AT and the KPA are on the right
band when I key-down. I just need to review the docs to make sure I have the
KPA and the KAT setup to go "analog" rather than "KPA:RADIO = K3" mode.
But the 'enhanced' mode is much
.
Lesson learned.
Really make sure RF(I) is eliminated.
Really.
Eliminated.
Now, to whom should I send a complementary coffee gift card with the essential
fix... Thanks very much.
I return you now to the list for more important issues.
Thanks.
---
73, Jeff W7BRS
https://blog.w7brs.c
o handle.
Any advice on *that* would be welcomed.
HNY, Thanks.
---
73, Jeff W7BRS
https://blog.w7brs.com
On Monday, January 1st, 2024 at 4:37 PM, G4GNX wrote:
> AFAICR the manual says that if an AUX cable is connected between the KAT500
> and the radio, the KAT500 will follow any freq
W7BRS> comments in-line below.
---
73, Jeff W7BRS
https://blog.w7brs.com
On Monday, January 1st, 2024 at 1:21 PM, Andy Durbin wrote:
> "Actual Results: The ATU-500 clicks between Bypass and MAN (by "clicks", I
> mean only what I can infer from the behavior -- it
R.
For arbitrary X, Y and Z SWR levels.
Thanks. Ping directly if you need additional information.
HNY
---
73, Jeff W7BRS
https://blog.w7brs.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http:/
will persist changes and the UI does not
lock out the functions as described.
---
73, Jeff W7BRS
https://blog.w7brs.com
On Thursday, December 28th, 2023 at 9:25 AM, Andy Durbin
wrote:
> I was running ver 1.21.10.8 and the edit threshold function appears to work
> correctly.
>
tab, Operate tab,
Port tab. Command Tester tab works (sent the SN; command for serial number,
succeeded).
---
73, Jeff W7BRS
https://blog.w7brs.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
A long-shot I know, but I'm looking for a KTS1 wide-range tilt stand for an
Elecraft K1.
Will probably have to find some aftermarket substitute, but thought I'd ask for
the real thing first.
Thanks!
--
Jeff, KE9V
__
Elecra
Yep that seems to work. Yet when I plug the usb back
Up, one of the programs keys the radio transmitter. I turn the radio off and
then back
On to use one of these programs. Both programs are using the same
Com
Port.
Jeff
Sent from my iPhone
> On Jul 3, 2023, at 2:36 PM, elecraft-r
The K4 does one of two things:
* gets stuck in transmit mode. Remedy: turn off radio.
* Will not transmit when PTT or
Keyed. Remedy: None
I changed pistol grip PTT which did not corrrect problem. Need to know the fix
for this problem urgently.
Jeff
N4JDU
Sent from my iPhone
Group 4 because I haven't been emailed at all yet? I
suppose that also means my order will be filled after 4/15 at the earlies,
too---correct?
I just want to have an idea without bugging the nice folks at Elecraft if I
don't have to...
73,
Jeff, AK5B
Fr
I have 2 questions. I happen to be blind and have some great gear I just
don’t/can’t use. Used precisely 3 times. First question is where is the best
place to list my used Elecraft gear? Also, I’m having trouble learning what is
a “fair” price. I don’t want to take advantage of anyone…and I
, working
again as usual.
I'm thinking the contacts may need cleaning on the DVR/pins - but also
wondering if there's other things that I should check. I'm taking the radio
on a dxpedition soon and want everything to work
JJWilson
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help s
easy
enough to find in the email archives. :)
Hope this helps - jeff wk6i
--
Jeff Stai ~ WK6I ~ wk6i.j...@gmail.com
RTTY op at W7RN
Twisted Oak Winery ~ http://www.twistedoak.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/m
ave to
dig deeper to see what is up with Q1.
73 jeff wk6i
On Thu, Jun 10, 2021 at 3:08 PM Don Wilhelm wrote:
> Mike,
>
> Has the paint been cleared from all parts of the enclosure that contact
> the 2D connectors?
> If not, that could be reason for your observations.
>
> Yo
I am looking for any information on hooking up a P3 to the sub-receiver in a
K3S. Any help would be appreciated.
73,
Jeff, K3DUA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
hen it was done. Yike. 73 jeff wk6i
On Fri, Apr 23, 2021 at 10:11 PM Wayne Burdick wrote:
> OK, I've really dated myself now.
>
> Anyone remember "drafting"? A favorite class in high school: blueprints,
> mechanical drawings, schematics, straight edges, hand letter
As per the topic,
I'm after a 1.8KHz Filter, a 15KHz filter and a KDVR3 for my K3 at a
reasonable price please.
(Yes, I know that Inrad still sell them but I'm hoping to find something
cheaper in here)
Thanks in advance,
Jeff Cochrane VK4XA
Innisfail, Queensland
Australia
at a reasonable price? (and who are willing
to ship the items to Australia)
Thanks in advance,
Jeff Cochrane VK4XA
Innisfail, Queensland,
Australia
-
Jeff Cochrane - VK4XA
Innisfail, QLD, Australia.
K3 #3545
--
Sent from: http://elecraft.365791.n2.nabble.com
I am considering purchasing a Chamaeleon MPAS Lite and from what I gather from
advertisements they require an external wide range antenna tuner to work. I
have a kx2 with the internal tuner. I am guessing there is something beyond my
paygrade as to why this would not be sufficient? If anyone has
I have my K3 for sale. Used about 5 hours after build, for test and
calibration. Have all the manuals etc. K3-100KAT3KBPF3KFL3-400KXV3A
Perfect condition.$1500.00
Contact me offlist at:jmartin...@hushmail.com
Thanks,N7KRTJeff Martin
__
E
in the lovely center of the propagation black hole here
in the great USA.
$5400 OBO.
Those interested - kindly contact me off list to jeff at ac0c dot com
Happy Thanksgiving and this year it looks like we will have some extra
propagation on the CQ WPX CW contest this weekend as well to be thank
Hi EdI just solved a similar problem with my K3 (s/n 1900 plus all K3 upgrades)
setting up WSJTx after Windows 10 update and having to renumber COM ports that
use FTDI chip USB adapters. I could not set my usual config for CAT and PTT
(using CAT) and got a PTT ERR on the K3 which would go into
or with the
main antenna without a K4D.
Jeff
K9KLD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Elecraft will prioritize it at some point.
In the meantime, if you’re running a Kenwood rig and are contemplating adding
the KAT500/KPA500 PowerCombo… be aware that there are issues.
73, Jeff K4EI
__
Elecraft mailing list
Home: http
jet manufacturer.
Said mfr needed, for the whole lifetime of the jet in question, something
like 30 units. But since there was a contract signed, we made it.
73 jeff wk6i
On Wed, Mar 11, 2020 at 1:19 PM Alan wrote:
> My experience with lifetime buys was at HP/Agilent. They would only do
>
hi Paul - I'm sorry I completely disagree. You do the drive north to south
so you can easily pull over for every OMG view turnout without needing to
turn left. :) 73 jeff wk6i
On Tue, Jan 14, 2020 at 5:03 AM Paul Gacek via Elecraft <
elecraft@mailman.qth.net> wrote:
>
> As to
And most of the SIERRA Nevada too! 73 jeff wk6i
On Tue, Dec 10, 2019 at 3:18 PM Fred Jensen wrote:
> and most of Nevada too.
>
> 73,
> Fred ["Skip"] K6DGW
> Sparks NV DM09dn
> Washoe County
>
> On 12/10/2019 7:12 AM, Joseph Street wrote:
> > DZOTA
nd have QSK. The kits you buy don't have a volume
control, but that is simple to add.
-- Jeff aa6xa
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elec
What I find interesting is their using the government supplied scanning
equipment for free to remove any personnel alcohol, and increase their
profit margin.75$ for a 7$ bottle of wine?! Along with the sub standard
entertainment on board, bad food, etc. I avoid cruises like the plague.
73 Jeff
Try a different cruise line. Last year AMSAT had their annual meeting on a
cruise ship. Radio operation was allowed on HF VHF and UHF without any issues
from the ships officers.
73 Jeff kb2m
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
. All I
would possibly ask for is the shipping. Let me know
73 Jeff kb2m
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Geert Jan de Groot
Sent: Monday, October 14, 2019 6:00 PM
To: Elecraft Reflector
Subject: [Elecraft
Well me too
73 Jeff kb2m
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Macy monkeys
Sent: Thursday, October 10, 2019 5:32 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K$ Delivery Euope
Am I the only one
to use a PL259 for a HV run but it arced from time
to time at 4.2KV.
So at least in this shack, a PL259/SO239 is rated for well under 4KV.
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
On 9/27/19 3:14 PM, Walter Underwood wrote:
Few of us can guarantee dry air for our antenna connec
from whatever cause seems like tempting fate one step too close. Maybe
the 1500 has some internal protection - don't hear much about a lot of
switching failure on the amp. But a GDT pass through like a polyphaser
is cheap insurance.
PS: CQ WW RTTY starts tonight!!!
73/jeff/
PL259/SO239 BDV is around 4KV in dry air.
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
On 9/27/19 1:01 PM, j...@kk9a.com wrote:
5000 watts is 500 volts rms with a perfect antenna system. I suspect
that PL-259 connectors really can withstand much more than 500 volts.
Has anyone tested
Hello,
I have a K3 that just recently lost speaker audio.
No audio from the external amplified speakers I’ve been using, and nothing from
the built-in K3 speaker when the external speakers are unplugged.
Headphone audio is working fine.
Any suggestions before contacting support?
Thanks!
Jeff
er of
projects and it's excellent. The huge reverse isolation ensures that
the LO of the SDR does not feed back into the rig.
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
On 8/19/19 10:54 PM, Clark Macaulay wrote:
Looking for comments about the reissue of this amp as I'm consi
The K3/0 remote package has been sold. Thanks for all the interest.
73 Jeff kb2m
From: jeff griffin [mailto:k...@arrl.net]
Sent: Sunday, July 28, 2019 5:42 PM
To: 'Elecraft'
Cc: 'elecraft...@groups.io'
Subject: K3/0 complete remote system for sale
I have in
. Pictures available if
needed. $975 for the package shipped insured CONUS. Will ship offshore, but
shipping will be extra, pre paid.
73 Jeff kb2m
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
er want to build a separate thing
just for one pretty expensive radio when they could just build the app for
linux or windows and support everyone.
Maybe they have some trick to make app onboarding easy.
My 2 cents
Jeff N6SDR
>> On Mon, Jun 3, 2019, 5:45 PM Lynn W. Taylor
see how this
shakes out before commiting which means I cant be the first one with the
radio.
Jeff N5SDR
On Mon, Jun 3, 2019, 4:04 PM Jeff Scaparra wrote:
> I believe these are all good points that elecraft should consider. As for
> myself I am a tinker-er and as such i can imagine many th
d
would be willing to be responsible for the security of the system if I did
so. I know there will be many who just want a good radio to operate and
that is why I am suggesting that maybe this is a opt into thing with the
caveat that if you unlock this your responsible to keep the radio secure.
Is there a fan mod other than a firmware upgrade?
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
On 6/3/19 10:14 AM, Dan Atchison via Elecraft wrote:
I have all of the KPA1500 fan mods and firmware upgrades and they make
the amplifier so much quieter.?? Good job, Elecraft.
What I would
Jeff,
Just checking things I have forgotten in the past.
You do have the mode set to Data and the Data sub-mode set to Data A
correct?
73,
Mark, WB9CIF
Yup.
-Original Message-
From: HB [mailto:h...@optilink.us]
Sent: Saturday, June 1, 2019 12:56 PM
To: jeff griffin
Cc: Elecraft
Subject
?
Thanks for reading..
73 Jeff kb2m
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
tps://www.amazon.com/Monitor-Computer-Display-Security-Speaker/dp/B0779PM23K/ref=sr_1_8?keywords=12v+hdmi+monitor&qid=1559195100&s=gateway&sr=8-8
).
Jeff N5SDR.
On Thu, May 30, 2019 at 12:33 AM Bill Frantz wrote:
> I think it was Eric who said, in one of the recorded interviews,
&
to
"unlock" the radio to really exploit these features. In my opinion that is
one of the appeals for the MB-1 but the price, lack of diversity, and the
fact that it uses windows i think has turned a lot of people off.
Jeff N5SDR.
On Wed, May 29, 2019 at 5:29 PM M. George
wrote:
> Hi
Comparing a 24 bit ADC at a 32 KHz sample rate to a 16 Bit ADC at 122 Msps
and saying it is less bits and therefore will have worse performance isn't
a great comparison. The high speed ADC would be highly oversampling the
signal at the second IF. This allows the ADC to use some neat tricks to
effec
right open. Another time I pulled
into a parking structure while wrapping up a UHF QSO (short antenna) and
set off every car alarm on the floor. Good times. Hopefully improvements
have been made since then. 73 jeff wk6i
On Mon, May 6, 2019 at 10:12 AM Ken Winterling wrote:
> I believe al
m: Ron D'Eau Claire
> Date: 11/15/17 8:09 PM (GMT-08:00)
> To: 'Jeff Herr' , 'Wayne Burdick'
> Cc: elecraft@mailman.qth.net
> Subject: RE: [Elecraft] Beep
>
> SW TONE won't silence it?
>
> From page 65 of the KX3 Owner's manual:
I recommend Paul - WB2HHH
Super intelligent and super helpful to all hams needing help with Elecraft and
all aspects of the hobby!
Jeff
K2SDR
> On Mar 12, 2019, at 3:52 PM, 'hawley, charles j jr' c-haw...@illinois.edu
> [KX3] wrote:
>
> I am going to recommend Mike
Sent from my iPhone I am considering buying the KX two radio. I am blind and
need to find out what software I can get that has a voice synthesizer to help
me navigate this radio. Any ideas? I am an Apple iPhone and iPad user
__
Elecra
any insight…
73, Jeff K4EI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
Does anyone have one of these in working condition that would like to sell ?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Thi
Hey Wayne - I thought you might be sharing a chili n beans recipe with that
subject line! If you ever need more of a WFD challenge, the Sierra Nevada
is here for you. :D 73 jeff wk6i
On Tue, Jan 29, 2019 at 5:49 PM Wayne Burdick wrote:
> The "winter" weather in California over th
hi Don - Indeed. I had a line in there about being mindful of bluetooth
delays but it somehow disappeared. ;) 73 jeff wk6i
On Sun, Dec 30, 2018 at 12:55 PM Don Wilhelm wrote:
> Jeff,
>
> Concept is good, but ignores the latency problem with Bluetooth. I
> think that would be a
extension,
however. 73 jeff wk6i
On Sun, Dec 30, 2018 at 11:16 AM Doug Millar wrote:
> Hi Jeff, Good ideas all around. Of course i was thinking of the KX2 and a
> tablet. I actually went portable in the with that setup. What I didn't like
> was all the wires and the USB box. If I could g
this unit could have enough oomph for future digi modes.
If it was a solder kit I'd probably be in for one. 5-10W with an option for
more watts sounds okay for that.
Or just port WSJT-X to a tablet computer and use it with a KX2. ;) 73 and
happy new year - jeff wk6i
On Sat, Dec 29, 2018
that doesn't sound like it
would be the problem.
73 jeff wk6i
On Mon, Oct 1, 2018 at 8:49 AM, Mike Greenway wrote:
> I have used for years a K3 on EME with WSJT using Line In/Out audio.
> Recently got a K3S and I am now using USB (CODEC) audio in and out of the
> radio. In WSJT-1
everything that matters periodically to an external drive (set up a
calendar reminder). That software is free.
73 jeff wk6i
On Sat, Sep 29, 2018 at 12:24 PM, Bill wrote:
> I run Windows 10 and Linux Mint. I back up data daily to a USB-3 fast
> thumb drive (by simple copying of specific dire
Loaded up the beta firmware today. The PTT (key line) was dead after
that. Reloading 1.64 and all was functional again.
What am I overlooking?
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
__
Elecraft mailing list
Home: http
Odds are not good there. The antennas have a balun at the feedpoint,
are on a tower 500 feet from the shack and the hardline runs under
ground. If there is common mode involved, it's some sort of new
hyper-super-ultra-infina-deluxe type never before discovered on earth.
73/jeff/ac0c
an speed 3+ was not needed. 1&2 are in a completely
different sound category compared to the 3+ which sound like my
company's computer server room. ha ha.
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
On 18-Aug-18 12:11 AM, Bill Stravinsky via Elecraft wrote:
I noticed t
.
Normal?
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
lly which are definitely not going to be completely
flat. And there is some compression that gets to be easily measurable
once you hit about the KW level. And temp. And who knows what else.
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
On 15-Aug-18 10:18 PM, Paul Baldock wrote:
Are you
The Yaesu 9000D indeed had two identical receivers..
73 Jeff kb2m
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe Subich, W4TV
Sent: Wednesday, August 15, 2018 1:29 PM
To: Elecraft
Subject: Re: [Elecraft] K3
FTdx9000
I'm thinking the Yaesu 9000D was first with identical receivers...
73 Jeff kb2m
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Wednesday, August 15, 2018 9:03 AM
To: elecraft@mailman.qth.net
Subjec
ed to FAN1 which tends to have some sort of a sequel-type note to
the sound it makes.
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
On 10-Aug-18 1:26 PM, Jim Brown wrote:
This is an excellent post, and I agree with all of it.
I will add that acoustic considerations also STRONGLY affect
radio operator?" She said, "No. That's me. Kate White."
73 jeff wk6i
On Mon, Jul 16, 2018 at 10:41 AM, Jim - N4ST wrote:
> Years ago, during the 70's gas rationing in Maryland, I found I could get
> gas on either odd or even days with my AA3O license plate.
> __
the standard cable is not Cat5, it's just a ribbon cable with RJ45's (I
think?) at each end.
Cat5 should work, though, and I'd be surprised if anything less than ~50ft+
would be an issue.
--
Jeff KC9WSJ
On Mon, 2018-07-09 at 23:51 -0400, Dick Green wrote:
> The W2 wattmeter c
damaging the radio remains
the overarching priority.
Any suggestions?
73, Jeff K4YWZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
To clarify - by "side" i mean the side that you would call the left or
right side of the case - that is what i'm considering to have down. Not
the face or back. Just rotating the amp 90 deg.
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
On 08-Jul-18 6:22 PM, Daue
Can the KPA1500 and power supply be mounted on it's side?
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
I was just hearing someone on 50.145, not solid but some words. Then he signed
and seems dead now.
Sent from my iPhone
> On Jul 7, 2018, at 16:38, William Johnson wrjohnso...@hotmail.com [KX3]
> wrote:
>
> KX3 is in permanent 6M monitoring mode and ready!
>
>
>
> 72 & 73,
>
> Bill
>
>
Or how about K3Pro with benefits :-)
73 Jeff kb2m
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Fred Jensen
Sent: Wednesday, June 27, 2018 7:13 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] factory
That's true. Especially when you let stuff sit for 6 months between uses. I
need to get more of those covers
73 Jeff kb2m
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Clay Autery
Sent: Sunday, June 3, 2018 2:
this
farther, I'm not going to dissect the connectors on the old jumpers, I'm
just going to throw them out. I have better things to do with my time :-)
73 Jeff kb2m
-Original Message-
From: Bob McGraw K4TAX [mailto:rmcg...@blomand.net]
Sent: Sunday, June 3, 2018 1:52 PM
To:
thing up
and the problem is now fixed. I then tried the jumper cables I replaced one
at a time and the problem didn't return. Go figure. So I put the new LMR-240
jumpers back on and life is once again good in kb2mland...
73 Jeff kb2m
-Original Message-
From: elecraft-boun...@mailm
Hi Jack. The swr is so different between the two that there has to be a
problem. I've had this setup for 3 years and never experienced this
behavior.
73 Jedff kb2m
-Original Message-
From: Jack Brindle [mailto:jackbrin...@me.com]
Sent: Saturday, June 2, 2018 4:47 PM
To: jeff griff
Thanks for the reply Don. Tried that and didn't work, still have the SWR issue.
Tried the amp on a resonant frequency, and it still is showing a bad SWR, but
not bad enough to always fault.
73 Jeff kb2m
-Original Message-
From: Don Wilhelm [mailto:donw...@embarqmail.com]
ces in use, I also did a reset of
the KAT's stored frequencies memory, and checked both the amp and tuner with
the utility programs. I'm going to call Elecraft on Monday, anyone have any
ideas in the meantime I ca
Also he did say that the JA gave him a -24 signal report. That doesn't sound
like he's melting anybody's receive antennas with the 800 watts :-)
73 Jeff kb2m
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf
That's what I was wondering...is it the AX1 or something different?
On Sun, May 20, 2018 at 8:08 PM, rich hurd WC3T wrote:
> You mean the AX1? :)
>
> On Sun, May 20, 2018 at 18:54 Wayne Burdick wrote:
>>
>> Stay tuned :)
>>
>> Wayne
>> N6KR
>>
What's this I read about an Elecraft portable antenna at Dayton?
#curious.
73 de N6GQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qt
.
I’d be interested in any thoughts anyone has on the thermal relationships at
play here.
73, Jeff K4YWZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Thanks for all the suggestions. Batteries ordered and on the way.
Much appreciated!
73, Jeff KE9V
On Wed, May 9, 2018 at 10:51 AM Walter Underwood
wrote:
> Yes, Eneloop Pro.
>
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
>
It's time to initiate the three-month old KX3 into the great outside.
Recommendations for internal batteries appreciated.
Thanks.
73, Jeff KE9V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
corruption of the flash memory channel). Albeit,
a freshly-recorded message will sometimes play the complete message a time or
two before it begins to truncate subsequent playbacks.
MCU 2.90
DSP 01.52
Any thoughts?
73, Jeff K4YWZ
I have Sad News to report this week,
We lost Wd8kni Fred Moore on Tuesday the 17th he was a Great Friend and will be
missed by all.
W4TEK
Jeff K
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
I know Elecraft does not recommend bringing in a KPA3 from a K3 to a new K3S,
but has anyone done this and how does the rig perform?
Sent from my iPad
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/lis
WW this weekend.
73,
Jeff, NH7RO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Plea
Just wondering if the low power K3S kit with extra filters etc is offered as a
special?
Seems they usually have the 100W factory combos.
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecra
Curious what others are using for a USB interface from the KX3 to the
MacBook Pro with all USB-C ports.
73, Jeff KE9V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
What I would like to see is a dual band module for the KX3 that would provide
all mode 2 and 70cm. That is what I miss with the 817. I built a compressor
board that fit in the case, but I like the tuner and extra power of the KX3 for
HF and 6.
Sent from my iPhone
> On Mar 1, 2018, at 17:24, J
ld K3 that works OK on
RX but has an inoperative TX. I guess the ideal config would be the AM
filter, general coverage RX and a broken TX section.
If you have something like that on your shelf and it needs a new home,
please contact me directly (off the reflector).
73/jeff/ac0c
alpha-ch
a get another K2-level kit? :) 73 jeff wk6i
--
Jeff Stai ~ wk6i.j...@gmail.com
Twisted Oak Winery ~ http://www.twistedoak.com/
Facebook ~ http://www.facebook.com/twistedoak
RTTY op at W7RN
__
Elecraft mailing list
Home: http://mailman.qt
On Sun, Jan 14, 2018 at 3:51 PM, John Klewer wrote:
> I wonder if I could sell one of my children and buy one?
>
> Nah
>
> Oh Well
>
>
Oh come on, I know some of your kids and they would fetch top dollar. ;) 73
jeff wk6i
--
Jeff Stai ~ wk6i.j...@gmail.com
Twis
We all can look forward to the 7610PRO, whatever that means. What an
unbelievable amount of hype proceeded the release of this transceiver...
73 Jeff kb2m
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike VE3YF
Sent
1 - 100 of 1041 matches
Mail list logo