I have finally found a PCI bus PCMCIA card reader that
works !!!
(It's a PCD-RP-220EP/n 720NNR220ZZ10 by PC Card )
and there is just one question...
Is the failure to flush the cache a problem, or am I missing a
command sequence between the umount and the physical eject?
see << ma
Hi Dave,
The reason you have access to your webserver from external sites is
somewhat the reason why you don't have internal access (by name) to your
webserver.
The gateway passes requests to port 80 it receives from its *external*
interface to port 80 on your webserver. From an internal host,
Hello,
* David Loszewski ([EMAIL PROTECTED]) wrote:
> I'm having a problem where I can't access my webpage internally but can
> access it externally. I'm running all FreeBSD 4.6.2 and 4.7 machines
> and have no internal namerserver of anytype. do I need to create an
> internal nameserver for
Hello!
I have just made a cvsup to all source tree. All the files received is with
",v". I cannot biuldwold because it says don't know how to make buildworld.
I do
make buildworld from directory where is the new sources. What can I do?
Thank you!
_
I'm having a problem where I can't access my webpage internally but can
access it externally. I'm running all FreeBSD 4.6.2 and 4.7 machines
and have no internal namerserver of anytype. do I need to create an
internal nameserver for myself to type in my domain name and come up
with my webpage
ok, this one is tough. I am writing 4 scripts- 2 sdevlope webforms, and are
done, no problem. The other two respectively create or destroy email lists. Or
at least that's the goal.
Sendmail is VERY persnickity about permissions and ownerships for the aliases
files- at least. I have edited sendm
On Thu, Dec 12, 2002 at 10:07:46PM -0500, Brian T. Schellenberger typed:
>
>
>
> On Thursday 12 December 2002 03:45 pm, Brian wrote:
> | getting vnc to start at boot is tricky, since you want it to start as
> | some user, rather than as root. A solution I've been thinking of is
> | looking at t
> 2. Tell drive to report as 33G instead of 80G and restart
Why do you want the drive to report as 33Gb instead of 80Gb ?
I installed FBSD on a IBM 60 Gb HD on an old PC (so BIOS not detecting 60Gb but
8Gb if I remember correctly) and FreeBSD simply reconized the whole HD.
Have you tried to upgra
Quoting "Nopbhol N.Dumrong" <[EMAIL PROTECTED]>:
> Can I solve this problem? Number of clients are very large? or
> depend on my link speed?
>
> external link to ISP is 128Kb
You're kiding right?
128Kbits for 100 people ??
It's like having a small piece of bred for 100 people.. and everybody is
Hello all!
I just recently wiped out my FreeBSD system for reasons I won't get into
here and began installing a fresh copy.
Anyway, my computer requires the Ontrack Dynamic Drive Overlay because of a
BIOS limit of 33Gig. I have installed the DDO software just like I did
before but when I go to in
> Do we know please, which Lap Top brand is trouble free
> to handle FreeBSD installation & configuration.
> At the present time I have TOSHIBA 355 CDS and lot of
> problems related to GUI and network.
> I would appreciate any thoughts / suggestions that can
> put me on a right track and direction.
I useFreeBSD4.5 and set it to run squid. My network has about 100
clients. If
all of them run IE, access time will drop and very slow to access web
page. Can I solve this problem? Number of clients are very large? or
depend on my link speed?
detail of my server:
FreeBSD4.5 + squid service + name
- Original Message -
From: BSD baby <[EMAIL PROTECTED]>
Date: Thu, 12 Dec 2002 21:17:00 -0800
To: [EMAIL PROTECTED]
Subject: How do I patch my change into a source file in ports?
> I made a change . . .
. . .
A really dirty way to do it would be to:
make extract patch;
[patch your
- Original Message -
From: Adam Weinberger <[EMAIL PROTECTED]>
Date: Thu, 12 Dec 2002 21:11:14 -0800
To: Vishal Sharda <[EMAIL PROTECTED]>
Subject: Re: your mail
> >> (12.12.2002 @ 2104 PST): Vishal Sharda said, in \
0.2K: <<
> > I need information regarding functions splx() and \
splpe()
I made a change to this file:
/usr/ports/sysutils/cdrtools/work/cdrtools-1.11/cdda2wav/cdda2wav.c
and I want my change to the source file to "stick" when building the port.
Seems if I do a "make clean install" it kills my change to the source file.
Do I need to add my diff change to a patch file
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
>> (12.12.2002 @ 2104 PST): Vishal Sharda said, in 0.2K: <<
> I need information regarding functions splx() and splpe(). What do these functions
>do exactly.
>> end of "" from Vishal Sharda <<
RTFM.
man splx
# Adam
- --
Adam Weinberger
vectors.c
I need information regarding functions splx() and splpe(). What do these functions do
exactly.
Regards,
Vishal.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
On Thu, 12 Dec 2002, Thomas Connolly wrote:
> Date: Thu, 12 Dec 2002 20:51:06 -0700
> From: Thomas Connolly <[EMAIL PROTECTED]>
> To: FreeBSD Questions <[EMAIL PROTECTED]>
> Subject: Screen shots?
>
> Can someone tell me how to take a screen shot using KDE3?
If you have ImageMagick installed, al
On Thu, Dec 12, 2002 at 12:07:13AM -0600, Glenn Johnson wrote:
> On Wed, Dec 11, 2002 at 01:16:23PM -0200, Mario Sergio Fujikawa Ferreira
> wrote:
> >
> > I've just acquired a UPS compatible with upsilon 2000 software
> > for Windows. I would like to know if anyone knows of a unix package
> >
Do we know please, which Lap Top brand is trouble free
to handle FreeBSD installation & configuration.
At the present time I have TOSHIBA 355 CDS and lot of
problems related to GUI and network.
I would appreciate any thoughts / suggestions that can
put me on a right track and direction.
Thank you,
There are tonnes of programs that can do this, two such programs are:
/usr/ports/graphics/gimp
/usr/X11R6/bin/xwd
>Can someone tell me how to take a screen shot using KDE3?
- aW
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the messa
Thanks for the info on the screenshots. Another question, how can I change
the default browser that KDE uses from Konqueror to Mozilla?
Thanks,
--
Thomas Connolly
President
Electrosoft Solutions, Inc.
Phone: (970) 222-7844
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "
> Can someone tell me how to take a screen shot using KDE3?
I am not sure about KDE3 specific things, but I have taken screen shots
with xv. /usr/ports/graphics/xv
- Mike Hogsett
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Can someone tell me how to take a screen shot using KDE3?
--
Thomas Connolly
President
Electrosoft Solutions, Inc.
Phone: (970) 222-7844
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
On Thursday 12 December 2002 03:45 pm, Brian wrote:
| getting vnc to start at boot is tricky, since you want it to start as
| some user, rather than as root. A solution I've been thinking of is
| looking at the output os ps auxw, grepping for Xvnc owned by the
| desired user, if its there exit,
Ïðåäëàãàåì êîìïëåêñíûå ðåìîíòû êâàðòèð ïî ñàìûì íèçêèì öåíàì (îò 35 ó.å.).
FRYYGEKOGGVEXWKKDIVHYOTTYQUQXHGKPSWMIR
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
[Format recovered--see http://www.lemis.com/email/email-format.html]
Long/short syndrome.
On Thursday, 12 December 2002 at 18:10:37 -0800, Matt Ruby wrote:
> --- Greg 'groggy' Lehey <[EMAIL PROTECTED]> wrote:
>> On Sunday, 8 December 2002 at 9:17:53 -0800, Matt
>> Ruby wrote:
>>> Is this possib
--- Greg 'groggy' Lehey <[EMAIL PROTECTED]> wrote:
> On Sunday, 8 December 2002 at 9:17:53 -0800, Matt
> Ruby wrote:
> > Is this possible?
> > ...
>
> Yes.
>
> > ...
>
> In the case of a failed drive, Vinum knows all about
> it, just not
> where it is. In your case Vinum doesn't know about
>
Hey all,
I'm building a Snort box and want to have two ip-less nics for detecting
and one with IP for management. Using the hardware I've got (since we're in
a budget crunch), I've scavenged together a Compaq Deskpro 4000, which has
a built-in 10/100 NIC, to be used for management and a couple
At 07:47 PM 12.12.2002 -0500, John Straiton wrote:
>
>
>John Straiton
>[EMAIL PROTECTED] - 704-365-9970
>==
>Please reply to [EMAIL PROTECTED] instead of directly to me so that the
>first available engineer might help you
>
>
>> -Original Message
> Panic: pmap_bootstamp: no local apic!
> mp_lock=0007; cpuid=0; lapic.id=
> Uptime: 0s
>
> I now it is kernel panic but why ?
Are you using standard GENERIC and LINT file?
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Hi, thats me again :-(
When I compile and install this my kernel i want boot a new kenrel but i
get that:
Panic: pmap_bootstamp: no local apic!
mp_lock=0007; cpuid=0; lapic.id=
Uptime: 0s
I now it is kernel panic but why ?
Please help me!
Radoslaw Bolforski
[EMAIL PROTECTED]
To Un
John Straiton
[EMAIL PROTECTED] - 704-365-9970
==
Please reply to [EMAIL PROTECTED] instead of directly to me so that the
first available engineer might help you
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On
you can create a dynamic hostname with dyndns.org and update it with
ddclient, and create a CNAME entry for your machine and alias it to the
dyndns hostname at your DNS. (i have home.andrewng.com to point to my machine
behind a cable modem with a dynamic IP address)
you can just set the DNS to tha
Port: cvsbook-1.21
Path: /usr/ports/devel/cvsbook
Info: A tutorial and reference for CVS
Maint: [EMAIL PROTECTED]
Index: devel
B-deps:
R-deps:
- aW
Does anyone know if there is a way to have CVS log all activity to a
log file. Basically, I'd like a log of all checkouts,
Hi all,
Does anyone know if there is a way to have CVS log all activity to a
log file. Basically, I'd like a log of all checkouts, updates, imports
and commits. I've already got it logging imports commits, but I can't
work out how to log the other stuff.
TIA,
--
- Wayne Pascoe
I have a ver
- Original Message -
From: "Kliment Andreev" <[EMAIL PROTECTED]>
To: "Drew Tomlinson" <[EMAIL PROTECTED]>; "FreeBSD Questions"
<[EMAIL PROTECTED]>
Sent: Thursday, December 12, 2002 12:21 PM
Subject: Re: Error: short read
> > I have downloaded the Helix Universal Server binary from
RealNet
G'day everyone,
I sent this a couple of days ago, but someone hijacked the thread so
I have sent it again. I've added my most recent crash dump, this time
it occurred during a rm -rf * in /usr/src. I'm starting to despair here,
is it hardware/software or what?
==Previous message
Hello,
I'm trying to build gd-1.8.4 and it is failing fairly quickly. I'm
hoping someone could enlighten me as to why. I am using portinstall to
install it, but get the same result if i just use make in
/usr/ports/graphics/gd.
here is the output of `portversion`, followed by output of `portin
(Sorry if this gets double-posted, I don't think I sent it correctly the first
time)
I have two FBSD NIS machines, the master is running 4.6 and the slave is at
4.7. The slave works properly, it's the master that is acting strangely.
The master is also serving as a router with 2 nic cards, and
Hello,
!
If you have been looking for information on Online Money Making
Programs, This is probably what you require
to help
I want to create a number of small RAM disks on some webservers so they
can serve high traffic content directly off of RAMdisks instead of
conventional disks or NFS.
I first tested this out on my desktop machine 4-7 stable and everything
worked just fine. I made 3 10Mb RAMdisks and mounted then
On 2002-12-12 20:30, Paul Everlund <[EMAIL PROTECTED]> wrote:
> Jens Rehsack wrote:
> >Paul Everlund wrote:
> >>C J Michaels wrote:
> >>>Some time in the recent past Paul Everlund scribbled:
>
> What does this mean?
>
> # sysctl kern.msgbuf
> [snip]
> <5>/var: optimization
On Thursday 12 December 2002 04:09 pm, Janine C.Buorditez wrote:
> Hi.
>
> I'm curious what to do after:
>
> aegis# rpm -i --ignoreos --root /compat/linux --dbpath /var/lib/rpm
> acroread-5.0.6-1.i386.rpm
>
> Since:
> ::: johann[aegis] [~] % /usr/compat/linux/usr/bin/acroread
> ::: [22
I have two FBSD NIS machines, the master is running 4.6 and the slave is at
4.7. The slave works properly, it's the master that is acting strangely.
The master is also serving as a router with 2 nic cards, and is running ntpd.
It processes NIS stuff, just *really* slowly. It is not doing fire
Hi,
I need to power on my computer by the internal BIOS clock. No problem, if
I power off the machine with linux. But if I use halt -p out of freebsd it
halts and powers off, but it won't reboot to the time I specified in the
BIOS. Are there any compile options for APM or should I wait for ACPI in
peek at
http://docs.freebsd.org/cgi/getmsg.cgi?fetch=14954+0+archive/2002/freebsd-mobile/20020623.freebsd-mobile
found via google.
Bri
On Thu, 12 Dec 2002, Mantas Smelevicius wrote:
> Hi everyone,
>
> I have installed 4.7 in to my laptop, but I have probs with sound card. Any
> ideas?
>
Daniel HARTMANN wrote:
J'utilise vnc vers ma machine Freebsd.
Mais comment démarrer "vncserver" automatiquement au boot sans taper la
commande ??
/etc/rc.local
ajoute ta ligne pour lancer vncserver dedans
A+
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-question
Hi everyone,
I have installed 4.7 in to my laptop, but I have probs with sound card. Any
ideas?
Thanks
Mantas Smelevicius
http://mantas.lt
ICQ UIN 31072511
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
On Thu, 12 Dec 2002 22:09:36 +0100
Janine C.Buorditez <[EMAIL PROTECTED]> wrote:
Hi,
> ::: johann[aegis] [~] % /usr/compat/linux/usr/bin/acroread
> [22:06]
> ERROR: Cannot find installation directory.
>
> And there is no /usr/local/Acroread5.
>
> Anybody?
I feel a very strong sen
Hello,
I have a Compaq Persario 5360 and I'm trying to install 4.7.
The problem is I can not get the system to boot off 3.5"
floppy drive. The system is old enough so booting off the
cd-rom is not possible.
I know you can boot off the floppy driver because I can boot
DOS and I'm sure the diskette
Hi.
There are a lot of CD players that can't read my audio CD,
made with this command:
cdrecord -v dev=0,3,0 speed=4 -audio -pad *wav
Is this because of the way I burn it or the thing I burn it on?
--janine
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in
Hi.
I'm curious what to do after:
aegis# rpm -i --ignoreos --root /compat/linux --dbpath /var/lib/rpm
acroread-5.0.6-1.i386.rpm
Since:
::: johann[aegis] [~] % /usr/compat/linux/usr/bin/acroread [22:06]
ERROR: Cannot find installation directory.
And there is no /usr/local/Acroread
Hello!
I have a /48 delegation from Access to Six.
I can't seem to get much out of this:
# IPv6 NETWORK CONFIGURATION
#
ipv6_enable="YES"
ipv6_gateway_enable="YES"
gif_interfaces="gif0"
gifconfig_gif0="192.168.187.1 62.61.157.209"
gifconfig_lo0="inet6 3ffe:80ee:1075::1200 prefixlen 128"
rtadvd_
getting vnc to start at boot is tricky, since you want it to start as some
user, rather than as root. A solution I've been thinking of is looking at
the output os ps auxw, grepping for Xvnc owned by the desired user, if its
there exit, if not run vncserver as the user in question. Putting it in
c
althought I always use usr modems, any non winmodem should work, externals
are safer in a lot of ways.
Brian
On Thu, 12 Dec 2002, [ISO-8859-1] Tuomas Pellonperä wrote:
> Hi!
>
> I hope this list is the right medium to ask this question. If not,
> please notify me.
>
> Are Multitech Mode
the fact that your ip will occasionally change complicates the problem,
you'll need a solution targeted at that, tzo.com is one example.
Brian
On Wed, 11 Dec 2002, Bsd Neophyte wrote:
>
> Alright, this is what I want to do...
>
> I have a cable connection that uses DHCP, giving me a lea
On Thu, 12 Dec 2002, Radoslaw Bolforski wrote:
> Date: Thu, 12 Dec 2002 21:08:07 +0100 (CET)
> From: Radoslaw Bolforski <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: PRoblem with kernel compilation
>
> Hi!
>
> I have a very slow machine (p133 and 16mb ram) when I compile the freebsd
> k
> I have downloaded the Helix Universal Server binary from RealNetworks.
> As I understand it, the binary is a self-extracting archive. I have run
> the binary and get the following error:
> blacklamb# ./rs900-freebsd4-ia32.bin
> Extracting files for RealNetworks installation...
> Error: short rea
Hi!
I have a very slow machine (p133 and 16mb ram) when I compile the freebsd
kernel I have some error when kernel is linking:
linking kernel
kbd.o: In function `kbd_register':
kbd.o(.text+0x35c): undefined reference to `kbddriver_set'
kbd.o(.text+0x363): undefined reference to `kbddriver_set'
kb
I have downloaded the Helix Universal Server binary from RealNetworks.
As I understand it, the binary is a self-extracting archive. I have run
the binary and get the following error:
blacklamb# ./rs900-freebsd4-ia32.bin
Extracting files for RealNetworks installation...
Error: short read (0/86262
Jens Rehsack wrote:
Paul Everlund wrote:
C J Michaels wrote:
Some time in the recent past Paul Everlund scribbled:
>Hi list!
>
>What does this mean?
>
># sysctl kern.msgbuf
>[snip]
><5>/var: optimization changed from TIME to SPACE
><118>Dec 10 11:36:12 fw /kernel: /var: optimization changed f
On Thu, 12 Dec 2002 09:43:34 -0600
Dan Nelson <[EMAIL PROTECTED]> wrote:
> In the last episode (Dec 12), Paul Murphy said:
> > I am having trouble understanding what is the difference between
> > "$variable" and "${variable}".
> >
> > I have read sh(1) and understand than ${} is a "parameter"
in message <[EMAIL PROTECTED]>,
wrote parv thusly...
>
> in message <[EMAIL PROTECTED]>,
> wrote Mark-Nathaniel Weisman thusly...
> >
> > Is there a command that I can check to see if a particular package was
> > installed ... the way it was supposed to?
...
> # given a package name, see if file
> Mais comment dщmarrer "vncserver" automatiquement au boot sans taper la
> commande ??
Create the following file vnc.sh in /usr/local/etc/rc.d and put the
following lines
#!/bin/sh
/usr/X11R6/bin/vncserver &
It will "automatique" start vncserver when you reboot.
To Unsubscribe: send mail t
in message <[EMAIL PROTECTED]>,
wrote Mark-Nathaniel Weisman thusly...
>
> Is there a command that I can check to see if a particular package was
> installed in the kernel the way it was supposed to?
on way is to check if the supposedly installed files actually
exists. sometimes they do not. try
Bonjour,
J'utilise vnc vers ma machine Freebsd.
Mais comment démarrer "vncserver" automatiquement au boot sans taper la
commande ??
Merci
Dany_H ;-)
<>
test
CDJUUKQBZNSZDBBGWSXPHZHQSSYJHQCSEBCLTC
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
On Thu, 12 Dec 2002 01:36:42 -0700
"Alex Teslik" <[EMAIL PROTECTED]> wrote:
> Hello,
>
> After searching the ports and google, I'm stumped. How can I unpack a .deb on
> FreeBSD?
Debian packages are ar(chives) containing gzipped tarballs.
Having said this, ar x $DEB data.tar.gz extracts the data
please keep the line length below 75 characters. thank you.
# [EMAIL PROTECTED] / 2002-12-12 07:59:22 -0500:
> I am having trouble understanding what is the difference between
> "$variable" and "${variable}".
if the variable name is really "variable", then none.
> I have read sh(1) a
In the last episode (Dec 12), Stephen Hoover said:
> Thought I would post this information to the list in case anyone else
> had a similar problem.
>
> Following a suggestion I found on a web page under a google search, I
> created the following symlink:
>
> /usr/lib/libmysqlclient.so -> /usr/loc
In the last episode (Dec 12), Paul Murphy said:
> I am having trouble understanding what is the difference between
> "$variable" and "${variable}".
>
> I have read sh(1) and understand than ${} is a "parameter" and can
> contain more than just a variable, but browsing through /etc/rc I
> see
Thought I would post this information to the list in case anyone else
had a similar problem.
Following a suggestion I found on a web page under a google search, I
created the following symlink:
/usr/lib/libmysqlclient.so -> /usr/local/lib/mysql/libmysqlclient.so.10
I am not sure where in the sou
In the last episode (Dec 12), Alex Teslik said:
> Hello,
>
> After searching the ports and google, I'm stumped. How can I unpack a
> .deb on FreeBSD?
.deb files are just ar archive files, same format as usr/lib/libc.a.
You can view the file list with "ar t file.deb", and extract the
contents wit
Simas,
Thanks for the reply. I ran the command you listed below and it did not
return any result. I looked at the directory and it is not group
writeable.
I must continue my research!
Thanks again,
Stephen Hoover
Dallas, Texas
> -Original Message-
> From: Simas Cepait
Sendmail isn't what gives someone POP3 access. Something like Qpopper
does.
However, most of the sendmail+(something) combinations you're going to
find are going to require you to build "full blown" accounts for each
user. While they do not have to have shell access, they will have a
/home directo
On Mon, 9 Dec 2002 23:32:27 -0500, David Banning wrote:
>> >> /usr/libexec/ld-elf.so.1: /usr/lib/libm.so.2: Undefined symbol
>> >
>> >Does /usr/lib/libm.so.2 exist?
>>
>> seems to:
for anyone running Frontpage 5.0 (and probably 4.0), and planning to
upgrade to 4.7-STABLE after 11-10-02 (i believ
I am having trouble understanding what is the difference between "$variable" and
"${variable}".
I have read sh(1) and understand than ${} is a "parameter" and can contain more than
just a variable, but browsing through /etc/rc I see lots of "${variable}" (i.e. "case
${svc_val} in").
Is this
Hi.
My tunnel broker explains to me my IPv6 setup only through commands and not
concrete settings in /etc/rc.conf. Can anyone help me out judging from this?:
@@
ifconfig $TUNLIF create tunnel $MYIPv4 $XSIPv4 up
route add -inet6 default -interface $TUNLIF
ifconfig lo0
Bsd Neophyte wrote:
I've been told I can use these free third party domain name servers. I've
also been told that you need to keep a record with at least 2 domain name
servers when hosting a domain name. While, I can do this, I'd like to
host at least one DNS at home.
Now, I'm completely confu
Hello,
* default ([EMAIL PROTECTED]) wrote:
> hello,
>
> i have freebsd setup as a server with the normal ftpd running on it. i have
> been using it for quite a while but someone has just brought to my attention
> that one cannot list directories when ftping from a linux box. i duplicated
> this
Hi!
> > I am wondering how I can add mail acocunts without
> > actually creating full-blown user accounts for my lan
> > users.
Take a look at Cyrus IMAP server (in ports, of course). I'm using it to
host ca 80 mail accounts without the need to create unix accounts for
users. Only difference fr
> However, I don't know how to distinguish more than one domain name
> when using only one IP address.
Domains are controled by their zonefiles in bind.conf
The (separate) zonefiles contain the ip# of the zone. There is no reason
you can't give blah.cx and blahbla.nt the same ip. As long as you
pro
On Thu, Dec 12, 2002 at 09:09:04AM +, Matthew Seaman wrote:
> Of the shells bundled with FreeBSD, /bin/sh uses the standard command
> version and /bin/tcsh uses a shell built-in that by default has the
> same behaviour as /bin/echo:
Correction: /bin/sh has a built-in echo command that underst
On Thu, Dec 12, 2002 at 07:14:28PM +1100, BSD Freak wrote:
> Just tried the following and it doesn't seem to work.. any explanations?
>
> %echo first line \\n second line
>
> Output is:
> first line \n second line
echo is both a shell built-in and a standard command. The standard
command does
Hi!
I hope this list is the right medium to ask this question. If not,
please notify me.
Are Multitech Modems, both internal and external, (ZPX 56K & ZPXE
56K) known to work with FreeBSD without any problems? According
to "Linux Hardware Compatibility HOW-TO" and "Modem-HOWTO", they work
fin
Octavian Hornoiu wrote:
What is the process to set up a FreeBSD server as a router to use two internet
connections and dynamically assign workstations to the two internet connections
depending on load so that neither of the connections get overly saturated at
the expense of not using the other?
On Wed, Dec 11, 2002 at 11:35:27PM -0900, Mark-Nathaniel Weisman wrote:
> Is there a command that I can check to see if a particular package was
> installed in the kernel the way it was supposed to? Or maybe a list of
> all installed packages? I've installed a module for my Perl, and I want
> to ma
Is there a command that I can check to see if a particular package was
installed in the kernel the way it was supposed to? Or maybe a list of
all installed packages? I've installed a module for my Perl, and I want
to make sure I installed it correctly.
His Faithful Servant,
Mark
To Unsubscribe: s
On Thu, Dec 12, 2002 at 07:14:28PM +1100, BSD Freak wrote:
> Hi guys,
>
> Just tried the following and it doesn't seem to work.. any explanations?
>
> %echo first line \\n second line
>
> Output is:
> first line \n second line
According to the man-page, echo(1) is working as advertised. What y
On Thu, Dec 12, 2002 at 02:58:49PM +1100, Keith Spencer typed:
> Hi all,
> I am wondering how I can add mail acocunts without
> actually creating full-blown user accounts for my lan
> users.
Not exactly what you are asking, but you could run sendmail in a
jail(8). That way, you have a passwd file
Hello,
After searching the ports and google, I'm stumped. How can I unpack a .deb on
FreeBSD?
Thanks,
Alex
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Hi guys,
Just tried the following and it doesn't seem to work.. any explanations?
%echo first line \\n second line
Output is:
first line \n second line
Can anyone help?
Thanks in advance...
-
Faxes delivered directly to an
On Wed, Dec 11, 2002 at 07:57:06PM -0600, default wrote:
> hello,
>
> i have freebsd setup as a server with the normal ftpd running on it. i have
> been using it for quite a while but someone has just brought to my attention
> that one cannot list directories when ftping from a linux box. i duplic
Does Sybasse V11 is certified on FreeBSD
Does any one of you alreday perform install/and test t an Oracle 9I
Database on FreeBSD.
I know that Oracle is not actually available on this OS
Thanks for your help.
Best regards
P. Dimpre
begin:vcard
n:Dimpre;Patrick
tel;cell:+33 (0)6 08 94 23 82
tel
95 matches
Mail list logo