On Thu, 3 Aug 2023 at 00:31, Sam Sokolik wrote:
> I have been pretty busy with life. - is it going to be updated at some
> point?
That seems to be hard to do.
> it did work for me - and I am not doing trivial stuff...
The only very serious bug I know of at the moment is:
Yes - understood. I knew it was an old image - but not how old.
I have been pretty busy with life. - is it going to be updated at some
point?
it did work for me - and I am not doing trivial stuff...
https://www.youtube.com/watch?v=nWCdqE5xd-c
sam
On Wed, Aug 2, 2023 at 9:39 AM andy pugh
On Sun, 30 Jul 2023 at 19:59, Sam Sokolik wrote:
> apt-get installed linuxcnc-uspace and was up and running within a few
> minutes after copying my configs..
It's probably worth mentioning that you get a fairly old snapshot of
LinuxCNC this way, dating from February.
--
atp
"A motorcycle is a
Just to chime in here
Rod Webster has been doing a bit of work here with fixing error finishing
read signals.
The realtek drivers that come with the buster iso are not very good and we
get a error finishing read error. This is with a good 4us latency
test. The network card is the issue
without issue.
>
> Todd Zuercher
> P. Graham Dunn Inc.
> 630 Henry Street
> Dalton, Ohio 44618
> Phone: (330)828-2105ext. 2031
>
> -Original Message-
> From: Todd Zuercher
> Sent: Monday, July 10, 2023 4:21 PM
> To: Enhanced Machine Controller (EMC)
&
Phone: (330)828-2105ext. 2031
-Original Message-
From: Todd Zuercher
Sent: Monday, July 10, 2023 4:21 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Installing From Debian?
[EXTERNAL EMAIL] Be sure links are safe.
Karl,
Have you tried installing Debian using one
to the complaints
to fix this bug.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Todd Zuercher
Sent: Monday, July 10, 2023 5:10 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Installing From Debian
ge-rt-amd64
linux-image-amd64
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Todd Zuercher
Sent: Monday, July 10, 2023 4:21 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Installing
: Karl Schmidt
Sent: Monday, July 10, 2023 2:39 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Installing From Debian?
[EXTERNAL EMAIL] Be sure links are safe.
@Todd -
Not likely a Debian problem - I would have to see his /etc/apt/sources.list to
know what is going
@Todd -
Not likely a Debian problem - I would have to see his /etc/apt/sources.list to
know what is going on.
To upgrade you also need something like this in
/etc/apt.conf.d/local
APT::Default-Release "/^bookworm(|-security|-updates)$/";
He says this is on an old MacBook (A1278) - that is
with the real-time kernal without a hitch.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: andy pugh
Sent: Saturday, July 08, 2023 1:29 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Installing
the NO_PUBKEY ... isn't available.
And apt-key is deprecated.
OTOH, no trouble installing the Arduino IDE.
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: July 8, 2023 1:33 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users]
Same error. Unable to locate package. Sudo apt-get install does work as I
downloaded and installed lazarus.
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: July 8, 2023 1:33 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-us
On Sat, 8 Jul 2023 at 21:31, John Dammeyer wrote:
> sudo apt-get install linuxcnc
> It reported an error
> E: Unable to locate package linuxcnc
It's actually linuxcnc-uspace
(Maybe it shouldn't be any more, but I guess we are stuck with that now)
--
atp
"A motorcycle is a bicycle with a
age-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: July 8, 2023 10:29 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Installing From Debian?
>
> On Thu, 6 Jul 2023 at 02:59, Todd Zuercher
> wrote:
> >
> > Any one installed Debian 1
On Thu, 6 Jul 2023 at 02:59, Todd Zuercher wrote:
>
> Any one installed Debian 12 and running Linuxcnc on a machine?
I recently did a clean install on my Macbook (I can now dual-boot
simultaneously: https://photos.app.goo.gl/jEjzzJmjDVqouQh79 )
It went very smoothly. I downloaded the ISO, put
Just did that.
I had earlier tried to move to bullseye - but a glade problem got in my way -
So just 2 days ago - I first upgraded from buster to bullseye - then bullseye to bookworm - installed linuxcnc from the
debian repository.
Good overview of upgrade at
gt; 630 Henry Street
> Dalton, Ohio 44618
> Phone: (330)828-2105ext. 2031
>
> -Original Message-
> From: Thaddeus Waldner mailto:thadw...@gmail.com>>
> Sent: Wednesday, July 05, 2023 10:51 PM
> To: Enhanced Machine Controller (EMC) <mailto:emc-users@lists.sourcefo
-2105ext. 2031
-Original Message-
From: Thaddeus Waldner
Sent: Wednesday, July 05, 2023 10:51 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Installing From Debian?
[EXTERNAL EMAIL] Be sure links are safe.
I just set up a replacement computer for an existing machine
I just set up a replacement computer for an existing machine. The part I had
the most trouble with turned out to be caused by a wifi router being
misconfigured. Once that was ironed out, system took off without a hitch and
has been running trouble-free for several days now.
I followed the
Any one installed Debian 12 and running Linuxcnc on a machine? Since Linuxcnc
is now in Debian Stable, I was wondering if anyone cared to voice their
opinions about installing and running Linuxcnc that way.
I have a machine that I am starting to refit and I am considering trying to
install
21 matches
Mail list logo