From: Howard K2HK ho...@hotmail.com
Date: June 6, 2014 at 1:30:27 PM
Subject:( K3)Can't interface Dx4win to K3
No response from Dx4win reflector so trying K3 reflector again. K3 does not
change frequency when using Dx4win 8.05. Simply times out when a spot is
selected. It had been working w
am using lp bridge and having trouble staying connected to dx4win
also. I stay connected just fine until i go split operation and then i
get a time out. Maybe it is the lpt bridge.
Bob
Bob Papa November
On 6/6/2014 12:07, Howard K2HK wrote:
From: Howard K2HK ho...@hotmail.com
On the road
Sent from my iPad
Begin forwarded message:
From: Howard K2HK ho...@hotmail.com
Date: June 2, 2014 at 1:30:27 PM
Subject:( K3)Can't interface Dx4win to K3
lost control of K3 when using Dx4win 8.05. It had been working w/o problem.
My setup: Win7 computer, native serial port
the pinout can contact me and I will pass it along.
73
Howard..K2HK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
The original post:
The serial cable that is shipped with the XG3 has managed to hide itself in my
cable jungle. It is clearly not the garden variety serial cable. Can anyone
describe it, diagram it or just tell me where I can replace it. I like my last
idea best :-).Howard..K2HK
Thank you all
The serial cable that is shipped with the XG3 has managed to hide itself in my
cable jungle. It is clearly not the garden variety serial cable. Can anyone
describe it, diagram it or just tell me where I can replace it. I like my last
idea best :-).Howard..K2HK
What type of container is it that houses the setup?Howard..K2HK
Date: Mon, 15 Apr 2013 10:56:22 -0700
From: ab...@arrl.net
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [KAT500] Remote Installation
Hi,
Sure, the wireless connection is using a Lantronix WiFi serial server. I
But how about operating remote?
Howard..K2HK
From: n...@elecraft.com
To: dstratt...@triad.rr.com
Date: Mon, 12 Mar 2012 14:01:56 -0700
CC: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX3 versatility
Couldn't have said it better myself :)
Thanks--
Wayne
N6KR
On Mar 12
My main RX looses audio when I turn on the sub rx. Before ripping things apart
I wonder if I am neglecting some simple setting. Howard..K2HK
__
Elecraft mailing list
Home: http
Thank you Gary. You hit it. Mix was bb. Glad you were listening :-)
73,Howard..K2HK
From: g...@isect.com
Subject: Re: [Elecraft] K3 Loss of main audio when sub turned on
Do you have the audio balance control set 100% to sub instead of, say, 50/50
sum main?
Or the config setting on b
UPS was hacked over the weekend and still off-line. Not sure if this is a cause.
Howard..K2HK
From: k4...@me.com
Date: Mon, 5 Sep 2011 10:39:18 -0400
To: elecraft@mailman.qth.net
Subject: [Elecraft] UPS Shipping options not available?
Happy Labor Day!
In anticipation
Is the following an urban legend or has it some validity? I do not subscribe to
CQ mag so can not confirm its appearance there. If true it would be a
cataclysmic blow to amateur radio.
Fellow Amateur Radio Operators, If you don't subscribe to CQ magazine, in the
April
Issue (pg 28) is an
Sorry for the panic lads. Wasn't thinking April in June. Just appeared in a
local radio club bulletin. Back to scratching out new rumors
__
Elecraft mailing list
Home:
problematical for me in the past
and was of some concern before I started. It turned out to be extremely easy
with no problems at all. If you have further questions the MH reflector may be
a good source, http://groups.yahoo.com/group/microHAM.
GL,
Howard..K2HK
From: sem...@semaos.plus.com
I assume Alan monitors the reflector :-). Hope he is sufficiently interested.
Howard..K2HK
Smith's:
Agreed, I concur with you. I don't need any more boxes on my desk either,
especially when a button on the Menu could turn off the RS-232 'mute' control..
seems like a pretty easy thing to do
and Happy Thanksgiving to all,
Howard..K2HK
Unless you change microphones or operators, transmit audio equalization
should be pretty much a set and forget type calibration.
I'm a little nervous about making this an official feature, because
the signal level is not well-controlled
I found checking and adjusting the K3 output on the P3 a useful function.
Would it be difficult to make it a front panel function w/o the need to reach
in the back and remove the RS232 cable?
Howard..K2HK
That's an easy fix. But I have so many boxes on my desktop and it would seem
more natural to me to be incorporated into the P3. Doesn't seem like it would
be a major project.
Howard..K2HK
Smith's wrote:
you could always use an A/B serial box and just switch to B when you want to
do your
bias. Checked with monitor and DVR.
73,
Howard..K2HK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
No Rick. Just post contest fatigue. Congrats on a FB job.
Howard..K2HK
Date: Mon, 19 Jul 2010 20:07:13 -0700
From: rta...@gmail.com
Uh, what you said! That's the second time I've translated positions into
metal incorrectly. Guess I'm just not the medal type...
/Rick
On 7/19/10, Bill
situation!
Howard..K2HK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Of course now that the cows have left I tagged the various voltages with
colored tape. An easy fix. But still need ideas for getting the K3 up again
aside from sending it to Elecraft.
Howard..K2HK
Date: Mon, 28 Jun 2010 12:35:59 -0400
From: k...@att.net
CC: elecraft@mailman.qth.net
I use similar arrangement. I follow K3 recommendation of no ALC which is
contrary to advice I received from THP. When using THP parameters I had
problems. Been ALC free 1yr plus.
Howard..K2HK
From: dpsa...@tx.rr.com
To: elecraft@mailman.qth.net
Date: Fri, 28 May 2010 10:55:54 -0500
Gary,
Not exactly ur situation but I have done it with a desktop. I do recommend a
hub with its own power supply. They are priced inexpensively.
Howard..K2HK
Date: Tue, 20 Apr 2010 15:26:51 -0700
From: gdsla...@yahoo.com
To: elecraft@mailman.qth.net
Subject: [Elecraft] multi port usb
When using the NB, if the IF blanker is enabled at any setting, I lose most of
the signal. The DSP blanker works as expected. What should I check?
Howard..K2HK
HK
__
Elecraft
When using the NB, if the IF blanker is enabled at any setting, I lose most of
the signal. The DSP blanker works as expected. What should I check?
Howard..K2HK
__
Elecraft mailing list
Home: http
Bill,
Array Solutions has them. I use that combo here.
Howard..K2HK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
When I apply a sig gen to the main antenna I get an S9 signal. Switching in the
Sub RX I get S9 from both Sub and Main RX. Now if I move the sig gen to the
auxillary RF input and switch to RX antenna I get a barely perceptible signal
from the Sub RX. Any ideas?
Howard..K2HK
.
HK
I especially like the Cleanup Macro but have added the step to return the
bandwidth to normal by adding SWH58; Now looks like: FT0;RT0;XT0;LN0;SB0;SWH58;
Howard..K2HK
HK
__
Elecraft
of
downloading I agree it might be easier but hardly a brain teaser after you have
done it a few times. Let the Beta roll on
Howard..K2HK
HK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
should be a
generation away.
Howard..K2HK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
What I have I changed? I can only hear my external speakers when sub is
activated. Config settings: speakers=2; phone +speakers = yes. Plugged into
rear spkr jack. With plug removed internal speakers work as expected.
Howard..K2HK
HK
Allan,
My Tokyo Hypower interfaces with the K3 like bread and butter. Impressive
combo. If you can pull it off it is worth it.
Howard..K2HK
snip:
I am currently using a Tentec Hercules II amp with my K3. I would like
to check out options for a solid state amp of
1000W or more
in warrantee. The
amp does have built in protection so perhaps this a case of suspenders and a
belt.
Howard..K2HK
Jim Brown, K9YC wrote:
It is VERY rare for a modern power amp to REQUIRE ALC. The proper way to
drive an amp is to use the transceiver's power control to set
. Unfortunately it means
taking the radio out of line which requires time that is hard to come by these
days. I'll get to it and post my result when done.
73,
Howard...K2HK
Don wrote:
Howard, You are correct, with nothing connected to the K3 EXT ALC connection,
there should be no power
have set for
15 watts I get only 1-2 watts out. This occurs regardless of whether I am
connected to the amplifier or not. The SWR is between 1.2and 1.5. I do have the
mod installed.
Ideas needed.
Howard..K2HK
__
Elecraft
until about 60 watts then cuts back. In the tune position which
I have set for 15 watts I get only 1-2 watts out. This occurs regardless
of whether I am connected to the amplifier or not. The SWR is between
1.2and 1.5. I do have the mod installed.
Ideas needed.
Howard..K2HK
ALC output to
control the power output of the K3 is bad practice and is likely to
produce distorted signals and splatter.
73,
Don W3FPR
Howard K2HK wrote:
I am having a problem with the external ALC. I am trying a new amp that
requires ALC feedback. When I set it in the config menu regardless
of the backbone providers, eh?
Jeff N6GQ
I guess the Supervisors in San Luis Obispo should be made aware of this due to
their restricions against amateur transmitters.
Howard..K2HK
__
Elecraft mailing list
Home: http
Thanks Ian. I am one of those taken in. Just sent to me today by a trusted
friend. Pheww
Howard..K2HK
HK
Date: Fri, 10 Apr 2009 10:54:40 -0700
From: a...@dseven.org
To: k...@arrl.net
CC: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft's website down
Howard K2HK
be
indicated? What are the differences?
Howard..K2HK
HK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Has anyone had this problem? Frequently when I first power up the K3 the
display appears but no audio and no TX output. Shutting down and restarting it
operates as normal.Howard..K2HK___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
After sending the msg below I removed the KRX3 and also reinstalled the 2.7
filter whose position had been moved on the RF board. Neither of these made any
difference. KRX3 works as expected, CW works as usual but..no audio output
on SSB. Howard..K2HK
HKNo TX audioDate: Sat, 6 Dec 2008 18
with an answer soon it
looks like I will lose lots of time when I return to Aptos.
73,
Howard..K2HK
HK
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]; [EMAIL PROTECTED]: RE: [Elecraft]
Update and another request Lost SSB after KRX3 install..Ideas?Date: Sun, 7 Dec
2008 08:03:32 -0800
Have you
Barry N1EU wrote:
Howard..K2HK wrote:
After sending the msg below I removed the KRX3 and also reinstalled the
2.7 filter whose position had been moved on the RF board. Neither of
these made any difference. KRX3 works as expected, CW works as usual
but..no audio output on SSB
Barry N1EU wrote:
Howard..K2HK wrote:
After sending the msg below I removed the KRX3 and also reinstalled the
2.7 filter whose position had been moved on the RF board. Neither of
these made any difference. KRX3 works as expected, CW works as usual
but..no audio output on SSB
and tx but will get
it in the AM. Thanks for all the suggestions which allowed me to eliminate
several possibilities. This was not expected since I didn't get my big hands in
that area.
73, Howard..K2HK
___
Elecraft mailing list
Post to: Elecraft
47 matches
Mail list logo
