Hi,
Nothing up here in Montreal...but I've never been on 6m. Is this USB? FM?
Tom
-Original Message-
From: Bill Johnson
Sent: Monday, June 5, 2017 2:58 PM
To: Wayne Burdick ; Elecraft Reflector
Subject: Re: [Elecraft] 6 meters is open
Wayne, thanks for heads up. Nothing open here
There is a plan to have study the effect.
http://eng.umb.edu/~eclipsemob/
Tom, W1TEF
Lexington, SC
On 6/2/2017 2:54 PM, Bruce Beford wrote:
Does anyone know of any plans for any HF nets that will be running
specifically for observers of the Solar Eclipse on August 21st? I plan to
travel
I'm the second owner, original receipt, original packaging, barely used. Was a
back up to an Expert 1k.
$1800 shipped conus.
Also have a custom bag made for it we can negotiate.
Tommy
W0XXX
__
Elecraft mailing list
Home:
suggestions are welcome and you certainly gave me something to think
about.
Thanks.
Tom, W1TEF
Lexington, SC
On 5/28/2017 2:04 PM, Phil Hystad wrote:
I looked into that very question a few months ago (February)…
My comments:
1. I don’t think Hardrock-50 has an auto-tuner so in pricing
these paddles have the
same issue?
Thanks.
Very best regards,
Tom, W1TEF
Lexington, SC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
will be greatly
appreciated. Also, as the
Hardrock 50 is a kit, how hard is it to build for something with finger
nephropathy?
Thanks for any info.
Very best regards,
Tom, W1TEF
Lexington, SC
__
Elecraft mailing list
Home: http
Jose,
Look at the bottom of this page.
http://mailman.qth.net/mailman/listinfo/elecraft
On Fri, May 26, 2017 at 9:49 AM, <n2...@n2lrb.com> wrote:
> http://mailman.qth.net/mailman/listinfo/elecraft
73,
Tom - KQ5S
__
I had forgotten about setting the SUB AF to balance. Thanks for the
reminder.
Is there a macro command that will adjust the balance? I set the SUB AF to
Balance and the knob on the radio controls the balance. My macro to set
the SUB AF Gain still sets the gain instead of the balance.
73,
Tom
Greetings,
I was just looking at the KX2 firmware, Beta and 2.69 and discovered
that they were built
and released in the 11th Century!! Who knew?!?
**MCU 2.69 / DSP 1.49, Final Release Feb 5, 1017**
**MCU 2.75 / DSP 1.49, April 7, 1017
**Best regards,
Tom, W1TEF
Lexington, SC
Thanks to all who responded to my post. Looks like it's pretty
much unanimous, the K2 makes a great Field Day radio.
You folks are the best!
Tom K0SN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
am not familiar with the radio and my concern would be
mainly in the area of ease-of-use for those operators who are not especially
experienced or knowledgeable in using modern transceivers.
Thanks in advance for any input you might offer.
73
Tom Hellem
K0SN
Missoula, MT
support!
73 Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Any thoughts on new Elecraft equipment being introduced at Dayton?
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
for the remote computer yet and before I buy one I would
like to make sure that the codec will pass the client audio to the radio
while in SSB mode. I think I might have read where the CODEC does not work
in SSB mode but only in one of the data modes.
Tom - KQ5S
://www.youtube.com/results?search_query=win4k3suite and read some reviews
at http://www.eham.net/reviews/detail/11214
There is a fully functional 30 day trial available at va2fsq.com
73 Tom
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
are interested: t...@wb7eux.net
Thanks and 73,
Tom
--
Tom Bingham WB7EUX
http://www.wb7eux.net/
SKCC 9833S
NAQCC 6346
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
cent bulbs.
Does anyone with a low serial number have this and can better explain it?
Tom, wb2qdg
K2 s/n 1103
On 4/4/2017 3:18 PM, Harry Yingst wrote:
How did you get the Amber display?
----
*From:* Tom McCulloch <
Amber here..s/n 1103
Tom
wb2qdg
On 4/4/2017 9:33 AM, Ken G Kopp wrote:
Mine is without a doubt "green" ...
On Apr 4, 2017 7:26 AM, "Bert Craig" <wa...@arrl.net> wrote:
My K2/100 display is green, much more plea
Fishing Rod
25 inches - fits in a suit case just fine. Very light - 10 ounces. Expands
to nearly 27 feet. I don't use the last length. I purchased two of them.
I use it with my KX2 and a 35ft and 43ft end fed antenna set up. Love it.
Tom
On Sun, Apr 2, 2017 at 3:25 PM, Michael Aust <
I have the same set up. My front mic requires bias. My rear does not.
The radio remembers the bias setting for the front and rear mic so I do not
have to adjust it
73,
Tom - KQ5S
On Sun, Apr 2, 2017 at 10:34 AM, Jim Miller <jimmil...@stl-online.net>
wrote:
> I wanted to have two
This will select the Front Mic and set compression to 20 and Mic Gain to
13:
MG013;CP020;MN053;DN;DN;MN255;
This will select the Rear Mic and set the Mic Gain to 9 and Compression to
20:
MG009;CP020;MN053;DN;DN;UP;MN255;
73,
Tom - KQ5S
On Sat, Apr 1, 2017 at 6:16 PM, Alan. G4GNX <
e or theft.
For pictures and a spreadsheet of price breakdown
please visit my website, http://www.wb7eux.net
Click on KX3 Sale.
--
Tom Bingham WB7EUX
http://www.wb7eux.net/
SKCC 9833S
NAQCC 6346
__
Elecraft mailing list
Home: http://mailman.qth.n
I would ditto George Serikas's comments about the tuning knob. Finger
dimple or whatever you feel would help.
Love my KX2 for sure.
Tom
KB5RF
On Thu, Mar 30, 2017 at 9:38 AM, George Sereikas <ser...@comcast.net> wrote:
>
> Wayne,
>
> I have one small request for the KX
, Fldigi works fine. Both Winlink and Fldigi are set to
the same COMM port and the K3S is in USB mode with under CONFIG:RS232.
Fldigi is not running when I use the Winlink software. I use the
Elecraft supplied KUSB cable between the computer and the K3S.
Can anyone give me a clue?
Thanks!
Tom
Hi,
WSJT-X does a few things wrong when it comes to dealing with CAT
communications. I pointed it out to them but it seems they are not
interested in fixing the issues.
Win4K3 gets around the problems but not always.
There might not be much you can do about this.
73 Tom
va2fsq.com
I'm currently running my KX3 with a Windows 10 machine. I just went through
a Windows 10 update and have lost contact with the KX3. The elecraft
utility doesn't connect, nor my N3FJP logging software. Nothing else has
changed. Any suggestions?
Tom Field
KN6DR
Elecraft K2,KX3, KXPA 100
transmit and receive wires, and then
wire them up to a 3.5mm plug. Check out the pin outs in the KPA500 manuals.
The biggest pain here if you do not have a spare USB Serial to 3.5mm, then
you have to wait for a replacement before you know.
At least this way you can find out sooner which device
Hi All,
Unfortunately I introduced an error in yesterdays new version. The fix has
been uploaded. It only applies to CWSkimmer integration so if you do not use
it, you will not need it.
Sorry for the inconvenience
73 Tom
va2fsq.com
---
This email has been checked for viruses by Avast
wish you can even continue to use
NAP3 if you prefer that interface. You can read a review about this here:
http://www.eham.net/reviews/detail/11214
Please check out the 30 day trial at va2fsq.com and the videos on YouTube at
https://www.youtube.com/results?search_query=win4k3suite
73 Tom
OOPS. I looked a the build sheet again and see that I did get the 250
filter. I don't remember ordering it but I did. I also took off the top
cover and the filter is properly annotated.
73,
Tom - KQ5S
On Tue, Mar 14, 2017 at 9:33 AM, Tom <nineb...@gmail.com> wrote:
> Is there an
and the factory installed the 250 filter by mistake then I can only
assume that the factory turned on the 250 filter by mistake.
73,
Tom - KQ5S
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Elecraft MH2 microphone excellent condition, brand new and never taken out of
the box. $40.00 plus shipping. Contact off list please.
Sent from Mail for Windows 10
__
Elecraft mailing list
Home:
I think there is a major Amazon (AWS) cloud computing infrastructure issue
going on today that is causing slow downs with a number of websites. So if
QRZ.com is dependent in any way with that infrastructure they will be
experiencing a slow down. It's impacts a lot of us ...
From their Twitter
Fred,
If your inverted 'L' was a bit less than a quarter wave long, it would have
been capacitive and showing 57-j130 (not plus). In which case you needed a
small inductor to match it to your 50 ohm coax, not a capacitor.
73,
Tom G3OLB
I apologize to Bill for sending this direct to him. I meant to send it to
the group.
73,
Tom - KQ5S
Thanks Bill. I saw the quote below in Fred's, KE7X, K3s book which caused
me some confusion. It seems as though he is saying if you use monaural
headphones then you should not set the speakers
and either the heil headset or a hand microphone into the front.
I read all the warnings about how to connect speakers and headphones. So
is there any harm in connecting the wireless headset(remember it is
monoral) to the phone jack using a stereo plug and keeping Config:Spkrs 2?
73,
Tom - KQ5S
with software
like N1MM+, FLDigi and others.
Also, check out the 3D spectrum prototype on the YouTube link.
73 Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
My mic gain is set to 9 as well.
73,
Tom - KQ5S
On Sat, Feb 11, 2017 at 9:28 PM, RIchard Williams via Elecraft <
elecraft@mailman.qth.net> wrote:
> Tom,
> I would use whatever setting works the best; if you are receiving good
> audio reports, "leave sleeping dogs lie".
Something isn’t racking then because Fred in his K3s book recommends high for
the electrek mic. Per Fred and Heil’s recommendation I am using a Heil BM-10ic
and have the radio set to High with bias and I get good audio reports.
You have me wondering now?
73,
Tom - KQ5S
On Feb 11, 2017, 8:22
electrek mics were high output so find it strange
that they would not require a low setting.
73,
Tom - KQ5S
On Sat, Feb 11, 2017 at 7:07 PM, Don Wilhelm <donw...@embarqmail.com> wrote:
> Tom,
>
> Unless I read the K3 and K3S manual incorrectly, Heil has the "HIGH" and
c Bias to the "ON" option.
Keep in mind this will have much more output and 'may' overdrive the mic preamp
so keep ALC in range.
73,
Tom - KQ5S
On Feb 11, 2017, 3:56 PM -0600, Bill DeVore <maxr...@gmail.com>, wrote:
> I have an Elecraft K3S and a Heil PR10. I recently started gett
the issue at least for the FTDI chipset.
73 Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Thanks Ron.
73,
Tom - KQ5S
On Sun, Jan 29, 2017 at 8:48 PM, Ron D'Eau Claire <r...@cobi.biz> wrote:
> Yes. There is an automatic resetting fuse in the main circuits and a
> circuit
> breaker for the amp that is reset with a button on the back of the K3S.
>
> 73, Ron AC
Thanks Don. I though the K3S was protected but I did a quick search of the
manual for fuse and only found a reference to fusing both positive and
negative cables if using a battery.
73,
Tom - KQ5S
On Sun, Jan 29, 2017 at 4:47 PM, Don Wilhelm <donw...@embarqmail.com> wrote:
> Tom,
&
Are folks hooking their radios directly to the power supply without a fuse
inline? I noted that the Elecraft supplied cable for my K3S did not
include a fuse.
73,
Tom - KQ5S
On Sun, Jan 29, 2017 at 12:49 PM, George Thornton <
gthorn...@thorntonmostullaw.com> wrote:
> The history of
I guess we need an alternate definition of "random" ;-)
Tom
wb2qdg
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailm
I just made this mistake in replying to a post by Jim. I was not paying
attention and sent the reply direct to him :-)
73,
Tom - KQ5S
On Wed, Jan 25, 2017 at 6:45 PM, Jim Brown <j...@audiosystemsgroup.com>
wrote:
> That depends on settings within the email reflector and also on
Jim,
It seems like most of the larger displays are 19V. At least mine are. My
one smaller screen is 12V. I have powered it from the station power. Are
your monitors only 12V? If not how are you powering them from your station
power
73,
Tom - KQ5S
On Wed, Jan 25, 2017 at 1:06 PM, Jim Brown
continuously. There are a couple of commands like that which then require
reading the VFOB display to determine where you are.
It should work fine now if timing isn't an issue.
73 Tom
va2fsq.com
-Original Message-
From: Don Wilhelm
Sent: Tuesday, January 3, 2017 11:23 PM
To: Harry Yingst
Try http://www.ssbusa.com/LINGUA.html. Not a very well defined web site.
Let us know if you contact them.
73,
Tom - KQ5S
On Wed, Dec 21, 2016 at 9:47 AM, W0MU Mike Fatchett <w...@w0mu.com> wrote:
> Thanks.
>
> I wonder if there are plans for a USA distributor? I would like t
button. The oscillator will stop running
shortly after the last key press or the last data communication with other
equipment and restart automatically when needed.
2.
3.
Tom, KQ5S
On Sun, Dec 11, 2016 at 11:40 AM, Ken K3IU <kenk...@cox.net> wrote:
> I sent an em
when you are not using it.
73 Tom
-Original Message-
From: George Kidder
Sent: Tuesday, December 6, 2016 1:37 PM
To: 'Elecraft Reflector'
Subject: [Elecraft] Fwd: Re: LP Bridge crashes with K3
Larry and all,
I have now tried adjusting the buffer settings. Originally, they were
set
products from Eltima such as their serial port
monitor will crash on their own if left running long enough. Even then, the
MicroHam uses Eltima drivers and they have no issues I believe.
However, LPB does not pass all K3 commands and this will cause issues.
73 Tom
va2fsq.com
-Original Message
and the SDRPlay
RSP. There is no configuration necessary to support all modes and filter
settings for QSY's.
There is a fully functional 30 day trial available at va2fsq.com
73 Tom
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
. Includes hand
mike, power cord and power supply. I am asking $2,400.
plus shipping continental USA from 75964. E-mail me
if interested. Thanks, Tom KF5WBS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Very cool. I need to dig mine out one of these days.
Tom, W1TEF
On 11/19/2016 7:32 PM, a...@juno.com wrote:
Not to worry though - not *that* kind of bug:
http://ae5x.blogspot.com/2016/11/two-way-vintage-bug-qso.html
John AE5X
How
There is a free full featured 30 day trial. Please contact me if you have
tried this in the past and would like an extension on your trial.
Thanks very much for your continued support.
73 Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
ATU require for a
portable hike type operation? I realize it's more weight, I am just curious to
explore what's possible.
Thank you,
Tom KG5LBP
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Many thanks! I now have 6 copies, lol
Seems a few minutes after I looked for it it came back up.
73 Tom
-Original Message-
From: Tom
Sent: Tuesday, November 1, 2016 7:05 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KX2 manual not found on Elecraft server
Hi,
Can someone
Hi,
Can someone send me the KX2 manual please?
It is no longer available at the link specified on Elecraft’s server. I’m sure
they will fix it, but I need it now if possible.
Thanks, Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com
Oh wow - my Dad had one of those - does that go back a few years.
Donate it to W1AW museum - I don't know who the station engineer is anymore
as I left there in the late '80s, but I'm sure they would really
appreciate the donation.
Tom, W1TEF
On 10/30/2016 9:33 AM, Kenneth Christiansen wrote
this in the
menus for the K3 under TUN PWR.
73 Tom
va2fsq.com
-Original Message-
From: Bill Wiehe via Elecraft
Sent: Sunday, October 30, 2016 3:20 PM
To: Elecraft Reflector
Subject: [Elecraft] KAT500 - Tuning Anomoly
Up until last week, my KAT500 has run lawlessly. However, it now has
?v=htVlc9x0IoU
There is a fully functional 30 day trial available at va2fsq.com
73 Tom
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing list
Home: http
window. If you are just running one Window's program it works fine but
once you start multi-tasking it can be a problem particularly if the
programs are graphic intensive or memory hungry. I often found the
computer slowed up too much and gave up on the idea hence the stand alone
computer.
73,
Tom
A re-calibration is required on the transmitter for one of the firmware
releases.
Tom, w2yf
On Oct 1, 2016 11:52 AM, "Phil Hystad" <phys...@mac.com> wrote:
> To the K3/P3 utility experts…
>
> A friend of mine, owner of K3/P3, has not updated his K3/P3 firmwar
experience this?
My HV voltage is 75 at idle. I am using 120V power. When I key down it
drops to around 58. Manual says 60+ is best. Don't know if this has
anything to do with the hum?
I have not contacted Elecraft yet. I wanted to hear what folks say first.
73,
Tom
KQ5S
As a K2 only owner I appreciate when the posters reference the equipment
they are posting about in the subject line (e.g. "K3"). This helps with
auto sorting.
Tom, wb2qdg
K2 #1103
On 9/21/2016 1:29 PM, Thomas Taylor wrote:
On Tue, 20 Sep 2016 18:35:27 +
Eric J <eric_c..
Post production screwups happen all the time. I had it happen to me
when I was a Tech Editor
at QST in the mid-80's.
Stuff happens. However, in this case, it might not have been, but
always benefit of the doubt.
Tom,, W1TEF
On 9/16/2016 8:43 PM, Joe Reed wrote:
That was mighty lame
with identical results.
The K3S seems to work fine in CW and SSB modes.
I would appreciate any insights that might help me understand what is happening.
73,
Tom
N4WE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
that
is allowed on this
forum.
I must admit, when I thought of it, I didn't think it would work, but it
did over 10,000 miles this
summer on trips.
Tom, W1TEF
On 9/12/2016 8:24 AM, Wayne Michael wrote:
I have a 2012 Kia Sedona minivan.
I currently have a FTM-400 mounted using a seat mount.
Any ideas what
Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Same here - I like it a lot - perfect size for just messing around - I
have the KX3 if
I want to get serious. :-)
Tom, W1TEF
On 8/28/2016 12:22 PM, Chuck Guenther wrote:
I've only had KX2 serial No. 857 for about ten days. It was purchased
as a replacement for my KX1, to be used primarily
Any idea of when the K3 Utility for Mac will be updated?
Tom K4AEN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
and I'm a bit "shaky" on top of that (nerves) so if it
involves
little tiny parts, I'm going to have to look for some help from friends
which
I would rather not do - I'm stubborn that way. :-)
Thanks for any information.
Tom, W1TEF
Lexington
Will do - thank you.
Tom, W1TEF
On 8/4/2016 5:27 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
Hi Tom - Before shipping the paddle, please make sure first to contact
our support team via supp...@elecraft.com or on the phone to get a
return Service Authorization (RSA) tracking number, return
it. I really like both my KX3 and
KX2 - I have a hard time choosing between the two if I'm going
somewhere. :-)
Thanks again - much appreciated.
Very best regards,
Tom, W1TEF
Lexington County, SC
On 8/4/2016 3:37 PM, Wayne Burdick wrote:
Hi Tom,
Your KXPD2 should not have any issue
help keep the costs down on the
KX2 options.
However, when I called Elecraft, my complaint was heard and they are
looking into
the issue. Hopefully they can come up with an answer.
Best regards,
Tom, W1TEF
Lexington County, SC
On 8/4/2016 1:22 PM, Sid Frissell wrote:
Well, I guess I've
That would be a no for me. Money is not the issue. Just do not need more
than the KPA500 I now have. Only use it now for skeds when conditions do
not support a contact at 100 watts.
73, tom w7sua
On 8/1/2016 9:55 AM, Wayne Burdick wrote:
This would be extreme overkill, IMHO. I suggest
There is a free full featured 30 day trial available at va2fsq.com. If you ran
the trial in the past and would like to try it again, please drop a note.
73 Tom
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
, badly is by far the most common. The
Genasun regulators are pretty quiet, but so far, they only make units
for much smaller systems.
I'll keep looking for quiet MPPT charge controllers. My battery bank is
1200 amp-hr at 12 volts. Thanks!
73, tom w7sua
73, Jim K9YC
of our house as it was an off-grid solar home.
You can see the panels on my QRZ page's aerial view.
73, tom w7sua
On 7/18/2016 12:05 AM, Alan Bloom wrote:
I am contemplating having a solar photovoltaic power system installed on
my roof. There was an article by K1KP in April 2016 QST about
Good question. I ordered one and will find out when I try to put it in.
I could find no instructions but have not written back to see if they
have any.
73, tom w7sua
On 7/13/2016 2:51 PM, Sverre Holm (LA3ZA) wrote:
The QRP shop IF buffer amplifier looks spot on, but does anyone have any
How about this one?
https://sage-shop.com/epages/qrp-shop.sf/en_GB/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapterBest%C3%BCckt
A K2 IF adapter kit from QRP shop
https://sage-shop.com/epages/qrp-shop.sf/en_GB/
??
73, tom w7sua
On 7/13/2016 5:06 AM, Don Wilhelm wrote:
Tom,
The answer
such as HRD Logbook,
DXLabs, N1MM and more.
- Full access to almost all regular and tech mode menu items.
Win4K3Suite offers a free full featured 30 day trial.
You can see it in action here:https://www.youtube.com/watch?v=htVlc9x0IoU
and the trial is at va2fsq.com
Thank, Tom
va2fsq.com
---
This email
had been
reporting my signal. :-)
Anyway, my real reason for writing, the 2.66 code on the KX2 was great to
work with for digital operations.No fussing with modes while jumping
between different MIC settings, audio cables and such. A real pleasure to
work with the radio now... Thanks!
Tom, W2YF
Hi,
I notice that the KX2 only displays to the 10’s of hz and also only allows
tuning to 10’s of Hz in all modes except data. Am I missing something? Can I
tune to the Hz?
Thanks, Tom
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
be coming soon
73 and happy Fourth!
Tom K4AEN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
I am unable to erase the CW Memories in my KX3. I've followed the procedure
in the Owners Manual and in Fred Cady's book.
Would appreciate any help.
Tom
KN6DR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Correct, something has to be plugged into the jack (a mic or soundcard) before
the KX2 will let you change those two in particular.
Tom, W2YF
> On Jun 23, 2016, at 9:49 PM, Michael Walker <va...@portcredit.net> wrote:
>
> No mic plugged in as it is a Heil mic.
>
&g
Mike,
Do you have a mic plugged in? If not the KX2 is in internal mic mode.
Also, make sure you are not in data mode... the KX2 won't let you change some
of those settings in data mode.
Tom, W2YF
> On Jun 23, 2016, at 9:37 PM, Michael Walker <va...@portcredit.net> wrote:
>
>
shopping
cart vendor.)
Feel free to call or email sa...@elecraft.com if you do not receive an email
order confirmation quickly
73,
Eric
elecraft.com
_..._
On Jun 22, 2016, at 9:06 PM, Tom <tom...@videotron.ca> wrote:
Well lo and behold. This time I received an email confirmation.
Well lo and behold. This time I received an email confirmation. I do not
have one from when I placed the order a few weeks ago.
Funny, Ron in sales says they do NOT send an email confirmation.
73
-Original Message-
From: Bob
Sent: Wednesday, June 22, 2016 2:55 PM
To: Tom ; Elecraft
Hi,
Well it seems that the order I placed never made it into the Elecraft
computers. So KX2 support will be at least 4 weeks out for Win4K3.
Off to place the order again.
And no, emails are only sent when shipped.
73
-Original Message-
From: Tom
Sent: Wednesday, June 22, 2016 2:08 PM
The reason I ask is that early this month I ordered a bunch of stuff and I
remember seeing the web page confirmation but I do not seem to have any email.
Does one get sent?
Thanks, Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com
with
minimum fuss.
You can see Win4K3Suite in operation here:
https://www.youtube.com/watch?v=htVlc9x0IoU
A free full functioning download is available at va2fsq.com
73 Tom
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
are seeing). Check and see if you are on that
FW release.
On the KX2 I am set at 5W out (not the full 10W due to duty cycle of the
digital I use) and I am still getting the full 5W out with the battery pack
about half depleted (if I believe the amp hours reading).
Tom, W2YF
On Fri, Jun 17, 2016
the radio can get a bit confused, thinking it
is in PTT, but not going into TX.
Tom (W2YF)
On Wed, Jun 15, 2016 at 7:18 PM, Luke via Elecraft <elecraft@mailman.qth.net
> wrote:
> Let's try this again! For whatever reason my gmail app on my Android must
> be formatting something
ower it up, and it is
not plugged into anything, does it act like it is looped, and all the
knobs seem to work, and the VFO's etc move? Or does it act like a K3 in
the remote mode, but with out a RS-232 connection, and just sit there?
Thank you
Hi
I agree that those devices were good. I have an emu 0404. They will indeed
continue to use the old beta driver.
73 Tom
-Original Message-
From: Barry LaZar
Sent: Thursday, May 19, 2016 4:02 PM
To: k3...@arrl.net ; b...@hogbytes.com ; d...@ellmore.net ; k3...@arrl.net ;
k
performing
this alteration.
YMMV, but you can always order the screw if you have an epic fail.
Tom, W2YF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
401 - 500 of 3044 matches
Mail list logo
