I have had with it is that it doesn't like it when I key
the transmitter into it.. ... I no longer have it connected to a
transmit coax..
YMMV
AL, K0VM
On 5/12/2011 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Wed, 11 May 2011 21:09:10 + (UTC)
From:vtnn...@comcas
Yes, better than DPCLAT but LATENCYMON does not support Win XP. only
more recent versions for Windows :-(
AL, K0VM
On 6/24/2011 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Fri, 24 Jun 2011 09:28:34 -0400
From: "Tim Ellison"
To: "'Jim Jackson
X DSP buffer size..
In my case, if I revert to PSDR to 1.18.6, the problem disappears..
I have not had a like problem on my Flex5K PSDR 2.x.x
AL, K0VM
On 7/12/2011 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Tue, 12 Jul 2011 07:32:11 -0400
From: Michael Walker
To:flexradio@flex-radio
Rick,
Have a look at the flexwiki page ...
http://flexradiowiki.com/frsradoiowiki/index.php?title=EasyPal
Al, K0VM
On 8/25/2011 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Wed, 24 Aug 2011 23:31:47 -0400
From: Richard Lawn
To:flexradio@flex-radio.biz
Subject: [Flexradio
se or
RX or TX function.
AL, K0VM
On 9/5/2011 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Sun, 04 Sep 2011 23:46:48 -0400
From: Jerry Flanders
To: James Sheehan,FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] help
Message-ID:
Content-Type: text/plain; charset="us-
the Flex USB to
parallel cable, the Driver could be missing or not installed correctly,
or the Flex USB to Parallel cable could be defective. An non-Flex USB
to Parallel converter is not likely to work ever.
AL, K0VM
On 9/5/2011 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Sun
Depending on where the shack ground is, it may be MORE important do
have a short ground ( no longer than the length of the firewire cable)
between the computer chassis and the Flex chassis... ( and NO chokes
that ground ! )
Al, K0VM
On 9/12/2011 12:00 PM, flexradio-requ...@flex-radio.biz
? ( PSDR 2.2.2, VAC 4.10(p) &
WSPR 2.11 )
AL, K0VM
On 9/13/2011 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Mon, 12 Sep 2011 22:46:45 -0700
From: Brian Lloyd
To: Steven Hess
Cc:FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] WSPR Setup on PowerSDR and FLEX-1500
Messag
testing email
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Ho
sorting out the changing VAC
enumerations. MMTTY and most other amateur radio programs do not.
I check VAC selections each time I start a modem program.
Al, K0VM
On 10/12/2011 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Tue, 11 Oct 2011 22:49:51 -0400
From: Neal Campbell
To
power line arrester. But it is of little use when the noise
looks more like white noise or is not much stronger than the signals
you're trying to receive.
One would wish that with the push of a button all noise could be gone,
the the laws of physics and implementation reality get in the
bus bar.
So it depends a bit on what your trying to achieve. There is no 'right
way' for every situation but many ways that will work.
AL, K0VM
On 11/18/2011 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Fri, 18 Nov 2011 16:01:12 +
From: Jim Jannuzzo
To:
Subject:
I would add that Brian is correct except for SSTV/DSSTV convention which
follows SSB convention/
LSB/DIGL on 160/80/40. USB/DIGU elsewhere.
AL, K0VM
On 12/28/2011 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Wed, 28 Dec 2011 09:42:04 -0800
From: Brian Lloyd
To: dave dabay
Paul,
To run the 1500 and the 5k at the same time you need to select the
1500 in the chooser form first.
once you have the 1500 running, start and choose the 5k.
Works for me..
AL, K0VM
On 1/9/2012 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Sun, 08 Jan 2012 19:49:23
I might be interesting to repeat the Tune power test with the Drive set
to 50 instead of 100..
( Different PA linearity curves on different bands ??? )
AL, K0VM
On 1/9/2012 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Mon, 9 Jan 2012 07:23:12 -0800 (PST)
From: Ed Wilson
To
initiate/Tune complete but it does not support PowerSDR(Flex) since
PowerSDR has no means of using those signals..
I just give the 998 a bit of RF (10 watts) when I need it to tune..
AL, K0VM
On 1/10/2012 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Tue, 10 Jan 2012 17:15:48 +0100 (CET
rt ( or any port ?? )
AL, K0VM
On 3/14/2012 4:17 PM, Michael Walker wrote:
> I guess I am going to have to go look at the source code for rigctl,
> but does the error message:
>
> IO Error
>
> Tell me that it can't send data to the port, or that it can't open the
seems to recover . I need to make more observations.
AL, K0VM
On 3/18/2012 2:30 PM, Jim Barber wrote:
FWIW, K7RLD has discussed the same issue with me.
He has a 1500 as well - I haven't been able to duplicate it on the 5000.
73,
Jim N7CXI
On 3/18/2012 11:02 AM, Mathias Krüger wrote:
Hi Al,
is present even with the HUB
but is less frequent with the HUB than without it.
This suggested to me that there may a subtle USB timing issue that
is hardware ( including the FLex ) and OS related.
Most 1500's do not appear to have the problem, my does.
AL, K0VM
On 3/20/2012 9
the white noise witll go away and the audio is normal. The Panadpater is
normal and the VAC outputs are normal.
AL, K0VM
On 3/22/2012 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Wed, 21 Mar 2012 13:42:35 -0400
From: Jim Eastham
To:"flexradio@flex-radio.biz"
Subject: [Fle
chasing DX, I click on a phone spot and get my SSB profile...
click on a RTTY and get my RTTY profile..
To bad PSDR does not yet have RX Profiles.. It would simplify how
much stuff I have in my DDUtil macros.
AL, K0VM
On 4/14/2012 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date
d ( or any valid
PSDR CAT Command ). Se*e
http://support.flex-radio.com/Downloads.aspx?id=3*
AL, K0VM
On 4/22/2012 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Sun, 22 Apr 2012 11:44:40 -0500
From: Gary Robertson
To:flexradio@flex-radio.biz
Subject: [Flexradio] Using Keyboard&
AL, K0VM
On 5/14/2012 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Mon, 14 May 2012 17:05:05 +0200
From: Rob Keijzer
To: "Ray, K9DUR"
Cc: Flexradio reflector
Subject: Re: [Flexradio] Customising Band text
Message-ID:
Content-Type: text/plain; charset=ISO-8859-1
Than
"parallel" adapters support just a part of the full, original set of
signals, only enough to drive a parallel port printer. The SDR-1000
likes a full set of signals.
Just something else to look at.
The flexwiki had a list of know good adapter, but the wiki is down right
now.
AL,
may
use the Primary connections ) In N1MM, the other end of the virtual
serial port pair is configured in Config>Config Ports,...>Hardware
Third -- The CW keying ( and PTT ) is not routed through DDUtil...
DDUtil only supports CAT information.
Hope this helps.
AL, K0VM
On
in the dark..
Al, K0VM
On 7/21/2013 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Sat, 20 Jul 2013 17:58:46 -0400
From: Richard Lawn
To:"flexradio@flex-radio.biz"
Subject: [Flexradio] CW Key & FlexControl Intermittent
Message-ID:
Content-Type: text/plain; char
Mark,
The 6K radios have different hardware technology inside the radio
that allows that to happen.. The FLEX PSDR radios just can never do it..
AL, K0VM
On 8/24/2013 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Sat, 24 Aug 2013 08:51:31 -0700
From: Steve Sterling
To:flexradio
think the document will answer most of your questions.
AL, K0VM
On 9/28/2013 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Fri, 27 Sep 2013 13:11:48 -0700 (PDT)
From: javascript:__doPostBack('GridView1','Download$9')
To:"flexradio@flex-radio.biz"
Subjec
Dave,
I use the KPA500 & KAT500 with the Flex5000 and its a great working
combination when I add the DDUtil_V3 interface software..
AL, K0VM
On 9/28/2013 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Fri, 27 Sep 2013 11:26:24 -0600
From: David Getzy
To:
Subject: [Flexr
John,
the original drive was 5.10.0.5051 ... version 5.10.0.5057 can be down
loaded from the from the M-Aduio website ( for WinXP SP3 ) If your not running
XP, then other versions of the M-0Audio driver have been made to work..
AL, K0VM
Date: Wed, 28 May 2014 09:51:35 -0700 (PDT)
From
may shuffle the port selection numbers depending on the
order that you apply power to F5K/F3K vs. other sound card devices. if
you start WSjt before you fire up the F5K/F3K the number for you VAC
ports may be different than is you start F5K/F3K after WSJT.
AL, K0VM
Date: Thu, 11 Jun 2009 16
Line in.
If the software where changed to pick the VOX signal off after the MIC
gain slider then I think VOX adjustment would more usable.
AL, K0VM
Date: Mon, 15 Jun 2009 00:54:22 -0400
From: "NJ1H"
Subject: [Flexradio] Flex-5000A Line in VOX operation?
To: "'FlexRadi
ant to run this DEMO in the heat of a contest, but
it does give a different feel to the radio.
With proper software tweeks, it could be a useful operational option
provided the hardware limitations are not objectionable (see caveat
translations user programmable.
For my casual operations, I rarely touch the ShuttlePro but find it
more useful in a contest situation.
AL, K0VM
> Date: Wed, 5 Jan 2011 11:57:28 -0500
> From: "Bradley Feldman"
> To:
> Subject: [Flexradio] New Software for ShuttlePr
..
The SDR-1000 has no firmware...
AL, K0VM
Date: Thu, 3 Mar 2011 11:29:35 -0500
From: Edwin Marzan
To:,
Subject: [Flexradio] Does the new change in TR transition times affect
the SDR-1000?
Message-ID:
Content-Type: text/plain; charset="iso-8859-1"
Greetings All,
Jeff, et al
Looking at your third snap shot, I see what looks like an attempt to
create an SSB signal from a clipped sinewave ( or squarewave ) as
described by E.W. Papenfus in Single Side Band Priciples and Circuits..
What is needed is envelope limiting and not audio clipping ..
AL
original suppositions that It was a relay hanging, appear to be
incorrect. )
Al, K0VM
Date: Thu, 03 Mar 2011 13:16:59 -0600 From: Al K0VM
To: edwin_mar...@hotmail.com,
"flexradio@flex-radio.biz" Subject: Re:
[Flexradio] Does the new change in TR transition times affect, the
your antenna during receive.. On the lower bands the signals
are within regulator limits without the preamp.. The isolation provided
by the preamp keeps the conducted radiation with in limits on the higher
bands.
AL, K0VM
Date: Sat, 12 Mar 2011 19:48:10 -0500
From: "jreed"
T
red line was near in the
center.I'd rather have the display width..
AL, K0VM
On 3/16/2011 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Tue, 15 Mar 2011 17:12:55 -0400
From: Ted Trostle
To: "William H. Fite"
Cc: FlexRadio Reflector
Subject: Re: [Flexradio]
to Scope..
They're about 200millisec in length.
Let me know if it helps...
YMMV
The SDR-1000 and F-1500 don't seem to have the VAC drop-out problem
that I am seeing on the F5K...
Al, K0VM
On 3/23/2011 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Wed, 23 Mar 201
output
voltage of sound cards.. would be better to do that than put in 3.16...
) and don't forget that you have to put in the 3.16 anytime you
rebuild the database and recalibrate . )
Other than that, It has worked fine for me..
AL, K0VM
Date: Fri, 26 Dec 2008 09:21:08 -0500
From
Dave,
You may find a program called "Portmon" useful for monitoring com port
activity while your debugging your program.
its available form several sites...
http://download.cnet.com/Portmon/3000-2651_4-50147.html
Al, K0VM
Date: Tue, 07 Apr 2009 17:39:11 +
From: W5U
Paul,
I think it is bad news... The only one that I know of that worked
was the custom one that Flex sold and I believe they are sold out..
Can some one please confirm this for Paul..
AL, K0VM
On 6/28/2014 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Sat, 28 Jun 2014 09:42
Charles,
yes you would need a speaker amp.. The Flex radios do not include a
built in speaker amp.
Al, K0VM
On 4/16/2015 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Thu, 16 Apr 2015 00:07:16 -0400
From: Charles Reiche
To: FlexRadio Reflector
Subject: Re: [Flexradio] Monitor
AND you must also have a paid version of VAC .. The unpaid version
inserts gaps in the data stream.
AL, K0VM
On 11/19/2015 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Wed, 18 Nov 2015 19:42:59 -0500
From: John Ferrell
To:t...@flexradio.com,FlexRadio@flex-radio.biz
Subject: Re
Start here...
https://helpdesk.flexradio.com/hc/en-us/requests/new
AL, K0VM
On 9/28/2016 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Wed, 28 Sep 2016 14:00:54 +
From: John Walker
To: 'Flex'
Subject: [Flexradio] Flex 5000A - How to open the case.
46 matches
Mail list logo
