On Mon, 17 Aug 2020 at 20:20, andy pugh wrote:
> andypugh@rm-one:~/linuxcnc-dev$ sudo apt-get install python-pyqt5-qtwebkit
I see the problem:
https://packages.debian.org/stretch/python/python-pyqt5.qtwebkit
miss-spelled name in the original email.
--
atp
"A motorcycle is a bicycle with a pan
On Tue, 11 Aug 2020 at 12:53, andy pugh wrote:
> > python-pyqt5
> > python-pyqt5-qsci
> > python-opengl
> > python-pyqt5-qtopengl
> > python-pyqt5-qtsvg
> > python-pyqt5-qtwebkit
> > python-opencv
> > python-dbus.mainloop.pyqt5
> >
> > python-espeak
> > python-gst0.10
andypugh@rm-one:~/linuxcnc-
> On 16 Aug 2020, at 4:22 am, andy pugh wrote:
>
> On Fri, 14 Aug 2020 at 08:48, Phill C wrote:
>
>>> Using the terminal on the ISO - I can't right click and paste - anyone else
>>> find this?
>
>> Yep, same here.
>
> I just tried this and it seems fine.
>
> Can you confirm _which_ .iso
On Fri, 14 Aug 2020 at 08:48, Phill C wrote:
> > Using the terminal on the ISO - I can't right click and paste - anyone else
> > find this?
> Yep, same here.
I just tried this and it seems fine.
Can you confirm _which_ .iso file and whether this was in the live or
installed environment?
--
On Sat, 15 Aug 2020 at 00:48, Phill Carter wrote:
>
> The RPi deb seems to have a convoluted name
> (linux-image-4.19.71-rt24-v7l+_4.19.71-rt24-v7l+-4_armhf.deb)
> http://linuxcnc.org/dists/buster/base/binary-armhf/
I think that's a standard naming scheme (and, incidentally, I had
nothing to do
ult.
> Chris
>
>
> From: andy pugh
> Sent: August 14, 2020 10:02 PM
> To: EMC developers
> Subject: Re: [Emc-developers] 2.8 release update.
>
> On Fri, 14 Aug 2020 at 08:10, Chris Morley wrote:
>>
>> Using the terminal on the ISO - I can't righ
installed.
Whatever terminal came default.
Chris
From: andy pugh
Sent: August 14, 2020 10:02 PM
To: EMC developers
Subject: Re: [Emc-developers] 2.8 release update.
On Fri, 14 Aug 2020 at 08:10, Chris Morley wrote:
>
> Using the terminal on the ISO - I
On Fri, 14 Aug 2020 at 08:10, Chris Morley wrote:
>
> Using the terminal on the ISO - I can't right click and paste - anyone else
> find this?
Live or installed? it _should_ have xfce4-terminal
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial us
On Fri, 14 Aug 2020 at 22:26, Chris Morley wrote:
>
> How about an archive opening program?
> I can't find one by default.
And for some reason the apt sources only contains debian security. So
you can't find any alternate packages.
Which is a bit annoying, I have no idea why what is basically a
d
xarchiver is very tiny and works very well, just my suggestion.
Alec
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
How about an archive opening program?
I can't find one by default.
Andy you might have stripped out a bit too much it seems :)
Chris
From: Phill C
Sent: August 14, 2020 7:47 AM
To: linuxcnc-developers
Subject: Re: [Emc-developers] 2.8 release update.
&g
> On 14 Aug 2020, at 5:10 pm, Chris Morley wrote:
>
> Using the terminal on the ISO - I can't right click and paste - anyone else
> find this?
>
> Chris
Yep, same here.
Cheers, Phill
___
Emc-developers mailing list
Emc-developers@lists.sourcefor
Using the terminal on the ISO - I can't right click and paste - anyone else
find this?
Chris
From: andy pugh
Sent: August 11, 2020 10:35 PM
To: EMC developers
Subject: Re: [Emc-developers] 2.8 release update.
On Tue, 11 Aug 2020 at 12:53, andy pugh
On Wed, 12 Aug 2020 at 04:22, Chris Morley wrote:
>
> Thanks for working on this Andy. I tried your ISO5 today.
> It seems the python packages for webkit and opencv are still missing on the
> ISO.
Looking at the logs, it seems that recommends are not installed by default:
Recommended packages:
From: andy pugh
Sent: August 11, 2020 10:35 PM
To: EMC developers
Subject: Re: [Emc-developers] 2.8 release update.
On Tue, 11 Aug 2020 at 12:53, andy pugh wrote:
> Anyway, I will add the two missed packages and build a new test-iso
> today.
https://www.linuxcnc.org/temp/2.8test5.iso
On Tue, 11 Aug 2020 at 12:53, andy pugh wrote:
> Anyway, I will add the two missed packages and build a new test-iso
> today.
https://www.linuxcnc.org/temp/2.8test5.iso
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses,
On Tue, 11 Aug 2020 at 03:25, Chris Morley wrote:
> If possible, I would prefer to have the libraries required for Qtvcp to be
> included,
I added a list to the "recommends" but haven't built an ISO yet, but I
don't think it is the same list
https://github.com/LinuxCNC/linuxcnc/blob/2.8/deb
: Chris Morley
Sent: August 4, 2020 7:09 AM
To: EMC developers
Subject: Re: [Emc-developers] 2.8 release update.
Is it possible to add mesaflash to the ISO?
From: andy pugh
Sent: August 3, 2020 10:45 PM
To: EMC developers
Subject: Re: [Emc-developers] 2.8 release
I installed and compiled LinuxCNC.2.9.0-pre0 in virtualbox.
After satisfying all the dependencies, configure choked on pango. I
installed python-glade2 to resolve it. Configure and make and make install
worked just fine. Runtests finished with no errors. LinuxCNC/Axis starts
and runs.
I created an
I see the entire configure message that scrolls across the screen as the
configure runs. I just have to scroll it down until I see the top. That is
where I saw libgnomeprint and optreset messages. I don't remember seeing
the optreset message before. I have resolved the libgnomeprint before. I
could
On Tuesday 04 August 2020 14:07:19 Jon Elson wrote:
> On 08/04/2020 10:10 AM, Gene Heskett wrote:
> > On Tuesday 04 August 2020 08:10:48 Stuart Stevenson wrote:
> >> I saw no problems in config.log other than the configure report in
> >> the terminal.
> >> libgnomeprint-2.2 and optreset
> >> both
On 08/04/2020 10:10 AM, Gene Heskett wrote:
On Tuesday 04 August 2020 08:10:48 Stuart Stevenson wrote:
I saw no problems in config.log other than the configure report in the
terminal.
libgnomeprint-2.2 and optreset
both are 'OLD' - I believe I can safely ignore both
But I was talking about wh
adder.
> > > >>
> > > >> thanks
> > > >> Stuart
> > > >>
> > > >> On Mon, Aug 3, 2020 at 12:23 PM Chris Morley
> > > >>
> > > >>
> > > >> wrote:
> > > >>> One
On Tue, 4 Aug 2020 at 08:09, Chris Morley wrote:
>
> Is it possible to add mesaflash to the ISO?
It should be there. Is it not?
https://github.com/andypugh/buster-iso/blob/master/config/package-lists/linuxcnc.list
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed
rote:
> > >>> One ugly work around is to embed gremlin into a qt screen.
> > >>> I just added a sample screen under
> > >>> qtvcp_screen/qtvcp_experimental/gremlin.ini
> > >>> It is Qtaxis with both qt's graphics and gremlin.
> >
Is it possible to add mesaflash to the ISO?
From: andy pugh
Sent: August 3, 2020 10:45 PM
To: EMC developers
Subject: Re: [Emc-developers] 2.8 release update.
On Mon, 3 Aug 2020 at 04:51, Phill Carter wrote:
> They seem to require:
> python-pyqt5
&g
as some warts that could be worked on.
> >>>
> >>> opencv should only be required if you use the camview widget.
> >>> It probably prevents one from using designer to modify screens -
> >>> I'll look into that.
> >>
Pi.
>>> It has some warts that could be worked on.
>>>
>>> opencv should only be required if you use the camview widget.
>>> It probably prevents one from using designer to modify screens - I'll
>>> look into that.
>>>
>>> Chris
>&
the camview widget.
>> It probably prevents one from using designer to modify screens - I'll
>> look into that.
>>
>> Chris
>>
>> ____
>> From: Phill Carter
>> Sent: August 3, 2020 9:16 AM
>> To: linuxcnc-developers
>> Subject: Re: [Emc-deve
>
>
> From: Phill Carter
> Sent: August 3, 2020 9:16 AM
> To: linuxcnc-developers
> Subject: Re: [Emc-developers] 2.8 release update.
>
> I couldn't get the Qtvcp screens working on my Pi either.
>
> The raspbian python-opengl mod
> On 4 Aug 2020, at 8:45 am, andy pugh wrote:
>
> On Mon, 3 Aug 2020 at 04:51, Phill Carter wrote:
>
>> They seem to require:
>> python-pyqt5
>> python-pyqt5.qsci
>> python-pyqt5.qtopengl
>> python-pyqt5.qtsvg
>> opencv
>>
>> Optional packages required are:
>> python-dbus.mainloop.pyqt5
>>
On Mon, 3 Aug 2020 at 04:51, Phill Carter wrote:
> They seem to require:
> python-pyqt5
> python-pyqt5.qsci
> python-pyqt5.qtopengl
> python-pyqt5.qtsvg
> opencv
>
> Optional packages required are:
> python-dbus.mainloop.pyqt5
> gstreamer1.0-tools
> python-espeak
> espeak
>
> The Blender sim requ
ly be required if you use the camview widget.
It probably prevents one from using designer to modify screens - I'll look into
that.
Chris
From: Phill Carter
Sent: August 3, 2020 9:16 AM
To: linuxcnc-developers
Subject: Re: [Emc-developers] 2.8 release update.
On Monday 03 August 2020 05:16:59 Phill Carter wrote:
> I couldn't get the Qtvcp screens working on my Pi either.
>
> The raspbian python-opengl module has been built for OpenGL ES, I
> tried several times to build it for OpenGL but was unsuccessful.
>
> Cheers, Phill
>
Its not a showstopper, I've
I couldn't get the Qtvcp screens working on my Pi either.
The raspbian python-opengl module has been built for OpenGL ES, I tried several
times to build it for OpenGL but was unsuccessful.
Cheers, Phill
> On 3 Aug 2020, at 5:09 pm, Gene Heskett wrote:
>
> On Sunday 02 August 2020 23:51:17 Phi
On Sunday 02 August 2020 23:51:17 Phill Carter wrote:
sudo apt install opencv, could not locate opencv on raspbian 10.4 for
armhf.
raspbian for armhf isn't using x11, but wayland, so my tools to search
are limited to aptitude But thats using tactical nukes without warning
labels. And it doesn
I tried the ISO and it installed fine on a VM.
I did notice the qtvcp sims don't run out of the box, they require some
packages and their dependencies. I was able to start them all after the
following were installed.
They seem to require:
python-pyqt5
python-pyqt5.qsci
python-pyqt5.qtopengl
pyt
Andy, it would be great if you could reschedule to next weekend and issue a
point release for the translations if not to hand by next week.
Please.. 😉
Rod Webster
*1300 896 832*
+61 435 765 611
VMN®
www.vmn.com.au
On Mon, 3 Aug 2020 at 10:12, andy pugh wrote:
> On Sat, 1 Aug 2020 at 01:46,
On Sat, 1 Aug 2020 at 01:46, andy pugh wrote:
>
> Does anyone here know of any let or hindrance why 2.8 can't be
> released this weekend?
As you might have noticed, I didn't. There are a few docs translations
in the pipeline, and I decided to wait for them.
--
atp
"A motorcycle is a bicycle wit
I tested your ISO Andy on machine and everything went smooth not any
problem in 3 axis setting.
On Sat, Aug 1, 2020, 04:26 andy pugh wrote:
> On Sat, 1 Aug 2020 at 03:07, Peter C. Wallace wrote:
>
> > Can you be more specific?
> > Which particular ones?
> >
> > basically hm2_eth inm inmux xy2mo
On Sat, 1 Aug 2020 at 03:07, Peter C. Wallace wrote:
> Can you be more specific?
> Which particular ones?
>
> basically hm2_eth inm inmux xy2mod stepgen pwmgen hostmot2-manpage
> but they all share so many files updating all of mesa-hostmot2
> seems like it would be simpler
If the fixes belonged
On Sat, 1 Aug 2020, andy pugh wrote:
Date: Sat, 1 Aug 2020 02:44:55 +0100
From: andy pugh
Reply-To: EMC developers
To: EMC developers
Subject: Re: [Emc-developers] 2.8 release update.
On Sat, 1 Aug 2020 at 02:16, Peter C. Wallace wrote:
Can the 2.9 hostmot2 driver additions, bugfixes
On Sat, 1 Aug 2020 at 02:16, Peter C. Wallace wrote:
> Can the 2.9 hostmot2 driver additions, bugfixes be included?
Can you be more specific?
Which particular ones?
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, dar
On Sat, 1 Aug 2020, andy pugh wrote:
Date: Sat, 1 Aug 2020 01:46:26 +0100
From: andy pugh
Reply-To: EMC developers
To: EMC developers
Subject: [Emc-developers] 2.8 release update.
Does anyone here know of any let or hindrance why 2.8 can't be
released this weekend?
We have Spanis
On Friday 31 July 2020 20:46:26 andy pugh wrote:
> Does anyone here know of any let or hindrance why 2.8 can't be
> released this weekend?
>
> We have Spanish and Chinese doc translations on the way, and I have
> given up on French.
>
> I have made a working ISO, just needs a new pull of the relea
Does anyone here know of any let or hindrance why 2.8 can't be
released this weekend?
We have Spanish and Chinese doc translations on the way, and I have
given up on French.
I have made a working ISO, just needs a new pull of the release
version to be finalised.
I have documented installing with
46 matches
Mail list logo
