Propagation seemed good this week, but QRM from 14.315 was a problem for
some. We had 27 participants over a 25 minute net, with no discussion
following check-ins. Thanks to everyone who checked in. Here is the list of
participants.
Station NameQTH Rig S/N
WB6CLZ Mike
The weekly Elecraft SSB net will meet tomorrow (10/17/10) at 1800z on 14.314
MHz. I will be net control from western Oregon, and I will try to swing the
antenna in multiple directions to get as many of you as I can. The calling
by a strong station from back east was effective last week in pulling i
Propagation within the US was spotty this week, though both EI6IZ and ZL1PWD
checked in off axis to my quad. Jim, W4RKS had a strong signal here in OR;
and he called for those I couldn't get, turning up another six stations.
Thanks, Jim. There were 20 of us over a 20 minute, with no discussions
f
The weekly Elecraft SSB net will meet tomorrow (10/10/10) at 1800z on 14.314
MHz. I will be net control from western Oregon, and I will try to swing the
antenna in multiple directions to get as many of you as I can. We need a few
good relay stations too. See you then.
73,
Phil NS7P
_
Propagation seemed OK this week, though the number of stations checking in
was down due to QRM (CA QSO Party). There were 18 of us over a 20 minute
period. Both EI6IZ and ZL1PWD checked in with good signals off axis to my
quad. In fact, KG7UY in OR (the only other OR/WA station that was on the
n
The weekly Elecraft SSB net will meet tomorrow (10/3/10) at 1800z on 14.314
MHz. I will be net control from western Oregon, and I will try to swing the
antenna in multiple directions to get as many of you as I can. See you then.
73,
Phil NS7P
__
The weekly Elecraft SSB net will meet tomorrow (9/26/10) at 1800z on 14.314
MHz. Gary, K7VED, will be the net control station this week from his very
capable station in Eastern Washington. Join the fun.
73,
Phil NS7P
__
Elecraft mailing
Tony was a regular on the Sunday Elecraft SSB net, where he always had a
good signal, a cheerful demeanor and a heplful approach (relaying weak
stations, etc.). He will surely be missed.
73,
Phil, NS7P
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mai
Propagation seemed good this week, though the number of stations checking in
was down a bit. The discussions were on the availability of the KPA500
(thanks to Lyle for being a good sport about it) and the need for the K3
buffer mod if using the P3. Thanks to everyone who checked in. Here is the
Cc: Phil and Christina
Subject: Re: [Elecraft] Problem with my K3
Obvious suggestion, but did you check antenna port assignment on 20M? Could
you have inadvertently changed it from ANT1 to ANT2 or something on that
order?
Grant/NQ5T
On Sep 18, 2010, at 5:33 PM, Phil and Christina wrote
, but I guess I had
the spacing too close for the paddle's tolerances (it was cool in the
shack).
73,
Phil, NS7P
-Original Message-
From: Tom Hammond [mailto:n...@embarqmail.com]
Sent: Saturday, September 18, 2010 3:57 PM
To: Phil and Christina
Subject: Re: [Elecraft] Problem with my
I need some advice. I had the K3 on this afternoon and tuned to the low end
of 20M (about 14.001x). I had been going into and out of the shack with the
radio in receive mode. I went into the shack and heard a continuous string
of dots. I tried to tune the signal, only to realize that it was my
The weekly Elecraft SSB net will meet tomorrow (9/19/10) at 1800z on 14.314
MHz. I will be net control from western Oregon, and I will try to swing the
antenna in multiple directions to get as many of you as I can. See you then.
73,
Phil NS7P
_
I will not be able to conduct the Elecraft SSB net this Sunday. The fellows
who have occasionally filled in for me can't do it either.
So, we need someone to step forward and take the net this week. The net
meets at 1800Z on Sundays on or about 14.314 MHz. It is a fun group and
very informal. Wh
Propagation seemed good this week. We did have to move down 2 kc to get
away from a special event station that moved up to 14.315 for us. Hope
everybody found us ok. To me, most siganls were good, but there was
splatter at times running on top of the weaker signals. We still have
trouble at tim
The weekly Elecraft SSB net will meet tomorrow (9/5/10) at 1800z on 14.314
MHz. I will be net control from western Oregon, and I will try to swing the
antenna in multiple directions to get as many of you as I can. See you then.
73,
Phil NS7P
___
Propagation was uneven this week. The great plains and west were good here
in Oregon, but signals from the eastern third of the country were not very
strong. California was good at my QTH, but I needed relays for the
Washington stations. There was a quick discussion about the availability
date for
The weekly Elecraft SSB net will meet tomorrow (8/29/10) at 1800z on 14.314
MHz. I will be net control from western Oregon, and I will try to swing the
antenna in multiple directions to get as many of you as I can. See you then.
73,
Phil NS7P
_
...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net]on Behalf Of Brendan Minish
Sent: Monday, August 23, 2010 4:13 PM
To: Phil and Christina
Cc: Elecraft
Subject: Re: [Elecraft] Elecraft SSB Net results (8-22-10)
On Sun, 2010-08-22 at 16:19 -0700, Phil and Christina wrote:
> EI
Propagation seemed good this week. The number of check-ins was the largest
in quite some time - there were 42 of us over 34 minutes! Early in the net,
the check-in requests sounded like a DX pileup. The main discussion this
week was about the DSP board upgrade and its advantages. Thanks to everyo
The weekly Elecraft SSB net will meet tomorrow (8/22/10) at 1800z on 14.314
MHz. I will be net control from western Oregon, and I will try to swing the
antenna in multiple directions to get as many of you as I can. See you then.
73,
Phil NS7P
__
Please ignore this post. It went out by mistake. Apologies to Gus.
Phil
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net]on Behalf Of Phil Shepard
Sent: Friday, August 13, 2010 1:29 PM
To: Augie Gus Hansen
Cc: elecraft@mailman.qth.net
Su
This is a strange "long delayed echo". I sent it yesterday morning!
73,
Phil
NS7P
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net]on Behalf Of Phil and Christina
Sent: Saturday, August 07, 2010 9:16 AM
To: elecraft@mailm
East coast stations were not very strong today, and we had no California
check-ins. Lyle using his prototype KPA500 was S9+10 into the side of my
quad - not bad for less than 300 miles! The net only ran 20 minutes with 26
participants. No discussion. Here is the list of the participants.
Station N
I didn't see this come through, so I am resending it.
Phil
-Original Message-
From: Phil and Christina [mailto:ph...@rio.com]
Sent: Saturday, August 07, 2010 9:16 AM
To: elecraft@mailman.qth.net
Subject: Elecraft SSB net announcement
The weekly Elecraft SSB net will meet tomorrow
The weekly Elecraft SSB net will meet tomorrow (8/8/10) at 1800z on 14.314
MHz. I will be net control from western Oregon, and I will try to swing the
antenna in multiple directions to get as many of you as I can. See you then.
73,
Phil NS7P
___
Propagation seemed a little better this week. The only discussion this week
was about the shipment dates of P3s. There were 29 of us
over 30 minutes. Thanks to everyone who checked in. Here is the list of
participants.
Station NameQTH Rig S/N
N6JWJohn
The weekly Elecraft SSB net will meet tomorrow (7/25/10) at 1800z on 14.314
MHz. I will be net control from western Oregon, and I will try to swing the
antenna in multiple directions to get as many of you as I can. See you then.
73,
Phil NS7P
__
Propagation was spotty this week, but the "whole" continent was present.
There were no discussions today beyond the check-ins. There were 27 of us
over 26 minutes. Thanks to everyone who checked in. Here is the list of
participants.
Station NameQTH Rig S/N
VE3QF Ton
The weekly Elecraft SSB net will meet tomorrow (7/18/10) at 1800z on 14.314
MHz. I will be net control from western Oregon, and I will try to swing the
antenna in multiple directions to get as many of you as I can. See you then.
73,
Phil NS7P
__
Propagation was much better this week. Signals were generally good in Oregon
from across the country. Paul, AD5SX, checked in on solar power. There were
no discussions today beyond the check-ins. There were 24 of us over 18
minutes. Thanks to everyone who checked in. Here is the list of
participa
Propagation to the east from Oregon was nearly absent. Only four of the 21
participants were from east of the Rockie Mountains. West coast signals
were generally OK however. Lyle checked in using a prototype KPA500 that
sounded good. Thanks to everyone who checked in. Here is the list of
partici
The frequency for the SSB net tomorrow should be 14.314 MHz. Sorry for the
mistake.
73,
Phil, NS7P
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net]on Behalf Of Phil Shepard
Sent: Saturday, July 03, 2010 11:43 AM
To: elecraft@mailman.qt
We had a good net today with a total of 33 participants again. Signals were
generally good. We ran for about 30 minutes. The only discussions were on
audio quality checks. Thanks to everyone who checked in. Here is the list
of participants.
Station NameQTH Rig S/N
W2RWA
The net today had 19 participants again. Signals were generally good. We
ran for 20 minutes, and the discussions were on the new DSP board and audio
reports. Thanks to everyone who checked in. Here is the list of
participants.
Station NameQTH Rig S/N
W5ETJ Gary
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 12/20/09 at 1800Z on 14.314
MHz. Hopefully, propagation will be good. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraf
The net today had 19 participants. Signals were generally good. We only ran
for 14 minutes, and the only discussions were on the lack of signals in the
10 meter contest. Thanks to everyone who checked in. Here is the list of
participants.
Station NameQTH Rig S/N
K0JWC
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 12/13/09 at 1800Z on 14.314
MHz. Hopefully, propagation will be good. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraf
The net today had 17 participants, but many signals were not that strong.
We only ran for 13 minutes, and there were no discussions.
Thanks to everyone who checked in. Here is the list of participants.
Station NameQTH Rig S/N
W3HVG Pat PA K1 83
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 12/6/09 at 1800Z on 14.314
MHz. Hopefully, propagation will be good. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
The net today had 23 participants but was troubled by QRM from 14.313MHz.
The QSO on that adjacent frequency had said that is was wrapping up before
1800Z, but evidently stayed on that frequency after our net started. We
shifted up to 14.315 MHz part way through the net, but still were troubled
by
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 11/29/09 at 1800Z on 14.314
MHz. Hopefully, propagation will be good. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraf
Hi gang,
Due to the ARRL Phone Sweepstakes contest this weekend, we will not have the
SSB net tomorrow. Enjoy SS, and see you next week.
73,
Phil, NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
He
When we have an east coast US station with a potent signal/good antennas, we
can try having them listen for your area. That might help you check in, but
you probably won't hear most of the net. Somewhat Like Peter, ZL1PWD, who
checks in sometimes.
73,
Phil, NS7P
-Original Message-
We had a good net today with 32 participants. Propagation seemed better
than in some recent weeks. The discussions were on the W2 and P3.
Thanks to everyone who checked in. Here is the list of participants.
Station NameQTH Rig S/N
W4LTLou FL K3
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 11/15/09 at 1800Z on 14.314
MHz. Hopefully, propagation will be good. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraf
The net was challenging today with spotty propagation and a fair amount of
QRM. There were 13 of us, and we ran for 11 minutes. The only discussion
was a question to ask if anyone had a W2 up and running yet. No one did.
We did have Peter, ZL1PWD, check in from New Zealand (off the back of my
qu
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 11/8/09 at 1800Z on 14.314
MHz. Hopefully, propagation will be good. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraf
I trust that I am not the only one who does not want this type of material
on the Elecraft reflector. Back to our normally scheduled programming,
thank you.
73,
Phil, NS7P
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net]on Behalf Of Bi
The web site is correct for the NA SSB net (1800Z). Thank you.
73,
Phil, NS7P
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net]on Behalf Of Eric Swartz -
WA6HHQ, Elecraft
Sent: Monday, November 02, 2009 10:08 AM
To: Mark C. Killmon
Cc: e
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 11/1/09 at 1800Z on 14.314
MHz. Note that this is the same Universal Time, but it will be an hour
earlier in your local time. I will not be able to be there, but Mark, K4SO,
in Virginia will be the net control station. Hopefully, propagati
ould be back on next week. Have a great weekend and CQWW (if you
participate).
73,
Phil, NS7P
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net]on Behalf Of Phil and Christina
Sent: Friday, October 23, 2009 11:59 AM
To: elecraft@mailman.
Hi gang,
This Sunday at our net time the CQWW SSB contest will be hot and heavy.
Does it make sense to have our net anyway and fight the QRM. Or should we
cancel our net this week? I'd like your feedback on this. Thanks.
73,
Phil, NS7P
_
Another good net inspite of some QRM. There were 22 of us, and we ran for 23
minutes. The signals were generally OK, although a few required relays to
get
through. The discussions were on audio quality checks for several stations.
Thanks to everyone who checked in. Here is the list of participan
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 10/18/09 at 1800Z on 14.314
MHz. Hopefully, we will have good propagation. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/e
craft-boun...@mailman.qth.net]on Behalf Of Phil and Christina
Sent: Wednesday, October 14, 2009 5:16 PM
To: Elecraft Reflector
Subject: [Elecraft] K3 - computer communications
I use Logic 8 as a logging program, and it has communicated fine over a
serial port with my K3 (s/n 1826). Today a windstorm
I use Logic 8 as a logging program, and it has communicated fine over a
serial port with my K3 (s/n 1826). Today a windstorm dropped a tree across
a power line, and the power surged on and off several times before going off
completely. The computer is a Dell laptop in a docking station. The
comp
Wow, it was the best net we have had in awhile. There were 28 of us, and we
ran for 33 minutes. In addition to all of the stateside stations, we had
Andy, M0CHK, from the UK and Peter, ZL1PWD, from New Zealand! That spread
us across a lot of time zones! The most unusual weather was 6 inches of
s
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 10/11/09 at 1800Z on 14.314
MHz. Hopefully, we will have good propagation. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/e
The California QSO Party was providing lots of QRM around our regular
frequency today. I opened on 14.314 MHz, but quickly announced a QSY to
14.317, which was quieter but still noisy. Anyway, there were 10 of us on
14.317. We ran for 8 minutes there. Afetr we concluded, I went down to
14.314 a
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 10/4/09 at 1800Z on 14.314
MHz. Hopefully, we will have good propagation. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/e
ey might want to. They have neither the budget or
> time to solve literally tens or even hundreds of millions (no
> exaggeration here!) of these cases. Pandora is well and truly out of
> the box on this one.
>
>
> I would respectfully suggest a permanent change of net frequency
We kept our frequency on 14.314 MHz again today to try to dodge some QRM
that has been persistent on 14.316 for some people. We had 14 participants
including net control and ran for 14 minutes. The discussions were about
difficulty getting "stereo" out of the headphones for one station and help
w
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 9/27/09 at 1800Z on 14.314
MHz. This QSY 2 kHz down is an attempt to dodge QRM on 14.316 Mhz that has
troubled some net participants. Hopefully, we will have good propagation.
See you there.
73,
Phil, NS7P
___
We switched our frequency to 14.314 MHz today to try to dodge some QRM that
has been persistent on 14.316 for some people. That change was positive for
one of the stations that has reported issues before. However, today a DX
contest was providing plenty of QRM all over this end of the band. Many
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 9/20/09 at 1800Z on 14.314
MHz. This QSY 2 kHz down is an attempt to dodge QRM on 14.316 Mhz that has
troubled some net participants. Hopefully, we will have good propagation.
See you there.
73,
Phil, NS7P
___
Hi gang,
Several folks have recently reported a carrier on or just above 14.316 MHz
for our Sunday SSB net. We can try moving down a bit to 14.314 MHz if that
helps. Is there any problem that anyone sees with this move? Thank you.
73,
Phil, NS7P
_
We had a very short and sparse SSB net today on 14.316 MHz. The signal
levels were not very good. We only had 12 participants including net
control and ran for 11 minutes. My apologies to KB9BNI, but I was unable to
pull your rig information through. Here is a list of the 12 participants:
Stat
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 9/13/09 at 1800Z on 14.316
MHz. Hopefully, we will have good propagation. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/el
We had a nice SSB net today on 14.316 MHz. The signal levels were just OK.
We had 19 participants including net control and ran for
31 minutes. The discussions involved K3 knob and encoder problems
(especially the four knobs to the left of the main tuning knob).
Here is a list of the 19 participa
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 8/30/09 at 1800Z on 14.316
MHz. Hopefully, we will have good propagation. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/ele
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 8/23/09 at 1800Z on 14.316
MHz. I will be away from my station and unable to be there. Hopefully by
the net time there will be someone to step forward and act as the net
control station. Thank you.
73,
Phil, NS7P
We had a nice SSB net Sunday on 14.316 MHz. The signal levels were OK for a
change. We had 20 participants including net control and ran for
22 minutes. The discussions involved F/W ver 3.25 and NR changes, as well
as on the new P3 (price, etc.).
Here is a list of the 22 participants:
Station N
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 8/16/09 at 1800Z. The net
will
start at 14.316 MHz. Hopefully, we will have some decent propagation. I
will be looking for midwest and east coast stations to put out calls for
check-ins to see if we can pick up a few others we may be missin
Signal levels still were way down, and check-ins were light. At the end of
the net, AK5U asked about K3 memory management software. He is inquiring on
the reflector. We ran 13 minutes and had 15 participants.
Here is a list:
Station NameQTH Rig S/N
AD5SX Paul
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 8/9/09 at 1800Z. The net will
start at 14.316 MHz. Hopefully, we will have some decent propagation. I
will be looking for midwest and east coast stations to put out calls for
check-ins to see if we can pick up a few others we may be missin
Wow, what a sparse net we had today. Signal levels were way down, and
check-ins were few. There were no discussions after check-ins. We ran 12
minutes and had 12 participants.
Here is a list:
Station NameQTH Rig S/N
K6UONormCA K3 755
W0FM
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 8/2/09 at 1800Z. The net will
start at 14.316 MHz, and QSY if needed. Hopefully, we will have some decent
propagation. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Hom
First, I want to apologize for the delay in getting this report out. I was
tied up with house guests.
Anyway, we had a nice SSB net Sunday on 14.316 MHz. The signal levels were
OK for a change. We had 22 participants including net control and ran for
24 minutes. The discussions involved pumpin
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 7/19/09 at 1800Z. The net will
start at 14.316 MHz, and QSY if needed. Hopefully, we will have some decent
propagation. Take a break from the VHF contest and check in. See you
there.
73,
Phil, NS7P
___
Thanks Mark. Good job!
73,
Phil
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net]on Behalf Of Mark C. Killmon
Sent: Sunday, July 12, 2009 2:00 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Sunday Elecraft SSB net report 7-12-2009
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 7/12/09 at 1800Z. The net will
start at 14.316 MHz, and QSY if needed. I will not be able to be there, but
Mark, K4SO, in Virginia will be doing the net control duties. Have a good
one.
73,
Phil, NS7P
__
We had a nice but somewhat challenging SSB net today (1800Z) on 14.316 MHz.
The signal levels were way down, but attendance was back up from recent
weeks. We had 22 participants including net control and ran for 33 minutes.
The discussions involved pumping Lyle, KK7P, for information about upcomin
Hi gang,
The weekly Elecraft SSB net will meet today, 7/5/09 at 1800Z. The net will
start at 14.316 MHz, and QSY if needed. Hope to see you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/
I ran a 1B field day station in my north meadow this weekend using my 9
month old K3. I had thought that I would use my K2 instead for its lower
current consumption, since I was using batteries and a solar panel. I
couldn't give up the K3 performance and features however, so I went with
that. Po
Hi gang,
The weekly Elecraft SSB net will meet Sunday, 6/21/09 at 1800Z. The net will
start at 14.316 MHz, and QSY if needed. I will not be able to be there, but
Mark, K4SO, in Virginia will be doing the net control duties. Let's hope
conditions are better than last week. Have a good one.
73,
We had a very short SSB net today (1800Z) on 14.316 MHz. The signal levels
were way down and attendance was too. Perhaps it was propagation, coupled
with the VHS contest (I know I have been enjoying working new grids on 6
meters with the K3) and general summertime lulls. We had 10 participants
i
Hi gang,
The weekly Elecraft SSB net will meet tomorrow (Sunday, 6/14/09) at 1800Z.
We will start at 14.316 MHz, and QSY if needed. The net control is in
western Oregon, but we will need a good east coast or midwest station to
relay a few west coast signals that may be too close to net control.
Hi gang,
The weekly Elecraft SSB net will meet tomorrow (Sunday, 6/7/09) at 1800Z. We
will start at 14.316 MHz, and QSY if needed. I will not be able to be
there, but Mark, K4SO, in Virginia will be doing the net control duties.
Have a good one, and I will see you next week.
73,
Phil, NS7P
___
We had a short SSB net today (1800Z) on 14.316 MHz. The signal levels were
terrible. A couple of stations were S7/8, but most were S5 or weaker.
Probably half of the check-ins required net control to run the gain wide
open to (barely) copy. We had 14 participants including net control and ran
for
Hi gang,
The weekly Elecraft SSB net will meet tomorrow (Sunday, 5/31/09) at 1800Z.
We will start at 14.316 MHz, and QSY if needed. The net control is in
western Oregon, but we will need a good east coast or midwest station to
relay a few west coast signals that may be too close to net control.
We had a light SSB net today (1800Z) on 14.316 MHz. The signal levels were
not particularly good. The strongest signal to net control was 58, with many
below 56. We had 16 participants including net control and ran for 22
minutes. The discussions concerned K3 knob problems and the size of the K3
Hi gang,
The weekly Elecraft SSB net will meet tomorrow (Sunday, 5/24/09) at 1800Z.
We will start at 14.316 MHz, and QSY if needed. The net control is in
western Oregon, but we will need a good east coast or midwest station to
relay a few west coast signals that may be too close to net control.
When will new manuals be available that reflect the most recent K3 firmware?
Thank you.
Phil
NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecra
We had a nice SSB net today (1800Z) on 14.316 MHz. The signal levels were
not particularly good. We had 21 participants including net control and ran
for 22 minutes. The discussions concerned details about the new watt meter
and 2M transverter, as well as conjecture about the panadapter.
Here is
Hi gang,
The weekly Elecraft SSB net will meet tomorrow (Sunday, 5/17/09) at 1800Z.
We will start at 14.316 MHz, and QSY if needed. The net control is in
western Oregon, but we will need a good east coast or midwest station to
relay a few west coast signals that may be too close to net control.
We had a short SSB net today (1800Z) on 14.316 MHz. The signal levels were
not particularly good. We had 23 participants including net control and ran
for 16 minutes. There were no discussions after the check-ins.
Here is a list of the 23 participants:
Station NameQTH Rig S/
Hi gang,
The weekly Elecraft SSB net will meet tomorrow (Sunday, 5/10/09) at 1800Z.
We will start at 14.316 MHz, and QSY if needed. The net control is in
western Oregon, but we will need a good east coast or midwest station to
relay a few west coast signals that may be too close to net control.
We had a short SSB net again today (1800Z) on 14.316 MHz. The signal levels
were down considerably to net control. Stations that are usually well over
S9 were about S9, and most east coast stations were below S6 (some in the
noise most of the time to me). Relays were needed. We had 19 participants
Hi gang,
The weekly Elecraft SSB net will meet tomorrow (Sunday, 5/3/09) at 1800Z.
We will start at 14.316 MHz, and QSY if needed. The net control is in
western Oregon, but we will need a good east coast or midwest station to
relay a few west coast signals that may be too close to net control. S
1 - 100 of 162 matches
Mail list logo