[Elecraft] Stick PC and Elecraft Software/Netlogger

Anyone used a Stick PC in the shack with KX2/3 or KXPA100 software? With Netlogger? Has anyone tried to change the OS to Linux? Looking for experience prior to purchase. Thx in advance. Keeping Watch- shu Joe Shuman, NZ8P Unless someone like you cares a whole awful lot, nothing is going t

[Elecraft] Software for K4-PC operation

The FAQ mentions that the K4 will be able to be controlled by a PC via an ethernet connection. What software will be running on the PC to accomplish this? Tnx/73, John AE5X https://ae5x.blogspot.com __ Elecraft mailing list Home: http://

Re: [Elecraft] software problem on K3S - software lose 2nd speaker!

DO NOT PLUG A MONO PLUG INTO SPEAKER OUTPUT!!! Yes I am YELLING! Sent from my iPhone ...nr4c. bill > On May 12, 2019, at 7:38 AM, IK4EWX wrote: > > I dont understand why sometime, it has happened various time, the K3S lose > the 2nd loudspeaker audio and when I go in config menu I find t

[Elecraft] software problem on K3S - software lose 2nd speaker!

SPKRS can switch to 1 automatically if you use mono speakers or there is an accidental short between the right speaker leads. Check your speaker plug and wiring. From firmware release notes: ** MCU 3.14 / DSP 2.16, 5-9-2009 * SPEAKER PROTECTION: If you’re s

[Elecraft] software problem on K3S - software lose 2nd speaker!

I dont understand why sometime, it has happened various time, the K3S lose the 2nd loudspeaker audio and when I go in config menu I find that it has returned setting SPKRS = 1 - autonomously modified by the K3S - when before he was setted SPKRS = 2. I have firmware 5.67, hope new firmware will so

[Elecraft] Software control of RX antenna selection

Have an inquiry with the N1MM logging group but thought I would raise the question here. Is it possible to toggle the RX antenna selection via the Keyboard with N1MM software? Regards, Mark, K1RX __ Elecraft mailing list Home: http:

Re: [Elecraft] Software suggestions for KX3

Sent from my Samsung Galaxy smartphone. Original message From: ohturoey Date: 2017-11-09 2:04 PM (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Software suggestions for KX3 Dear Sir I have the same setup as you with the KX3 win4k3 and the steinberg UR22m

Re: [Elecraft] Software suggestions for KX3

Dear Sir I have the same setup as you with the KX3 win4k3 and the steinberg UR22mkII I have tried for a long time to get the UR22 to work with my panadapter in win4k3 but with no success I get a double image, left and right of centerline is the same, have tried to adjust but I cant seem to figure i

Re: [Elecraft] Software Additions

Could the Elecraft radio software be changed so that K3/KSs radios (equipped with the proper AM or FM filter) have a "WDATA" mode that allows receiving and transmitting this 5 kHz bandwidth? The K3 has a 4.25 KHz hardware audio filter following the ADC. Using either the AM or FM filter, bandw

[Elecraft] Software Additions

As I grow older with hearing loss I have become interested in the multitude of digital modes that are available because they don't rely on good hearing. A bandwidth of up to 5 kHz is used by the popular WSJT-X software. Could the Elecraft radio software be changed so that K3/KSs radios (equipped

Re: [Elecraft] Software updates

The differences between K3 and K3S firmware features are very minor, all having to do with hardware addressing. For example, the K3S has a second attenuator section. Other than this, there is no difference in functionality. The reason there are two different .hex files in the load package is tha

Re: [Elecraft] Software updates

Knut, The functions of the K3 and K3S are the same, and will likely remain the same. The differences are in the hardware, so a 2nd MCU file has been in place for some time to allow for a change in the microcontroller used in later K3s and the K3S. I can envision this being expanded, not to ch

Re: [Elecraft] Software updates

Hi Don, Hold on a second. Up to this point the firmware for the K3 and the K3S has been exactly the same. The firmware figures out at run time which features are available whether it being in the K3 or the K3S and behaves accordingly. Is there something changed here? That would really complicate

Re: [Elecraft] Software updates

Ted, There already is a difference. K3 Utility figures out which you have and loads the matching firmware when there is a difference. It should be seamless whether you have a K3 or K3S. 73, Don W3FPR On 2/23/2017 9:51 AM, Ted Edwards W3TB wrote: As I read of updates -- and one specificall

[Elecraft] Software updates

As I read of updates -- and one specifically saying K3S -- is there going to be a difference coming between what applies to K3S and the K3 itself? Thanks! -- 73 de Ted Edwards, W3TB and GØPWW and thinking about operating CW: "Do today what others won't, so you can do tomorrow what others can't.

[Elecraft] Software testing

I've written a settings saver for the K3. It should work on the K3S, but I don't have one to test it on. The program reads every Menu and Config setting that's readable, and stores it in a file. You can read a second radio and compare the settings side-by-side. The program puts the radio into Te

Re: [Elecraft] Software suggestions for KX3

switch knob instead is annoying. (HI) 73, Charlie k3ICH - Original Message - From: "Todd - k1tm via Elecraft" To: Sent: Monday, March 09, 2015 11:32 PM Subject: Re: [Elecraft] Software suggestions for KX3 Another vote for Win4K3suite plus DXlabs. Asus Xonar U7 for the

Re: [Elecraft] Software suggestions for KX3

Another vote for Win4K3suite plus DXlabs. Asus Xonar U7 for the sound system. See the sound card comparison on Telepost Inc. http://www.telepostinc.com/soundcards.html With the above combo, you get point and click tuning and the integration of third party apps and other hardware/software is grea

Re: [Elecraft] Software suggestions for KX3

: [Elecraft] Software suggestions for KX3 Message-ID: Content-Type: text/plain; charset=UTF-8 Hello all, I posted a question on here a few weeks ago about software for controlling and enhancing the KX3 experience. I had previous experience with MacLogger and because of that and a lack of

Re: [Elecraft] Software suggestions for KX3

Mark, Another vote for DXLabs. I keep a Windows laptop in my Mac centric ham shack for the sole purpose of running it. If you knew how much I dislike all versions of Windows you would really know what a recommendation that is! Rick K6LE On Mon, Mar 9, 2015 at 9:56 AM, Mark Tellez wrote: > H

Re: [Elecraft] Software suggestions for KX3

Mark, You can use the last free version of HRD. It does work with the KX3. Just set it up for K3 operation. However, If you want to do it to the max, download a copy of Win4K3, $50, and buy a USB sound card that runs 24 bit sampling at 96KHz or better sample rate. They run anywhere from $

Re: [Elecraft] Software suggestions for KX3

The two I would recommend are fldigi and DXlab {both free}... Try DXlab first - it has ALL the bells. Both are updated often! 73, steve WB3LGC On 09-Mar-15 12:56 PM, Mark Tellez wrote: Hello all, I posted a question on here a few weeks ago about software for controlling and enhancing the KX3

Re: [Elecraft] Software suggestions for KX3

I use Fldigi for almost everything digital. It's a very versatile program, ported to Windoze and Linux (maybe other OSs?). Fldigi and its suite (flrig, flarq, etc.) are free, and fairly well-maintained and -documented. Fldigi will also maintain a log for you, but I've not used this feature perso

[Elecraft] Software suggestions for KX3

Hello all, I posted a question on here a few weeks ago about software for controlling and enhancing the KX3 experience. I had previous experience with MacLogger and because of that and a lack of clarity on my part many of the people who responded assumed I was currently running an Apple which I

Re: [Elecraft] Software for KX3

That looks nice.. I used the N1MM plus, but I don't remember which version it was. I can say that I have updated before leave on 22.11.2014. I will try that on my next portable activation. Thanks for the good news. 73 Alex On Wed, Jan 28, 2015 at 3:58 PM, Richard Ferch wrote: > Alex, > > What

Re: [Elecraft] Software for KX3

Alex, What version of N1MM Logger were you using? If you were using N1MM Classic or an N1MM Plus version older than 1.0.4429, those versions use / as a separator between commands. Starting with Plus version 1.0.4429, the command separator has been changed to \, and it is now possible to send

Re: [Elecraft] Software for KX3

Alex, There is a way to do it, I don't; As I recall it was too much trouble. I use a WinKeyer USB with N1MM when I contest. I have zero problems this way. I know it's another piece of gear, but the ease is great and I can stop sending by just touching my key or add information. 73, Barry

Re: [Elecraft] Software for KX3

I would like to know a Contest/DXPedition software. I tried to use N1MM with some macros but I couldn't figure it out how to make KX3 transmit the "/". During my stay in Curacao I had to use the keyer because of that. :) For me, this was the only thing that bothered me, sometimes the KX3 keyer too,

Re: [Elecraft] Software for KX3

As was mentioned, the software you want to use depends on what your plans are. I've used Ham Radio Deluxe, and the DX Suite's Commander with the KX3 with no problems. I've also used some of the digital mode software that interfaces with both, WSJT-X for instance, and it works flawlessly. Wh

Re: [Elecraft] software

Except you need a Mac, right? On Jan 27, 2015, at 9:47 AM, Rick Prather wrote: > Mark, > > A lot depends on what your operating interests are. > > For example, if you are a DX'er I would recommend RUMLog. Especially with > a K3/KX3. > > It does a superior job of tracking DX, spotting summary

Re: [Elecraft] software

But know to be used by pirates ... ;>) - 73 and good DX de Mike, K6MKF, President - NCDXC -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil Wheeler Sent: Tuesday, January 27, 2015 9:57 AM To: elecraft@mailman.qth.net Subject: Re: [Elecr

Re: [Elecraft] software

Sounds positively intoxicating, Rick :-) Phil W7OX On 1/27/15 8:47 AM, Rick Prather wrote: Mark, A lot depends on what your operating interests are. For example, if you are a DX'er I would recommend RUMLog. Especially with a K3/KX3. It does a superior job of tracking DX, spotting summary an

Re: [Elecraft] software

Mark, A lot depends on what your operating interests are. For example, if you are a DX'er I would recommend RUMLog. Especially with a K3/KX3. It does a superior job of tracking DX, spotting summary and LoTW handling. And, the price is right! 73, Rick K6LE On Mon, Jan 26, 2015 at 8:00 PM, Ma

Re: [Elecraft] software

Mark, I’m just a few months into the wonderful KX3 + PX3 + KAT500 (brag) — love all things Elecraft. MacLoggerDX works very well. FLDigi also is well matched. Bit of a learning curve on FLDigi, but excellent signal reports and substantial contacts. Happy to assist if you need. David Ahrendts, K

Re: [Elecraft] software

Mark, I use Win4k3 with HRD and CW Skimmer. This collection integrate very smoothly and allows me a fair amount of flexibility. I can do RTTY, CW, or PSK using the radio's inherent capability using the terminal window of Win4k3. For contesting, I swap out HRD for N1MM contest S/W. 73, Barr

Re: [Elecraft] software

Hi Mark, I have used MLDX with my KX3 in the past and it worked very well. I also have a K3/P3/KAT500/KPA500 that I use MLDX with. However, I got spoiled by that dang P3 and wanted something like it for the KX3! This was before Elecraft announced the PX3. So, I downloaded and installed a copy

[Elecraft] software

Hello all, I am curious. I am fairly new to the KX3. I have used several software packages in the past with my base stations including MacLogger and HRD. What do people use with the KX-3 and why? Mark __ Elecraft mailing list Home:

Re: [Elecraft] Software perfection

>> >> Software written by the world's greatest programmer and tested by the >> world's greatest software tester would still be something I would never >> risk my life with. Weinberg's Second Law: If builders built buildings the way programmers wrote programs, then the first woodpecker that cam

Re: [Elecraft] Software perfection

-CFI) Date: Fri, 16 Jan 2015 19:40:54 -0700 From: Doug Person via Elecraft [...] Software written by the world's greatest programmer and tested by the world's greatest software tester would still be something I would never risk my life with. 73, Dou

[Elecraft] Software perfection

You do exactly that every time you fly (commercial). But it didn¹t stop me either. That¹s what the humans are for. Ted, KN1CBR (ex-CFI) > >-- > >Message: 26 >Date: Fri, 16 Jan 2015 19:40:54 -0700 >From: Doug Person via Elecraft >To: elecraft@mailman.qth.net >Subjec

[Elecraft] Software modifications

I'm a big fan of open-source software but, as a software developer/supervisor with more than 30 years experience, I think it's worthwhile to know the big picture before messing with software that another developer wrote. Sometimes it's not obvious why a segment of code exists. And yes, I've re

[Elecraft] Raspberry Pi Elecraft software?

I'd like to plead / beg / request that the Linux Elecraft KX3 Utility be ported to the Raspberry Pi platform. This little computer would be *perfect* for remote operation with the KX3! Thanks. __ Elecraft mailing list Home: http://mail

Re: [Elecraft] Software to graph antenna SWR

K3_EZ will do that with a K3. It's a Windows program. 73, Dick - KA5KKT _ Some time ago I had this program that you could use to sweep the antenna and produce a printout of the SWR among other utilities for the K3. I have googled but cannot locate it anybody remember what it was

Re: [Elecraft] Software to graph antenna SWR

Jackpot Rick... Thanks Christmas Greetings from Down Under Peter -- View this message in context: http://elecraft.365791.n2.nabble.com/Software-to-graph-antenna-SWR-tp7581779p7581782.html Sent from the Elecraft mailing list archive at Nabble.com. __

Re: [Elecraft] Software to graph antenna SWR

K3EZ perhaps? Merry Christmas, Rick wa6nhc -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of peterc281 Sent: Monday, December 16, 2013 4:45 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Software to graph antenna SWR

[Elecraft] Software to graph antenna SWR

Some time ago I had this program that you could use to sweep the antenna and produce a printout of the SWR among other utilities for the K3. I have googled but cannot locate it anybody remember what it was called? It was a windows program. 73, Peter VK3IJ -- View this message in context: htt

Re: [Elecraft] Software for K3 remote

The new version of TRX-Manager has that as well: 73, Mitch DJ0QN On 20.05.2013 16:56, Jorge Diez - CX6VM wrote: Hello Is there any software to control K3 remotely that show you the front of the K3? Like using a K3 at base station but in a softw

Re: [Elecraft] Software for K3 remote

n...@mailman.qth.net >[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jorge Diez - >CX6VM >Sent: Monday, May 20, 2013 7:56 AM >To: elecraft@mailman.qth.net >Subject: [Elecraft] Software for K3 remote > >Hello > > > >Is there any software to control K3 remotely that

Re: [Elecraft] Software for K3 remote

gt; >-Original Message- >From: elecraft-boun...@mailman.qth.net >[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jorge Diez - CX6VM >Sent: Monday, May 20, 2013 7:56 AM >To: elecraft@mailman.qth.net >Subject: [Elecraft] Software for K3 remote > >Hello > > > &g

Re: [Elecraft] Software for K3 remote

; > > -Original Message- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jorge Diez - CX6VM > Sent: Monday, May 20, 2013 7:56 AM > To: elecraft@mailman.qth.net > Subject: [Elecraft] Software for K3 remote > > Hello >

Re: [Elecraft] Software for K3 remote

Jorge, Tom Blahovivi (VA2FSQ) is working on a project right now and it looks very promising. He is a frequent contributor on this list. Check out his website: VA2FSQ.COM Harlan NC3C Sent from my Verizon Wireless 4G LTE DROID Jorge Diez - CX6VM wrote: >Hello > > > >Is there any software to c

Re: [Elecraft] Software for K3 remote

Subject: [Elecraft] Software for K3 remote Hello Is there any software to control K3 remotely that show you the front of the K3? Like using a K3 at base station but in a software Thanks, Jorge CX6VM/CW5W __ Elecraft mailing

[Elecraft] Software for K3 remote

Hello Is there any software to control K3 remotely that show you the front of the K3? Like using a K3 at base station but in a software Thanks, Jorge CX6VM/CW5W __ Elecraft mailing list Home: http://mailman.qth.net/mailman/l

[Elecraft] Software

Anyone running Snow Leopard, Lion or Mountain Lion willing to do a little software test, please contact me off-line. 73, Mike NF4L __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.

[Elecraft] Software

I've written a little program for the Mac (Intel based) to turn a rotator. If anyone is using a Yaesu GS232 controller, please contact me off-list if you'd be willing to run a test for me. It also communicates with RUMlog via a script to get the heading. My rotor uses DCU, so I know that works

[Elecraft] Software

Anyone interested in trying out a Mac app I just finished, go to http://nf4l.com/rotor/rot.htm It's for turning antennae whose control boxes understand the DCU command set. It should run on SnowLeopard and up (Intel based Macs). It's my first Mac program. Next up is porting K3 Texter to the Mac.

[Elecraft] Software

Thanks to everyone that replied to my post about software. Looks like NaP3 is the way to go. Thanks 73 Nels W0TUP North Dakota __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/m

Re: [Elecraft] Software CW in K3 and KX3 and contesting

Hi, Will -- "Q" was probably not the best choice I could have used to distinguish between the two modes. My biggest problem with Iambic and a dual-lever paddle is the number "2", which I do have to send occasionally:-) It typically comes out as dit-dit-dah-dit-dah. For me, at least, I t

Re: [Elecraft] Software CW in K3 and KX3 and contesting

RUMPed/RUMLog is unique because it is written for Apple by one person for his own use/his own equipment. It does not support the Windows environment and multiple transceiver protocols. Tom can concentrate on optimizing operation with the K3 (and KX3 to the extent it works the same as the K3).

Re: [Elecraft] Software CW in K3 and KX3 and contesting

That RUMped works well with KX3 software scheme means that it can be done. Even if not perfect, this would stop taking other interfaces/CW keyers, cables, etc. If KX3 is small but extra boxes take twice as much space, how good is it? So it seems that there are 3 approaches to contest CW with KX3:

Re: [Elecraft] Software CW in K3 and KX3 and contesting

I infer that contesting and contest CW aids are what you are after. I use N1MM contest logging software to control my K1EL keyer. It works with any radio that can be used with a key. However there are other contest logging packages around, but most are designed to operate with an external keyer

Re: [Elecraft] Software CW in K3 and KX3 and contesting

Rumlog and rumped both work well, but Rumped is contest oriented. 73, Scott aa0aa Enviado desde mi oficina móvil BlackBerry® de Telcel -Original Message- From: GOBrien Sender: elecraft-boun...@mailman.qth.net Date: Thu, 9 Aug 2012 19:36:23 To: Subject: Re: [Elecraft] Software CW in K3

Re: [Elecraft] Software CW in K3 and KX3 and contesting

My reply didn't get attached to this thread, so I will try again. Yes, there is a logging program that uses the serial port of the KX3 via software CW. I used RUMped very successfully during Field Day this year on my KX3 #151. I connected to it via the KXUSB cable to my 2011 MacBook Air. I can

[Elecraft] Software CW in K3 and KX3 and contesting

I used RUMped during Field Day this year via the KX3USB and my MacBookAir on CW. It worked very well. 73 de George, AB4FH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq

Re: [Elecraft] Software CW in K3 and KX3 and contesting

an.qth.net > Subject: Re: [Elecraft] Software CW in K3 and KX3 and contesting > > > > Does any contesting software support CW via command? > > No, and none of the big three are likely to do so as the "KY" command is not > uniform across all brands and lacks the ab

Re: [Elecraft] Software CW in K3 and KX3 and contesting

Win-Test is my choice for contesting. In the latest contest I used my KX3 (novelty value and wanted to try a conetst in QRP), and I missed the automatic keying with DTR/CTS, but on the other hand had fun sending everything with the paddles. However, I think all of the programs you mention support

Re: [Elecraft] Software CW in K3 and KX3 and contesting

] On Behalf Of Joe Subich, W4TV > Sent: Thursday, August 09, 2012 1:43 PM > To: elecraft@mailman.qth.net > Subject: Re: [Elecraft] Software CW in K3 and KX3 and contesting > > > > Does any contesting software support CW via command? > > No, and none of the big three ar

Re: [Elecraft] Software CW in K3 and KX3 and contesting

K3: Design, Configuration and Operation" www.ke7x.com fcady at ieee dot org > -Original Message- > From: elecraft-boun...@mailman.qth.net [mailto:elecraft- > boun...@mailman.qth.net] On Behalf Of Joe Subich, W4TV > Sent: Thursday, August 09, 2012 11:43 AM > To:

Re: [Elecraft] Software CW in K3 and KX3 and contesting

Who are the big three Joe? -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe Subich, W4TV Sent: Thursday, August 09, 2012 1:43 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Software CW in K3 and KX3 and

Re: [Elecraft] Software CW in K3 and KX3 and contesting

> Does any contesting software support CW via command? No, and none of the big three are likely to do so as the "KY" command is not uniform across all brands and lacks the ability to determine buffer status or edit buffer contents. 73, ... Joe, W4TV On 8/9/2012 12:01 PM, Ignacy wrote: >

[Elecraft] Software CW in K3 and KX3 and contesting

Both K3 and KX3 can send CW via a software command. Is this feature useful for contesting? Does any contesting software support CW via command? This feature is especially important for KX3 where there is no possibility of keying via serial cable. Also for K3 if an interface does not allow for CTS

[Elecraft] Software testers wanted

In response to a post here a few days ago, I'm writing a Windows program for the K3 (and maybe the K2 - I don't have one) that reads the radio and displays on the computer screen as text for a screen reader to say. The program is in the very early stage of development, and there may be crashes

Re: [Elecraft] Software downloading problem

Rev 4.22 firmware is still beta. You will need to get it from ftp.elecraft.com/k3/firmware/beta. The procedure is documented here: http://www.elecraft.com/K3/k3_beta_release_instructions.htm 73, ... Joe, W4TV On 11/25/2010 12:49 AM, r...@aol.com wrote: > I can't download the newer MCU or

Re: [Elecraft] Software downloading problem

I'm on the road and can't check but my belief is that 4.14 is the latest non beta. Dick, K6KR On Nov 24, 2010, at 21:49, r...@aol.com wrote: > I can't download the newer MCU or FPF software updates for some reason. > I'm using Utility 1.3.11.5 but when I check for updates the latest I get

[Elecraft] Software downloading problem

I can't download the newer MCU or FPF software updates for some reason. I'm using Utility 1.3.11.5 but when I check for updates the latest I get are MCU 4.14 and FPF 1.13 ... could it be these are the latest updates that aren't Betas? Or am I doing something wrong? Thanks! Dick- K9OM _

Re: [Elecraft] software

On Wed, 04 Aug 2010 18:50:19 -0400, Don Wilhelm wrote: Exactly! BT 73 ES GUD LUK DE N5GE, QCWA LIFE MEMBER 35102 AR SK n...@n5ge.com http://www.n5ge.com >I do wish people would not do this (put a link in an email with no >explanation other than perhaps something cryptic in the subject line).

Re: [Elecraft] software

I do wish people would not do this (put a link in an email with no explanation other than perhaps something cryptic in the subject line). As a routine (part of my safe computing practice), I do not open links unless the content is briefly described in the email. 73, Don W3FPR lu1xs wrote: > > -

[Elecraft] software

- http://n2.nabble.com/file/u461200/LU1XS.jpg -- View this message in context: http://elecraft.365791.n2.nabble.com/software-tp5374558p5374558.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing li

Re: [Elecraft] software to control the K3

Thanks Julius!! -Mensaje original- De: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] En nombre de Julius Fazekas n2wn Enviado el: Miércoles, 31 de Marzo de 2010 06:14 p.m. Para: elecraft@mailman.qth.net Asunto: Re: [Elecraft] software to control the K3 It

Re: [Elecraft] software to control the K3

It works well Jorge. Makes playing with the settings go a lot quicker. Nice antenna SWR tracking function too. 73, Julius n2wn - Julius Fazekas N2WN Tennessee Contest Group http://www.k4ro.net/tcg/index.html Tennessee QSO Party http://www.tnqp.org/ Elecraft K2/100 #4455 Elecraft K3/100 #

Re: [Elecraft] software to control the K3

On Wed, 31 Mar 2010 11:37:55 -0300, "Jorge Diez - CX6VM" wrote: [snip] I tried the software out last week and it seemed to work OK except when setting up and storing memories. TOM, N5GE BT 73 ES GUD LUK AR DE N5GE SK >I search about a software that display all the configurations and change >

[Elecraft] software to control the K3

Hello, I search about a software that display all the configurations and change them. I found K3 EZ http://home.roadrunner.com/~n2bc/SW.htm Do you know is this is good or you recommend another one? Thanks! 73, Jorge CX6VM __

[Elecraft] Software Upgrades

One of the problems with having a radio that is way smarter than I am is that things take an inordinate amount of time to accomplish what should be a simple task. I've just spent three hours downloading the latest beta software. I freely admit that all of the mistakes were mine: from trying to us

Re: [Elecraft] Software for PSK31/Morse

John Chance-Read wrote: > > I am looking for software similar to DigiPan which for PSK31 provides > panoramic display of frequency spectrum and identifies each station with > its callsign and call info. I want one FOR MORSE. I am totally deaf and > want to work in contest and I think this is

[Elecraft] Software for PSK31/Morse

I am looking for software similar to DigiPan which for PSK31 provides panoramic display of frequency spectrum and identifies each station with its callsign and call info. I want one  FOR MORSE.  I am totally deaf and want to work in contest and I think this is the answer for me.  I tried feeling

Re: [Elecraft] Software Development Goals

I am consummately pleased with my K3. I am astounded with the raw performance and dazzled with the features. So am I. The K3 is the first radio I have ever bought without some silly engineering shortfall. The only things I see people complaining about are specialized personal use or a

Re: [Elecraft] Software Development Goals

NS5U/1 Jim Benson wrote: > > An Official List both of features to be enabled and recognized bugs > might go a long way towards reducing the spurious responses and allaying > the fear of features yet to be enabled. Such a list likely already exists > among the developers. > Jim, I don't

[Elecraft] Software Development Goals

I am consummately pleased with my K3. I am astounded with the raw performance and dazzled with the features. I look forward to remaining stunned with the product as more features are implemented. Considering the breadth of uses the K3 is applied towards by the large diversity of users with

[Elecraft] Software Upgrades

I too have upgraded my K3 # 604 to every new beta Firmware version as soon as it is posted. I have had no problems. Elecraft is doing an excellent job with the Firmware. Ron Durie WB4OOA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.n

Re: [Elecraft] Software Upgrades

I have upgraded to every firmware beta and never had a problem. David Wilburn K4DGW BOB PHILBROOK wrote: After reading countless reflector comments about firmware upgrades and releases, it appears to me that in many instances such so called upgrades are two steps forward and one in reverse.

Re: [Elecraft] Software Upgrades

Lyle Johnson wrote: > >> Set the PWR control to 100w (or 120w if you wish) and control the power >> output using the MIC level control on the front panel. (MIC SEL = LINE >> IN). >> Or is that classed as cheating? :-) > > Yes, I think it is :-) > > The problem with this approach is that over

Re: [Elecraft] Software Upgrades

The K3 operating tip regarding PSK setup: http://www.elecraft.com/K3/k3_operating_tips.htm#psk%20audio really does need to be updated. It was written before the ALC system changes that came with MCU 1.87. Bob NW8L On Mon, Aug 18, 2008 at 8:15 AM, Lyle Johnson <[EMAIL PROTECTED]> wrote: >> Set t

Re: [Elecraft] Software Upgrades

Set the PWR control to 100w (or 120w if you wish) and control the power output using the MIC level control on the front panel. (MIC SEL = LINE IN). Or is that classed as cheating? :-) Yes, I think it is :-) The problem with this approach is that over time the slow ALC loop may try to build the

Re: [Elecraft] Software Upgrades

Dave G4AON wrote: > > > There are still issues to be resolved, one I would like fixed is the > inability to adjust power while transmitting data which is tedious. > There are published items on the "to be implemented" list such as the > TCXO calibration to 0.5ppm. > > I hope I'm not missi

Re: [Elecraft] Software Upgrades

Having already survived the Ten-Tec Orion I firmware and hardware upgrade fiasco, I must admit that my experiences with the Elecraft firmware migration has been a real pleasure. I eagerly download each new beta version as soon as I know it's available. I have never regressed to a previous editi

[Elecraft] Software Upgrades

After reading countless reflector comments about firmware upgrades and releases, it appears to me that in many instances such so called upgrades are two steps forward and one in reverse. You know the drill, fix this problem, add a new feature, and then find that something that worked in previ

Re: [K3] [Elecraft] Software suggestion: a more prominent TEST indicator

Exactly, the ergonomics of the K3 have been well thought out. Just RTFM! G4ILO wrote: After the first couple of times, you learn to check for things like that. Nobody should expect to be able to operate anything as complex as a K3 flawlessly without first spending some time learning how to dr

Re: [K3] [Elecraft] Software suggestion: a more prominent TEST indicator

On Tue, 01 Jul 2008 07:56:53 -0700 (PDT), Julian, G4ILO wrote: > > >> >Why stop at a chirp? Elecraft could make a voice synthesis module, like the >ones in car sat-nav equipment. Whenever you key down, a user-selectable >voice (Arnie Schwarzenegger? Margaret Thatcher?) could say "Warning. Test >m

[K3] [Elecraft] Software suggestion: a more prominent TEST indicator

The existing flashing TX indicator is just fine, leave it alone. Some of us leave their K3 in a receive only state to avoid upsetting other gear, in my case a broadband modem that fouls up at the smallest amount of RF. It also avoids catching the paddles and accidentally sending RF when you did

Re: [K3] [Elecraft] Software suggestion: a more prominent TEST indicator

Nah, voice warnings are not effective. Most of us spend our days ignoring the vocal clatter pouring from cellphones, tv's , radios, etc. (CW ops, anyway...) What is needed is a switched relay on the K3 that would set off a large fire alarm type bell. And maybe an electric jolt to the chair seat f

  1   2   >