Ciao a tutti,
volevo avvertire che ho messo on line un piccolo how-to su come usare
kppp da utente in RH (cosi` chi usa root per questo motivo non ha piu`
scuse ;-)
Questo piccolo HowTo e` step to step e non dovrebbe essere difficoltoso
riuscire a metterlo in pratica (altrimenti scrivete 8-)
I would like to give thanks to those who offered suggestions as to
necessary configuration/setup for DSL service under Linux-Mandrake,
Civilme ,Vincent Danen Jean-Michelt Dault. Thank you for your advise and
direction. I have found that initially to setup infospeed dsl service
acount with
On Wed, 07 Jun 2000, you wrote:
"Dan Bélisle" wrote:
Hi !
I have downloaded the brand new 7.1 and unfortunately like it predecessor my
ATA/66 (HPT366) disk doesn't work !!
At the IDE detection at the begining of the installation, the installation
is stoped (stone) at this
Hi,
Can some please explain to me how to install dock apps in window maker.
I cxant figure where they go or wher to install them.
Thanks,
Ralph
--
WHER EVER YOUR HEAD GOES YOUR ASS WILL FOLLOW!! :-)
I know this may not be the forum for this question but I posted it on the newbie list
twice, and nobody seems to be able to give me an answer of what is happening. I know
this not a unique problem, because I saw two other posts with the same problem. Please
Help.
Thanks,
Greg DeYoung
I just
I selected the option of trying out xfree 4 in my upgrade to 7.1.
Does anyone know how to choose between the two from the console?
-- Stephen
On Thu, 08 Jun 2000, you wrote:
Instaling gcc make and automake on a instalation afther the normanl install
I get the following error on ./configure
-
checking whether the C compiler (gcc ) works... no
configure: error: installation or configuration problem: C compiler
cannot create
Running 7.1 with a SBLive, I can hear Linus' test audio message, but the second
test (a midi file, I think) fails with:
sox: Can't open output file'/dev/dsp': No such device
Any help on this one? Thanks.
-- Stephen
Just wanted to check this out before purchasing:
Can I have one 20 gig ATA-66 Maxtor hard drive on a BE6-II board as my only
hard disk?
Thanks.
-- Stephen
Or perhaps pole as in what is counted when one integrates along a
coutour that contains no zeroes internally--the highest point in
complex space. You have to watch out for those mathematicians,
Alan. .-)
Civileme
Alan Shoemaker wrote:
Denisin linuxpole.com the word pole means a long
Dear Alan and friends:
My deep apologies for getting myself and everybody else confused. Yes,
it's LinuxLand, NOT LinuxMart or LinuxMall. Glad I threw in the URL with
the right address.
Benjamin
Alan Shoemaker wrote:
Benjaminyes, exactly! LinuxLand is where I ordered my 7.1
2 CD set
Another possibility for the future is to have a Stable | Normal | Cutting-
Edge installation option. The "Stable" option would only install stable
releases of the software, "Normal" would be the standard install, and
"Cutting-Edge" would install the latest available releases - whether
stable or
On Wed, 07 Jun 2000 - Denis HAVLIK, you wrote:
| Hi, folks
|
| It feels strange when I have to reply to my own message but... I thought
| that "upgrade" is an extremely important topic, yet no one wants to
| discuss it. Does it mean that you are not interested (so we should stop
BenjaminI really don't think that 'deep apologies' are
necessary. :-) And maybe I was the only one that was
confused, duh!
Alan
Benjamin Sher wrote:
Dear Alan and friends:
My deep apologies for getting myself and everybody else confused. Yes,
it's LinuxLand, NOT LinuxMart or
Benjamin Sher wrote:
Dear Alan and friends:
My deep apologies for getting myself and everybody else confused. Yes,
it's LinuxLand, NOT LinuxMart or LinuxMall. Glad I threw in the URL with
the right address.
Benjamin
Alan Shoemaker wrote:
Benjaminyes, exactly! LinuxLand is
Hi folks,
just upgraded my system to MDK 7.1 and now
my StarOffice crashes when I open any documents...
Any evidences on your sites...???
Greets,
Andreas Spengler
E-Mail: [EMAIL PROTECTED]
WEB: www.spengler-netz.de
On Thu, 8 Jun 2000, Ralph wrote:
Hi,
Can some please explain to me how to install dock apps in window maker.
I cxant figure where they go or wher to install them.
But the binary in a suitable directory, f.eks. ~/bin, run it, and voila,
it pops up in the dock.
--
seb
On Thu, 8 Jun 2000, John Hawk wrote:
On Thu, 08 Jun 2000, you wrote:
Instaling gcc make and automake on a instalation afther the normanl install
I get the following error on ./configure
-
checking whether the C compiler (gcc ) works... no
configure: error: installation or
On Thu, 8 Jun 2000, Stephen Boulet wrote:
I selected the option of trying out xfree 4 in my upgrade to 7.1.
Does anyone know how to choose between the two from the console?
X is started witd /etc/X11/X, which is a symlink. So it can point to the
XF4 binary (XFree86), or the XF3 (XF86_*).
I reported this bug with 7.1 beta3 more than a week ago but I see it is
also present in the final 7.1 (Helium).
I did an "expert" install of Mandrake 7.1 (Helium) choosing practically
everything minus tetex, databases and some special development packages
which I don't need.
The bug:
The ICONS
I had this problem last week. Ended up being a corrupt Perl installation.
Reinstalled Perl and all is fine again.
-Original Message-
From: John Hawk [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 08, 2000 11:54 PM
To: [EMAIL PROTECTED]
Subject: Re: [expert] gcc compile error
On Thu,
I guess I should have put this in for the experts...I am a newbie
but I think maybe this is an expert question since I got no
response in the newbie list.
Thanks for anything helpful with this problem.
Bambi
Fran Parker wrote:
OK, now I am really stumped!
I got DOSEMU to work. I got some
Hello all,
I have a Matrox G400 dual-head card that I would
like to get the dual-head working with XFree86. I can
get the single monitor working with the greatest of
ease, but I cannot find anywhere documentation on how
to make the 2nd monitor come up. Will this require
Framebuffer support?
SBLive's latest snapshots are at:
http://opensource.creative.com
Look for a link to their ftp site where you can download emu10K snapshots.
The latest ones are nifty with MANY options in the mixer. They aren't hard
to install and while I haven't installed them in Mandrake yet, I've done it
MANY
There are a few changes I don't like so far and maybe someone can help.
First is the desktop right mouse click menus. Under new the only option is
folder.How can I add items to this menu?
Second thing is when clicking on a text document now it opens by default in
kless not the text
This may not apply, but doesn't 7.1 use another loader other than LILO?
Bambi
Greg DeYoung wrote:
I know this may not be the forum for this question but I posted it on the newbie list
twice, and nobody seems to be able to give me an answer of what is happening. I know
this not a unique
Now, where are the XF3 and XF4 binaries located? Furthermore, what's the
EASIEST way to search for a file (recursively)?
-Original Message-
From: Sebastian Dransfeld [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 09, 2000 2:24 AM
To: Stephen Boulet
Cc: [EMAIL PROTECTED]
Subject: Re:
On Thu, 8 Jun 2000, Stephen@Home wrote:
I just got my Shaw@home a couple of days ago and I don't think its that bad.
The up and down speeds are just fine and even though its dynamic ip's they
don't change very often so I can telnet/ftp/httpd/x session anyway.
BTW I'm in Calgary.
Hi
I second that...when free is as nice as gftp...why go elsewhere.
Bambi
Wolfgang Bornath wrote:
On Thu, Jun 08, 2000 at 09:41 -0400, Klar Brian D Contr MSG/SWS wrote:
A good GUI based FTP prog. is IglooFTP Pro.
Reminds me a lot of Cute FTP.
I'm using gFTP now for some time. It has a
Robert Kimball wrote:
Does anyone have a touchscreen driver for mandrake linux or know where i
could find one? it would really be appreciated. thank you.
Rob
Metro-X advertises to have touch screen support for $40 US.
www.metrolink.com
Never used them just recalled the ad. Your mileage
I upgraded last night with no obvious major problems. There are these
issues, though:
I have eth0 configured for my cable connection to my @home ISP. During
bootup, ippp0 is established. I've no clue what's up with that.
The control panel, accessed throughLinuxconf, has several duplicate
Below are currently discussed toppics on "linuxpole.com" (our experimental
public forum):
Policy: Guns versus Butter
Install: Automated Install
Install: Upgrade - what should it do?
Doc: What makes a documentation "good" or bad?
More to come...
cu
Denis
--
You are missing a compiler component or the compiler itself failed to
install. Put your Drake CDROM in then open /mnt/cdrom/Mandrake/RPMS look for
gcc files. I am at work on an NT box so I can't give you the actual name.
Then as root issue rpm -i gcc_whatever_version.rpm if I remember correctly
As far as _I_ know... yes. I have an ABIT BX6 Rev 2.0 mainboard and have 2
LARGE disks... what I did was partition my first disk in half, so that I had
2 Ext2 file systems... Just a suggestion.
Matt
-Original Message-
From: Stephen Boulet [mailto:[EMAIL PROTECTED]]
Sent: Friday, June
On Thu, 08 Jun 2000, you wrote:
On Wed, 07 Jun 2000, you wrote:
1) Netscape to use my windows directory so I can read mail from either OS (when I
contract in some Access Work, I can't pick my OS, and there's no good FTP client for
Linux, like Cute-FTP, not to mention the win-modem thing)
What i don't understand is that Denis from mandrake tell me that his test
with the HTP366 is good and work. But, if the patch is not apply, how he can
work for his and not for me ?
I have already read the UDMA66 Howto, but is not working...
Thanks again !
Danny.
From: "M Thompson" [EMAIL
Hi !
My drive is a Quantum Fireball KX 7200rpm 13.6gig.
Danny.
From: Don [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [expert] ATA/66 HPT366 with 7.1
Date: Thu, 8 Jun 2000 18:05:49 -0700
On Wed, 07 Jun 2000, you wrote:
"Dan Bélisle" wrote:
Hi !
Thank you !!
Danny.
From: "M Thompson" [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [expert] ATA/66 HPT366 with 7.1
Date: Thu, 08 Jun 2000 17:14:55 GMT
The Mandrake kernel doesn't ship with the IDE patch included. Suse
developed the patch but it is still
I wonder if any of you have made the upgrade to 7.1 and can tell me how it went. and
where you did get your files/CDs from. I bought mine from cheapbytes.com.
Hans
[EMAIL PROTECTED]
Hans, I've installed 7.1b1 and b3 with no trouble on up-to-date systems.
However, while trying to install
i would like to set my machine up as an ftp server. any suggestions
on which package to use or where to find guidance?
On 9 Jun, Brash, Matthew wrote:
Now, where are the XF3 and XF4 binaries located? Furthermore, what's the
EASIEST way to search for a file (recursively)?
find / -name \*filename\* -print
L
--
Laurent Duperval "Montreal winters are an intelligence test,
U|Force - Java
Wayne,
I have not yet been able to shake windows for a few tasks and I was =
wondering whether you can get any software to read ext2 filesystems =
under windows. I often DL stuff under Linux, boot into windows and then =
forget to xfer the stuff over which means a reboot blah blah blah.
freshmeat has a file; explore2fs
Explore2fs is a Windows program which allows read write support for
Linux filesystems, and works under NT, 95, 98
2000
-Original Message-From: Wayne Petherick
[mailto:[EMAIL PROTECTED]]Sent: Friday, June 09, 2000 9:29
AMTo: [EMAIL
Fran Parker wrote:
I don't get it. I installed the gaim-0.9.18-1.i386.rpm
and had none of these troubles.
Sorry,
Bambi
Civileme wrote:
"Alan N." wrote:
Ivan Trail wrote:
Hello.
After the recent discussion on getting Gaim 0.9.18, I tried it out. I can't
get
Just installed MDK 7.1 on a new Dell T850.
Generally went well...but, of course, there
are a few issues (e.g., sound!).
One is accessing the internal zip drive (atapi).
MDK configured this to use supermount (with desktop icon).
Access is no problem--stuck in disk and clicked on icon.
If you use KDE as one of your GUI interfaces:
I find Find in KDE works great for finding files on any of the partitions I have
including windows partitionssince you can search the entire / of the system.
You choose where you want to limit the search. Great program.
Bambi
"Brash, Matthew"
Thanks Denis...took advantage of the submission under two categories.
This is great to have a voice...who knows whether it will help or not,
but I appreciate the opportunity.
Bambi
Denis HAVLIK wrote:
Below are currently discussed toppics on "linuxpole.com" (our experimental
public forum):
On Fri, 9 Jun 2000, Wayne Petherick wrote:
I have not yet been able to shake windows for a few tasks and I was wondering
whether you can get any software to read ext2 filesystems under windows. I often DL
stuff under Linux, boot into windows and then forget to xfer the stuff over which
Yes it's called "grub" pretty nice although I have only used it once by
accident.
Mac
-Original Message-
From: Fran Parker [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 09, 2000 5:43 AM
To: [EMAIL PROTECTED]
Subject: Re: [expert]
This may not apply, but doesn't 7.1 use another loader
On Fri, 9 Jun 2000, Brash, Matthew wrote:
Now, where are the XF3 and XF4 binaries located? Furthermore, what's the
EASIEST way to search for a file (recursively)?
They are in /usr/X11R6/bin.
To find a file use "find /directory -name filename" or "find
/directory -depth|grep filename".
--
The Roaring Penguin PPPoE is included in 7.1, and of course you have to
use username@provider, at least with Magma and Sympatico.
Jean-Michel Dault
[EMAIL PROTECTED]
On Thu, 8 Jun 2000, Christopher Quale wrote:
Date: Thu, 08 Jun 2000 09:20:49 -0700
From: Christopher Quale [EMAIL PROTECTED]
I believe samba solves that problem?
Mac
-Original Message-
From: Wayne Petherick [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 09, 2000 6:29 AM
To: [EMAIL PROTECTED]
Subject: [expert] ext2 under windows
I have not yet been able to shake windows for a few tasks and I was
wondering
On Fri, 09 Jun 2000, you wrote:
On 9 Jun, Brash, Matthew wrote:
Now, where are the XF3 and XF4 binaries located? Furthermore, what's the
EASIEST way to search for a file (recursively)?
find / -name \*filename\* -print
Or, "locate filename" if it's been at least overnight
since you
John,
I thought I had read that somewhere. Good to know it is a nice one.
Thanks,
Bambi
"McDonald, John GSM1 (SIMASD)" wrote:
Yes it's called "grub" pretty nice although I have only used it once by
accident.
Mac
-Original Message-
From: Fran Parker [mailto:[EMAIL PROTECTED]]
At 12:44 PM 6/10/00 -0400, you wrote:
i would like to set my machine up as an ftp server. any suggestions on
which package to use or where to find guidance?
try proftpd (www.proftpd.net)
I really like proftpd easy config file to work with
On Sat, 10 Jun 2000 12:44:48 -0400, ryan geer said:
i would like to set my machine up as an ftp server. any suggestions
on which package to use or where to find guidance?
Well, lets see :
my system is a Celeron 366 with 64Megs RAM, All in Wonder Pro,
Realtek cheapy network card, Yamaha SAx sound card built into the
KA-6100 via chipset motherboard. USB (for scanner) that doesn't work.
ATAPI IDE (Acer, I think) 36X CDrom drive, Three western digital drives
1.6G,
By the way Civileme,
of course the computer has one floppy too.
But that wasn't why I was writing again.
Where did your gaim install?
My is in
/usr/bin/gaim
/usr/lib/gaim
and of course the normal doc and share locations.
Also there is one thing that is driving me nuts and
that is the
Just tried to look at how to edit the KDE menus in 7.1.
Appears to not be possible! Tried both of the following:
1.) K | Panel | Edit Menus
Does nothing
2.) right-click on K | Properties
get the message: The menu editor is not installed.
Now I know that a
sam feagins wrote:
Hello all,
I have a Matrox G400 dual-head card that I would
like to get the dual-head working with XFree86. I can
get the single monitor working with the greatest of
ease, but I cannot find anywhere documentation on how
to make the 2nd monitor come up. Will this
on 6/10/00 9:44 AM, ryan geer wrote:
i would like to set my machine up as an ftp server. any suggestions
on which package to use or where to find guidance?
get PROftpd
http://www.proftpd.net/
it sports a config file that's similar to apache's and it can authenticate
users from a MySQL
1) You could use explore2fs to read/write to your linux partition
OR
2) Put your downloads on a partition that is accessible to Windoze (FAT16,
FAT32, etc.)
HTH,
Matt
From: "Wayne Petherick" [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [expert] ext2 under
hallo expert!
did someone of you upgrade from 6.0 to 7.1?
i plan to upgrade our server-for-everything and would like to know
what can go wrong..
PAT
--
vcard/LDAP/PGP: http://dresden-online.com/~perler/identity.html
PGP fingerprint: DAC6 2FDA 1ED7 AD55 BD1F 5142 3D5F 72BF
I have a GA-5AX w/ ALi Aladdin V AGPset, and
Linux-Mandrake and other distribs can not shut down.
Mandrake said it is a bios and kernel problem (w/
diff Mboard). It still doesnt work;latest bios + diff distr/versions
linux.
Is there any other fix for this?
Win98 hadsimilar problem (w/VA503
On Fri, 9 Jun 2000, John Aldrich wrote:
IS there a way to get Sendmail to forward mail for certain
email addresses to /dev/null?
I believe procmail would fit the bill perfectly.
-ryan
I tried telling Sendmail to
pipe mail for [EMAIL PROTECTED] to /dev/null in both virtual user
table
Add this in your /etc/aliases file:
junk: "| cat /dev/null"
Everything that goes to junk@yourdomain will go to /dev/null.
Jean-Michel Dault
[EMAIL PROTECTED]
On Fri, 9 Jun 2000, Ryan A wrote:
Date: Fri, 9 Jun 2000 17:53:57 -0600 (MDT)
From: Ryan A [EMAIL PROTECTED]
Reply-To: [EMAIL
On Fri, 9 Jun 2000, Irwan Hadi wrote:
At 12:44 PM 6/10/00 -0400, you wrote:
i would like to set my machine up as an ftp server. any suggestions on
which package to use or where to find guidance?
try proftpd (www.proftpd.net)
Or grab Mandrake RPMs from
I'm having the same problem with both KPackage and RPMDrake. When I try
to configure each to look for RPMs from a remote location (ftp or
http), neither program will do so. KPackage simply stops cold, and
RPMDrake says it's updating, but nothing happens. I have a good
connection to my ISP, and I
Take a look at http://www.windowmaker.org/
Ralph wrote:
Hi,
Can some please explain to me how to install dock apps in window maker.
I cxant figure where they go or wher to install them.
I just downloaded the new 7.1 and installed on my computer
on the second hard drive.
[deleted]
I configured a 5GB partition as the Linux partition in the first slot of the second
[deleted]
first letter of LILO "L" then a constant stream of 01 01 01 01 01 01 and it just
continues. I
how do I quickly delete a whole directory and everything it contains from
the command line.
I can do it easily from kfm and other GUI file browsers.
but
#rmdir won't work because the dir isn't empty
and
#rm -r puts me in "do you really want to do this?" hell.
thanks
Gavin
...
There is something about the kpppload file that's screwing up the rest
...
As I recall (from earlier today), kpppload was the point at which I was
instructed to switch to the 2nd cdrom--the "ext" one---during the install.
(I did a "development" install with all packages.) The packages are
how do I quickly delete a whole directory and everything it contains from
the command line.
...
#rm -r puts me in "do you really want to do this?" hell.
re-alias rm so it isn't set to that stupid/annoying/etc. rm -i!!!
Norm
IS there a way to get Sendmail to forward mail for certain
email addresses to /dev/null? I tried telling Sendmail to
pipe mail for [EMAIL PROTECTED] to /dev/null in both virtual user
table and in /etc/aliases, but when I tried to send myself
a test message, Sendmail refused.
I'd *like* to have
on 7/29/39 10:22 PM, Norman Carver at [EMAIL PROTECTED] wrote:
how do I quickly delete a whole directory and everything it contains from
the command line.
...
#rm -r puts me in "do you really want to do this?" hell.
re-alias rm so it isn't set to that stupid/annoying/etc. rm -i!!!
Hello all. I want to give anonymous ftp access on my box here. I am able to
login properly. I've change the pub dir to 777 (just to see if that would
work) but I still can't upload or make directories. Any ideas out there.
Stephen Atkins
Seagate is good for certain chipsets, but I have observed signal reflections on
i810, VIA MVP3, and MVP4, Intel 430 TX, and ALi Aladdin V under Pentium code. The
problem is highly pronounced with TX chipsets, resulting in corrupt data that
appears to write OK and is totally unreadable when
Gavin Clark wrote:
how do I quickly delete a whole directory and everything it contains from
the command line.
I can do it easily from kfm and other GUI file browsers.
but
#rmdir won't work because the dir isn't empty
and
#rm -r puts me in "do you really want to do this?" hell.
rm
Dear Norm:
Thanks a million for the clue! No wonder it happens literally at
mid-point. Is there a way around it? Perhaps installing 7.1 first
minimally, then adding the rest?
Benjamin
Norman Carver wrote:
...
There is something about the kpppload file that's screwing up the rest
...
Submitted 10-Jun-00 by Seak, Teng-Fong:
I just downloaded the new 7.1 and installed on my computer
on the second hard drive.
[deleted]
I configured a 5GB partition as the Linux partition in the first slot of the
second
[deleted]
first letter of LILO "L" then a constant stream of
On Thu, Jun 08, 2000 at 08:25 -0700, Alan Shoemaker wrote:
Denisin linuxpole.com the word pole means a long
cylindrical object, like a flag pole or a fishing pole. I
believe whoever came up with the domain linuxpole.com was
actually aiming for linuxpoll.com where the word poll means a
81 matches
Mail list logo
