Yes, /etc/lilo.conf has identical append=hdc=ide-scsi settings for both kernels.
Ross
On Mon, 10 Jun 2002 19:16:36 -400
[EMAIL PROTECTED] wrote:
In /etc/lilo.conf does the section for your newer kernel have a line like this?
append=hd?=ide-scsi
I'm sure the stock kernel section does
I tried that.. but am now getting the following types of error when I
run kde programs:
kuser: relocation error: /opt/kde3//lib/libkdefx.so.4: undefined symbol:
__ti7QPixmap
kwrite: relocation error: /opt/kde3//lib/libDCOP.so.4: undefined symbol:
newItem__14QPtrCollectionPv
ktux: relocation
I've checked out some other stuff and it seems the ide-scsi module is loading at boot
(insmod ide-scsi reports that the module already exists).
the problem is that when I try to mount the drive I get:
[ross@localhost dev]$ mount /mnt/cdrom
mount: special device /dev/scd0 does not exist
and
J. Craig Woods wrote:
Well my last post was a most intriguing explication of the quantum
theory as it correlates with spectroscopy and singularity. Even when
the renown physicist, Stephen Hawking, read it, he commented on its
value as a break-through treatise. But, alas, it did not make it
daRcmaTTeR wrote:
J. Craig Woods wrote:
Well my last post was a most intriguing explication of the quantum
theory as it correlates with spectroscopy and singularity. Even when
the renown physicist, Stephen Hawking, read it, he commented on its
value as a break-through treatise. But,
On Saturday 01 June 2002 19:58, J. Craig Woods wrote:
WRONG AGAIN! The mail server, smtp.mandrax.org is not, repeat *NOT*,
doing a reverse dns lookup on ip addresses (please see my *many* posts
on this issue).
I investigated a little bit more on this subject, and I found a post of Wietse
On Tuesday 11 June 2002 06:50 am, you wrote:
daRcmaTTeR wrote:
J. Craig Woods wrote:
Well my last post was a most intriguing explication of the quantum
theory as it correlates with spectroscopy and singularity. Even when
the renown physicist, Stephen Hawking, read it, he commented on
Azrael wrote:
I tried that.. but am now getting the following types of error when I
run kde programs:
kuser: relocation error: /opt/kde3//lib/libkdefx.so.4: undefined symbol:
__ti7QPixmap
kwrite: relocation error: /opt/kde3//lib/libDCOP.so.4: undefined symbol:
daRcmaTTeR wrote:
Azrael wrote:
I tried that.. but am now getting the following types of error when I
run kde programs:
kuser: relocation error: /opt/kde3//lib/libkdefx.so.4: undefined
symbol: __ti7QPixmap
kwrite: relocation error: /opt/kde3//lib/libDCOP.so.4: undefined
symbol:
On Tuesday 11 Jun 2002 01:32, ajax wrote:
I've installed the kde3.01 rpms and I can't get kde3 to start. I get
these errors when I try:
dcopserver: relocation error: /opt/kde3//lib/libDCOP.so.4: undefined
symbol: newItem__14QPtrCollectionPv kwin: relocation error:
Jerry Van Brimmer wrote:
On Fri, 7 Jun 2002 21:11:54 -0400
Jim Tarvid [EMAIL PROTECTED] wrote:
On Friday 07 June 2002 08:55 pm, you wrote:
Hi All,
I'm new to Mandrake, having just installed 8.2 from the 3 CD download set.
I'm trying to get Postfix to send my mail from Kmail. Having edited
I suspect it is a small utility roughly equivalent to
postmap hash:/etc/postfix/aliases
put there to ease converting humans from sendmail
Jim Tarvid
On Tuesday 11 June 2002 07:27 am, you wrote:
Jerry Van Brimmer wrote:
On Fri, 7 Jun 2002 21:11:54 -0400
Jim Tarvid [EMAIL PROTECTED]
hi,
have detected a weird problem on my box with realtec 8139. let me start :
have tried the follwing situations :
first at all I made an install like absolutly new PC.
had installed a 3Com3c905x as a eth0 and a realtec 8139too as a eth1
eth0 first got the ipadress 10.0.0.10 for a connection to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 11 June 2002 1:10 pm, Peter Ruskin wrote:
Looks like you haven't got qt3 installed.
This is a bit of a blunder by Mandrakesoft; most mirrors don't have it
(they only have kde*.rpm and libarts*.rpm).
As this question keeps coming up
On Tuesday 11 June 2002 08:55 am, you wrote:
hi,
have detected a weird problem on my box with realtec 8139. let me start :
have tried the follwing situations :
first at all I made an install like absolutly new PC.
had installed a 3Com3c905x as a eth0 and a realtec 8139too as a eth1
eth0
seems to be a good idea. hasn't any ideas of problems, I would get, as I
bought this cards. normaly with 3Com 3c905 (1ooMB) I didn't have any problems
but with mixed picles like 3Com and realtec this is my first experience.
will try it - which cheaps do you have ?
thanks
hans schneidhofer
I
On Tue, 11 Jun 2002, et wrote:
On Tuesday 11 June 2002 06:50 am, you wrote:
daRcmaTTeR wrote:
J. Craig Woods wrote:
Well my last post was a most intriguing explication of the quantum
theory as it correlates with spectroscopy and singularity. Even when
the renown physicist,
gianpaolo racca wrote:
On Saturday 01 June 2002 19:58, J. Craig Woods wrote:
WRONG AGAIN! The mail server, smtp.mandrax.org is not, repeat *NOT*,
doing a reverse dns lookup on ip addresses (please see my *many* posts
on this issue).
So what's the meaning of this message?
[EMAIL
http://news.bbc.co.uk/hi/english/sci/tech/newsid_2032000/2032156.stm
(In a funny kind of way, I hope they have problems...)
http://news.bbc.co.uk/hi/english/sci/tech/newsid_2031000/2031026.stm
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Tuesday 11 June 2002 4:23 am, Ross Pearson wrote:
I've checked out some other stuff and it seems the ide-scsi module is
loading at boot (insmod ide-scsi reports that the module already exists).
the problem is that when I try to mount the drive I get:
[ross@localhost dev]$ mount
Realtek 8139s from a variety of sources but they all seem to work.
Lately I've been buying Netgear FA310/311 in OEM quantities at ~$8.50 but
they run closer $20 at retail.
Jim Tarvid
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
I believe your solution will also remove a valid lockfile, ain't it?
daRcmaTTeR wrote:
On Mon, 10 Jun 2002, Richard Bonebrake wrote:
I am using Mandrake 8.2 as a server. I have postfix doing the mail
and have
gnu_pop3d running as the pop3 server. If a user drops connection for
some
Pierre Fortin wrote:
On Tue, 11 Jun 2002 08:40:48 -0500 J. Craig Woods
[EMAIL PROTECTED] wrote:
If you want to send mail to smtp.mandrax.org, you must first make sure
you register your domain name, and you must then have that name in the
address space of a dns server running on the
Hi to the list,
I use this package because to get pictures on flash card on USB ( FAT12
format.is used)
when I check partition by
#fsck /dev/sda1
I get
fsck.vfat not found
so dosfsck inclued do that correctly (fat/vfat)
A LINK IS MISSED in package to do a symbolic link from fsck.vfat - dosfsck
Thanks,
I had qt3 installed but I guess there was something wrong with the rpm. Your link
didn't work but I found a texstar rpm. I had to force it to install but kde3 works
now. I think that the rpms I installed before were from cooker.
On Tue, 11 Jun 2002 13:51:40 +0100
Alastair Scott
i have a mandrake 8.2 box which i wish to use to login remotely onto a
prosuite8.2(download edition),
the prosuite box is running kdm and has security level 'higher'
i have edited /usr/share/config/kdm/kdmrc so that at th ened it reads
[xdmcp[
Enable=true
..
i have edited
On Tuesday 11 June 2002 09:40 am, daRcmaTTeR wrote:
damn shame it got lost in the EtHeR (MandrakeSympa) servers with the
other mystery post not showing up.
That is why they call it ethernet ain't it?
I always thought they called it the ether cause they couldn't think of
anything
i have lost all the fonts i like to use, all the 'helvetica' fonts don't show
up in the kde config dialogues, the above packags are the only things i
recall changing in the last few days on this box, i had a crash and upon
reboot everything is foobarred font wise - is there someway to 'reset'
well sorry fro this but i couldent find any other
place to ask this question i need the salution very
badly this will gratly benift me
well i have 2 ethernet networks running which i want
to connect but the distance between them is above 400
meters .. so this is way beyond the normal lan
ajax wrote:
Thanks,
I had qt3 installed but I guess there was something wrong with the rpm. Your link
didn't work but I found a texstar rpm. I had to force it to install but kde3 works
now. I think that the rpms I installed before were from cooker.
On Tue, 11 Jun 2002 13:51:40 +0100
On Thu, 2002-06-06 at 10:23, daRcmaTTeR wrote:
On Wed, 5 Jun 2002, civileme wrote:
[small snip]
And the old adage is still true: Data not backed up is data lost
Civileme
Civileme,
I wish I would have heeded your warning some time back when you warned
against using ext3. while
Although I can't answer with specifics I can point you to a starting
point on the wireless stuff. A real good site for starting is here.
http://www.netscum.com/~clapp/wireless.html
It goes into the theory needed.
If you are looking to do this on the cheap (and I do mean cheap) check
out this
Am Dienstag, 11. Juni 2002 16:31 schrieben Sie:
Realtek 8139s from a variety of sources but they all seem to work.
perhaps I got the problem depending on my hardware ? maybe, I should take two
cards of the same type from realteks ?
anyway, thanks a lot for helping hints
bye
hans schneidhofer
On Tue, 2002-06-11 at 04:27, daRcmaTTeR wrote:
Jerry Van Brimmer wrote:
On Fri, 7 Jun 2002 21:11:54 -0400
Jim Tarvid [EMAIL PROTECTED] wrote:
On Friday 07 June 2002 08:55 pm, you wrote:
Hi All,
I'm new to Mandrake, having just installed 8.2 from the 3 CD download set.
I'm
faisal gillani said:
well sorry fro this but i couldent find any other
place to ask this
question i need the salution very
badly this will gratly benift me
well i have 2
ethernet networks running which i want
to connect but the distance between them is above
400
meters .. so this is way
Hi,
I use KDE 3.0.1 (the newest version by Texstar). I start it from the cli
with kde3. When I log off from KDE I get back to the cli and see a lot of
warnings and error messages from KDE.
At LinuxTag in Karlsruhe, Germany I asked the KDE guys about it and one
of them stated that most of it are
On Tuesday 11 June 2002 06:50, Azrael wrote:
Well, where are these exemplary documents? I would also like to read them.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Saturday 08 June 2002 09:23 am, Jerry wrote:
Is the USB port mounted as a filesystem/storage device on
automount? I have the same kind of problem with my ATAPI IDE cdrw
drive... it's automounted at startup and does not respond (device
is busy) but if i su and umount it then insert media
On 11 Jun 2002, Lyvim Xaphir wrote:
Civileme,
I wish I would have heeded your warning some time back when you warned
against using ext3. while it was just a workstation and all the data
files are on the server and backed up constantly, ext3 puked the other
night and forced a
On Tue, Jun 11, 2002 at 15:21 -0700, Larry Sword wrote:
I beleive it's kdebugdialog.
Larry
Wolfgang Bornath wrote:
Hi,
I use KDE 3.0.1 (the newest version by Texstar). I start it from the cli
with kde3. When I log off from KDE I get back to the cli and see a lot of
warnings and error
Hi,
I run xine to view a dvd. Xine shows the pictures fine without any
problems but I don't have any sound.
Otherwise sound works (CD, signal-wavs in KDE, etc). The audio tab in the
config screen of xine shows audio driver to use: 'null'.
I use xine 0.9.8
wobo
--
Registered Linux User 228909
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
test
- --
JLK
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE9Bn4Wq1Ef6ZbWHeERAr0MAJ9/OSdSF4Dp49i+Q2def5NPNN9qugCgjll9
2qIC4qoRDQGVKxasjdATSgw=
=HMZf
-END PGP SIGNATURE-
test message
--
//GO.SYSIN DD *, DOODAH, DOODAH
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Wed, 2002-06-12 at 04:14, faisal gillani wrote:
well sorry fro this but i couldent find any other
place to ask this question i need the salution very
badly this will gratly benift me
well i have 2 ethernet networks running which i want
to connect but the distance between them is above
The table on http://www.mandrakesecure.net/en/docs/msec.php shows that
Security Level 4 and higher causes ICMP Echo (ping) packets to get
dropped.
How is this accomplished? Is it in the kernel itself? I thought it might
have been a pre-defined IPtables rule executed by an msec script, but my
On Tue, 11 Jun 2002 21:15:51 +0200
hans schneidhofer [EMAIL PROTECTED] wrote:
Am Dienstag, 11. Juni 2002 16:31 schrieben Sie:
Realtek 8139s from a variety of sources but they all seem to work.
perhaps I got the problem depending on my hardware ? maybe, I should
take two cards of the same
All,
Now that I have a boxen that is kde3 only (as apposed to kde2) I've
been trying to re-build some apps that are kde3 compatible but not yet
built into rpms. My Q is How do you pass a prefix using rpm --rebuild?
Check of the man pages etc. Make it seem that this can be passed only
for a
Hello,
I have a client that is using a Windows program to access a database file on a Samba
share. The program is using Windows built-in ODBC drivers.
Question: how can I make database queries to this file? The only info I've got so far
is that it is a Fox pro database. It's not being
I'm having a terrible time printing from my Mandrake 8.2 system to an
OfficeJet K60 spooled on Win2K.
I use SMB to print. Sometimes it works, sometimes it just doesn't; the
pattern has been completely random. When it doesn't work, the document
will appear briefly in my Win2K queue but
On Tuesday 11 June 2002 10:34 pm, [EMAIL PROTECTED] wrote:
Hello,
I have a client that is using a Windows program to access a database file
on a Samba share. The program is using Windows built-in ODBC drivers.
Question: how can I make database queries to this file? The only info I've
got
On Tue, 2002-06-11 at 21:12, J. Craig Woods wrote:
Jesus Arocho wrote:
On Tuesday 11 June 2002 06:50, Azrael wrote:
Well, where are these exemplary documents? I would also like to read them.
Want to buy
I recently updated my kde to the 3.0.1 rpms. Since then, I can no longer
encrypt emails using kmail and gpg. Before, I could at least select the
encryption button even though it returned a malformed header error. Now,
the encrypt options are totally greyed out. Is anyone else having this
52 matches
Mail list logo
