Hi
In my opinion, TeamViewer offers the most flexibility. It also Lows streaming
of video so you can watch your station at the same time.
73s Tom
Va2fsq.com
Original message
From: faber mosquera alvarez hk6f@gmail.com
Date: 13/08/2014 13:18 (GMT-05:00
.
The export allows you to export the current settings of the menu commands you
see as well as the current state of the K3 or KX3.
Memory frequency files are separate as are macros.
Of coarse with enough demand this can be enhanced .
73’s Tom
va2fsq.com
On Jul 29, 2014, at 2:16 PM, Jorge Diez - CX6VM
Hi there is none.
You can adjust it up and down but there is no direct command to read it.
73s Tom
Original message
From: Fred Jensen k6...@foothill.net
Date: 28/07/2014 17:06 (GMT-05:00)
To: Elecraft Reflector elecraft@mailman.qth.net
Subject: [Elecraft] K3 Commands
Hi
Is there a way to shorten the 'diddle at the end of an fsk transmission when
you are using the internal fsk decoder/encoder programmatically?
I know that in the k3 utility you can set the length of this but what if you
are not using the utility and writing you own code?
Thanks, Tom
Hi,
The BW commands are incorrect. They should be in 10Hz increments.
Thus for SSB you would want BW0210; not BW02100;
Could be the reason.
73’s Tom
va2fsq.com
On Jul 20, 2014, at 6:07 PM, Randy Diddel k5...@arrl.net wrote:
Good afternoon,
I finally had some time to sit down with the Fred
Also how did you fix it?
Tom - wa4ta
Date: Wed, 16 Jul 2014 09:59:20 -0700
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft] K3 receiver troubleshooting
From: elecraft@mailman.qth.net
Thanks to all who offered helpful suggestions. They were all via email -
you
notice
delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
function?
Thanks, Tom
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
Hi
OK got it now.
I was doing some programming of these functions looking mainly at the api and
things didn't seem to make sense.
Thanks!
Original message
From: Don Wilhelm w3...@embarqmail.com
Date: 14/07/2014 9:08 PM (GMT-05:00)
To: Tom tom...@videotron.ca,Elecraft
Hi
What about a webcam? Some 720 p cams let you get close enough.
Tom
va2fsq.com
Original message
From: tom armour wa...@hotmail.com
Date: 10/07/2014 7:14 PM (GMT-05:00)
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Update on a Question About the P3 SVGA
not be understanding what
you are asking al. I do have a Softrock light IF to a sound card on my Windows
PC. I have not tried it to my Macbook Pro, but that is a company machine.
Tom - wa4ta
From: eda...@law.du.edu
To: elecraft@mailman.qth.net
Date: Thu, 10 Jul 2014 20:15:43 +
Subject: [Elecraft
the software issues an FA0001420 for example (that is a command to
tune to 14.2 mhz. Also see if you see some kind of delay. Some of the other
modes in the serial port monitor, can give timestamps too which might be
useful.
Send an excerpt if you can do this and may be we can see something
73s Tom
are out of luck.
No need to look at HRD, it “works”.
Hope this helps.
Tom
va2fsq.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Hi
Is it possible to transmit a Carriage return/line feed with FSK and psk?
If so is it a actual carriage return?
Thanks, Tom
va2fsq.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
...@embarqmail.com
Date: 25/06/2014 6:49 PM (GMT-05:00)
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 FSK and psk
Tom,
In ASCII code (used for PSK), LF and CR are two separate characters. LF
= hex A and CR = hex D.
A true CR has no line feed associated with it, and a LF has no CR
associated
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
likely, I have unknowingly changed the configuration parameter
affecting communications.
Can someone point me in right direction to solve my interface
problem? I'm stumped!
Tom, K8JRM
__
Elecraft mailing list
Home: http
speaking with Elecraft, I am sending my K3 in for a check-up
and to be upgraded while it is there! At my age installing a new
surface mounted chip is out of the question!
Thanks to all who responded to my call for help!
73, Tom
__
Elecraft
Hi
Yes look in the K3 KX3 programmer reference under the SWT command
. Tom
Original message
From: Hisashi T Fujinaka ht...@twofifty.com
Date: 13/06/2014 19:55 (GMT-05:00)
To: Stan Gibbs, KR7C s...@kr7c.net
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3
that helps.
73 - Tom - wa4ta
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
value and do some programming logic you are
out of luck.
Hope this helps
73s Tom
Original message
From: Charles Sanders no5w.ch...@gmail.com
Date: 27/05/2014 22:29 (GMT-05:00)
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 Noise Reduction Adjustment via CAT
Hi
You can turn off the amp into a low power state and turn it on
programmatically.
The turn on is a bit tricky, and requires some delay and retries but it does
work.
However you cannot do the equivalent of turning off the power switch but that
is really not needed.
73s Tom
va2fsq.com
Nothing is bulletproof except Kevlar. Yes there are a lot of quirks but
compared to the rest of the IT world, there's little to commit about. Yes it's
2014 but everything works one way or another. Just have to massagw it a bit.
Try programming all of the menu items then comment lol.
73s Tom
Hi Andy,
Make sure you have the latest firmware on your KAT500. I am many others had
similar issues and we're resolved with the firmware.
73s Tom
Va2fsq.com
Original message
From: ANDY NEHAN andy.ne...@btinternet.com
Date: 20/05/2014 08:44 (GMT-05:00)
To: elecraft
You probably want this
adapter:http://www.radioshack.com/product/index.jsp?productId=12970495
But it is hard to tell without knowing what type of new computer you got.
Tom - wa4ta
From: w...@i29.net
Date: Mon, 5 May 2014 13:14:52 -0500
To: Elecraft@mailman.qth.net
Subject: [Elecraft] TIP
Ed and Ted,
Try going to google images and see the images for “hutch for elecraft k line”.
There are some neat ideas there.
Tom
Sent from Windows Mail
From: Dauer, Edward
Sent: Monday, May 5, 2014 5:52 PM
To: elecraft@mailman.qth.net Reflector
Looks great, Dave
/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http
1. When in transmit using SSB, I am getting some sort of audio feedback
only when I have the monitor level turned up. The louder I turn up
Monitor, the more feedback I get.
2. I have somehow turned off the NR for SSB mode only... When I press
the 8 key, (NR), I get N/A if in SSB mode. If in
://www.dh8bqa.de
Am 15.04.2014 22:21, schrieb tom...@videotron.ca:
Hi,I was wondering if one can use the FM filter if you set the width to 6kHz
for ESSB mode or do you need a 6kHz filter?
Thanks
Tom
vba2fsq.com
__
Elecraft mailing
about the SUPER late reply to your original post...I get so much stuff in my
inbox that it's taken me this long to catch up!
Tom, KD0BCF
Two possibilities exist...
Either we are alone in the universe or we are not.
Both are equally terrifying
Hi
I second the hardware mod. For programs such as Win4k3suite which poll the Kat
keeping the sleep mode on introduces unacceptable delays. So instruct people to
turn sleep mode off.
73s Tom va2fsq
Original message
From: Stan Gibbs, KR7C s...@kr7c.net
Date: 11/04/2014
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
then will be gone. 73, Tom N3XQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
I want to thank all the K3 owners in my area for their kind responses. It
really speaks well of the owners willingness to help clarify questions.
73,
Tom
N3XQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Thanks for asking and answering this question. This was on my list of
things to figure out.
Tom - wa4ta
On Thu, Mar 27, 2014 at 3:53 PM, Joe Harris joseph.a.har...@gmail.comwrote:
Ed,
See page 20 of the K3 manual, in the Line Out setting. You can set the Line
Out level in Config
something simple and something I've done (or not done) . .
73
Tom K4AEN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
I am in the same boat.
I added my gmail account since my wa4ta at hotmail account is not receiving
mail from QTH.net
I opened a ticket with Microsoft over a week ago. I have received a few
messages from the list since then but not many.
Tom
On Mon, Mar 24, 2014 at 8:48 AM, ejk...@gmail.com
Hi
You could check out Win4k3Suite at va2fsq.com
Tom
Original message
From: Jim Bennett w6...@mac.com
Date: 24/03/2014 14:17 (GMT-05:00)
To: Elecraft Reflector Reflector elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Software???
You might want to specify Mac
on my 4th attempt at downloading.
Any suggestions?
73,
Tom
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
would be to have a threshold where if the, signal was above this, then it would
not be considered in the calculations.
That is preferable to turning off the auto balance since the correction is
frequency dependent.
73s Tom
Original message
From: Jim Bennett w6...@mac.com
I noticed during a recent CW contest that my computer-generated CW was not QSK
(key jack in the rear) but the internal CW Keyer (paddle) was. I have the rig
set for QSK. I could swear that in previous contests the QSK was consistent.
I must be missing something?
Tom, K4IE
I noticed the last CW contest I worked that the computer generated CW (Key
jack) is not QSK even though QSK is set on the rig. It works fine with the
internal keyer. I know that it worked previously so I must have changed
something inadvertantly.
Tom, K4IE
I am surprised no-one mentioned this.
You can buy retention clips if you have issues with disconnects: Anderson part
# 110G68
They cost about 50 cents.
Can we drop this subject now? it has been re-hashed many times.
73 - Tom - wa4ta
Date: Thu, 13 Mar 2014 12:05:49 -0300
From: mike.har
Looks like im going to have to wait until the snow on the roof is gone. Cant
budge the cable at all. And on top of that we're geting 10 more inches tonight.
Thatnks for all the responses
Tom
Original message
From: Ian White gm3...@ifwtech.co.uk
Date: 12/03/2014 03:59 (GMT
on your mic cable, but the best
solution is to keep the RF out of the shack with the addition of effective
common mode chokes in your antenna system.
73,
Don W3FPR
On 3/11/2014 4:39 PM, tom...@videotron.ca wrote:
Ok,
So my audio is quite distorted as I can hear in my headphones
Hi
No you do not need a Y cable to connect the P3. You connect to a serial cable
between them and the p3 then connects to the MicroHam.
73s Tom
Original message
From: Richard Thorne rtho...@rthorne.net
Date: 05/03/2014 08:37 (GMT-05:00)
To: Elecraft Reflector elecraft
Hi The Avermedia Hd game broadcaster with the vga input will work alone, or
with win4k3suite which allows point and click Qsy.
Be aware however, that the 32 bit drivers have issues. On a 64 bit system
they work fine.
73s Tom
Va2fsq.com
Original message
From: Howard
://www.w8ji.com/end-fed_1_2_wave_matching_system_end%20feed.htm
http://betterqrp.com/page5.php
http://www.parelectronics.com/end-fedz.php
GL
Tom WB2QDG
K2 1103
Oh Wow. Oh Wow. Oh Wow.
--- Steve Jobs October 5, 2011
On 2/22/2014 5:59 AM, PGSchreier wrote:
Hi gang,
I would like to find
it, if it continues.
73- Tom - wa4ta
From: phys...@mac.com
Date: Wed, 19 Feb 2014 10:15:42 -0800
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Noise, RFI ?
Using my K3 I was trying to pick up a ZL2 station (New Zealand) around 18.08
MHz this morning (about 9:50 AM PST) when this huge noise
and waiting a
week to get it.
I can get this cable locally: http://www.qvs.com/specs/CC320M1-xx_S.jpg
Will that work for the AUX cable?
K3 #7999KAT500 #1099
Thanks
73 - Tom - wa4ta
Date: Fri, 24 Jan 2014 16:04:41 -0800
From: j...@audiosystemsgroup.com
To: elecraft@mailman.qth.net
Subject: Re
missed something in the setup?
Tom K4AEN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
the feed line.
You can test this by using an external tuner and placing a watt meter both in
front and behind the tuner and see what kind of loss you are getting.
Yes the tuner will have loss, but relatively negligible.
73 - Tom - wa4ta
Date: Tue, 11 Feb 2014 11:47:19 -0600
From: jvand...@gmail.com
I solved the real estate problem Bought a 39 inch 4k resolution monitor for
less than 500 bucks. That plus my 30 rotated vertically takes care of this
nicely lol..!
Original message
From: Frank Precissi vad...@gmail.com
Date: 10/02/2014 20:27 (GMT-05:00)
To:
Cc:
. On the mini beam, it's gone. Any
ideas why the attic antenna is doing this?
Thanks
Original message
From: Wayne Burdick n...@elecraft.com
Date: 08/02/2014 19:29 (GMT-05:00)
To: tom...@videotron.ca
Cc: Elecraft Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Issue with the KX3
Hi
The gain is definitely the fix. That plus the attic. Thanks.
Original message
From: Wayne Burdick n...@elecraft.com
Date: 08/02/2014 19:57 (GMT-05:00)
To: Tom tom...@videotron.ca
Cc: Elecraft Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Issue with the KX3
It's the USB to serial.
But like Wayne mentioned there's a fix.
Thanks
Original message
From: bill conkling n...@widomaker.com
Date: 08/02/2014 21:49 (GMT-05:00)
To: tom...@videotron.ca
Cc: Elecraft Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Issue with the KX3
No.
The K3 works very well with built-in 2m XVTR and the Elecraft
external XVTR kits.
On Thu, 30 Jan 2014 18:58:46 -0800, you wrote:
A friend on another list came up with the idea of an all-mode
transceiver for 2m and above.
It would be especially nice to see coverage of 1.25m, and possibly
with the KAT500 vs the internal tuner other
than portability? I hope to be able to make an order soon.
Thanks
73 - Tom - wa4ta
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
to run QRP.I do not intend to move the K3 a lot. I have another radio I can
use portable.
With the old amp should I have an AUX cable? or is the RCA cables
Rig-KAT500-Amp enough?
73 - Tom - wa4ta
Date: Sat, 25 Jan 2014 09:27:07 +0800
From: vr2...@yahoo.com.hk
To: elecraft@mailman.qth.net
*BW and the HighFreqPassbandend = FI - IS +0.5*BW (assuming of
course that the FI offset is negative)
Does this make sense?
I think i’ve had my head in to much code lately and tried a few hardware pan
adapters and started losing track of things, lol
Just need a reality check.
Thanks, Tom
What's the opinion on BOSE COMPANION 2 SERIES III MULTIMEDIA Speakers for use
with K3 or KX3?
You WILL experience RF getting into them on the upper bands. They sound good
and function well on the lower bands (75 160) but as you move up to the
higher bands...key that mike and begin to
I've done something weird with the K-3 vfos. On 15mtrs A and B are
tracking together. B can be adjusted, but when A is turned, B moves too. How
do I get them independent again?
Tom, K4IE
__
Elecraft mailing list
Home: http
Hi Wayne,
Can you guess as to whether the KX3's 2m module will perform better or
worse than an FT-817 on 2m?
What would a performance comparison between a KX3-2m and an FT-817 look
like on 2m?
The 817 out of band 2m receive is very limited.
73,
Tom, N2YTF
If you are working the bands 30m and below and have the room you can
use inverted V antennas that all have the same feed point. The power
will be distributed to the the antenna that is resonent at the
transmit frequency.
Until I was able to get room and funds for rotable antennas and
longer wire
EXCELLENT
Amateure Radio Operator N5GE
On Tue, 31 Dec 2013 11:23:23 -0800, you wrote:
Hi all,
Yesterday we analyzing the reports of unexpected SWR faults and band changes.
They fall into a few categories, and we have a good handle on how to deal with
all of them in firmware. (Faults
already tuned there.
Tom
Original message
From: Roy Morris w4...@carolina.rr.com
Date: 30/12/2013 14:18 (GMT-05:00)
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3/KPA500/KAT500 SWR Problem
I have also experienced the FAULT LED coming on with indication of high SWR
Hi
I am used to sound card based ratty where the software just sends the sound to
the radio via line in.
In the case of fskd and a program supporting fskd, what exactly is being sent
to the radio? Can you use the k3 without software in this case?
Thanks
Thanks
installed it
all yesterday and did lots of connections.
Thanks
Original message
From: Rick Tavan N6XI rta...@gmail.com
Date: 29/12/2013 18:03 (GMT-05:00)
To: Tom tom...@videotron.ca
Subject: Re: [Elecraft] How does fskd work on the k3?
You can FSkey the K3 via the ACC
Hi
Thanks just found that.!
Thanks to all for the hints.
Tom va2fsa
Original message
From: Richard Ferch ve3...@storm.ca
Date: 29/12/2013 20:50 (GMT-05:00)
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] How does fskd work on the k3?
Tom,
If you are using
Google Acom splitter
I do not endorse the product, nor the use of 6KW for amateur purposes, but it
may meet your use case
73, Tom W2SC
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Richard Thorne
Sent: Saturday
Hi,
I just hooked up my Microkeyer 2 installed all software and the software is
communicating with the radio. However if I talk into my Mike there is no
transmit occurring via Vox or PTT on the radio.
Pi am using a Heil preset as received from Elecraft.
I have the k3 front mic cable.
I
.
Below is the data from the program: Any one have any other Ideas?
Tom F.
KI6NRD
Rig Name = Elecraft
Read Frequency Command = FA;
Read Mode Command = MD;
Convert To Hex = False
Com Port Name = COM4
Baud Rate = 4800
Parity = None
Stop Bits = 2
Data Bits = 8
Power Option = None
Numeric Frequency
off tune mode.
Am I missing something here?
Thanks, Tom
va2fsq.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Ron,
Litium batteries are expensive and you cannot recharge them. I'm in
the process of building a charging system for my weather station
which uses a lithium battery at night and on cloudy days.
I chose a 12V solar panel that charges a 12v lead acid battery which
in turn connnects to a device
on the meter of my power supply, but it's not reflected on the K2 display.
Any ideas?
Tom
KI6NRD
K2 # 7432
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Nope. But you could use macros. You may have to split the macro in 2 if the k3
doesn't keep up though.
73s Tom
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Nate,
I am a member of Navy Marine Corps MARS and have many of the MARS
allocations saved in my K3 memories. All of them are outside the Ham
Bands.
My solution to not preventing transmission mistakes like transmitting
on the WWV frequencies, or transmitting SSB in the CW Bands, or out
side the
Lots of good advice here.
Win7 is a good choice if you can get it on new laptops. It’s not always
available anymore and Win8 is a PIA.
One thing I didn’t see mentioned and it probably a good indication of adequate
performance is to get a laptop with Wireless N capability. These days, some
Or you can buy the stripper from DX engineering and two twists gives a
perfectly stripped cable (no affiliation here)
Original message
From: Dale Putnam daleput...@hotmail.com
Date: 12/11/2013 16:11 (GMT-05:00)
To: mcduf...@garymcduffie.com,elecraft@mailman.qth.net
over the 600 hz line. the BFO jumps and then starts over again. Any
Idea what the problem is?
Tom F.
KI6NRD
Elecraft K2/100 7432
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Thanks Don for the heads up. I downloaded version 16 from your site. Works
FB.
Tom
KI6NRD
Elecraft K2 #7432
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Some SDR software will set up the sound device completely I.e. set the device,
channels, sampling rate levels explicitly while other will take the system
defaults. In these cases I.e. rocky it will use whatever is the current default
in windows.
Tom
Original message
From
Just out of curiosity, has anyone been able to run Spectrogram on Windows 7
or Windows 8. I haven't had any luck, and would like to reset my filters.
Tom F
KI6NRD
Elecraft K2 #7432
__
Elecraft mailing list
Home: http://mailman.qth.net
In Canada we have the Basic, Basic with honors, and advanced. The advanced is
like the US extra.
Original message
From: Fred Smith m...@totalhighspeed.com
Date: 06/11/2013 07:40 (GMT-05:00)
To: 'Tom Blahovici'
tom...@videotron.ca,d...@w3fpr.com,elecraft@mailman.qth.net
That sounds like a better solution. UnfortunTely the eBay 8 port USB to serial
does not have a case.
Thanks
Original message
From: Matt Zilmer mzil...@verizon.net
Date: 06/11/2013 09:29 (GMT-05:00)
To: Tom Blahovici tom...@videotron.ca
Cc: d...@w3fpr.com,elecraft
and the tone is nowhere near my sidetone, making
the SPOT useless. Frequensee on my phone has the tuned CW signal at about
1200 hz and my sidetone is 600 hz. Before going through the complete
retuning process, my question is there something I should check regarding
the recent mods?
Tom
KI6NRD
Date: 06/11/2013 14:01 (GMT-05:00)
To: Tom tom...@videotron.ca
Subject: Re: [Elecraft] Serial Connection for K2
On 11/6/2013 8:12 AM, Tom wrote:
UnfortunTely the eBay 8 port USB to serial does not have a case.
Looks like I'm not the only one that found that out. The manufacturer
refused
I just completed the KPA100 and KIO2 mods for my K2. I have a new Dell
desktop running Windows 8. I don't have a serial port on the machine. What
is the recommended conversion from serial to USB?
Tom F.
KI6NRD
Elecraft K2 #7432
with a
center frequency of 0??
Does anyone. Have a an explanation?
73s Tom
Original message
From: Tom tom...@videotron.ca
Date: 04/11/2013 18:24 (GMT-05:00)
To: bill conkling n...@widomaker.com
Subject: Re: [Elecraft] Question about filters in USB as shown on a P3
Nope
Check
Thanks Don…,
I guess the upcoming snowy months up here are a perfect time to study for my
advanced license. I’ve got to do something!
73’s
On Nov 5, 2013, at 11:05 PM, Don Wilhelm w3...@embarqmail.com wrote:
Tom,
The P3 is showing you the IF bandwidth of the signal before any filtering
USB cables?
Thanks
On Nov 5, 2013, at 8:54 PM, Don Wilhelm w3...@embarqmail.com wrote:
Tom,
Use a USB to serial adapter with an FTDI chipset - the Prolific chipset does
not like to run at the slower rate required by the K2.
I have also had success with a Keyspan adapter.
If you want to go
Thanks, got it
73s Tom
Original message
From: Joe Subich, W4TV li...@subich.com
Date: 02/11/2013 16:42 (GMT-05:00)
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Question about filters in USB as shown on a P3
The P3 display shows the carrier (dial) frequency
Get the one from Hobbyking for $24 instead of from Power Werx. It is the exact
same Turnigy 130A meter without the power
poles.http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10080You
can buy a lot of power poles for $40.
73, Tom - wa4ta
Date: Wed, 16 Oct 2013 17:42:34 -0700
There is no reason to be scientific about your CW pitch setting.
Set the pitch to the tone you prefer and can hear the best. Use a CW
filter. If you don't have one get one.
Amateure Radio Operator N5GE
On Sun, 13 Oct 2013 14:46:21 +, you wrote:
Hi John,
I read that article too.
also tried three different sound boards and different cables. No difference
at all. Anybody have ideas?
Thanks, Tom va2fsq
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
and it doesn't do much. So far the best I
have obtained is with HDSdr but it really a far cry from something like the p3.
How is this posdible ? I thought SDR was the next best thing!
Tom
Original message
From: Monty S mon...@mindspring.com
Date: 12/10/2013 16:40 (GMT-05:00
it impossible to
distinguish between cw and spurs. There is no adjustment in software for the
inputs but I can adjust the levels on the outside. The images look nowhere like
what you see on YouTube.
Getting pretty frustrated here
Tom
Original message
From: Barry LaZar k3
except for the spur. I'll also try
rockey.
Thanks for the suggestions
Tom
Original message
From: WB4JFI wb4...@knology.net
Date: 12/10/2013 20:49 (GMT-05:00)
To: Tom tom...@videotron.ca
Cc: Barry LaZar k3...@comcast.net,elecraft@mailman.qth.net
Subject: Re: [Elecraft] SDR
This is the perfect tweak to the superb KX3 design, especially for safely
carrying the radio in a backpack. Beautiful design, superbly executed in
the fine Elecraft tradition. Looks good, works well.
Thanks, Scott!!
Tom K7PJT
Hi
I can't seem to get the swr and rf power meter in ssb . I can toggle between
these in cw using the cwt button but in ssb the radio says NA. Is this possible
or am I doing something incorrectly?
Thanks, Tom
Va2fsq.com
__
Elecraft
701 - 800 of 3046 matches
Mail list logo
