Guys
IoT products, they seem to not be a included in this directive. And that’s
because of its low power consumptions nature ?
BR
Amund
Fra: Charlie Blackham
Sendt: 1. juni 2024 21:11
Til: EMC-PSTC@LISTSERV.IEEE.ORG
Emne: Re: [PSES] Declaration of Conformity
Scott
The
t;
> Registered in England and Wales, number 05466247
>
>
>
> *From:* Scott Xe
> *Sent:* Saturday, June 1, 2024 2:33 AM
> *To:* EMC-PSTC@LISTSERV.IEEE.ORG
> *Subject:* [PSES] Declaration of Conformity
>
>
>
> Hello Experts,
>
>
>
> According to the Ecodes
Tel: +44 (0)7946 624317
Web: https://sulisconsultants.com/
Registered in England and Wales, number 05466247
From: Scott Xe
Sent: Saturday, June 1, 2024 2:33 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Declaration of Conformity
Hello Experts,
According to the Ecodesign Directive (EU) 2009
Hello Experts,
According to the Ecodesign Directive (EU) 2009/125, manufacturers must draw
up a declaration of conformity for covered products. However, the Energy
Labelling Regulation (EU) 2017/1369 does not explicitly mention this
requirement.
Is a declaration of conformity also mandatory for
Doug, applicable CSA reg is RSS-247. We put "ICES-003" on our label. Brian
-- Forwarded Message --
From: Douglas Nix
Subject: Re: [PSES] ISED Requirements for Self-Declaration of Conformity
Date: Thu, 22 Feb 2024 15:55:30 -0500
Hi Brian,
Do you know which ICE
y firm shall be understood as neither given nor endorsed by it.
From: Brian Gregory
Sent: Thursday, February 22, 2024 1:55 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] ISED Requirements for Self-Declaration of Conformity
Hello fellow EMC Nerds,
I had posted a time or two on our EMC issues
h improved results compared to the originally
> approved unit, we've been able to attest to compliance via the SELF
> DECLARATION of CONFORMITY (SDoC) process as defined in the FCC guidance
> documents for our unit under the Class 1 Permissive Change (C1PC) rules, re:
> Part 47
Hello fellow EMC Nerds, I had posted a time or two on our EMC issues with a
unit that has a class B certified WiFi/BT module. With improved results
compared to the originally approved unit, we've been able to attest to
compliance via the SELF DECLARATION of CONFORMITY (SDoC) proce
.
Where compliance of radio equipment with the applicable requirements has been
demonstrated by that conformity assessment procedure, manufacturers shall draw
up an EU declaration of conformity and affix the CE marking
Best regards
Charlie
Charlie Blackham
Sulis Consultants Ltd
Tel: +44 (0)7946
47
>
>
>
> *From:* Scott Xe
> *Sent:* 24 February 2021 13:46
> *To:* EMC-PSTC@LISTSERV.IEEE.ORG
> *Subject:* [PSES] EU Declaration of Conformity (DoC)
>
>
>
> Does the DoC only provide references to the directives or regulations that
> require DoC? Other non-r
>
>
>
> Dan
>
>
>
> *From:* Scott Xe [mailto:scott...@gmail.com]
> *Sent:* Wednesday, February 24, 2021 8:46 AM
> *To:* EMC-PSTC@LISTSERV.IEEE.ORG
> *Subject:* [PSES] EU Declaration of Conformity (DoC)
>
>
>
> Does the DoC only provide references to
Best regards
Charlie
Charlie Blackham
Sulis Consultants Ltd
Tel: +44 (0)7946 624317
Web: https://sulisconsultants.com/
Registered in England and Wales, number 05466247
From: Scott Xe
Sent: 24 February 2021 13:46
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] EU Declaration of Conformity (DoC)
Does
topic though.
Stay safe, stay well.
Dan
From: Scott Xe [mailto:scott...@gmail.com]
Sent: Wednesday, February 24, 2021 8:46 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] EU Declaration of Conformity (DoC)
Does the DoC only provide references to the directives or regulations that
Does the DoC only provide references to the directives or regulations that
require DoC? Other non-required directives or regulations should not be
included in the DoC. For examples, GPSD, packaging waste, battery, energy
label, etc.
Thanks and regards,
Scott
-
-
eu/CENELEC/Guides/CLC/13_CENELECGuide13.pdf,
"EN IEC" now means the EN standard is identical with the corresponding
IEC standard.
> As for the EU Declaration of Conformity, are we only to
> state that a product meets, EN 62311:2008, when in fact, the product was
> tested to the 20
in the name or what it implies
or its significance. As for the EU Declaration of Conformity, are we only to
state that a product meets, EN 62311:2008, when in fact, the product was
tested to the 2020 version, or the latest version, even though the latest
version is not in the European Journa
Hi Matthew,
See below inline comments.
From: Matthew Wilson | GBE
Sent: Wednesday, 10 April 2019 11:51 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Product Declaration of Conformity with external PSU...
A consumer product is powered by AA cells but also can derive its power from
] Product Declaration of Conformity with external PSU...
I still don't see why having a power supply in
the same box causes a battery-operated product to be subject to
the LVD. It just doesn't seem sufficient reason to justify the
cost of p
its for the lvd, such as 5 or 12 voltDC , then the lvd does not apply
Gert
Verstuurd vanaf mijn iPhone
Op 10 apr. 2019 om 18:03 heeft John Woodgate <mailto:j...@woodjohn.uk>> het volgende geschreven:
I think:
/Should the product's EU Declaration of Conformity list the LVD
direc
oltDC , then the lvd does not apply
Gert
Verstuurd vanaf mijn iPhone
Op 10 apr. 2019 om 18:03 heeft John Woodgate <mailto:j...@woodjohn.uk>> het volgende geschreven:
I think:
/Should the product's EU Declaration of Conformity list the LVD
directive? If so is it acceptable t
I think:
/Should the product's EU Declaration of Conformity list the LVD
directive? If so is it acceptable to list 'LVD only with specific
'manufacturer ABC' 'model XYZ' PSU as a clause in the DoC? I've not ever
seen that done but don't see why that
he product. The PSU does not
carry the product manufacturer's logo but that of the PSU manufacturer (or
possibly its importer/distributor assuming the responsibility of manufacturer
because it will inevitably be made in Far East).
Should the product's EU Declaration of Conformity li
ineer
Allen & Heath Ltd.
Kernick Industrial estate,
Penryn,
Cornwall. TR10 9LU. UK.
Tel: 01326 372070
Email: ian.mcbur...@allen-heath.com
From: John Woodgate
Sent: 18 January 2019 15:39
To: McBurney, Ian ; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Spare parts requiring an EU declaration of C
AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Spare parts requiring an EU declaration of Conformity.
[External Email]
Dear Colleagues.
Can anyone point me to the relevant section in the EU directives regarding the
shipping of spares into the EU?
We are shipp
arts requiring an EU declaration of
Conformity.
Your simplest course is not to argue but give them the DoC they want.
As you say, Turkey is not in the EU, so it could, if it wanted,
require a DoC written on parchment, with gold lettering.
Best wishes
John Woodgate OOO-Own Opinions Only
J M Woodgate
, Essex UK
On 2019-01-18 09:50, McBurney, Ian wrote:
Dear Colleagues.
Can anyone point me to the relevant section in the EU directives
regarding the shipping of spares into the EU?
We are shipping a spare PSU PCB assembly into Turkey and the Turkish
customs want a Declaration of Conformity
Dear Colleagues.
Can anyone point me to the relevant section in the EU directives regarding the
shipping of spares into the EU?
We are shipping a spare PSU PCB assembly into Turkey and the Turkish customs
want a Declaration of Conformity document. I know Turkey is not in the EU but
they are
Declaration of Conformity
Hi
Should all DoC be updated now to reflect the new EMC directive? The Blue Guide
in section 2.10 suggests DoC for old directive are still valid but then goes on
to say:
“As of their entry into force, the EU Declaration of conformity will need to
include the reference to the
Hi
Should all DoC be updated now to reflect the new EMC directive? The Blue Guide
in section 2.10 suggests DoC for old directive are still valid but then goes on
to say:
“As of their entry into force, the EU Declaration of conformity will need to
include the reference to the new Directives
They could have combined the
weighing and EMC declarations.
-Dave
-Original Message-
From: Crane, Lauren [mailto:lauren.cr...@kla-tencor.com]
Sent: Friday, January 16, 2015 1:41 PM
To: Nyffenegger, Dave; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: CE Declaration of Conformity
Dave
A DoI is only
Surely if you declare compliance with any particular Directive on your
Declaration then you must follow the attestation procedures for that Directive.
On the basis of a quick look, there is no attestation route under the NAWID
which does not require some form of Notified Body intervention. I kno
This makes sense. Thanks
-Dave
-Original Message-
From: Nick Williams [mailto:nick.willi...@conformance.co.uk]
Sent: Friday, January 16, 2015 2:46 PM
To: Nyffenegger, Dave
Cc: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] CE Declaration of Conformity
Surely if you declare compliance
weighing and EMC declarations.
-Dave
-Original Message-
From: Crane, Lauren [mailto:lauren.cr...@kla-tencor.com]
Sent: Friday, January 16, 2015 1:41 PM
To: Nyffenegger, Dave; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: CE Declaration of Conformity
Dave
A DoI is only defined for the Machinery
-Original Message-
From: Nyffenegger, Dave [mailto:dave.nyffeneg...@bhemail.com]
Sent: Friday, January 16, 2015 12:14 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] CE Declaration of Conformity
Hi folks,
I design and manufacture light machinery that includes some sub-assemblies
which
...@bhemail.com]
Sent: Friday, January 16, 2015 10:14 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] CE Declaration of Conformity
Hi folks,
I design and manufacture light machinery that includes some sub-assemblies
which we purchase and integrate. The sub-assemblies come with their own DoI.
In
Hi folks,
I design and manufacture light machinery that includes some sub-assemblies
which we purchase and integrate. The sub-assemblies come with their own DoI.
In particular I may integrate automatic and non-automatic weighing scales that
would come with a DoI or DoC for the machinery and d
Whilst it's (only) a "guide", section 4.4 of the recently updated Blue Guide
has quite a bit of information on EU Declaration of Conformity:
http://ec.europa.eu/enterprise/policies/single-market-goods/documents/internal-market-for-products/new-legislative-framework/index_
guidance and may not be applicable to your product
-Original Message-
From: Scott Xe [mailto:scott...@gmail.com]
Sent: Wednesday, June 25, 2014 9:54 AM
To: Tyra, John; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: Definition of Declaration of Conformity
Hi John,
The info is clear that DoC is
; From: Scott Xe [mailto:scott...@gmail.com]
> Sent: Tuesday, June 24, 2014 12:30 PM
> To: EMC-PSTC@LISTSERV.IEEE.ORG
> Subject: [PSES] Definition of Declaration of Conformity
>
> In the field, lots of people such as customers, market surveillances, customs,
> etc. are asking for a D
wrote:
> Hi Scott,
>
> CE Marking and associated Declaration of Conformity is complicated when viewed
> as a whole but greatly simplifies when considered for just a single product
> (including variants).
>
> It's almost impossible to give a 'universal' a
Hi Scott,
CE Marking and associated Declaration of Conformity is complicated when viewed as a whole but greatly simplifies when considered for just a single product (including variants).
It's almost impossible to give a 'universal' answer because whilst there are common
John has provided the essential stuff.
Some of my employer's customers seem to get the Declaration of Conformity
confused with a (contractual) 'Certificate of Conformity'. Methinks the
important stuff is framed by the how the document meets the directives'
requirements
scott...@gmail.com]
Sent: Tuesday, June 24, 2014 12:30 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Definition of Declaration of Conformity
In the field, lots of people such as customers, market surveillances, customs,
etc. are asking for a DoC on particular product and/or its variants in Europe.
Wh
In the field, lots of people such as customers, market surveillances,
customs, etc. are asking for a DoC on particular product and/or its variants
in Europe. What is the exact meaning of the DoC? Is it the one to support
the compliance of CE mark? Or the compliance of all legal requirements
(mor
and forth with signatures.
-Dave
From: ce-test, qualified testing bv - Gert Gremmen [mailto:g.grem...@cetest.nl]
Sent: Saturday, March 01, 2014 4:51 AM
To: Nyffenegger, Dave; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: [PSES] EU Declaration of Conformity
Dave et all
Note that however correct the int
l.com]
Verzonden: zaterdag 1 maart 2014 4:34
Aan: EMC-PSTC@LISTSERV.IEEE.ORG
Onderwerp: Re: [PSES] EU Declaration of Conformity
Thanks. The explanatory pages seem to be consistent with my
interpretation.
-Dave
From: Nick Williams [mailto:nick.willi...@conformance.co.uk]
Sent: Friday, Februa
Thanks. The explanatory pages seem to be consistent with my interpretation.
-Dave
From: Nick Williams [mailto:nick.willi...@conformance.co.uk]
Sent: Friday, February 28, 2014 3:54 PM
To: Nyffenegger, Dave
Cc: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] EU Declaration of Conformity
Dave
r legal person established
> in the Community who has received a written mandate from the manufacturer to
> perform on his behalf all or part of the obligations and formalities
> connected with this Directive;"
>
> ANNEX II declares
>
> "The EC declaration of
ity who has received a written mandate from the manufacturer to
perform on his behalf all or part of the obligations and formalities connected
with this Directive;"
ANNEX II declares
"The EC declaration of conformity must contain the following particulars:
2. name and address
The reason for this is that the workplace safety requirements introduced under
Article 137 of the TFEU require an employer to ensure that equipment which they
supply for the use of their employees complies with the applicable essential
requirements. The Declaration is a useful piece of paper to
a bound manual completely impossible and impractical.
Thanks for the information and references.
The Other Brian
From: Nick Williams [mailto:nick.willi...@conformance.co.uk]
Sent: Tuesday, December 03, 2013 10:47 AM
To: Kunde, Brian
Cc: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Declaration
-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Declaration of Conformity
It is a requirement of the Machinery Directive that a copy of the declaration
be supplied with each machine. Whether it should be a DoI or DoC will depend
on the circumstances, but either way it should be something tha
all,
Mark
From: John Cotman [mailto:john.cot...@conformance.co.uk]
Sent: Monday, December 02, 2013 12:42 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Declaration of Conformity
It is a requirement of the Machinery Directive that a copy of the declaration
be supplied with each machine
ent of a DoI has to carry out further work to bring the equipment
into full compliance, so they need to know what that work involves.
JohnC
_
From: Crane, Lauren [mailto:lauren.cr...@kla-tencor.com]
Sent: 02 December 2013 15:58
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES]
<mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Sent: Monday, November 25, 2013 2:14:23 PM
Subject: [PSES] Declaration of Conformity
Hello List,
I need some help. I am very new to the Machinery Directive and my customer
received a non-conformance from their customer about their DoC. It appears that
my
iance Engineer
Graco Inc.
- Original Message -
From: "Mark Schmidt"
To: EMC-PSTC@LISTSERV.IEEE.ORG
Sent: Monday, November 25, 2013 2:14:23 PM
Subject: [PSES] Declaration of Conformity
Hello List,
I need some help. I am very new to the Machinery Directive
Hello List,
I need some help. I am very new to the Machinery Directive and my customer
received a non-conformance from their customer about their DoC. It appears that
my customer's distributor generated a DoI, and it appears that it needs to be a
DoC and most importantly their complaint is that
.
Gert Gremmen
-Oorspronkelijk bericht-
Van: emc-p...@ieee.org [mailto:emc-p...@ieee.org] Namens John Woodgate
Verzonden: donderdag 14 februari 2013 16:23
Aan: EMC-PSTC@LISTSERV.IEEE.ORG
Onderwerp: Re: Class A or Class B on Declaration of Conformity
In message
In message
<7B9D892F88F070469771832D78B3086E062AF24B@013-BR1MPN1-012.MGDPBI.global.p
vt>, dated Thu, 14 Feb 2013, Jim Hulbert writes:
However, if the product assessment (most likely a test report) shows
the product complies with Class A limits but not the Class B limits,
the warning statement
e.org [mailto:emc-p...@ieee.org] On Behalf Of John Woodgate
Sent: Thursday, February 14, 2013 9:24 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: Class A or Class B on Declaration of Conformity
In message
<7B9D892F88F070469771832D78B3086E062AC1C4@013-BR1MPN1-012.MGDPBI.global.p
vt>, dated Thu, 14 Fe
Of Jim Hulbert
Sent: 14. februar 2013 14:49
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: Class A or Class B on Declaration of Conformity
Thanks for the responses. However, this also brings me to a follow-up
question. EN55022 in clause 4.2 states that for Class A ITE a warning shall
be included
TC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Class A or Class B on Declaration of Conformity
Jim,
Good question regarding statements in the standard that is not covered in the
Directives. Do you really have to do them? If you are claiming compliance with
a directive via compliance to a harmonized sta
In message
<7B9D892F88F070469771832D78B3086E062AC1C4@013-BR1MPN1-012.MGDPBI.global.p
vt>, dated Thu, 14 Feb 2013, Jim Hulbert writes:
Thanks for the responses. However, this also brings me to a follow-up
question. EN55022 in clause 4.2 states that for Class A ITE a warning
shall be included
.@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Jim Hulbert
Sent: Thursday, February 14, 2013 8:49 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: Class A or Class B on Declaration of Conformity
Thanks for the responses. However, this also brings me to a follow-up
question. EN55022 in clause
V.IEEE.ORG
Subject: Re: Class A or Class B on Declaration of Conformity
A number of commercial products that I've worked on met the Class B limits with
margin. But since they were commercial products, and were not marketed to the
"public", marketing stayed with the Class A compl
dgate
>Sent: Wednesday, February 13, 2013 2:17 PM
>To: EMC-PSTC@LISTSERV.IEEE.ORG
>Subject: Re: Class A or Class B on Declaration of Conformity
>
>Not on the DoC but in your EMC Assessment statement. It could hardly be
>a requirement on the DoC because that would have to be specifi
ments is so annoying!
>
> From: "Crane, Lauren"
>To: Jim Hulbert ; "EMC-PSTC@LISTSERV.IEEE.ORG"
>
>Sent: Wednesday, February 13, 2013 5:44 PM
>Subject: RE: Class A or Class B on Declaration of Conformity
>
>
>
Tencor
From: Jim Hulbert [mailto:jim.hulb...@pb.com]
Sent: Wednesday, February 13, 2013 4:02 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Class A or Class B on Declaration of Conformity
On CE Declarations of Conformity, where EN 55022 standard has been referenced,
is it a requirement that the limit tha
Class A or Class B on Declaration of Conformity
Not on the DoC but in your EMC Assessment statement. It could hardly be
a requirement on the DoC because that would have to be specified in the
Directive.
Not all standards have 'Class A' and 'Class B', and those that do don
In message
<7B9D892F88F070469771832D78B3086E062A6FEA@013-BR1MPN1-012.MGDPBI.global.p
vt>, dated Wed, 13 Feb 2013, Jim Hulbert writes:
On CE Declarations of Conformity, where EN 55022 standard has been
referenced, is it a requirement that the limit that was applied (class
A or class B) also be
On CE Declarations of Conformity, where EN 55022 standard has been referenced,
is it a requirement that the limit that was applied (class A or class B) also
be stated? We show the limit on our DoCs, but some of our OEMs do not. I
can't find where it is actually required.
Jim Hulbert
___
document itself. No consolidated version
will be issued for including a corrigendum. Therefore, two documents will exist
separately.
In the light of this, you might declare this AC:2011 also on your EC DoC
declaration of conformity. But please do check this also with your National
Electrotechnic
8 februari 2013 19:37
To: John Woodgate; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: [PSES] EC Declaration of Conformity with standards and Amendments
Good answer!
__
James L. Knighten, Ph.D.
EMC Engineer
Teradata Corporation
17095 Via Del Campo
San Diego, CA 92127
858-485
Mobers Jan (ST-VS/EAP1.4-NL) would like to recall the message, "[PSES] EC
Declaration of Conformity with standards and Amendments".
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussio
, February 08, 2013 4:58 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] EC Declaration of Conformity with standards and Amendments
In message
,
dated Fri, 8 Feb 2013, "Mobers Jan (ST-VS/EAP1.4-NL)"
writes:
>A question came up for the EC DoC. The applicable standards with
>versio
In message
,
dated Fri, 8 Feb 2013, "Mobers Jan (ST-VS/EAP1.4-NL)"
writes:
A question came up for the EC DoC. The applicable standards with
version / year need to be mentioned.
But what about the some times applicable amendments of the standards so
called AC:x.
Acs are not amendment
Dear newsgroups readers
A question came up for the EC DoC. The applicable standards with version / year
need to be mentioned.
But what about the some times applicable amendments of the standards so called
AC:x.
For instance the EMC:
EN 55022:2010
EN 55022:2010/AC:2011
Does the AC:2011 also
To all who replied to my question regarding the need for an EU based signatory
to the Declaration of Conformity, Thank You. You confirmed what I already
knew. Much appreciated!
--
Doug Nix
Office: (519) 650-4753
Mobile (519) 729-5704
Skype: cic-inc
d...@complianceinsight.ca
@LISTSERV.IEEE.ORG
Subject: RE: Need for a EU Signature on a Declaration of Conformity??
Hi Doug,
I believe your client is in error. The Blue Guide
<http://ec.europa.eu/enterprise/policie
/single-market-goods/files/blue-guide/guidepublic_en.pdf> only indicates that
a person residing the EU is re
Community is entitled to
carry out all the certification procedures at his premises and, therefore, to
sign the declaration of conformity, unless otherwise provided for in the
directive(s).”
The EMC, LVD and R&TTE Directives do not require somebody domiciled within the
EC to sign the DoC. T
Colleagues,
I have recently heard from a client in the UK, that a Declaration of
Conformity is not valid without a signature from an EU entity. I cannot find
any legal basis that supports this. Can anyone enlighten me on this?
--
Doug Nix
Office: (519) 650-4753
Mobile (519) 729-5704
Skype: cic
In message
,
dated Tue, 3 Aug 2010, lauren_cr...@amat.com writes:
>Jumping in not having researched the full thread... be sure to see also
>the new framework directive/regulation on CE Marking that strives to
>provide legal certainly regarding these various economic actors
>(manufacturer's, d
sider the environment before printing this
e-mail.
John Woodgate
Sent by: emc-p...@ieee.org
08/03/2010 01:04 PM To
EMC-PSTC@LISTSERV.IEEE.ORG
cc
Subject
Re: EU Declaration of Conformity
In message
, dated
Tue, 3 Aug 2010,
In message
, dated
Tue, 3 Aug 2010, Carl Newton writes:
>I believe that this last statement, above, may apply to company B that
>is private-labeling a product manufactured by company A and placing it
>on the EU market. In this case, Company B assumes the role of the
>manufacturer and is res
I believe that we need to consider the definition of 'manufacturer' .
Consider the following from Section 3 of the Blue Guide:
"The manufacturer may design and manufacture the product himself. As an
alternative, he may have it designed, manufactured, assembled, packed,
processed or labelled with
In message <001801cb3329$482681f0$d600a...@tamuracorp.com>, dated Tue, 3
Aug 2010, Brian O'Connell writes:
>While the term 'agency' my not apply to that side of the cod pond,
>these institutions all have specific requirements for this when a
>product bears their mark.
But these are nothing to
In my particular example it is not a relabel, only a resell of an untouched
product.
From: Brian O'Connell [mailto:oconne...@tamuracorp.com]
Sent: Tuesday, August 03, 2010 12:31 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] EU Declaration of Conformity
While the term 'agen
mc-p...@ieee.org]On Behalf Of John
> Woodgate
> Sent: Monday, August 02, 2010 10:28 PM
> To: EMC-PSTC@LISTSERV.IEEE.ORG
> Subject: Re: EU Declaration of Conformity
>
> In message <002001cb3291$73038b90$d600a...@tamuracorp.com>,
> dated Mon, 2
> Aug 2010, Br
In message <002001cb3291$73038b90$d600a...@tamuracorp.com>, dated Mon, 2
Aug 2010, Brian O'Connell writes:
>You cannot operate on your own cognizance and wills if you re-label a
>product that bears the mark of an 'agency'.
I don't see that 'agency' applies in Europe. The manufacturer bears an
In message
<617df0128820f9458ac39149a627ee6c01a6981...@mbx.dialogic.com>, dated
Mon, 2 Aug 2010, Dan Roman writes:
>I hate to rehash this again, it has been discussed in the past but it
>seems every new twist or added detail raises doubts. If company A
>inside the EU resells a product from c
ay, August 02, 2010 1:45 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: EU Declaration of Conformity
EU legal experts,
I hate to rehash this again, it has been discussed in the past but it
seems every new twist or added detail raises doubts. If company A inside
the EU resells a product from company B outsid
EU legal experts,
I hate to rehash this again, it has been discussed in the past but it seems
every new twist or added detail raises doubts. If company A inside the EU
resells a product from company B outside the EU, then the companies are
jointly responsible for compliance is my understanding
Richard and all,
I encourage my customers to include the wording of the DoC in the
manual is a way that it will be translated when the manual is translated into
the needed languages of use.
One implementation of this is to print the DoC info in the manual
(not a pho
Richard,
Sec. 5.4 of of the EN Blue Guide reads:
"The EC declaration of conformity must be drawn up in one of the official
languages of the
Community. If the Community directives contain no further provisions
concerning the language of
the declaration, the requirements of the Member Stat
Dear Approvals Experts:
This question has probably been asked before, but here goes again: Is
it required, or advisable, to use multi-lingual Declaration of Confomities,
such that all of the information on the Declaration is provided in all of the
languages where the product will be mar
Sorry for the confusion.
Best wishes
Brian
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of
jharring...@f2labs.com
Sent: 23 April 2007 14:26
To: j...@jmwa.demon.co.uk; emc-p...@ieee.org
Subject: RE: Declaration of Conformity to new EMC Directive
John, Brian
Annex IV, section
In message , dated Mon,
23 Apr 2007, jharring...@f2labs.com writes:
>Annex IV, section 2 EC declaration of conformity, of the new directive
>includes
>
>- a dated reference to the specifications under which conformity is
>declared to ensure the conformity of the apparatus with
John, Brian
Annex IV, section 2 EC declaration of conformity, of the new directive
includes
- a dated reference to the specifications under which conformity is
declared to ensure the conformity of the apparatus with the provisions
of this Directive.
At the risk of sounding like a pedant, there
In message <200704231033.l3naxwhp009...@hormel7.ieee.org>, dated Mon, 23
Apr 2007, Brian Jones writes:
>My text that you quote below is from the Guide. I know that this is
>not legislation, but the Guide will be read by enforcement authorities
>as well as manufacturers, so enforcement authori
of
conformity.
Best wishes
Brian
Brian Jones
EMC Consultant
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of John
Woodgate
Sent: 23 April 2007 08:57
To: emc-p...@ieee.org
Subject: Re: Declaration of Conformity to new EMC Directive
In message <200704230740.l3n7e5vl
1 - 100 of 139 matches
Mail list logo
