2012/1/5 andy pugh bodge...@gmail.com:
On 4 January 2012 23:48, Eric Keller eekel...@psu.edu wrote:
do you have any pictures of it set up?
https://picasaweb.google.com/lh/photo/CQTCSBXP42w4qc8viPm_ztMTjNZETYmyPJy0liipFm0?feat=directlink
(In that picture is the D510MO motherboard, PicoPSU,
On 6 January 2012 10:27, Viesturs Lācis viesturs.la...@gmail.com wrote:
How is 5i23 mounted? I do not see that it is fixed anywhere.
In that picture it is just sat there in the PCI connectors. Since then
I have added a bracket from the mounting holes onto the aluminium
mounting plate.
--
atp
On 5 January 2012 01:59, Kent A. Reed knbr...@erols.com wrote:
Did the flexible riser work for you before it started losing wires? How
is it that it started losing wires? Do you mean conductors were breaking
internally in the cable? breaking at the connector? .
It was fine, though meant that
2012 9:19 AM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] Riser for Intel Mini-ITX
I finally found a PCI riser that works with the mini-ITX Intel boards
(D510 and D525)
It puts the Mesa card over the motherboard, with the connectors facing up.
http://www.ebay.co.uk/itm/PCIx1-2U
On 01/04/2012 07:09 PM, andy pugh wrote:
On 4 January 2012 23:48, Eric Kellereekel...@psu.edu wrote:
do you have any pictures of it set up?
https://picasaweb.google.com/lh/photo/CQTCSBXP42w4qc8viPm_ztMTjNZETYmyPJy0liipFm0?feat=directlink
(In that picture is the D510MO
On 5 January 2012 10:39, Mark Wendt mark.we...@nrl.navy.mil wrote:
How do you deal with the enclosure, getting the peripheral card ports so
that they poke through to the exterior?
Mainly by putting everything in one big box. I think it makes sense to
treat the PC board as just another
On 01/05/2012 06:01 AM, andy pugh wrote:
On 5 January 2012 10:39, Mark Wendtmark.we...@nrl.navy.mil wrote:
How do you deal with the enclosure, getting the peripheral card ports so
that they poke through to the exterior?
Mainly by putting everything in one big box. I think it
: [Emc-users] Riser for Intel Mini-ITX
On 5 January 2012 10:39, Mark Wendt mark.we...@nrl.navy.mil wrote:
How do you deal with the enclosure, getting the peripheral card ports so
that they poke through to the exterior?
Mainly by putting everything in one big box. I think it makes sense to
treat
On 5 January 2012 13:41, Edward Bernard yankeelena2...@yahoo.com wrote:
How do you deal with cooling issues having all that gear in one enclosure?
I don't know yet.
The actual servo drives will be external (and near the motors) though,
so the only heat in there should be from the low-power
On 1/5/2012 8:45 AM, andy pugh wrote:
On 5 January 2012 13:41, Edward Bernardyankeelena2...@yahoo.com wrote:
How do you deal with cooling issues having all that gear in one enclosure?
I don't know yet.
The actual servo drives will be external (and near the motors) though,
so the
On 5 January 2012 16:07, Dave e...@dc9.tzo.com wrote:
The Intel bios has a display that will show you the CPU core temperature
so you can get an idea of how efficiently your enclosure is keeping your
PC boards cool.
I think that there is a HAL module that links in to lmsensors to
allow you to
On 1/5/2012 11:07 AM, Dave wrote:
On 1/5/2012 8:45 AM, andy pugh wrote:
On 5 January 2012 13:41, Edward Bernardyankeelena2...@yahoo.com wrote:
How do you deal with cooling issues having all that gear in one enclosure?
I don't know yet.
The actual servo drives will be external (and near
On 1/5/2012 11:29 AM, Kent A. Reed wrote:
On 1/5/2012 11:07 AM, Dave wrote:
On 1/5/2012 8:45 AM, andy pugh wrote:
On 5 January 2012 13:41, Edward Bernardyankeelena2...@yahoo.comwrote:
How do you deal with cooling issues having all that gear in one enclosure?
On 1/5/2012 11:16 AM, andy pugh wrote:
On 5 January 2012 16:07, Davee...@dc9.tzo.com wrote:
The Intel bios has a display that will show you the CPU core temperature
so you can get an idea of how efficiently your enclosure is keeping your
PC boards cool.
I think that there is a
Kent A. Reed wrote:
Apart from our natural conservatism, is there any reason y'all with big
systems aren't watercooling within a sealed box, piping the heat to an
external radiator?
Well, it is expensive, and for most systems it is now somewhat
old-school and unnecessary!
The Atom
On Thursday, January 05, 2012 12:27:01 PM Dave did opine:
On 1/5/2012 8:45 AM, andy pugh wrote:
On 5 January 2012 13:41, Edward Bernardyankeelena2...@yahoo.com
wrote:
How do you deal with cooling issues having all that gear in one
enclosure?
I don't know yet.
The actual servo
Just an FYI, I have an Intel MD525MW motherboard, 4gig ram, and disk. The
smallest case my supplier could get had a small fan on the power supply, and a
fan for case cooling so I guess I could say that my motherboard is fan-cooled,
but that's just life.
Had to turn off hyper threading on the
On Thursday, January 05, 2012 01:45:41 PM gene heskett did opine:
On Thursday, January 05, 2012 12:27:01 PM Dave did opine:
On 1/5/2012 8:45 AM, andy pugh wrote:
On 5 January 2012 13:41, Edward Bernardyankeelena2...@yahoo.com
wrote:
How do you deal with cooling issues having all that
On 1/5/2012 12:14 PM, Dave wrote:
On 1/5/2012 11:29 AM, Kent A. Reed wrote:
On 1/5/2012 11:07 AM, Dave wrote:
On 1/5/2012 8:45 AM, andy pugh wrote:
On 5 January 2012 13:41, Edward Bernardyankeelena2...@yahoo.com
wrote:
How do you deal with cooling issues having all that gear in one
On Thursday, January 05, 2012 04:08:54 PM Kent A. Reed did opine:
On 1/5/2012 12:14 PM, Dave wrote:
On 1/5/2012 11:29 AM, Kent A. Reed wrote:
On 1/5/2012 11:07 AM, Dave wrote:
On 1/5/2012 8:45 AM, andy pugh wrote:
On 5 January 2012 13:41, Edward Bernardyankeelena2...@yahoo.com
On 1/5/2012 2:18 PM, Kent A. Reed wrote:
On 1/5/2012 12:14 PM, Dave wrote:
On 1/5/2012 11:29 AM, Kent A. Reed wrote:
On 1/5/2012 11:07 AM, Dave wrote:
On 1/5/2012 8:45 AM, andy pugh wrote:
On 5 January 2012 13:41, Edward Bernardyankeelena2...@yahoo.com
andy
had the damndest thing with a flexy dual riser
http://www.logicsupply.com/products/pci122_dflex
my d150m0 ran a dual pci parport fine for months
and it same card recognized in the new flexi riser along with a pci
8255 ( sudo lshw )
but emc swore the parport was 'already in use'
i strippedit
On Thursday, January 05, 2012 07:07:03 PM Dave did opine:
On 1/5/2012 2:18 PM, Kent A. Reed wrote:
On 1/5/2012 12:14 PM, Dave wrote:
On 1/5/2012 11:29 AM, Kent A. Reed wrote:
On 1/5/2012 11:07 AM, Dave wrote:
On 1/5/2012 8:45 AM, andy pugh wrote:
On 5 January 2012 13:41, Edward
I finally found a PCI riser that works with the mini-ITX Intel boards
(D510 and D525)
It puts the Mesa card over the motherboard, with the connectors facing up.
http://www.ebay.co.uk/itm/PCIx1-2U-32Bit-Riser-PCITX4-2-Rev-B-/110793930515
The previous 2 I tried stopped the machine booting, and the
do you have any pictures of it set up?
On Wed, Jan 4, 2012 at 5:19 PM, andy pugh bodge...@gmail.com wrote:
I finally found a PCI riser that works with the mini-ITX Intel boards
(D510 and D525)
It puts the Mesa card over the motherboard, with the connectors facing up.
On 4 January 2012 23:48, Eric Keller eekel...@psu.edu wrote:
do you have any pictures of it set up?
https://picasaweb.google.com/lh/photo/CQTCSBXP42w4qc8viPm_ztMTjNZETYmyPJy0liipFm0?feat=directlink
(In that picture is the D510MO motherboard, PicoPSU, DOM SATA drive,
12V CPU, Arduino, resolver
On Wednesday, January 04, 2012 08:41:42 PM andy pugh did opine:
On 4 January 2012 23:48, Eric Keller eekel...@psu.edu wrote:
do you have any pictures of it set up?
https://picasaweb.google.com/lh/photo/CQTCSBXP42w4qc8viPm_ztMTjNZETYmyPJ
y0liipFm0?feat=directlink
(In that picture is the
On 1/4/2012 5:19 PM, andy pugh wrote:
I finally found a PCI riser that works with the mini-ITX Intel boards
(D510 and D525)
It puts the Mesa card over the motherboard, with the connectors facing up.
http://www.ebay.co.uk/itm/PCIx1-2U-32Bit-Riser-PCITX4-2-Rev-B-/110793930515
The previous 2 I
On Wed, Jan 04, 2012 at 10:19:25PM +, andy pugh wrote:
I finally found a PCI riser that works with the mini-ITX Intel boards
(D510 and D525)
It puts the Mesa card over the motherboard, with the connectors facing up.
With the Mesa board handling the low-level code is it possible to run
the
On Wed, 4 Jan 2012, Ben Jackson wrote:
Date: Wed, 4 Jan 2012 18:11:58 -0800
From: Ben Jackson b...@ben.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Riser
30 matches
Mail list logo
