Hi Thomas,
I'm not sure what your operating style is but if you are looking for 100w on
CW and SSB then I recommend the Gamma Research HPS-1a. I have one and run my
K3-100 with it all the time in a portable fashion. Here is a link to Fred's
site: http://www.gammaresearch.net/
It has a very small
Trevor Smithers wrote:
supplies have no place anywhere near the ham shack - its bad enough the neighbours
having them all over the place but they don't know or care - we should know better.
But we should also know about conversion efficiencies, power factors and
power line harmonics!
As an
This discussion gives me the opportunity to correct an opinion that I
earlier posted on this list. Some long time ago I said I didn't much
like the Watson W25-XM switched supply because of RF noises which
always contrive to arrive on frequency at the worst possible
moment. I advised someone o
The early Samlex switching power supplies were on the noisy side but they have
corrected that problem years ago. I personally use the Samlex SEC 1235M
switching supply with my K3 and certainly do not get any noise from it.
73 from Fern VE7GZ with K3 #412
- Original Message -
From
I have a GSV3000 as well and can confirm the lack of rfi. In my opinion switch
mode
supplies have no place anywhere near the ham shack - its bad enough the
neighbours
having them all over the place but they don't know or care - we should know
better.
As an aside if anyone has any doubts about
Thomas Kuehl wrote:
>
> Hi,
>
> I am back on the Elecraft list after being gone for quite a while. I have
> a K3/100 coming in the next month or 2, and now I am thinking about how it
> is best to power it.
>
> Thanks, Thomas - AC7A
>
>
I bought the Alinco DM-330MW to power my K3. It's pret
Based on my own personal experience, I would recommend a linear supply. I
use the Astron RS-35A. Yes, it is as big as the K3, but it is rock solid,
well-filtered, and RFI-free, and has over-voltage and over-current
protection. In addition, the Astron has heavy-duty output terminals that
will bet
Same here - nice quiet PSU. I would buy one again without any hesitation.
Simon Brown, HB9DRV
--
From: "G4ILO" <[EMAIL PROTECTED]>
I don't like switchers. I have a Diamond GSV3000 25A linear supply.
__
Thomas Kuehl wrote:
>
> small size as well. Switching supplies have come a long way relative to
> the RF hash generation issue and I am considering going that route. I sure
> don't want to degrade the K3'3 outstanding performance with a noisy
> supply, so I am still cautious.
>
I don't like sw
Same here. I have two of these supplies, and have yet to hear a
peep of RF noise from them.
73
Stewart G3RXQ
On Mon, 7 Jul 2008 21:50:08 -0400, Bruce McLaughlin wrote:
> I am having very good performance from the SEC 1223 which is the
same supply
> I use with the K2/100. If it does generate any n
I am having very good performance from the SEC 1223 which is the same supply
I use with the K2/100. If it does generate any noise I have yet to hear it.
Bruce-W8FU
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Thomas Kuehl
Sent: Monday, July 07, 2008 5
11 matches
Mail list logo