What property of the Space Navigator enables it to retain its focus on PSDR???
Could this property be transferred to PSDR enabling other commercially
available and home-brewed input devices to work in the same way.
Keep it simple guystechnically challenged here!!
TIA
David - G4PNX
Hi:
I just tried the new Power SDR 1.18.0 with my 1k/FA66 setup. The receive
preamp in the equalizer doesn't work. Any thoughts? Thanks,
David WA3HVR.
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Beha
My audio problems went away when I got a newer and faster computer.
Up till then I had been having intermittant problems..sometimes good but
mostly "a little off"
Just my 2 cents worth,
Rgds,
Dave
On Tue, Apr 7, 2009 at 11:10 AM, Andy Diethard Hansen wrote:
> Hi Jim,
>
> Yes, perhaps a complex EM
I am using the same as Tim with a Asus PQ5 motherboard. (TYpe and model of
mother board is important.)
I stripped XP down to the basics As per the knowledge base and dissabled all
networking devices.
Impossible to update now! XP with SP3.
Via firewire card supplied by Flex.
Latency very low : Does
.
73
David, G4YTL
>>> 10/03/2009 20:11 >>>
Hello, I'm using a Flex5000A with PowerSDR 1.16.2 an the newest drivers. There
is a problem (even in earlier powerSDR versions) when using the keybord to
create cw-signals. When I type the letters in the lines they will no
Had similar problem with CWX keyboard and my Flex5K. Finally gave up and
went to CWTYPE (free) software with com0com. Works great!
Dave WN5V
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Ray Andrews
Sent: Tuesday, March
Tim - still unable to key PTT via COM port from HRD and MixW
using SVN 2697 -- Driver issue maybe ?
Thanks
Dave
Tim Ellison wrote:
SVN 2696 - Eric just fixed the crash you were experiencing. How is that for
service!
-Tim
From: Tim Lemmon [mailto:tlem...@gmail.com]
Sent: Thursday, Februar
I don't see that fatal error, however, I have not been able to key the
transmitter with a COM port with HRD with 2694 or 2695 .. 1.16.1 works fine.
Dave W0DHB
Tim Lemmon wrote:
Hello.
Just ran the SVN update to revision 2695 (version 17). Now when I run Power
SDR, I get a fatal error tel
Has any one experienced an increased in output power for no apparent reason
with their Flex 5000A. I've got a new one (2 weeks old) that after about 2
hours of operation - not necessarily transmitting - just leaving the Flex
on, the output power goes up. For instance, in the TUN mode, with tuning
Running 1.17.0 svn ver. 2635 and the TX meter goes to full scale when in
alc,mic,cpdr,eq. lev etc when operating-goes to 200 db when radio is keyed, is
anyone else seein the same thing?
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
ht
Thanks to all who diagnosed a database error causing the problem. Now fixed and
as always grateful to all who helped.
David
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
owingly changed anything. Previous versions of SDR launch OK. I've
reloaded 1.12.0 but with the same result.
Thanks
David, G4YTL
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_fle
Zack
If PSDR cat is com31, your RADIO Cat should be 30, not the RCP1.. (Field is
to the left of RCP1)
RCP1 is the com port which pairs up with the main Radio Control Program that
you use ..
Start up PowerSDR and then DDUtil.. The Top banner of DDUtil should say
"Connected"
Dave
W0DHB
-Or
Hi ,
I am experiencing a problem with SDR 1.16.1 and the new firmware off the
website(Not SVM)
At even the lowest setting of the mic gain and with no boost or equalizing I
am seeing output on the scope in the panadapter mode. Stations also report
the signal has noise when I don't speak. Turning thi
I hate to ask such a naive question, but as an ancient SDR1K user can I use
SDR1.16.1 without any other software downloads, and if so what
changes/improvements will I notice?
Thanks
David, G4YTL
___
FlexRadio Systems Mailing List
FlexRadio@flex
If we do not have RX2 installed is there any immediate need to update the
firmware and SDR to 1.16.1. Currently using 1.14.0 and everything is running
well.
Means I will have to reset all my Mic settings again!
73,
Dave YB0AJZ
On Wed, Dec 3, 2008 at 6:46 AM, Neal Campbell <[EMAIL PROTECTED]> wrote
ginal Message-
From: Brian Lloyd [mailto:[EMAIL PROTECTED]
Sent: Tuesday, December 02, 2008 11:26 AM
To: David Beumer W0DHB
Subject: Re: [Flexradio] 40m qrm with harmonics
On Dec 2, 2008, at 8:40 AM, David Beumer W0DHB wrote:
> I think the brute force approach is what I'm going to
Just installed
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dudley Hurry
Sent: Tuesday, December 02, 2008 11:07 AM
To: Jim Cox
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] SDR 1.16
Jim,
That error will be fixed this evening with the 1.16.1 r
Brian Lloyd [mailto:[EMAIL PROTECTED]
Sent: Monday, December 01, 2008 5:40 PM
To: David Beumer WA3FDB
Subject: Re: [Flexradio] 40m qrm with harmonics
On Dec 1, 2008, at 3:56 PM, David Beumer WA3FDB wrote:
> Brian C & Brian L
>
> I did get an email from the ionosnode folks in Bo
wo2x
--
From: "David Gardner" <[EMAIL PROTECTED]>
Sent: Monday, December 01, 2008 9:27 PM
To:
Subject: [Flexradio] v 1.16.0
> Is anyone been able to run the latest PowerSDR with firmware version
> 1.3.0.0?
> Dave
> __
Is anyone been able to run the latest PowerSDR with firmware version 1.3.0.0?
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexr
be either
an internet cable modem or a switching power supply. David, how close are
you to Boulder? There is a new digital ionosonde station in Boulder, with a
4Kw amplifier, undergoing testing as of November 22, 2008. It's a VIPIR,
Vertical Incidence Pulsed Ionospheric Radar installatio
m qrm with harmonics
An ethernet switch could be the culprit. My next guesses would be be either
an internet cable modem or a switching power supply. David, how close are
you to Boulder? There is a new digital ionosonde station in Boulder, with a
4Kw amplifier, undergoing testing as of November 22,
Actually it's multiples of 80Hz or so.. The harmonics are a multiple of 170.
That being said, I do have a Netgear managed switch that I will check out.
Thanks
-Original Message-
From: Brian Lloyd [mailto:[EMAIL PROTECTED]
Sent: Saturday, November 29, 2008 5:14 PM
To: David B
Shoot -- ran 5000 from battery operated notebook, it's not the PC's or
monitors.
A correction on the repeating pattern, it's every 80Hz or so, the 170Khz
repeating was the 2nd Harmonic.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dav
I'm gonna check that out Jim, I use an Astron RS-35M for the Rig, might be
one of the PC's
Thanks
Dave
-Original Message-
From: Lux, James P [mailto:[EMAIL PROTECTED]
Sent: Saturday, November 29, 2008 12:54 PM
To: David Beumer W0DHB
Subject: RE: [Flexradio] 40m qrm with
/IONO/ionogram.html> Message: 4> Date: Fri, 28
Nov 2008 > From: "David Beumer W0DHB" > Folks> I'm trying to track down the
source of some nasty QRM that appears as an> 4khz wide carrier that meanders
through 40m with 2nd ,3rd and 4th harmonics> on 20, 15 and 10. I
Ahti
Thank you, I hadn't thought of the UPS..
-Original Message-
From: Ahti Aintila [mailto:[EMAIL PROTECTED]
Sent: Friday, November 28, 2008 10:46 PM
To: David Beumer W0DHB
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] 40m QRM
David,
If you are using any UPS equipment o
Folks
I'm trying to track down the source of some nasty QRM that appears as an
4khz wide carrier that meanders through 40m with 2nd ,3rd and 4th harmonics
on 20, 15 and 10. I've got a screen shot of waterfalls of 40m (Top) and
20m(bottom) showing the signal at URL: www.wa3fdb.net/40mQRM.htm
Offering these on here before listing on eBay.
Please note that I live in the UK, so the prices are in British Pounds
with the US Dollar value, at todays exchange rate, in brackets but the
cost of posting to the USA or other countries outside of Europe would be
quite high...
For sale:
SDR-1
In Wave/Options the receive should be set to post processed and
transmit to pre processed. Also set the rate to 48000. Then the
quicksdr.wav should play with media player or other audio player
capable of playing wav files.
Note - the settings are opposite of the default settings.
Dave
wo2x
On Mo
There was a bug fix (1903)that corrected this problem. It was fixed on
10/2/2008
The problem fixed only occurred when using a 192k sample rate.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Val Walker
Sent: Wednesday, October 29, 2008 8:15 PM
To: Flex R
Folks
I'm waiting for a replacement 34B RFIO board - in order to join the QSO
party, I put my 27 C board back in (Dudley had indicated it should work)
It's not working - I did notice that in the setup menu, general tab
PowerSDR still thinks I've got a 27 C .
Has anyone got any helpful
Just got a Flex 5000A to replace my SDR1000. I'm ready!
Dave
wo2x
On Fri, Sep 26, 2008 at 10:15 AM, Tim Ellison (W4TME)
<[EMAIL PROTECTED]> wrote:
> ...until the start of the FlexRadio QSO party.
> For more information, see the FlexRadio QSO party web page
> http://www.flex-radio.com/Users.aspx?
Yes here -- after the upgrade everything worked for a couple of days .. now
no receive with 1.2.1.10 or 1.2.2.0 firmware.
Should we run eeprom update utility again ?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Eric Wachsmann
Sent: Monday, September 2
rt
I should note that I did re-install 1.2.1.0, however, that did not make a
difference so I brought it back up to 1.2.2.0
Don - kx9q
- Original Message
From: Dale Boresz <[EMAIL PROTECTED]>
To: Don Sachnoff <[EMAIL PROTECTED]>
Cc: David Beumer WA3FDB <[EMAIL PROTECT
I am seeing symptoms similar to Don's..
I have the RX2 and new RFIO board and Firmware 1.2.2.0. Using PSDR 1.14.0
the radio was working for a day or so, now both receivers noise level is
-135 .. I believe I still have transmit capability.
Repeated attempts at re-installing firmware, power cycling,
Folks
For what it is worth, I posted a PDF of an openoffice compare at
http://wa3fdb.net/Flex/Flex-5000_Owners_Manual_v%201_12_vs_v1_14.pdf
It's pretty big (about 5MB) but might be useful .. I'll try and figure out
change bars.
Dave
WA3FDB
-Original Message-
From: [EMAIL PROTECTED]
[m
Ditto
Dave Beumer, WA3FDB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brian Lloyd
Sent: Saturday, September 06, 2008 9:59 PM
To: FlexRadioReflector
Subject: Re: [Flexradio] 2 meter/70cm Transverter-scrubbed?
On Sep 6, 2008, at 8:42 PM, Jim Jerzycke
I have seen this also and reported it -- Bug ID #1903
Dave Beumer - WA3FDB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Don Sachnoff
Sent: Wednesday, September 03, 2008 9:00 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Issue with V1.14.0
If
I returned home this eve from work, fired up the radio and it is working
correctly. I had previously rebooted the radio with no effect. Go figure.
Thanks for all the help.
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.f
I am using XP Home Edition. I have a dual boot setup and am going to try it
out on Vista. Will let you know result.
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
A
Thanks for the responses. I have reset the database and rebooted computer
several times.
Dave-W4DWG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.
I just installed new console,firmware and firewire driver. Main receiver works
as normal. 2nd Receiver comes up on the screen but no signals present. I have
in the ant menu the rx1 tap checked. Firmware 1.2.1.10. Before installation
of new software and firmware all worked as normal.
What
Norton, you can find better, but you won't pay more !
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of k5nwa
Sent: Thursday, August 28, 2008 2:42 PM
To: Jim Jerzycke
Cc: Flex Reflector
Subject: Re: [Flexradio] Virus Checkers
At 02:24 PM 8/28/2008, Jim Jer
FYI - My computer had Norton 2008 on it when I upgraded and I didn't have
this issue.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Maarten
Sent: Wednesday, August 27, 2008 10:08 PM
To: 'Ted'; flexradio@flex-radio.biz
Subject: Re: [Flexradio] WinXP Pro S
Ted
I've been using XP Pro SP3 on my dedicated Flex computer with no problems ..
I upgraded to SP3 within days after it became available.
I using latest version of PowerSDR with a Flex 5000A. I'm using VAC and VCOM
along with HRD, DM780 & CWSkimmer.
Dave, WA3FDB
-Original Message-
From:
Tim, thanks for the report on the status of the new firewire driver.
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40f
In reference to the KB article on Ver 3.2.0, where can one obtain the mentioned
Firewire Hardware Device Driver? The version on the Flex Radio web page is
version 3.0.0.70.
Dave-W4DWG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http:/
Tim - I only have the problem when I change to 6 meters on antenna connections
1 & 2. If I am on 80 meters and switch to 6 meters and then back to 80 I show
a high SWR. If I am on 80 meters and switch to any other band with the
exception of 6 meters it shows a 1 to 1 swr in tune. When I start
Tim - I deleted the database and restarted radio, still have the same problem.
I also ran the firmware upgrade for the series 34 rfio over again with no
change. Should I be hearing a click from the relays when I change the TX
antenna port?
Dave
___
F
Tim - I believe I did that when I first noticed it, but I will try that again.
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flex
Neal, I only hear relay clicks on changing the receive antenna selection but
not when the transmit antenna is changed.
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
A
I am having trouble with the radio transmitting into the selected antenna
connection. The radio is set it to coax 1 and to 80 meters. When I switch
bands and then go back to 80 meters and transmit I am seeing a high SWR, then
switch between ant 1,2,3 and set then set back to ant 1 it has a
I did a quick check of eterlogic on HRD and MixW
On MixW it did not recognize the port
HRD hung up trying to connect.
I'm using WinXP SP3 on Q6600.
Dave
WA3FDB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tim Ellison
Sent: Friday, July 11, 2008 7:05 A
To Jeff - Did you check the bias on the finals? CTRL SHIFT F, then CTRL ALT B
-two windows in lower right corner should read 1.000 top window, 2.000 bottom
window.
Dave-W4DWG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
I also tried to get the Eterlogic virtual com port to work with HRD and MixW
- it hung trying to connect with HRD and a gave a connection error with
MixW.
I'm using XP Pro SP3
Dave - WA3FDB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Art Gartner
Sent
would favour the approach used by DB6NT in their latest transverters
- the ability to lock to an external source (eg 10MHz) - as an aside, can the
5000A, like the SDR-1000, be fed by an external frequency source?
73
David, G4YTL
>>> "John" <[EMAIL PROTECTED]> 01
Running 1.12.0 console, 1.2.0.1 firmware, 2nd receiver installed and notice
that when I mute rx1 it mutes both receivers. Tried with both xp and vista
with same results. Would be good to be able to mute each individually. Anyone
else seeing the same thing happen?
Dave-W4DWG
__
oblem. It means that
I am condemned to not being able to update and gain the benefits of later
versions.
73
David, G4YTL
PS I have also installed the latest version of VAC which works fine but hasn't
helped the above problem
___
FlexRad
Tim Ellison wrote:
> Actually, the clip has a function, but it is top secret high tech innovation.
>
Yet another hardware development outside of the 'Software' only ideal...
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-r
How in 1.12.10 do you activate the scrolling of VFO B when in MultiReceive? I
right click screen twice and get the red cross hairs, but it will not scroll
VFO B. There was a check box in previous versions on the general tab of setup
under options to activate the feature.
Dave-W4DWG
Dave
You can use this branch:
\branches\ke5dto\rx2\bin\Release\PowerSDR.exe
Dave
WA3FDB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dave Blaschke
Sent: Monday, June 09, 2008 1:48 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] RX2 PowerSDR
I ju
Jim
That is true -- the CATV meter (an SDA 5000) does measure levels in dBmV and at
75 ohms.. I'll poke around and see what I can find out.
Thanks for the heads-up.
Dave
WA3FDB
-Original Message-
From: Jim R [mailto:[EMAIL PROTECTED]
Sent: Friday, May 23, 2008 6:52 PM
To:
Phil
I have a similar problem -- I have heard nothing on 6 meters. I do see a lot
of spurs.
As a quick test I checked to see if I got local TV channel 2 Video 55.25 Mhz
and audio 59.75 -- I received both, but the signal is not as strong as I
expected. I'm going to see what the signal strength is
Tks for coming back.The same readings occur even going into the dummy load. The
run is out of the sdr5000 into the linear out of lin. into the swr meter into
the atu and up to antenna, hope this clears it up. David GI0WCE
- Original Message -
From: Edwin Marzan
To: david
Re sending message with all the information... The rig is a new sdr 5000a.
When I tune my own SDR meter the SWR is about 1.8, but when I look at the sdr
reading on the computor it is showing 40.1. I am using the power sdr 1.10.4
and all the Flex software.. Hope this a bit more help. David
I have noticed that when I try to usr thr tune function or transmit I see on my
outside swr meter shows about 1.8 to one, but on the computor screen it shows a
40.to one., any ideas? I am sure it is my fault doing something wrong but I
cannot figure it out. Any suggestions welcome. David
Once again, I do appreciate your clarifications and explanations. I am sure
others can benefit from them, as I may have been able to if I had understood
the problem sooner.
David
KD4NUE
-Original Message-
From: Tom Thompson [mailto:[EMAIL PROTECTED]
Sent: Monday, May 12, 2008 9:20 AM
ollar
Behringer model could be bought for less than three to five hundred
dollars...
I am not a fan of theirs, nor do I own any of their gear, but do appreciate
the research, and will keep it in mind.
David
KD4NUE
-Original Message-
From: Jim Lux [mailto:[EMAIL PROTECTED]
Sent: Sunday, M
s, Do that, take 2 aspirins and pay $49.00 for tech support
Fork 2: Hi, I am David from Flex-Radio customer support. The problem you
describe is fairly common. It was shortcoming in the choices originally
made for distribution. We charge $49.00 for tech support to defray the time
spent on the phone
ta 44 sound card. I know that some folks out there are having good
luck with this combo, so apparently they have discovered the secret.
I really would appreciate some direction on this that will provide positive
results.
Thanks,
David
KD4NUE
-Original Message-
From: [EMAIL PROTE
in simplex communications, it can certainly be applied to and
trained on in 2m repeater nets.
This is one area in which MARS training has really had a great impact. We
learned the hard way the need to train the way we would operate in an
emergency.
David
KD4NUE
-Original Message
CONUS) or trade for/toward an ALS-600S, FL-7000 or other
solid-state amplifier.
David
KD4NUE
kd4nue at se-hams dot com
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Arc
Eric,
Is it going to be possible for both displays (Rx1 & Rx2) to show the split (and
adjustable) Panadaptor AND Waterfall for both receivers simultaneously???
What impact will this have on CPU usage??
Regards
David - G4PNX
___
FlexRadio Sys
obtain accurate
results.
Short answer, amplifier efficentcy is lessened as frequency increases.
Hope this makes some sense, and any official reply will definitely trump
this guestimation.
David
KD4NUE
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
I got one a few weeks back, so they are still available.
David
KD4NUE
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Naruta
Sent: Sunday, April 27, 2008 9:16 PM
To: K6JEK
Cc: FlexRadio Reflector
Subject: Re: [Flexradio] D44 Interface kit available
Phil,
This is a long shot, but ALC will vary dependent on SWR.
Tune for best match on 20m, then do the mic setup and check ALC, then try
again.
David
KD4NUE
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Phil LaMarche
Sent: Sunday, April 27
Ian Scoble wrote:
> Has there been a price increase on the Flex5000 or are the UK dealers
trying
> to make a quick buck by increasing the price by approx $400 dollars
Don't forget VAT and import duty as well.
Unless you negociate a *very* good bulk purchase deal, the import/VAT
can sometimes
Tim,
Thanks for reinstating the 2nd RX etc on the Product Status page.
Is the price of the 2nd RX still expected to be somewhere in the region of $800?
73
David - G4PNX
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
I note that the 2nd Rx and 2mtr Transverter appear to have been dropped from
the above following the update on 28 March.
Can you reinstate them please?
Regards
David - G4PNX
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
I have a SDR 1000 for sale: 100 watt and perfect condition; also have a
FA66 fire wire ext. sound card and cables. Please make a reasonable offer.
My cell # is 214-498-1000. Thanks.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mai
Any chance of an update on where you are at with v1.10.5 or even, dare I ask,
V2??
David - G4PNX
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail
n outboard
dialknob in the manner outlined by Bill???
Regards
David Painter - G4PNX
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com
g the database from v1.10.3, as well as starting with a
database from scratch.
The problem remains.
Any help appreciated, but until then I'm back to v1.10.3!!!
73
David, G4YTL
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http:/
I still can't get this to work!!
Is there anybody in the UK, within about 50 miles, who has successfully
installed an external clock into a SDR-1000? I don't know if my problem is my
10MHz source, or my installation into the rig.
Thanks
73
Da
Sorry if I've missed this before or, as is quite possible, I'm being stupid.
Just upgraded from 1.10.2 to 1.10.4 - when I run WSJT I can receive OK, but
when I go to transmit I generate no tones. I guess a VAC problem but I can't
fix it. Runs fine if I go back to 1.10.2.
Thank
Operating on 75 meters for about 4 hours, the receiver locked up once, I
also noticed a high SWR warning when transmitting into a known 1 to 1
match, but just one time in 4 hours of operation, then the radio locked
up again after further operation and would not receive and would not
reset by hi
Downloaded the new firmware 1.1.10, SVN 2000, keyed and unkeyed radio
with MOX many times(30) no drop out of receive, until joining a QSO
then after several transmissions the drop out returned. Could it be
that when RF is present it causes the problem?
Dave-W4DWG
I disconnected my Griffin Powermate and the problem still persists. I
am running 1.10.4 SVN 1963, P-4 3.2 , L-2cache , 2 gig RAM. I use VOX
so when it hangs up I tap the mic to clear problem. I can find no
consistency to the problem. I can go for several transmissions with no
problem and th
Gerald, thanks for your attention and I have no doubt that it will be
taken care of. I wish I could re-create it but it is very random.
Dave - W4DWG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
I just had the rx drop out during a QSO, listened closely and could hear
signals very much attenuated but they were there.
Dave-W4DWG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-
Jeff: I have noticed the very same thing concerning seeing high SWR at
the Flex 5000 when I have a 1to 1.
Dave-W4DWG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archiv
I, as does Jeff I just hit mox or just tap mic when using vox
Dave-W4DWG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40fl
When using an external clock, is it necessary to re-run set-up and tick the box
for an external clock?
I installed a clock but it didn't work - and thinking about it afterwards I
wonder if not re-running set-up was the problem.
Thanks
David,
Great to see a new Release with many great changes, would like to see
the ability to change colors and sizes as with K6JCA changes.
Dave-W4DWG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexra
smit audio to feed
to an external transmitter?
Thanks
David
KM5TZ
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex
implemented without the new architecture?
73
David - G4PNX
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071230/81bf01bf/attachment.html
Years ago there was a mode called CCW I remember reading about that
used very narrow bandwidths and the transmitter and receiver had to be
time synced.
Anyone doing that sort of contacts now based in software over the old
synchronous detector using sample and hold hardware?
--
If you can read, t
Hi all - I wish to select my beverages and other relay operated items from my
remote location - has anyone written a program similar to the SDR 1K where a
matrix is selected and the output is directed to the RS 232 port or possible
the parallell port - to switch a transistor and subsequently a r
501 - 600 of 788 matches
Mail list logo