On 16 January 2012 05:42, a...@conceptmachinery.com wrote:
i there spindle motor and motor drive that can be better used for tapping?
You can monitor motor current on any drive, sometimes it is built in
to the drive, but otherwise there are various forms of current sensing
element that can be
Sure you look at the tap before using it... if it is worn out toss it
out. New taps are much cheaper than removing a broken tap. All it takes
it a 10x and one eye and one second of time.
John
On 1/15/2012 11:42 PM, a...@conceptmachinery.com wrote:
Hi
i there spindle motor and motor drive
-users] tapping problem?
Hi
i there spindle motor and motor drive that can be better used for tapping?
Problem with use tap is that spindle motor can easy crash tap and after
that extra charge - + equipment - to remove broke tap from hole.
Every one try to get max from each tap and many times
-users] tapping problem?
Hi
i there spindle motor and motor drive that can be better used for
tapping?
Problem with use tap is that spindle motor can easy crash tap and after
that extra charge - + equipment - to remove broke tap from hole.
Every one try to get max from each tap and many times
a...@conceptmachinery.com wrote:
Hi
i there spindle motor and motor drive that can be better used for tapping?
Problem with use tap is that spindle motor can easy crash tap and after
that extra charge - + equipment - to remove broke tap from hole.
I have been using rigid tapping with EMC2
a...@conceptmachinery.com wrote:
Hi
i there spindle motor and motor drive that can be better used for
tapping?
Problem with use tap is that spindle motor can easy crash tap and after
that extra charge - + equipment - to remove broke tap from hole.
I have been using rigid tapping with EMC2
On Monday, January 16, 2012 04:29:38 PM Jon Elson did opine:
a...@conceptmachinery.com wrote:
Hi
i there spindle motor and motor drive that can be better used for
tapping? Problem with use tap is that spindle motor can easy crash
tap and after that extra charge - + equipment - to remove
On Monday, January 16, 2012 04:35:12 PM a...@conceptmachinery.com did opine:
a...@conceptmachinery.com wrote:
Hi
i there spindle motor and motor drive that can be better used for
tapping?
Problem with use tap is that spindle motor can easy crash tap and
after that extra charge - +
a...@conceptmachinery.com wrote:
a...@conceptmachinery.com wrote:
Hi
i there spindle motor and motor drive that can be better used for
tapping?
Problem with use tap is that spindle motor can easy crash tap and after
that extra charge - + equipment - to remove broke tap from hole.
I have been
a...@conceptmachinery.com wrote:
Hi
Tapping cycle use very slow motion, why drive can not stop motion of spindle?
if max rpm for tapping around 100 rpm , can drive stop spindle ?
it is possible to program for 70% or torque that actually will crash tap,
to have some safety
Is 1200 RPM slow? I
Ed wrote:
If Fanuc, Siemens, Mazak, et al have not implemented torque limiting
for taps I would guess that it is much more difficult than it looks.
Yes, I would think that the spindle must come to a stop within 5 degrees
of rotation from
when the overload is detected. I think that
gene heskett wrote:
That was when I learned about EDM to remove the taps. :) Slow, but does
the job without hurting the hole. I have since built a better PSU for
that, works nicely but you can hear it running blocks away, very _VERY_
noisy, estimated 140db inside the teeny shop I have.
On Monday, January 16, 2012 11:00:35 PM Jon Elson did opine:
gene heskett wrote:
That was when I learned about EDM to remove the taps. :) Slow, but
does the job without hurting the hole. I have since built a better
PSU for that, works nicely but you can hear it running blocks away,
Hi
i there spindle motor and motor drive that can be better used for tapping?
Problem with use tap is that spindle motor can easy crash tap and after
that extra charge - + equipment - to remove broke tap from hole.
Every one try to get max from each tap and many times tap that look good
crashed
14 matches
Mail list logo