If there is a way to do this already please excuse the request.
Radio without 2nd receiver
When working split it would be nice to display your transmit frequency. Say
you have 21.295 for VFO A receiving K5D and VFO B at 21.305 for transmit.
While I see the TX arrow on B it would be nice to see t
Hi Mike,
When working split it would be nice to display your transmit frequency.
While in SPLIT mode, I see the TX frequency (VFO B) displayed
in the VFO B window, with a TX-labeled arrow pointing at B.
Say you have 21.295 for VFO A receiving K5D and VFO B at 21.305 for
transmit
What do you elecrafters think about this:
1. When you are running SPLIT ( assuming RIT & XIT are OFF), tapping CLR
puts the RX-VFO to the same frequency as the TX-VFO (TX). No one would
run SPLIT and use RIT and/or XIT simultaneously, would you?
2. Or, even better: When you are running SPLIT, tap
3 Main features I would to see.
1 A via out put on the main k3 or a way to integrate the k3 lcd out into the p3
so you could adjust the filter on the large screen.
2 Voice button feed back like the smaller kx3 has.
3 an rather net jack for direct internet remote control.
Thanks Charles
__
Just playing with a borrowed KX3 and noticed a nice feature on the AFX MD.
You can select off, delay and pitch. Any chance pitch could be added to the
K3? In effect the pitch of CW stations maps from left to right.
BTW my P3 does a lot of freezing.
Thanks,
Mike W9RE
__
Since so many are asking for features I'll add one I really want. I'd like to
have a few control lines I can play with.
We already have DIGOUT 1 but would like to have more that I can use.
Some I can do with Band decoders but there are times like 2 meters where I
want to switch between antennas
I'm losing track here. Am I correct in understanding:
1. SSB Sidetone required when wearing headphones.
2. SSB Sidetone not required when headphones are unplugged and listening
to speaker.
3. SSB Sidetone automatically zeroed upon unplugging headphones.
4. Headphones are just that, not a hea
Greetings!
I hope this is the place to suggest new features.
I’d love to see a variable ‘course’ tuning of the VFO based on the speed it is
tuned. For example, if I’m in the CW band and want to move to SSB I’d like to
simply tune quicker than usual and have the VFO switch to course tuning unti
*/I would like to see Band Stacking Register using the Band buttons on
the amp's
Regards
Art
ka9zap
/*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:El
Currently, the K3 allows transverter IF's of 50, 28, 21 and 7 MHz. When
running a large multiop that uses transverters for all bands, care must be
taken to keep IF's away from each other to avoid QRMing your own stations.
Since almost all the commercially available transverters use a 28 MHz IF,
you
man.qth.net] On Behalf Of Ken Kopp
Sent: Sunday, February 15, 2009 3:41 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Feature request
Hi Mike,
When working split it would be nice to display your transmit frequency.
While in SPLIT mode, I see the TX frequency (VFO B) displayed
Kopp'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Feature request
Having the actual transmit freq PROMINENTLY displayed when you transmit on
CW with the decoder working would be a nice confirmation that you are indeed
xmitting where you think you are (split or not) - just listen to the K5D
I agree!
Gary
Vk4wt.
Sent via BlackBerry® from Telstra
-Original Message-
From: "Bob Serwy"
Date: Sun, 15 Feb 2009 16:18:42
To:
Subject: Re: [Elecraft] Feature request
I for one would not like this change. I have this on my Icoms and never
liked it.
Bob Se
-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken Kopp
Sent: Sunday, February 15, 2009 1:41 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Feature request
Hi Mike,
When working split it would be nice to display your transmit frequency.
On Sun, 15 Feb 2009 12:56:47 -0700
"W0MU Mike Fatchett" wrote:
> If there is a way to do this already please excuse the request.
>
> Radio without 2nd receiver
>
> When working split it would be nice to display your transmit frequency. Say
> you have 21.295 for VFO A receiving K5D and VFO B a
W0MU Mike Fatchett wrote:
>
> If there is a way to do this already please excuse the request.
>
> Radio without 2nd receiver
>
> When working split it would be nice to display your transmit frequency.
> Say
> you have 21.295 for VFO A receiving K5D and VFO B at 21.305 for transmit.
> While I
al Message-
From: JIM DAVIS [mailto:nn...@astound.net]
Sent: Sunday, February 15, 2009 4:19 PM
To: W0MU Mike Fatchett; elecraft@mailman.qth.net
Subject: Re:Re: [Elecraft] Feature request
On Sun, 15 Feb 2009 12:56:47 -0700
"W0MU Mike Fatchett" wrote:
> If there is a way to do this
> Having the actual transmit freq PROMINENTLY displayed when you transmit on
> CW with the decoder working would be a nice confirmation that you are indeed
> xmitting where you think you are (split or not) - just listen to the K5D
> xmit freq - looks like lots of folks need lots of reminders of ju
Merv,
As the ads for a popular brand sauce mix say "its already in there".
Check your CONFIG menu setting for SPLIT SV. When set to NO, the split
is lost when changing bands, but if set to YES, the settings for SPLIT,
RIT, and XIT are saved on a per-band basis.
Per-band means that the settings
Having a "quick split" feature would be great! My IC-7800 has that, and I
miss it on the K3. Hold split, enter the "up" split frequency (up 1, up 5,
etc.) and the seconnd VFO is there. No counting or adding.
Lou, W0FK
W0MU Mike Fatchett wrote:
>
>
> <>
>
> Yaesu has a feature called quick s
W0FK wrote:
>
>Having a "quick split" feature would be great! My IC-7800 has that, and
>I miss it on the K3. Hold split, enter the "up" split frequency (up 1,
>up 5, etc.) and the seconnd VFO is there. No counting or adding.
>
"Quick split" - otherwise known as "auto split" or "pileup split" - i
> "Quick split" - otherwise known as "auto split" or "pileup split" - is
> an option that has been available in serious transceivers for almost
> twenty years.
>
> If this option was available and selected, then holding SPLIT would
> automate the following sequence which presently has to be done ma
Ian GM3SEK wrote:
"Quick split" - otherwise known as "auto split" or "pileup split" - is
an option that has been available in serious transceivers for almost
twenty years.
Make that forty or so Ian if homebrewed rigs count :-)
When using multiple offset "auto split" I find it useful to have the
M3SEK
Sent: Monday, February 16, 2009 1:28 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Feature request
W0FK wrote:
>
>Having a "quick split" feature would be great! My IC-7800 has that, and
>I miss it on the K3. Hold split, enter the "up" split frequency (up
th.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ian
> White GM3SEK
> Sent: Monday, February 16, 2009 3:28 AM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Feature request
>
>
> W0FK wrote:
> >
> >Having a "quick split" featu
t;Joe Subich, W4TV"
To: "'Ian White GM3SEK'" ;
Sent: Monday, February 16, 2009 11:17 AM
Subject: Re: [Elecraft] Feature request
>
> I have to disagree ... quick split would cause too may
> other problems like losing the frequency if one has
> already set VFO B (s
16, 2009 10:45 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Feature request
I've got to go along with Joe on this. The way I do split on an FT2000 now
and all the radios I've used in the past is to set VFO B to VFO A's
frequency (the DX frequency), select SPLIT, put VFO B&#x
Joe Subich, W4TV wrote:
>
>I have to disagree ... quick split would cause too may
>other problems like losing the frequency if one has
>already set VFO B (subreciever) to the desired place.
>
>Except for actions explicitly designed to change frequency
>(tune the VFO, change band, recall a memory, e
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ian White GM3SEK
Sent: Monday, February 16, 2009 3:34 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Feature request
Joe Subich, W4TV wrote:
>
>I have to disagree ... quick split would cause too may ot
: Mon, 19 Oct 2009 23:11:41 +0200
> Subject: [Elecraft] Feature request
>
> What do you elecrafters think about this:
>
> 1. When you are running SPLIT ( assuming RIT & XIT are OFF), tapping CLR
> puts the RX-VFO to the same frequency as the TX-VFO (TX). No one would
> run SPLIT
DM4iM wrote:
>> Actually Martin, I do use the RIT with the Split mode
>>
>
> Ok, so what about this
With the next beta release, K3 users will be able to customize SPLIT
operation, as well as many other functions. For example, you'll be
able to define a single switch tap or hold that
Yeah, I've envied KX3 users this feature too. Would be nice.
And I still have occasional P3 freezes although the latest firmware
version is better than the previous one.
On 11 Feb 2015 17:45, Mike Wetzel wrote:
Just playing with a borrowed KX3 and noticed a nice feature on the AFX MD.
You can
On 08/04/17 18:58, Mike Harris wrote:
> I'm losing track here. Am I correct in understanding:
>
> 1. SSB Sidetone required when wearing headphones.
>
> 2. SSB Sidetone not required when headphones are unplugged and listening
> to speaker.
>
> 3. SSB Sidetone automatically zeroed upon unplugging
Noted, thanks.
Mike VP8NO
On 08/04/2017 15:12, Richard Lamont wrote:
On 08/04/17 18:58, Mike Harris wrote:
I'm losing track here. Am I correct in understanding:
1. SSB Sidetone required when wearing headphones.
2. SSB Sidetone not required when headphones are unplugged and listening
to speak
Hi Dave,
Yes this is the place and that's a great idea. It's called ballistic tuning.
I think it ultimately became the feature that makes the RIT dial a rapid
tuning dial. Check out the 2009 e-mail from Wayne that I pasted below. Maybe
Wayne will update his earlier comment.
73,
Mike K2MK
On May
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
I need to use 24 MHz as an I.F. frequency for a transverter. In the XV config,
the only I.F. choices are 21, 28 and 50. Any chance 24 could be added? I could
use high power 24 MHz with an attenuator but I need to operate at 24.! Mhz
which gives an out of band message.
HNY to all the good fol
Hello Elecraft,
Would it be possible for Elecraft to add the following feature to the
P3:
Allow P3 macros to be stored and triggered via the USB keyboard port on
the rear of the P3, as is currently being implemented now for the K3
macros.
In essence, I want the P3 to let me fire a P3 macro trigg
I find the P3 monitor a useful addition to my station and I believe that it
would be even more useful if the horizontal timebase could be extended. It has
a current maximum of 100mS which is fine for all but slow transmission modes
where a more extended time - perhaps 200mS or longer would be b
Device: P3
Requested new feature:
The ability to build and test a macro, assign it a memory number within
the P3, and then upload this macro to the P3 directly out of the P3
Utility software.
Reason for request:
The macro capability of the K3/P3 seems very underused. In general it
is an en
Consider one of the settings for your computer mouse is shifting
resolution. This allows you to move the mouse real fast to get from one end
of three monitors to the other. And then, when you slow down, the mouse
goes into micro-resolution mode and you can be very precise in your
movements. This ma
: Elecraft Reflector Reflector
Subject: [Elecraft] Feature Request: Shifting VFO
Consider one of the settings for your computer mouse is shifting resolution.
This allows you to move the mouse real fast to get from one end of three
monitors to the other. And then, when you slow down, the mouse goes
Kev and all,
No vote on that dynamic VFO tuning for me. It would only be suitable
for me if I could turn it off.
I have used a couple transceivers that had that type of tuning and it
drove me nuts.
73,
Don W3FPR
On 7/20/2019 1:38 PM, Kevin, N4TT wrote:
Consider one of the settings for your
I agree with Don. The K3/K3S already supports three tuning rates
depending on the operation of the Fine/Coarse control (HOLD/Coarse =
100 Hz/step, Fine = 10 Hz/step, Double tap Fine = 1 Hz/step). In
addition, MENU:VFO CRS will select 1 KHz or 10 Hz/step and MENU:VFO
CTS will select 100/200/400
I agree with Don and Joe. One of my radios some 10 years ago had the
feature. It could be turned on or off. Yet some really didn't like it
and some thought it was the best thing since sliced bread. To me, my
K3S in its present configuration fits ALL of my needs.
73
Bob, K4TAX
On 7/20
And yet I find it a valuable feature on my other radios. It takes some
serious intent to get the tuning rate to shift. Sensitivity can be
adjustable and the increment value as well. I personally find it
annoying to have to keep hitting a button to change the tuning rate. It
would be quite easy
Is it a feature of ICOMs?
Neat as QSY to a far away frequency can be done without pressing any extra
button.
On the other hand, band-segment memories and clicking on spots makes
long-range QSYing less important.
Ignacy, NO9E
--
Sent from: http://elecraft.365791.n2.nabble.com/
___
A scenario from yesterday's contest.
I have the P3 set up to view about 3 or more KHz of spectrum. I use a K-pod
to run my way up from low to high. I like the FINE setting to get that
signal right where I want it but would like a course transition up to that
signal. I could push a button to turn o
Kev,
Since you use the K-Pod, why don't you set CONFIG:VFO OFS to ON, and
then set CONFIG:VFO CRS for whatever Coarse setting you want (that is a
per mode setting).
Then on the K-Pod, when you want a fast QSY, just flip the bottom switch
to the RIT position and move the knob with the coarse
I had an Yaesu satellite-capable HF/VHF/UHF radio for quite
awhile [FT-847??] that had a spring-loaded ring around the main tuning
knob that would QSY faster the more you turned it. Yaesu called it the
"Jog Ring" or something like that. Despite how good the concept sounds,
I found it worse
Inrad had a mod about 20 years ago for the FT-1000/D which they called a
"Tuning Upgrader" that provided a slower tuning rate than stock when you
turned the main knob slower, restored the stock tuning rate when you
turned the knob faster, and a higher tuning rate (25 KHz) when you spun
the knob
There is a similar computer feature called “mouse acceleration”. It has been
around for at least 20 years and people still haven’t agreed on whether it is a
good or bad thing.
wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)
> On Jul 21, 2019, at 7:50 AM, Ignacy w
KPOD macros could stitch together 50 kHz with of UPn;UPn; or DNn or use direct
frequency entry with FA for the bottom of the phone and CW band segments for a
few bands.
What I do in contests is type a frequency into the callsign input area of N1MM;
the hands stay on the keyboard. I also sometim
I think the P3 center mode has this feature.
73 Bill AE6JV
On 7/20/19 at 10:38 AM, kkinde...@gmail.com (Kevin, N4TT) wrote:
> Consider one of the settings for your computer mouse is shifting
> resolution. This allows you to move the mouse real fast to get from one end
> of three monitors to the
t: Re: [Elecraft] Feature Request: Shifting VFO
Kev and all,
No vote on that dynamic VFO tuning for me. It would only be suitable for me
if I could turn it off.
I have used a couple transceivers that had that type of tuning and it drove
me nuts.
73,
Don W3FPR
On 7/20/2019 1:38 PM, Kevin, N4TT
Wayne, et al.,
It would be great if, in addition to the HAND option for CW keys, there was
a BUG option where repeated dits are generated if the dit paddle is held but
the dahs are manual, just like a bug. This would allow users who primarily
use a bug to more easily go portable with the KXPD3.
Are you sure about this? Mine does work - it would be impossible to operate
VHF without it. The PTT I use is on the front panel wired to a footswitch
and it does work in CW mode.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Feature-request-CW-PTT-tp5871428p5871759.html
Hi Chris,
The Key output works as it should do, there is no output from it at all as
such. What it does do is in the transmit mode it will "sink" up to 200 volts
at 5 amps, so in other words if you have a 24 volt relay with one side of
the relay is connected to +24V and the other side connected t
I understand the explaination as the PTT acting illogical. And yes, no other
rigs act like this. I believe this is a carry over from several years ago when
an update was made that fixed an issue that even in PTT mode, if the key was
hit it would actually transmit. Now at least it doesn't transmi
All understood Chris,
The trouble is I don't know any different as all my previous rigs were home
brew
Now I've reread your posts it's all fallen into place.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Feature-request-CW-PTT-tp5871428p5872464.html
Sent from the [K3]
Dear Elecraft,
I also would like to again add my request for an option to implement a
'quick split' feature option in the K3.
Once you have used it, it is hard not to have it available.
I am surprised that such has not been added seeing the numerous requests
that have surfaced over the past y
Hello All
Im playing around with the macros and trying to see if i could control the VFO
with the keyboard
(left right arrows maybe)
Anyone successful with this using the PX3 Keyboard?
George NE2I
__
Elecraft mailing list
Home: http
Hi elecraft team, hi list,
I'm thinking again on improvements for SO2V operation using a K3 with
sub RX.
In my opinion operating will be much smoother if TX on 2nd VFO is possible.
I do know it is technical not possible to transmit on the frequency of
the sub RX if it is on a different band.
Hi folks,
As the subject suggests, I'd like to put in a feature request, for a
simple, command line firmware updater tool, for all applicable Elecraft
rigs. To update the firmware on my KX3 and PX3, I need to download and set
up two separate programs, most of whose functionality I won't ever need.
ot;feel".
73, Ron AC7AC
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of K7MJG
Sent: Saturday, June 01, 2013 7:58 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Feature request - CW KEY1 & KEY2
Wayne, et al.,
It would be
Probably heresy, but there are non-Elecraft solutions to a few ham
situations. Lots of very tiny memory keyers are available that have a
bug mode.
Jackson Harbor's tiny PK-4 memory keyer (1x1.5") is one. It is also
packaged by Palm as the Code Cube to plug into the back of a Palm
paddle. Also
> Jackson Harbor's tiny PK-4 memory keyer (1x1.5") is one.
As are any WinKey based device.
73,
... Joe, W4TV
On 6/1/2013 1:23 PM, EricJ wrote:
Probably heresy, but there are non-Elecraft solutions to a few ham
situations. Lots of very tiny memory keyers are available that have a
bug mode
On 06/01/2013 01:23 PM, EricJ wrote:
Probably heresy, but there are non-Elecraft solutions to a few ham
situations. Lots of very tiny memory keyers are available that have a
bug mode.
Jackson Harbor's tiny PK-4 memory keyer (1x1.5") is one. It is also
packaged by Palm as the Code Cube to plug in
Hi George,
You bet you can control the VFO with the PX3 keyboard. Here's what I have
set up on my PX3:
I use the UP/Down, Ctrl-Up/Down, Left/Right and Ctrl-Left/Right. I have
the up/down keys adjust the frequency by 1 Hz, Ctrl-up/down by 10 Hz,
Right/Left arrow by 100 Hz and Ctrl-Right/Left
I made a mistake, to adjust by 1 Hz it's UP0; and DN0;
-Paul
--
View this message in context:
http://elecraft.365791.n2.nabble.com/feature-request-PX3-keyboard-VFO-control-tp7610210p7610216.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Hi George,
They have a piece of sample code to do what I think you want to do at
the bottom of page 6 of the K2s & K3 & KX3 Programmers Reference
document. You can download the PDF file from the Elecraft website:
http://www.elecraft.com/K2_Manual_Download_Page.htm#KX3
73,
Ken Alexander
VE3H
And the BN commands must be 2 digits. (I just added those) So 160 meters is
BN00; and so on.
Also, you can set up a macro to turn both the KX3 and PX3 off with one
button push on the PX3 front panel. First program a macro using one of the
first 8 memory locations with the following:
PS0;#PS0;
Hello Paul,
just let everything drop and write a "Px3 Macros for Dummies". I know that
you can do it and it would be a great help for the rest of the folks who
try but do not succeed.
73 de
Hajo (DL1SDZ)
---
Cela est bien dit, ...,mais il fault cultiver notre jardin.
Am 11.11.2015 01:57 schrieb
Hello all
I thank you for all the help. I programmed it and it worked great. The only
thing that didn’t seem
to work is the band switching. maybe its my keyboard. I don’t know.
The power button is most convenient. I love it!
Any other goodies?
George NE2I
On Nov 10, 2015, at 7:57 PM, Paul Sa
HI George,
I made a mistake on the band switching. The "BN" command takes a 2
digit argument. For example to change to 160 meters, use BN00;
I have my keypad now set up for 160 through 10 meters and it works
really good. At this rate I may need to allocate more room for more
macros/text mess
Would it be possible in software to add an audio balance control?
As time has gone by my left ear takes a lot more drive to match the right and
it's probably going to get worse.
In my best of all worlds it would be great to set an Eq curve individually too.
Tnx
Mike Keller
W1BNC
___
Olli,
I think something like that would add confusion to the user interface.
In other words, you have a unique situation that is only applicable if
split is on a different band, but the display will not reflect the
status of the normal RX and TX parameters when in split.
73,
Don W3FPR
On 1/1
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don
Wilhelm
Sent: 16 January 2016 14:18
To: Oliver Großmann; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Feature Request: SPLIT on different bands
Olli,
I think something like that would add confusion to the
Olli,
this is more confusion to "the normal guy" than just pressing A/B once,
do the QSO, and get back with another A/B button press. I do it all the
time when SO2V'ing on different bands, works like a charme. We should
take care not to over complicate things on an already very feature rich
r
But perhaps you could write your own updating
utility, Bruce. While I have an RPi2 running
Linux, etc. I'm very happy with the OS-dependent
utilities we have now. Likely a command line
utility would not be as capable and could cause
problems if the command line was not just so.
73, Phil W7OX
If the firmware update commands were documented, I would already have done
so, but they don't appear to be. I assume they are the "reserved" commands
listed in the programmers references.
On Sun, Mar 27, 2016, 18:58 Phil Wheeler wrote:
> But perhaps you could write your own updating
> utility, B
Hi Elecraft folks,
I use the ATU on my KX3 all the time with portable antennas, but my home
antennas, where I'll be using my KXPA100, are all resonant (mag loops). To
get a second antenna outlet I have to cough up $380 and install the tuner,
which is quite a bit of money for something I mostly won
Hi,
Would it be possible on the KXPA100/KX3 combo (and K3*) to allow the ATU
mode to be memorized per antenna? I have a small transmitting loop that is
remotely tuned on ANT1 so wish to run with the ATU in bypass, but ANT2 is a
EFHW which I like to have the tuner active (manual mode) for. I am war
Please can we have an option to disable break in. I nearly killed my
microwave transverter tonight because of break in when I pressed the memory
key button by mistake. CW QSK is too fast for and defeats the sequencing of
the transverter.
Mike
--
View this message in context:
http://elecraft.3
Hello,
it would be nice to have RX EQ by mode. Separate adjustment for CW
cutting the passband >800 Hz eliminates the fatigue from noise but is
rather impractical while (casually) operating SSB...
73,
Martin, OK1RR
K3 #7554
KPA500 #1565
KAT500 #849
P3 #2752
___
Hello,
On power up, and at the switch to a new band, the AF/RF knob controls AF. I
can press the knob to control the RF level. As a matter of operating style
to reduce noise, I *always* set the AF to 60 (the max) and then use RF to
control listening levels. However, as I switch bands, the KX3 s
Hi,
So, beyond the fun of doing QSOs, I also listen to intermediary bands.
Sometimes however it is clear that it would be good to have the ATU tune
up. So the manual procedure I do is to go to nearest band, tune there,
and go back. This way I will not transmitt out of band, and the tuning
is
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
Mike,
CONFIG: SUB AF: bALANCE will do what you want, minus the individual EQ
curve.
Jeff, KC9WSJ
On 12/29/2015 6:10 AM, Mike Keller wrote:
Would it be possible in software to add an audio balance control?
As time has gone by my left ear takes a lot more drive to match the right and
it's prob
I think the OP was asking for main/main L/R balance control which SUB
AF will not provide
73, Barry N1EU
On Tue, Dec 29, 2015 at 9:15 AM, Jeff Schmidt wrote:
> Mike,
> CONFIG: SUB AF: bALANCE will do what you want, minus the individual EQ
> curve.
>
> Jeff, KC9WSJ
>
> On 12/29/2015 6:10 AM, Mike
Ah, could be, Barry, I'll shut up now. ;^)
For main/main balance, the first thing that comes to mind is running
line out to either a mixer (like a Behringer XENYX 302USB ~$50 on
amazon) or sound card and using the pan/balance built in to that device.
Jeff, KC9WSJ
On 12/29/2015 9:59 AM, Barr
I'm puzzled, Bruce: Why do you need an ANT2 jack
at all?
Phil W7OX
On 4/28/16 11:56 AM, Bruce Nourish wrote:
Hi Elecraft folks,
I use the ATU on my KX3 all the time with portable antennas, but my home
antennas, where I'll be using my KXPA100, are all resonant (mag loops). To
get a second ante
Multiple loops. I could buy a separate switch of course, but the KX3
integration of the KXPA is sweet.
On Thu, Apr 28, 2016, 12:12 Phil Wheeler wrote:
> I'm puzzled, Bruce: Why do you need an ANT2 jack
> at all?
>
> Phil W7OX
>
> On 4/28/16 11:56 AM, Bruce Nourish wrote:
> > Hi Elecraft folks,
>
Sounds like a simple antenna switch is your solution. Esp since you are
using mag loops which do not use a tuner. I just bought a band
decoder($75)from a lady on the group and you would need that and a remote
switch that senses band voltages. Again a lot of investment . BTW your MO
is in the mail.
Hi Elecraft folks,
Not sure how feasible it might be, but adding a mini-banana ground jack to
the KX3, just like as on the new KX2, would be a huge upgrade in my
estimation.
Thanks again, and keep innovating.
Bruce
__
Elecraft mailing l
Check the utilities for the various ATUs as I think some have this feature.
Sent from my iPhone
...nr4c. bill
> On Apr 22, 2017, at 11:28 PM, David Orman wrote:
>
> Hi,
>
> Would it be possible on the KXPA100/KX3 combo (and K3*) to allow the ATU
> mode to be memorized per antenna? I have a s
Hi Mike,
push for two second the "VOX" button (left side of band switch) will disable
break in.
Vy 73, Fausto IK4NMF
- Original Message -
From: "AD6XY"
To:
Sent: Tuesday, August 27, 2013 10:08 PM
Subject: [Elecraft] Feature request - Disable Break In on K3
Mike,
You may want to look into using TX INH on the K3 ACC connector - it does
exactly that, waits for a signal from the sequencer that TX is now OK.
73,
Don W3FPR
On 8/27/2013 4:08 PM, AD6XY wrote:
Please can we have an option to disable break in. I nearly killed my
microwave transverter to
> "AD6XY" == AD6XY writes:
AD6XY> Please can we have an option to disable break in. I nearly killed my
AD6XY> microwave transverter tonight because of break in when I pressed the
memory
AD6XY> key button by mistake. CW QSK is too fast for and defeats the
sequencing of
AD6X
I wasn't aware of that feature - but all I can get is FULL or SEMI, no "Off".
Turning off VOX to PTT still causes VOX to operate with the key - which is
surely a bug?
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Feature-request-Disable-Break-In-on-K3-tp7578303p7578312.
1 - 100 of 176 matches
Mail list logo
