keyboards.
>
> Perhaps you have misunderstood that people are not trying to complain here
> Guy, yet let the Elecraft guys know that they should look into this. That's
> why it's still BETA software at this point... Don't poo poo it so fast.
>
>
>
>&g
Hi Cookie,
I have seen that video and it is well beyond the degree of motion that
I use on the bug.
In fact, I have a Viz right-angle bug which is a lighter key and
requires a lighter touch than the typical Vibroplex. And I use it
without benefit of any epoxy, superglue, and/or anchor bolts hold
> This sounds like an identical thread from last August. Just as some
> CW keyer circuits require debouncing when using paddle contacts having
> dissimilar metals, debouncing a bug is a good idea when used in the
> CW + application.
The "dissimilar metals" issue was not one of bounce. It
uys know that they should look into this. That's why
it's still BETA software at this point... Don't poo poo it so fast.
> Date: Sat, 19 Jun 2010 12:09:31 -0400
> Subject: Re: [Elecraft] K3 Beta Firmware Rev. 4.03: "CW+" mode
> (Ultra-fastbreak-in; VOX-CW
> CW plus was made to faithfully reproduce the keying at very high speeds,
and has to take the blip seriously.
This sounds like an identical thread from last August. Just as some CW
keyer circuits require debouncing when using paddle contacts having
dissimilar metals, debouncing a bug is a good
uy Olinger K2AV
Cc: Elecraft@mailman.qth.net
Sent: Sat, June 19, 2010 11:58:02 AM
Subject: Re: [Elecraft] K3 Beta Firmware Rev. 4.03: "CW+" mode
(Ultra-fastbreak-in; VOX-CW up to 100 WPM)
I was not complaining about the K3 QSK+ or requesting that Elecraft do
anything at all about this.
I was not complaining about the K3 QSK+ or requesting that Elecraft do
anything at all about this. Merely commenting on the curious effect
(because it is the dit contact on bugs that is typically screwed up;
not the dahs).
I noted that it was a matter of technique, and I've found that I can
redu
that Tick sound on the
> dah contact, I would just not use it. Shame.
>
>
>
>
>
>> Date: Sat, 19 Jun 2010 05:37:18 -0700
>> From: drew...@verizon.net
>> To: elecraft@mailman.qth.net
>> Subject: Re: [Elecraft] K3 Beta Firmware Rev. 4.03: "CW+" m
ld just not use it. Shame.
> Date: Sat, 19 Jun 2010 05:37:18 -0700
> From: drew...@verizon.net
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3 Beta Firmware Rev. 4.03: "CW+" mode
> (Ultra-fastbreak-in; VOX-CW up to 100 WPM)
>
>
> Yes, I noti
Yes, I noticed this on my bug also. This happens almost entirely on
characters that start with a 'dah'. I think this is because the index finger
is off the paddle between characters and the initial attack is a little more
forceful. Subsequent dahs in the same character sound fine, but that first
o
Heh. The new QSK is so fast it picks up bounce on the Dah contact on my
Vibroplex, hi hi. Zowie
73,
LS
W5QD
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Beta-Firmware-Rev-3-57-Synchronous-AM-Detection-AM-S-misc-improvements-tp3983997p5180105.html
Sent from the [K
t: Re: [Elecraft] K3 Beta Firmware Rev. 4.03: "CW+" mode
(Ultra-fastbreak-in; VOX-CW up to 100 WPM)
To: elecraft@mailman.qth.net
Date: Monday, June 14, 2010, 11:15 PM
From the time of CW key closure to RF, I measure a blistering 7 ms, beating
the IC-7700 I measured by a solid 2 ms. It
4, 2010 6:53 PM
Subject: [Elecraft] K3 Beta Firmware Rev. 4.03: "CW+" mode
(Ultra-fastbreak-in; VOX-CW up to 100 WPM)
>I just finished to install beta 4.03 and the process was nice and easy,no
>problems at all,radio works as it supouse to work,now I can send 70 wpm
>with a
13 matches
Mail list logo