e 2019, and had the following performed (amongst
other fixes and updates):
"Replaced Q5, D7, R3, R9 and R24 for Transmit/Receive MOD (Improves
robustness in Transmit/Receive circuitry)."
Good luck getting a response from Elecraft support now. A
ther than this, Commander is working fine.
>
> User -defined Command Sequence:
> Note: Power Off
> Command:PS0;
Try the following:
'PS0;
ASCII commands must be prefixed with a single-quote - see
https://www.dxlabsuite.com/commander/Hel
s like its connection to the RRC box is TTL, not
RS232, so to connect that to a K3 directly might require a level
converter interface.
73,
~iain / N6ML
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
On my early model, the interlock switch is actuated by an assembly
including a 13mm 4-40 standoff (and some other hardware), which is
attached to the inside of the top cover. I'll attempt to send you the
old (rev C) assembly manual off-list.
73,
~iain / N6ML
On Sun, May 3, 2020 at 1:
Port Redirector software, TruPort®
technology enables Windows-based applications to access and control
serial ports on the UDS2100 as if they were actually local PC serial
ports."
So you need to install that (Com Port Redirector software) on your
Windows PC. It appears to be available at:
https
ernate VFO encoder or one of it’s
> connections.
>
> Opinions? Seems to me a visit back to the mothership.
... or try to diagnose and fix it yourself. The VFO A and B encoders
are the same, so you could swap them to determine if it's the e
ad this repair done lately? I just wondered what the cost is to
> repair if anyone knows.
Minimum $95 (one hour), plus parts and any additional labour. Waiting
to find out
73/GL,
~iain / N6ML
__
Elecraft mailing list
Home:
I bought E0421 (new from Elecraft) in late 2008. It got some light
use, but has spent most of its life in its box. It's available for
sale if anyone's interested.
73,
~iain / N6ML
On Sun, Oct 6, 2019 at 6:54 PM James F. Boehner MD via Elecraft
wrote:
>
> I wanted to than
t the TX Inhibit and the Remote Power On features share the
> same ACC pin 7 and are mutually exclusive, has anyone found a way to
> have both abilities simultaneously ?
Use pin 8 to power on remotely. Pin 7 can be an *output* that
indicates when power is on, or an input for TX I
his
one makes it more difficult to be patient with
73,
~iain / N6ML
On Tue, Apr 3, 2018 at 6:31 PM, Michael Walker wrote:
> This is too funny.
>
> Guys, relax. I'm sure they are working their butts off to get the amps out
> as quickly as possible and as QA'd as possibl
sist ;)
73,
~iain / N6ML
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help s
Comparison: https://pasteboard.co/HcSCnnK.jpg
Yeah. I'm due for a new CM500. I thought I'd try the SB45, but don't
really like it :/
73,
~iain / N6ML
On Tue, Mar 20, 2018 at 10:29 PM, iain macdonnell - N6ML
wrote:
> Depends how big your ears are, I suppose... but fo
Depends how big your ears are, I suppose... but for me, the CM500 is
more comfortable - the SB45 opening is quite a bit smaller, and
pinches my ears a bit. I also like the mesh band (CM500) better than
the squishy one (SB45)... but I'm not bald... yet
73,
~iain / N6ML
On Tue, M
On Fri, Mar 16, 2018 at 11:47 AM, Wes Stewart wrote:
> I've never understood why a three-dimensional object is called "2D".
Presumably because they *fasten* in two dimensions (there are no
threaded holes in the ends of the blocks).
73,
~iain / N6ML
> On 3/16/2018
I guess "3-4 weeks" has become "2-3 weeks" (since 5 weeks ago). so
maybe if we substitute "months" for "weeks" we'll get something more
realistic :/
I still think that each time-relative statement on that page should
include an individual timest
That was was the status on Feb 6th, though:
http://elecraft.365791.n2.nabble.com/KPA1500-ordered-8-24-td7638005.html#a7638028
So I'm failing to see an update
73,
~iain / N6ML
On Thu, Mar 15, 2018 at 1:39 PM, Dennis Moore wrote:
> There is a date at the top of the page, Ma
Ugh! I hope you didn't blow anything by shorting pins together with
the shield of the USB plug!
73,
~iain / N6ML
On Thu, Mar 15, 2018 at 1:18 PM, Michael Blake wrote:
> I am not sure how many of you have noticed the warnings in the K3s and P3
> manual to NOT plug a USB B con
those orders over the next 2-3 weeks."
could be accompanied by the date on which they were posted... it seems
like that was the status about a month ago :/ I wonder if the update
didn't get pushed, or maybe there's caching somewhere. It's not in my
browser.
73,
~iain / N6ML
Or http://www.elecraft.com/elecraft_shipping_status.htm
73,
~iain / N6ML
On Thu, Mar 15, 2018 at 12:49 PM, Eric Swartz - WA6HHQ, Elecraft
wrote:
> We are working hard and have just updated the KPA1500 shipping status as of
> today 3/15.
>
> see: http://
ntinues to read fine and power output is also fine.
> Any suggestions on what might be wrong?
Happened to mine years ago. T/R PIN diode failure was suspected. A
replacement RF module fixed it.
GL/73,
~iain / N6ML
__
t came up with
> either bad connector seating or circuit breaker issues, neither which seem to
> be the case.
http://www.elecraft.com/manual/E740182%20KPA3CONMDKT%20Instruction%20Manual.pdf
73,
~iain / N6ML
__
Elecraft mailing
OM-port for keying. This works fine
for some, but others have issues with timing (it's dependent on
Windows and the COM port operating smoothly). The WinKeyer is very
well regarded amongst contesters, and will generally provide the most
dependable operation.
73,
h) to set the "T=" level (TX monitor). Tap
'2' again to return to the RX LINE OUT setting."
73,
~iain / N6ML
[1] ftp://ftp.elecraft.com/K3/firmware/hfwnotes.rtf
__
Elecraft mailing list
Home: http://mailman.qt
gt; below 1.1 KHz (at least for a 2.8 KHz filter).
>
> This must be some "Per Band" feature that I am not understanding.
Are you in the right sub-mode? (hold the "DATA MD" (AFX) button, then
make sure you're in "DATA A")
73,
~iain / N6ML
__
the Config menu of the K3/0-Mini.
> In that case the K3/0-Mini's USB port could be configured by the user for
> either Remoterig hardware or software RemoteHams.com and it would be easy
> to switch.
But it'd have to be electrically switched inside, and I suspect that
such sw
al
73,
~iain / N6ML
On Wed, Feb 15, 2017 at 9:57 AM, Jim Larson wrote:
> It sure would be awesome if a user could put the internal K3s keyer into a
> Winkeyer emulation mode. The majority of logging software supports K1EL's
> command set, but not all support the Elecr
on, it's an output problem. If it doesn't, it might be an
issue of insufficient audio input for SSB modulation. (AFAIK) the K3
will automatically boost the audio input if it detects that there's
not enough (a feature that I'm not particularly fond of).
73,
~iain / N6M
rting an error. Suggestions anyone?
You seem to be getting confused between KAT500 and KPA500. The current
KPA500 firmware is 1.47.
73,
~iain / N6ML
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecra
("telnet" interface) WTI Network Power Switch that I
rescued from a recycle pile. Digital Loggers Inc make a
good/inexpensive "Web Power Switch".
For powering-on the K3 via ACC pin 8, I use a RS232 port on an onsite
PC, with the same simple circuit used for FSK k
ot really critical).
The baud rate should be set to match the K3's CONFIG:RS232 setting.
RTS and DTR should be set to "Off".
73,
~iain / N6ML
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/ele
COM ports. If you have access
to another PC, you might try the K3 Utility there.
73,
~iain / N6ML
On Fri, Sep 9, 2016 at 3:16 PM, Jeff Griffin wrote:
> I just got back down here where the K3/0 is located. So Iain, your saying I
> should be able to talk to the K3/0 with the K
same thing, but only when there is nothing plugged in.
The schematic shows a switch connected to (unused) pin 4.
A simpler test might be to use a stereo audio cable, plugged into ACC1
- measure between the tip and ring at the other end. I see a few
M-ohms there in both directions
most sounds like the TX and RX lines might be shorted together??
But if this only happens when the cable is connect to the KX3, perhaps
the short is inside. When you type "ID;", does it echo back one
character at a time, or the
ell you if the problem is
with the COM port plumbing or the DXLab Suite config.
73,
~iain / N6ML
> On 9/3/2016 10:03 AM, Jeff Griffin wrote:
>>
>> I'm at FTDI 2.12.18.0,
>> I think this is the right level. There are no errors reported in any of
>> the
>
Seems like an issue with the "BCD" data from the K3 to the KPA500, but
the symptoms don't seem to point to a single broken wire.
It may be an obscure firmware bug. What happens if you take 30m back
out of the band-map? Is the K3 firmware up-to-date?
73,
~iain / N6ML
On S
ield-test-firmware-new-PSK63-mode-changes-related-to-KAT500-amp-K3-0-mini-td7593869.html
Do you have something connected to AUX on the K3, that might be
pulling down the AUXBUS line?
73,
~iain / N6ML
__
Elecraft mailing list
Home
On Sun, Jul 24, 2016 at 1:39 PM, george allen wrote:
> Wondering if I can use my KX3 for remote operation?
AFAIK this is still valid...
https://www.mail-archive.com/elecraft@mailman.qth.net/msg145357.html
73,
~iain / N
hing else available for purchase from
Elecraft, but there may be "aftermarket options" like:
http://www.qsl.net/w9wis/sewdivine/Elecraft_Shirts.html
73,
~iain / N6ML
__
Elecraft mailing list
Home: http://mailman.qth.net/m
quot;[KX3]" (or something along those lines). The full set of topics is
at:
http://elecraft.365791.n2.nabble.com/Elecraft-f365791.standard.html
73,
~iain / N6ML
On Thu, Sep 10, 2015 at 11:03 AM, Jose Rivera wrote:
> This 'reflector' or listserve is ok, but not ideal for readi
1MM+.
Is it possible that you have a macro associated with one of the memory
buttons('s programmable function), which sets the MIC gain, and one of
your lesser-used N1MM Logger messages is virtually pushing that button
(SWT/SWH)?
73,
~iain / N6ML
probably could sell your K3/0 and buy a K3 kit
to build (and not be left with useless PCBs). Personally I prefer the
form-factor of the "full size" K3 over the "mini", and I believe I'm
not alone, so there's probably a market for y
re
interface of some sort (could be as simple as a couple of transistors
and resistors to level-convert between a RS232 port and the K3's PTT
and FSK inputs.
Whether or not FSK is better than AFSK is somewhat of a religious debate..
73,
~iain / N6ML
On Mon, Mar 30, 2015 at 11:56
ad of negative, due to the IF being reversed on the K3
above 30MHz (or so). Not sure why you would be seeing different
behaviour on the lower bands.
73,
~iain / N6ML
On Wed, Feb 4, 2015 at 2:37 PM, Pete Smith N4ZR wrote:
> Update - I don't understand how or why, but if I set CW Skimme
"KPA500 Remote" might work for you - not sure if it has a "local" mode
(I've never used it), but I suppose you could run server and client on
the same PC if you had to
http://www.elecraft.com/k2_remote.htm#k3remote
73,
~iain / N6ML
On Fri, Jan 23, 2015
get 192kHz with 16-bit samples, I think that adds up
to 6Mbps. I suspect that not many remote sites have that sort of
upstream b/w available
73,
~iain / N6ML
On Wed, Jan 14, 2015 at 5:19 AM, wrote:
> Sorry for my confusion, I was thinking IQ as the usable form of IF at the
> contr
s
you could with the original K3/0. Perhaps you could build a
level-converter and make it work - I don't know if it's that simple or
not. It'd be a rather expensive "upgrade" anyway.
73,
~iain / N6ML
On Wed, Jan 14, 2015 at 9:39 AM, W2BLC wrote:
> Does that me
on to the ring of the line out jack -
even without the sub RX, it will become active if "CONFIG:LIN
OUT=PHOnES"... or at least it gets the main RX audio when the sub is
inactive in that case.
73,
~iain / N6ML
___
ed any light on what I am missing here?
73, Iain M0PCB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http:
to whatever those pots are
physically set to - notably turning on or off the sub-receiver. It's
rather annoying when trying to work a weak DXpedition running split on
SSB, and I/we need to bug Wayne about this again :)
73,
~iain / N6ML
__
ecause it makes
the noise louder - it's because it raises the signals (from the
antenna) above the receiver's internal noise.
73,
~iain / N6ML
On Fri, Sep 5, 2014 at 1:54 PM, Dauer, Edward wrote:
> Aware as I am that the word ³data² is not the plural of the word
> ³anecdote,²
nnect the antenna, a preamp isn't going to do much for
you
73,
~iain / N6ML
On Fri, Sep 5, 2014 at 5:14 AM, Brian wrote:
> Quite some time ago there was a discussion that adding a preamp at the K3
> antenna terminals couldn't possibly help. The argument is that i
t
> could screw between connectors and also a source for a little bag of them.
Pan Pacific calls them "barrel nuts" (p/n H-BN-P10)
73,
~iain / N6ML
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listin
t; desktop.
You can do that with one speaker - just set CONFIG:SPKRS=1
73,
~iain / N6ML
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@m
rface issues to which I referred
> earlier in this thread. DATA A and AFSK A/FSK D need separate default
> bandwidth (2.8 or 4 KHz for DATA A, 500 Hz for AFSK A/FSK D) and the
> last used BW/FC values need to be stored per sub-mode/band.
+1
73,
~iain / N6ML
> On 2014-08-18 10:10 AM, Ia
time.
73,
~iain / N6ML
On Fri, Aug 15, 2014 at 9:52 AM, Mike Reublin wrote:
> Is it possible you have confused PTT and VOX? I can't imagine VOX being
> controlled by a foot switch.
>
> 73, Mike NF4L
>
> On Aug 15, 2014, at 12:40 PM, KB7WVB wrote:
>
>> I
I've not used them myself, but Grainger is usually recommended for
stuff like that...
http://www.grainger.com/category/copper-blanks-flats-bars-plates-and-sheet-stock/copper/raw-materials/ecatalog/N-c0w?bc=y
73,
~iain / N6ML
On Wed, Jul 30, 2014 at 12:37 PM, Brian F. Wruble wrote:
nals with a narrow filter engaged - if
there's any significant latency, you've already tuned past the signal
before you hear it. It's a tricky problem area. My personal software
solution uses UDP and a moderately-sized buffer, and when the buffer
builds up to a point where the latency is mo
he same for the preamp if I want it on/off.
Theoretically, the K3 could convey RX ANT status to the KRC2 over
AUXBUS, and the KRC2 could drive some outputs based on that, but
(AFAIK) that is not implemented in either firmware.
73,
~iain / N6ML
_
uestion; the channel frequencies for
CW and USB are listed at:
http://www.arrl.org/news/new-60-meter-privileges-now-in-effect
and should be used exactly as listed there for CW and USB modes on the K3.
73,
~iain / N6ML
> On 6/22/2014 5:32 PM, Bob Myers wrote:
>>
>> To our K3 60-Meter
ause rfi
probs, but then I only run 100W.
Iain G4SGX
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mai
than about 2W. If you don't have the KXV3, there's another PIN diode
on the main RF board that can be vulnerable. I'll forward you an email
from support when this happened to me a while ago
73,
~iain / N6ML
On Sat, May 10, 2014 at 3:04 PM, Jeff Stai wrote:
> On Sat, M
Wayne,
This is very interesting (and great) news. I shall take this opportunity to
express my interest in the 4m module, and have tipped off another local
amateur I know who also would be very keen for such a beastie.
Many thanks & 73,
Iain M
l still controls the AF gain, however the loudness I like
> it at moves around if I adjust it.
Seems like a stupid question, but I have to ask are you sure it's
not just that the knob is loose?
73,
~iain / N6ML
__
Elec
20W as
>passing through (on it's 'power' display.)
>
> I've verified that the amp's RADIO option is set to 'K3'.
>
> Does anyone have any ideas?
What happens if you connect the K3 directly to the KPA500 (i.e. remove
the KAT500 from the picture, temp
where
(at least sometimes) the bias is delivered on the ring instead of the
tip. I actually find that the CM500 audio is hotter when bias is
turned OFF in the KX3.
73,
~iain / N6ML
__
Elecraft mailing list
Home: http://mailman.qth.n
unno ;)
> 3 - The sidetone on CW is generated by the RRC unit, so it might be a
> question for them -- is there a way to adjust the pitch? Mine is at about
> 750 Hz, way too high for me.
There should be a "Side tone hz" setting on t
remember I may
have had it mobile once or twice.
All makes perfect sense now!
73 Iain
G4SGX
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
__
Elecraft mailing list
suspect a failing component
under stress, hopefully coax or balun and not a PA component..
Time will tell, thanks for your advice.
73 Iain G4SGX
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
.
On a 20 second TX it rose to about 26 Amps (!) and the Hi Curr error
message came up on screen.
The rig USED to be OK for extended periods of RTTY.
I have not tried on any other bands.
Can anyone explain this behaviour?
Iain G4SGX
---
This email is free from viruses and malware because
ng).
Wikipedia (which knows everything, right?) seems to concur...
http://en.wikipedia.org/wiki/Phone_connector_(audio)
73,
~iain / N6ML
On Tue, Apr 8, 2014 at 9:56 AM, Josh Fiden wrote:
> I'm curious about this. If anyone has reference to an actual 1/8" connector,
> p
Are you using a USB/Serial adapter? If you have another one of a
different type, or a "real" COM port, you might try them instead
73/GL,
~iain / N6ML
On Mon, Mar 31, 2014 at 2:17 PM, Bill Coleman wrote:
> I noticed this weekend that Elecraft had updated the firmware (n
er the serial
connection to the remote K3.
> Not sure about RS-232 vs. TTL here, too. Let's see if Elecraft shines in.
> But what's sure if you want to use the K3/0 mini locally, i.e. without the
> RRC's, you'll have to
It'd be interesting to see a pin-out for the 15-pin connector on the
back of the K3/0-Mini.
73,
~iain / N6ML
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.
ros&structure=N1MM+Logger+Documentation
73,
~iain / N6ML
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: ht
how long) that character
is until the operator has finished keying it.
Setting the client to a significantly higher speed than the server
doesn't seem practical, and still doesn't really solve the problem -
the difference in speed would have to be huge to make a zero no longer
than an &#
3). I was worried that it was
something inside the K3 that was failing, but after I replaced both
the WinKeyer and the cable connecting it to the K3, it's been 100%
fine since. I still don't know if it was the WinKeyer or the cable
that was causing the problem, but didn't want to have
our thoughts will be greatly apreciated to relieve a somewhat
> tired brain !!.
The P3 connects to the laptop's serial port, and the K3 connects to
the P3. This is covered on page 13 of the P3 Owner's Manual.
73,
~iain / N6ML
__
The Plantronics headset is normally inserted in the cord between the
telephone and its handset, which does use all 4 wires, like this:
http://en.wikipedia.org/wiki/File:RJ9_Handset_diagram.svg
Don't know about impedance/level-matching with the K3
73,
~iain / N6ML
On Wed, Mar 5,
On Tue, Mar 4, 2014 at 6:51 AM, Matt Zilmer wrote:
> If you're using external sound for your data modes, you should have
> the mode set to DATA A, not AFSK A.
AFSK A is the correct sub-mode for "soundcard RTTY".
to change the RTTY tones to match your software
configuration.
73,
~iain / N6ML
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.
/8" plug at the KAT500 end is securely connected.
It's (too) easy to pull it out slightly and loose (sic) connection.
What happens when you select the correct COM port and click on [Test
Communications] on the [Port] tab of the KAT500 Utility?
73,
~iain / N6ML
___
On Thu, Dec 26, 2013 at 10:21 AM, Phil Kane wrote:
> On 12/26/2013 8:17 AM, iain macdonnell - N6ML wrote:
>> These have caught my eye at my local Costco recently:
>>
>> http://www.costco.com/Sony-MDR-10RDC-Premium-Noise-Canceling-Headphones.product.100083695.html
>>
>
choose. At least with the Costco one, you can
return it to the store if it doesn't work out...
73,
~iain / N6ML
On Thu, Dec 26, 2013 at 8:17 AM, iain macdonnell - N6ML wrote:
> These have caught my eye at my local Costco recently:
>
> http://www.costco.com/Sony-MDR-10RDC
ction quality as your MDR-V6's (guessing), but may be worth
checking out if you're a member, or know someone who is...
73,
~iain / N6ML
On Wed, Dec 25, 2013 at 2:16 PM, Joel Black wrote:
> I am looking for a pair of noise cancelling headphones.
>
> I have a pair of Sony MDR-V6
anadapters, which need
to keep track of the exact I.F. center frequency as filter bandwidths
and shifts are changed by the operator."
73,
~iain / N6ML
On Thu, Dec 5, 2013 at 1:06 PM, KD7YZ Bob wrote:
> Howdy K3' people:
>
> I am playing with the SDR-IQ and a program called SDR-
a couple of months ago. A
workaround is to [try to remember to] leave the AF gain controls on
the remote K3 at your preferred positions, since actually the value
reverts to those values, not to zero.
73,
~iain / N6ML
__
Elecraft m
o me.
If you're sending CW through the RemoteRig units, you're not using the
K3's internal keyer, so changing its speeed would be irrelevant (as
would the WPM displayed).
73,
~iain / N6ML
__
Elecraft mailing list
Home: http:
the 220VAC supply going to mine, which
runs off the K3's ACC 12V output, so if I power-cycle the K3, the
KPA500 follows. It is necessary once in a while, when the firmware
hangs.
73,
~iain / N6ML
__
Elecraft mailing list
Home: http:/
O3 Audio IO Board shows this too.
73,
~iain / N6ML
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list host
ation issue in the KPA500 - support should be
able to help with that.
73,
~iain / N6ML
On Fri, Oct 25, 2013 at 1:56 PM, Fred Jensen wrote:
> I will second Jack's observations. When we remodeled and added the room
> that houses my radios, I had them put a 3" steel
I seem to remember have heard of this problem several times on the
reflector before.
Iain G4SGX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailm
Hi Chuck,
You could use the "Command Tester" tab, and enter a command like
"^FC5;" (without the quotes).
If seems like a valid RFE for the KPA Utility, to add a user-friendly
control for this. Maybe contact support and suggest it or maybe
K6KR is listening...
73,
~i
it has go to somewhere... but from a scan of the assembly
instructions, I can't find it either.
73,
~iain / N6ML
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.ht
this, if you can reproduce the problem
73,
~iain / N6ML
On Tue, Sep 24, 2013 at 7:45 AM, Bill W2BLC wrote:
> That is what I was looking for - I am not alone and perhaps it is just how
> things work on the combo.
>
> If that is how things are, that is fine - still beats usi
,
~iain / N6ML
On Tue, Sep 24, 2013 at 7:11 AM, Bill W2BLC wrote:
> The reason I asked the original question is my experience with the KPA500
> and KAT500:
>
> KPA500 in the OPER mode.
> KAT500 in AUTO (solid on).
> K3 set to 25 Watts when running with the amp.
> Eve
One correction - data is not permitted on the 75m band, which is
defined as 3.600-4.000MHz, only on the 80m band, which is
3.500-3.600MHz.
73,
~iain / N6ML
On Mon, Sep 23, 2013 at 8:51 PM, Rick Bates wrote:
> In the US, the entire band is available for data on 160, 80/75 and 30
>
ail in the
KAT500 Utility help.
Full tuning will require a key-down signal - SSB won't do it - so, as
Gary suggests, "teaching" it about various segments within each band
(especially 80m) will help with smooth operation a
*may* be as simple as 'sudo apt-get install ia32-libs'. If that
doesn't do it, try this:
ldd '/home/sam/elecraft/k3util_1_13_6_17/k3util
Libs/RBGUIFramework.so' | grep 'not found'
to see what you're missing...
73,
~iain / N6ML
On Wed, Sep 4, 2013
l audio
output. Not 100% sure which of the steps fixed it, but we're glad it's
sorted.
Thanks for your advice, Chloe is just finalising the re-assembly after
testing so she'll be on the air again in no time.
73, Iain M0PCB
On 31/08/2013 19:46, Don Wilhelm wrote:
Iain,
I sus
fore?
Any pointers appreciated. If replying to the reflector please copy
direct to my email address as I may miss responses in the daily digest.
Many thanks,
Iain M0PCB & Chloe M0GEJ
__
Elecraft mailing list
Home: http://mailman.
1 - 100 of 754 matches
Mail list logo
