun...@mailman.qth.net] On
Behalf Of Brian Hemmis [bhem...@mac.com]
Sent: Wednesday, June 05, 2013 12:03 PM
To: Jeff Drew
Cc: elecraft@mailman.qth.net
Subject: Re
Andy I just happened to wander through bestbuy and for 100 bucks the companion
2 model are the closest to the ones I have been using.
From: Andy McMullin [a...@rickham.net]
Sent: Wednesday, June 05, 2013 2:48 PM
To: Fred Smith
Cc: Ariel Jacala; Chris Tate
.
I had thought that spanning the two #5 pins might put a small, insignificant
bias on the audio out line. Not the case!
Chris
NQ8Z
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Connector-for-K2-Mic-Config-header-tp7573939p7574708.html
Sent from the Elecraft mailing
Greg, all,
I see his web site has now been updated and there are options for
international shipment - I was sure he'd told me he had sold to USA and
Canada in the recent past.
Chris
G5VZ / WG5VZ
On 01/06/2013 03:07, Greg wrote:
His website says UK sales ONLY.
On Fri, May 31, 2013 at 3:04
think Mark will ship worldwide.
Chris
G5VZ / WG5VZ
On 31/05/2013 22:44, Bill Blomgren wrote:
Exactly - Not sure what is going on with the commercial version's guy... I
suspect that is a side venture, and 'real work' probably has him tied up.
It's either that, or he doesn't want to fight
I also use HRD / DM780. It works fine for me. Initially, v6 was a little
shaky but they've smoothed it out pretty well. I use it more now than I did
with my FT-857D.
I hope Keith is right and they incorporate WSJT into it. I've been using
that mode a lot lately.
Chris
AB3QV
On Thu, May 23
10m) at times, but on 6m it seems like a substantial issue that
really hampers 6m use. Wondering if a fix is in the works?
72,
Chris
KQ2RP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Forgive me if this was previously shared.. Just curious about this interface..
IQ out Griffin IMIC Camera USB adapter Ipad ?? this would make a cool
field panadapter... maybe even with an Iphone.
~Chris
N6WM
From: elecraft-boun...@mailman.qth.net
Thanks Jeff. Ill hit up Amazon for the parts.. This is really worth giving a
whirl.. battery powered mini pan adapter with KX3.. very cool.
~C./N6WM
From: Jeff Ellis [driftenli...@gmail.com]
Sent: Wednesday, May 22, 2013 10:54 AM
To: Chris Tate - N6WM
Cc: e
on the
control board a la N6TQS, so the header connection needs to slip off.
Does anyone have a suggested part number, or, better yet, have one they
could spare?
Thanks,
Chris
NQ8Z
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Connector-for-K2-Mic-Config-header-tp7573939.html
Sent
I bought a $3500.00 hat at Dayton and they gave me a free K-3 ;-)
I also had it embroidered with my call.
I'm looking forward to receiving my free K-3!
Chris. k4win
Sent from my iPad
__
Elecraft mailing list
Home: http
Tee shirts and polos? I'm all in too!
Chris k4win
Sent from my iPad
On May 19, 2013, at 6:00 PM, Jim Lowman jmlow...@sbcglobal.net wrote:
I'd prefer a T-shirt to a polo, if you guys decide to get into the shirt
business. Cafepress probably could be helpful.
73 de Jim - AD6CW
On 5/14
I thought I would share this with a few of my friends in the DX club and
elecraft reflector.. that is quite a shot for 1/10th of a watt. Wkd fm K6LRG.
(remote K3/0 K3/100).
~C./N6WM
From: Chris Chapman [vk...@hotmail.com]
Sent: Friday, May 10, 2013 2
sees a normal SWR and I can
turn the KPA 500 off and continue to see a normal SWR.
This behavior is mildly annoying and doesn't seem right.
Can anyone shed some light on this?
73, Chris NW6V
__
Elecraft mailing list
Home: http
FWIW, I purchased one of these which seems to work OK.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=330911609563
72,
Chris
KQ2RP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
My KX3 had exactly the same issue when it arrived here. Shop-built. It
was returned for service and it turned out to be a bent pin on the
charger/clock option board.
Disappointing but quickly resolved.
Chris
G5VZ / WG5VZ
On 29/04/2013 18:44, BFritz wrote:
Hello folks,
Just got my new KX3
I'm thinking of buying a P3 and KXV3 board. I would be grateful for advice
from a UK amateur (with experience of this situation) on the pros and cons
of buying from the UK or the US.
73 de Chris, M0PSK
__
Elecraft mailing list
Home: http
for your Iphone/pad field day logger, take a look at an app called hamlog in
the app store. it may fit the bill. I beleive they even have an interface
available for the K/(x)3 that can be obtained.
From: elecraft-boun...@mailman.qth.net
New wife or firmware upgrade on the existing hardware?
Chris
G5VZ / WG5VZ
On 24/04/2013 21:09, Art Bross wrote:
Time for wife version 2.0.
My hobbies, her hobbies, our home.
Art
KC7GF
__
Elecraft mailing list
Home: http
be construed as
selling the product prior to receiving FCC approval.
So, yes, patience. Or as my dad put it: Patience is a virtue preached by
many and practiced by few.
73, Chris NW6V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
I bought a 60m add-on kit for my K2, but on reading the instructions, I
find it is incompatible with the N0SS amp keyer that I have fitted, in that
they both use the same socket. Has anyone found a way to have both
installed? Reply off the reflector OK, to acdmeag...@gmail.com. From Chris
VK2ACD
this is not a
duty-cycle question.
Thanks,
Chris
NQ8Z
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-SignalLink-Setting-gains-for-digital-modes-tp7572576.html
Sent from the Elecraft mailing list archive at Nabble.com
Thanks, Don!
I never knew quite what the ALC was for. Good point about the RTTY filter
set, too.
Chris
NQ8Z
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-SignalLink-Setting-gains-for-digital-modes-tp7572576p7572584.html
Sent from the Elecraft mailing list archive
. The sound card gains are
maximized just to take them out of the picture.
I don't always get comments about splattering, by the way. My fear is that
folks are to kind to point it out!
Chris,
NQ8Z
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-SignalLink-Setting
of the gain for a single ALC bar indication,
am I likely to be overloading? In other words, is a single ALC bar
acceptable if it's at the low end of the Tx gain setting?
I am going to 50% gain on both sound card levels.
Chris
NQ8Z
--
View this message in context:
http://elecraft.365791.n2
. No problem with that in
principle, however, will the correct band settings occur without the
high-current supply in place? There's no straight through connection around
the filters that I can see.
Chris
NQ8Z
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-KPA-KAT
immediately started
saying that it would have to be more expensive than Ten Tec. That's how
rumors start.
Elecraft publishes all current shipping estimates on their website. As for
price, I don't imagine you'll see anything legitimate until the actual
release announcement.
Chris
AB3QV
On Fri, Apr 5, 2013
I am only a casual SSB operator, The K3 is a great radio for anyone. Tech
support is the best. One of the great things about the K3, is that you don't
need to worry about next week the K4 will be out and 6 months
the K5 and so on. They keep making the K3 best with updates for everyone.
Chris
at a maximum of
38,400bps. That is a common serial top end. My prior FT-857D had three
choices, 4800, 9600, or 38400.
You aren't pushing volumes of data. This is a small file. What you are
experiencing is not normal. Look for other issues related to the computer
for the slowness.
Chris
AB3QV
for Windows users on the set-up.
http://freedv.org/tiki-index.php?page=Video+Microsoft+Windows+Quick+Start+Guide
There is a QSO Finder online to try to encourage people to use the mode:
qso.k7ve.org
Chris
AB3QV
__
Elecraft mailing list
Home
and with amazing
thoroughness.
Chris KA3EVT
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
I've been using a Tokyo High Power HL-45B and have been satisfied enough
with it. It's only 50 watts and it doesn't do automatic band switching with
the KX3 but the price point is well below where the Elecraft amp will
likely be announced.
Chris
AB3QV
On Wed, Mar 20, 2013 at 7:43 PM, Giff
I use a foot switch from a electronic piano (Keyboard)
Works great!
Chris W7CTH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
I suppose that if these days playing video games is considered a sport then
this hobby could be as well. I think that would have been a stretch in
1958.
Chris
AB3QV
On Wed, Mar 20, 2013 at 8:44 PM, Paul VanOveren p...@nf8j.com wrote:
The link is to a 1958 Sports Illustrated article, about Ham
*.
73, Chris KF6VCI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
without worry of qrn hi hi).
thanks~
Chris
N6WM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
I've had two hams offer to provide additional audio boards. I'll give their
calls here:
Dave G3TJP Two boards and components.
Kurt K0ARO One board with components.
Please contact them directly.
Chris
NQ8Z
--
View this message in context:
http://elecraft.365791.n2.nabble.com/W3PFR
Thanks all who responded... Appreciate all the feedback.. Thanks Dave for
checking this real time. I will likely try something like this.. Would be
great to hear an official Elecraft response as well... Eric? ;-)
73 and thanks again to the group
Chris
N6WM
Sent from my iPad
On Feb 26
I'm desperate for a W3PFR/N0SS audio output board for my beloved K2. Will
pay $30 plus shipping for the board, populated or unpopulated, new or used.
Thanks,
Chris
NQ8Z
--
View this message in context:
http://elecraft.365791.n2.nabble.com/W3PFR-N0SS-audio-output-board-for-K2-STILL-wanted
I was able to get a board, thanks.
I've had two requests for the board and 3 sellers contact me. Go right
ahead and reply to this thread if you want to buy or sell a board.
Thanks,
Chris
NQ8Z
--
View this message in context:
http://elecraft.365791.n2.nabble.com/W3PFR-N0SS-audio-output
One possibility is to use an attenuator. Elecraft sells one as a mini-module
kit.
73's
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
For those who want to use the KX3 /p and for whom every gramm counts,
could you comment on the original paddle vs I2RTF's Adventure paddle?
73, Chris KF6VCI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Hi All,
Can the KX3 be adjusted to an output power level less than 0.1 W - down to
milliwatt output levels?
Thanks again, KA3EVT
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I've tried direction connections, but find I'm getting feedback on the
higher bands.
Does anyone have an excess W3FPR/N0SS circuit board for the buffered K2
audio output? Will pay a reasonable price !
Chris
NQ0Z
--
View this message in context:
http://elecraft.365791.n2.nabble.com/W3PFR
I've only had my KX3 for a month. I tried for a week to make a contact
without success. I was really getting frustrated. As it turned out, I was
in PSK D mode rather than Data A. Once I figured out that mistake,
everything was fine after that.
Chris
AB3QV
On Fri, Jan 11, 2013 at 4:44 PM, w2b
Any recommendations for a whip antenna to use with a KX3?
Thanks much, in advance.
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Are you talking about the KX3? Voltage display information is in the
manual, page 22, left column, second item.
Here's my hint for the manual. Download the PDF version and use the find
function. Searching on voltage will get you there. It's more efficient than
thumbing through page by page. I
for another rig for /p operation and confess being tempted by
the variety out there. But now I
realize that true value means more than just a low sticker price!
Hope that Elecraft will offer built small rigs as well.
73 de Chris KF6VCI
It absolutely does. It makes me wish I had gone with a built rather than a
kit.
Chris
AB3QV
On Fri, Jan 4, 2013 at 6:43 PM, Ray Sills raysil...@verizon.net wrote:
That brings a lot of value added to the factor-built version. IMO, worth
the price, especially considering the number of hours
It's definitely still available. I bought one last week. I got mine from an
estate dealer (never used in the original sealed box) but HRO sells it as
well.
Chris
AB3QV
On Wed, Jan 2, 2013 at 2:32 PM, Alan Slusher aslus...@caribsurf.com wrote:
Robert:
If one is looking only
easy:
Solder a ground strap (I used a ground strap for desoldering), to the
ground connection of the microphone and connect it to the metal housing of
the microphone connector.
This solved all my problems.
You can find the whole story in the December issue on page 1280.Hope that
helps.
73,Chris
I read through the manual again, but couldn't find it. I'd like to be
able to send CW regardless of if I was in CW, or SSB, AM, FM. Is this
possible? Sometimes signals fade and I'd like to switch to CW instantly
without changing my receive.
Is this possible?
I would just like to share with everyone. When I did a upgrade to Mountain
Lion, my PL-2303 driver did not work. The only drivers that I found that worked
were from this web site.
http://changux.co/osx-installer-to-pl2303-serial-usb-on-osx-lio
Hope this helps anyone that may need this.
Chris
annoyed for some time trying to get an edit to take, I went to the macro
file and it was locked as read only. Changing that resolved the issues. The
macro file has been moved. It used to be in Program Files but it now in the
hidden directory Program Data.
Chris
AB3QV
401 - 500 of 989 matches
Mail list logo
