doesn't do much. So far the best I
have obtained is with HDSdr but it really a far cry from something like the p3.
How is this posdible ? I thought SDR was the next best thing!
Tom
Original message
From: Monty S
Date: 12/10/2013 16:40 (GMT-05:00)
To: Tom
Subjec
also tried three different sound boards and different cables. No difference
at all. Anybody have ideas?
Thanks, Tom va2fsq
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
This is the perfect tweak to the superb KX3 design, especially for safely
carrying the radio in a backpack. Beautiful design, superbly executed in
the fine Elecraft tradition. Looks good, works well.
Thanks, Scott!!
Tom K7PJT
No! I was in Magog Quebec. Looked for antenna wire at the last minute before
leaving and all I had was 10 feet of zip cord, and the only tree near by was
about 15 feet high. Never expected a QSO
73s Tom
Original message
From: Ron D'Eau Claire
Date: 03/10/2013 18:41
I'm away a couple of days and brought my new KX3. Put up20 feet of wire in a
tree 8 feet high and had a QSO with Ireland, second call.
Nice piece of hardware!
tom
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/lis
Hi
I can't seem to get the swr and rf power meter in ssb . I can toggle between
these in cw using the cwt button but in ssb the radio says NA. Is this possible
or am I doing something incorrectly?
Thanks, Tom
Va2fsq.com
__
Ele
might like to look at it.
73 - Tom - wa4ta
> Date: Wed, 2 Oct 2013 13:36:36 -0400
> From: k3...@comcast.net
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Random wires
>
> No. I expected someone who is an engineer and commands the language
> better than I to explain
enclosed in my hand, I can (mostly) block VOX activation. Is there a way to
decrease Vox sensitivity so I will only trigger transmit when speaking.
Have yet to make SSB contact.
Tom
KI6NRD
__
Elecraft mailing list
Home: http
Hi
I could have sworn I saw it said "not inst"
I checked and it was at "nor"
Alls well now!
Thanks for the help!
Tom
Va2fsq.com
Original message
From: Eric Swartz WA6HHQ - Elecraft
Date: 01/10/2013 22:40 (GMT-05:00)
To: Tom
Cc: Ray Sills ,E
No I do not have the roofing filters but even so, a cw signal without 400hz or
less bandwidth is useless no?
So, if you put the radio in dual watch mode and the VOA and fob frequencies are
the same then guess what? You can get all the way down to 150.
So what gives? Something isn't righ
Original message
From: Tom
Date: 01/10/2013 19:56 (GMT-05:00)
To: Elecraft Mailing list
Subject: Question about my kx3. Problem?
Hi just put together my new KX3 but something seems amiss. I was tuning through
the 40m cw band and I was not hearing any signals.. I then
BW using the pbt and
as soon as it gets to 2.0. I hear signals. Turn it down to 1.9 and nothing. Am
I doing something wrong here? I'm used to a k3
Thanks, TOM
VA2FSQ
Envoyé depuis le Samsung GALAXY S4 via le réseau SFR
__
Ele
the two devices work very well
together.
Tom Childers,
N5GE/NNN0KN
On Mon, 30 Sep 2013 20:49:43 -0400, you wrote:
>Will the KPA500 work on all freqs outside the HF Ham bands.
>I want to make sure it will function on MARS freqs.
>
>
Hi
I tried everything suggested and there is no difference, I guess a call to
support is needed.
Thanks for all the suggestions
Tom
Envoyé depuis le Samsung GALAXY S4 via le réseau SFR
Original message
From: Dick Dievendorff
Date: 30/09/2013 07:40 (GMT-05:00)
To: Tom
Yes the kat3 is in bypass. Also tried this with two different antennas with the
same result
Envoyé depuis le Samsung GALAXY S4 via le réseau SFR
Original message
From: Tom
Date: 30/09/2013 01:06 (GMT-05:00)
To: Gary Gregory
Subject: Re: [Elecraft] Something'
d down retuning and just in tune mode I would see the same
thing if I changed the frequencies by a large amount.
So what gives? What am I doing wrong?
Thanks, Tom
Envoyé depuis le Samsung GALAXY S4 via le réseau SFR
__
Elecraft mailing
computer case.
It was not cheep, but was cheeper than buying 8 RS232 to USB connector
cables.
Tom
N5GE
On Fri, 27 Sep 2013 20:36:22 -0700, you wrote:
>I use a four port USB to serial adapter that connects to four Elecraft
>devices. It's almost as cheap and a bit simpler than a
I have acquired a Yamaha CM 500 headset to use with my newly built K2sb.
I've looked through the archives and found an in line resistor is required.
My question is how to set the jumpers on the front panel board.
Tom
KI6NRD
K2 #
my opinion, (and I could be wrong) CW is
still the most reliable form of communication during poor conditions,
due to it's narrow band width and narrow filtering possibilities.
Tom
On Wed, 25 Sep 2013 01:11:18 +1000, you wrote:
>Tom,
>
>Your suggestion works well, however, when the
Even if they never add the feature, wouldn't it be better to use a
device like the Kenwood SM-230 monitor, rather than giving up an
excellent XCVR for the sake of monitoring youe signal?
Tom
N5GE
On Tue, 24 Sep 2013 10:03:50 -0500, you wrote:
>I know we aren't suppose to do the &#
CW in SSB mode.
2. Connect a cw key to the K3.
3. After you have moved to the new band, tap the CW key one time and
the tuner and amp will be ready to transmit SSB.
Tom N5GE
On Tue, 24 Sep 2013 10:45:13 -0400, you wrote:
>That is what I was looking for - I am not alone and perhaps it is ju
Please try the URL below (The N1MM web site).
This is probably not a K3 problem.
http://n1mm.hamdocs.com
73,
Tom
Amateur Radio Operator N5GE
Licensed since 1976
ARRL Lifetime Member
QCWA Lifetime Member
On Sat, 14 Sep 2013 13:07:12 -0400, Paul VanOveren
wrote:
>Operating in the WAE cont
. I have no need for
the tuner since Win4K3Suite already supports it and the code is transportable.
Same thing for the filters etc. Is there anything I am missing?
I will probably sell the KX3 after the release.
Thanks for your input.
Tom
va2fsq.com
Watch the video! http://www.youtube.com
I don't know about you, but I keep my cell phone in my pocket. I don't really
like the idea of 1W of power being beam at my family jewels!
Sent from my iPhone
On 2013-09-12, at 12:34 PM, aj4tf wrote:
> And, just a reminder, just because you get a patent on something doesn't mean
> it can be m
which antenna output has been
selected.
Having said that, the dummy load solution will work and provide a
method of having the dummy load available for testing.
73,
Tom
Amateur Radio Operator N5GE
Licensed since 1976
ARRL Lifetime Member
QCWA Lifetime Member
On Wed, 11 Sep 2013 11:03:14 -0400
Ditto here - great thread. I'm learning a lot (but then I guess I have
a lot to learn..hi)
Tom
WB2QDG
K2 1103
On 9/4/2013 3:20 PM, Bert Craig wrote:
Eric, please don't shut this thread down. I have gleaned so much useful
information and personal opinions re. this K3/43 ft
There is no justification to say my software is so poorly written. That us very
unprofessional
Thanks joe
Sent from my iPhone
On 2013-09-04, at 3:35 PM, "Joe Subich, W4TV" wrote:
>
> On 9/4/2013 3:10 PM, Karl-Heinz - DL2FAG wrote:
> > I have just test it with virtual serial ports (g
port redirection allowing you to use
third part software remotely and connect to the physical device via IP.
Anyone in the montreal area that can lend a Microham for a few days?
Regards, Tom
va2fsq.com
iPhone
On 2013-09-04, at 3:10 PM, Karl-Heinz - DL2FAG wrote:
> I have just test it with
I have determined that I can emulate the firmware and provide full
functionality via serial commands.
Now, would there be an interest for P3 usage on a kx3 or k2?
Tom
Sent from my iPhone
On 2013-08-27, at 10:33 PM, Tom wrote:
> Hi
> I know that the P3 requires a serial connection to
in my software Win4K3 Suite if I
provide a K2 and KX3 version.
Thanks, Tom
Va2fsq.com
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
So a Pasterack bnc male to bnc male using 24" of RG58 is 23.90 + shipping
Not so bad if it fixes the problem.
Is it supposed to be rg58?
Thanks
Sent from my iPhone
On 2013-08-27, at 12:31 PM, George Danner wrote:
> Tom,
> Try Pasternack or Bracke.
>
> I've used their p
Huh, I just noticed I have them too.
So, given that regular cables don't always remove these, how does one build a
mil-spec bnc cable?
Tom
Sent from my iPhone
On 2013-08-27, at 9:43 AM, Bill wrote:
> Regarding the hump monster appearing on the screen of the P3:
>
> I had th
Wouldn't it be better to find out what's causing the power drop and
fix it?
You shouldn't be having power drops when transmitting at 8 watts.
By the way, you didn't say which Elecraft rig you are using...
73,
Tom
Amateur Radio Operator N5GE
Licensed since 1976
ARRL Lifetime
e men and women and their families for all of
there sacrifices.
Tom
WB2QDG
K2 1103
On 8/20/2013 10:14 PM, Don Wilhelm wrote:
To all,
Thank you, the purse has now been fully funded. Thanks to the
generosity of several hams and Elecraft, my expenses have now been
covered. That is all I
I've been licensed since 1976 and know most the band limits in my
head, but I do have a chart on the wall to look at when I need to
refresh my memory.
Spend a little time learning the band limits of your license class.
You'll be glad you did.
73,
Tom
Amateur Radio Operator N5GE
Lice
Hmmm can't be too many scrap yards up there...
Seriously if he's going to scrap them why ask so much?
Sent from my iPhone
On 2013-08-16, at 6:07 PM, Edward R Cole wrote:
> Lance,
>
> Wow...and I cannot do it, darn! But I have my ch.2 Platinum for 6m. What
> perked my attention was the freq
Hello All,
I picked up a partially completed K2 from an SK sale. I finished adding
the missing parts.
The serial number was never put on. Is there a way to determine the
serial number?
Tom Bryan
N3AJA
__
Elecraft mailing list
Here is a good antennae discussion reflector email address, which is
more appropriate than the Elecraft list: anten...@mailman.qth.net.
Try it you'll like it.
73,
Tom
Amateur Radio Operator N5GE
Licensed since 1976
ARRL Lifetime Member
QCWA Lifetime Member
On Wed, 14 Aug 2013 08:44:33
power and cooling brand.
Get a decent monitor from Samsung or dell for example. No rfi in my experience.
Regards, Tom
va2fsq.com
Sent from my iPhone
On 2013-08-10, at 10:47 AM, Richard Neese wrote:
> if you use a pci card serial its just like using a usb to serial or a edge
> port seria
Hi
Due to popular demand, Win4K3Suite now supports Windows XP
Downloads at va2fsq.com
Thanks, Tom
Watch the video
youtube.com/watch?v=Api2nomzg3U
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
cking voltage on U4, during TUNE at 5 , I only
get 0.3 to 0.4 volts.
The manual suggests that there is a problem with the build of the SWR
bridge. Will check that, but my question is did I fry U1 and could that be
the cause of what I see?
Tom Field
KI6NRD
K2 # 7432
Note: The K2 was working fine as a Q
, Tom
va2fsq.com
Watch the video! http://www.youtube.com/watch?v=Api2nomzg3U
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
around.
Can someone tell me how the SignaLink USB should be connected to the
back of the K3 and what settings should be made in the Menu(s) of the
K3?
Many Thanks,
73,
Tom
Amateur Radio Operator N5GE
Licensed since 1976
ARRL Lifetime Member
QCWA Lifetime Member
keeps the connector surfaces in
good condition but also reduces the amount of force needed to remove the panel.
I can do it with my thumbs now and don't have to use the little screw driver
slot. Remember to remove that screw on the 3-D block on the lower left side.
Good
One caveat with the 1920x1080. Not all monitors work correctly. I have 4 sell
monitors none of which work right.
Tom
Sent from my iPhone
On 2013-07-23, at 5:28 PM, Dave Hachadorian wrote:
> Resolution 1920 x 1080, the bigger the better. I have two K3/P3's with two
> 23" moni
Sorry! Wrong reflector - was meant for the 160 one
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://ww
using!
73
Tom G3OLB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
Hi swaths the K3 zipper?
Sent from my iPhone
On 2013-07-21, at 7:34 PM, Ralph Parker wrote:
> The dreaded K3 'zipper while tuning' appeared suddenly yesterday in the
> middle of the CQ VHF contest.
> I've had #1823 since 2008, and never had (heard?) it before, so I didn't
> pay attention to th
Hello,
There are two new version for Win4K3Suite in the works.
Please take a look at
http://va2fsq.com/?page_id=612
I am looking for additional suggestions, especially for the upcoming Advanced
edition.
Thanks, Tom
va2fsq.com
Check the video:
https://www.youtube.com/watch?v=Api2nomzg3U
Hi,
Ok it seems this is cleared up. Thanks Dirk. But it was Bill who thought it
could be done, not me. I know it can't.
BTW, there is a command that can turn on the KPA via a serial connection.
Tom
va2fsq.com
Sent from my iPhone
On 2013-07-17, at 10:12 PM, Don Wilhelm wrote:
> Tom
d the dedicated serial port for the kpa to control it.
Tom
va2fsq.com
Sent from my iPhone
On 2013-07-17, at 5:34 PM, Don Wilhelm wrote:
> Tom,
>
> Think about it a bit. The K3 ACC cable connects to the KPA500 for the band
> data only. So how could any form of a command be passed o
Ok could be undocumented.
Lets hope Wayne chimes in.
Tom
va2fsq.com
Sent from my iPhone
On 2013-07-17, at 5:25 PM, William Levy wrote:
> Not what Wayne says.
>
> On Jul 17, 2013, at 3:24 PM, Tom wrote:
>
>>
>> Hi
>> Yes they talk to each other but only sen
Hi
Yes they talk to each other but only send band change info and certain other
statuses. To do this with only a macro and no possible hardware is not possible
Tom
va2fsq.com
Sent from my iPhone
On 2013-07-17, at 5:06 PM, William Levy wrote:
> Yes, but they are connected directly in
Hi
That would be news to me, since the k3 and kpa use different serial ports.
Tom
va1fsq.com
Sent from my iPhone
On 2013-07-17, at 2:24 PM, William Levy wrote:
> Somewhere I thought there was written a short macro to designate a button
> on the K3 to turn on the Amp from the K3.
>
&
Yup same ones. Looks like the Ethernet ones are good for remote access. You can
turn on whatever you want as long as the relay board is powered.
Thanks for all the replies.
Tom
Sent from my iPhone
On 2013-07-17, at 10:34 AM, Greg wrote:
> I have heard very good reports on these...
>
the difference
between the serial versions which use a USB connector anyways?
Any ideas? They do look good, with relays supporting 15a at 120
Tom
Va2fsq.com
Sent from my iPhone
On 2013-07-16, at 7:25 PM, William Evans wrote:
> I have used the denkovi 16 relay set and the 8 relay set w
Hi
Can anyone tell me what would be the most popular rs232 (or USB) relay board
for use in computer control of a k3 setup? I use the canakit 4 relay USB board.
Are there others?
Thanks
Sent from my iPhone
__
Elecraft mailing list
Home:
BS...
73,
Tom
Amateur Radio Operator N5GE
Licensed since 1976
ARRL Lifetime Member
QCWA Lifetime Member
On Mon, 15 Jul 2013 11:48:53 -0800, Edward R Cole
wrote:
>I'll make a prediction: CW will largely be history for ham radio
>about 30-years after the date it ceased being a req
Hi, Group,
Those of you who enjoy SWLing and have considered purchasing the KX3 might
want to check out my review of the KX3 as a SW receiver (spoiler: I like
it!):
http://swling.com/blog/2013/07/a-review-of-the-elecraft-kx3-a-world-class-transceiver-superb-shortwave-receiver/
72,
Thomas
K4SWL
related to antennas operation is appropriate.
On Fri, 12 Jul 2013 07:50:43 -0700, Phil Hystad
wrote:
73,
Tom
Amateur Radio Operator N5GE
Licensed since 1976
ARRL Lifetime Member
QCWA Lifetime Member
>I know this is OT but there are so many knowledgable people on this reflector
>that I can't
Although this thread is way OT, I'll chime in with my $.02.
I use an email application called Agent it costs $20.00. You can
find out about it here: http://www.forteinc.com/agent/index.php
73,
Tom
Amateur Radio Operator N5GE
Licensed since 1976
ARRL Lifetime Member
QCWA Lifetime Member
O
noisy than the vertical.
Tom
Sent from my iPhone
On 2013-07-06, at 5:50 PM, "d...@lightstream.net" wrote:
> Hello Tom,
>
> Thanks for your post! As it turns out, I have a local source of broadband
> noise that is not quite as bad as yours, but it still causes me grief.
>
Hit the ENTER key. I don't know why any one would refer to it as a
carriage return unless they were a computer programmer ;o)
73,
Tom
Amateur Radio Operator N5GE
Licensed since 1976
ARRL Lifetime Member
QCWA Lifetime Member
On Sat, 6 Jul 2013 13:48:47 -0400, Tim cook wrote:
>Maybe I&#
>> KPA500 # 149
>> K2/100 #4637
>> K1 #2033
>> KX1 #1023
>> KX3 #583
>> W2
>> T1
>>
>>
>
>__
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
&
with spurious signal removal (CONFIG:SIG RMV), i.e.
removed signals may not be shifted the right amount, and thus may
again be audible. *
73,
Tom
Amateur Radio Operator N5GE
Licensed since 1976
ARRL Lifetime Member
QCWA Lifetime Member
On Sat, 6 Jul 2013 08:23:33 -0400, KD7YZ Bob
send messages via TelNet.
NNN0KYN
NAVMARCORMARS
73,
Tom
Amateur Radio Operator N5GE
Licensed since 1976
ARRL Lifetime Member
QCWA Lifetime Member
On Fri, 5 Jul 2013 19:12:14 -0700, K7JLTextra
wrote:
>I use RMS express with my K3 & KX3, it's an up dated version of Airmail with
&g
limit.
Plasma TV's and their manufacturers are evil.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Fri, 5 Jul 2013 12:02:48 -0700, "Ron D'Eau Claire"
wrote:
>The biggest issue is that the RF is generated in the plasma display itself a
Version 1.10 of Win4K3Suite is now available.
New features include support for Fixed and Tracking mode for the P3 as well as
general P3 control improvements.
Support for Logic 9 logging program is now added. Tested logging programs
include DX4Win, DXKeeper, HRD 6 and 5, and Logger32,
Version 1.1
I've just finished my K2 bare bones, and would like to get on the air. What
SWR will the finals tolerate without harm? I'm using a ground mounted trap
vertical
Tom
KI6NRD
__
Elecraft mailing list
Home: http://mailman.qth.n
refully and shipped USPS Priority
Mail.
Price: $145 (shipping included) PayPal.*
*
*
*If interested, please reply off-list. Thanks!
Cheers,
Tom
K4SWL*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: htt
(shipping included) PayPal.
If interested, please reply off-list. Thanks!
Cheers,
Tom
K4SWL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman
, Tom VA2FSQ. COM
Check out the video!
http://m.youtube.com/#/watch?v=Api2nomzg3U&desktop_uri=%2Fwatch%3Fv%3DApi2nomzg3U
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Hi
There is a version dependency for HRD. Also be sure you are running the logbook
and dm780 only not the control program .which version are you running?
Thanks
Sent from my iPhone
On 2013-06-26, at 10:46 PM, gold...@charter.net wrote:
> All those functions work for me with HRD.
>
> Did you p
First of all reset your email so that it doesn't reject everything
that is not in your address book ;o)
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Fri, 21 Jun 2013 11:35:30 -0700, "Dick Diddams"
wrote:
>GOOD MORNING GARY:
>
>
The amp is on the left in my setup with the CW paddles just under the
Clarifier knob and the straight key just to the right of the paddle.
The KAT500 is centered on the p3 on a shelf three inches above it.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Thu, 20
Well said and a good way to get those words out there by themselves.
I've been doing that and was stunned at how many words I've been
running together ;o)
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Wed, 19 Jun 2013 17:41:18 -0700, Brian Hunt
wro
Those of us who "head copy" CW find Farnsworth code to be very
aggravating because we are hearing words instead of characters.
Military Operators don't like it either because they can't tell where
5 letter code groups start and end.
73,
Tom
Amateur Radio Operator N5GE
ARRL
wer
http://learningmetatrader.com/nfx/ytokkzwali/aufbxklayleprv/himt.phpTom
Fitzgerald
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
What I thought was interesting was that for most of the models there
were only one to three in stock. That makes me think they are
selling like hot-cakes to the CB market, or they are trying to get
rid of them.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Tue
The Koss SB45 (as opposed to the SB40) DOES contain an electret mic insert. I
find this headset very good as an alternative to the Yamaha CM500 which, for
some inexplicable reason, is unobtainable in Eu.
73
Tom G3OLB
GM4LMH wrote
gt;Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email li
n allowing 100,000 lb loads of wheat
on the I-45 corridor to Houston. If it's legal to haul 100,000 lbs,
they will haul 150,000 lbs with 54 foot long trailers.
Sorry about the OT remarks ;o(
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Thu, 13 Jun 2013 12:51:
ected to an oscillator on which participants
would send CW with their left foot. Having your shoe on was
optional.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Thu, 13 Jun 2013 16:24:12 -0400, "Joe Subich, W4TV"
wrote:
>
>> I still don'
I have mine mounted with the base at about ten feet and attached to a
Channel Master Rotor. It is very effective in high noise situations.
I mostly use it from 40 meters down to 80 meters, but have used it as
high as 20 meters. It is connected to the RX Ant connection on the
K3.
73,
Tom
should correct the VFO and by how much.
Tom
KI6NRD
K2 #7432
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Mine say's "STLN FROM N5GE CALL 911"
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Wed, 29 May 2013 18:49:11 -0700 (PDT), Jack Berry
wrote:
>You can edit the banner that scrolls by when power is switched on. Use the K3
>utility to edit
t
>Please help support this email list: http://www.qsl.net/donate.html
>
>______
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mai
Nothing wrong with discussing the mode that is still the most
efficient comm mode available to civilians.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Fri, 24 May 2013 11:02:46 -0700, Lewis Phelps
wrote:
>"What hath God wrought?" is a verbatim q
Does anyone have experience in connecting a K3 to the above software
With a SignaLink integrated sound card?
Any Help would be appreciated...
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
NAVMARCORMARS NNN0KYN
I will not work P5 until they straighten up their act.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Tue, 21 May 2013 09:22:29 +1000, Gary Gregory
wrote:
>Maybe 6M is not available for amateur use in P5
>
>Just guessing.
>
>Gary
>
>
Very Nice!
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Mon, 20 May 2013 08:10:59 -0700, "Dick Dievendorff"
wrote:
>Pignology has one:
>
>http://shop.pignology.net/K3UI-Windows_p_29.html
>
>73 de Dick, K6KR
>
>
>
&
Paul,
Your monitor should have brightness and contrast controls. You
should use those to adjust the SVGA brightness and contrast, as you
would on any TV or monitor.
Setting the SVGA bias will only adjust the color saturation of the
SVGA waterfall.
73,
Tom
Amateur Radio Operator N5GE
ARRL
is as it was before the
installation. That covers any existing cables you may have moved
around.
Good luck,
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sat, 18 May 2013 18:41:53 +0200, "Fausto Coletti"
wrote:
>Today I installed the module K
If you find one of those ore amps, let me know where I can get one. I
have some gold I'd like to amplify.
;o)
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Fri, 17 May 2013 16:42:01 -0400, Jack Berry
wrote:
>Has there been any information of
are both setting idle now until I begin
to get serious about DXCC on 160m and 80m CW this fall.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sun, 12 May 2013 20:42:39 +0100, Stephen Prior
wrote:
>Bill,
>
>I suspect it has more to do with the defa
I just received my Pignology remote tuning knob for my K3 this week. I
am very happy with it and looking forward to
using it for contest. Nick from Pignology has been great to work with.
73 de Tom AA9A
__
Elecraft mailing list
Home
Working as expected here.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Thu, 09 May 2013 14:02:53 -0500, WO0W wrote:
>The new utility for the K-3, Windows7,fails to Save Configuration. It
>begins, shows most of a "thermometer" display, sto
Downloaded and installed this morning.
I see no problems, and yes I saw the hmcu0467b.hex, but I'm not a bit
worried about it. My machine and rig working great on my wonderful
Win 7.0 Pro SP1 machine.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
Let&#x
Kevin,
How about "Elecraft CW Net D Day Celibration"? 06 JUNE 1944 was when
the Allied troops landed on the beaches of Normandy.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sat, 04 May 2013 18:49:38 -0700, kevinr wrote:
>Good Evening,
>
27; get through.
Any ideas
Tom
KI6NRD.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Plea
801 - 900 of 3173 matches
Mail list logo
