At 01:48 AM -0400 04/24/2004, Laurent Daudelin wrote:
Is it possible that a trackpad on a Pismo would slowly die?
It's possible. But you might want to investigate software
possibilities first. Boot on OS 9 (if you were using OS X). Boot
with extensions off. IOW, eliminate / change the
If the app you want to use supports it, have emails only from people in her
address book go to the inbox and the rest to the trash. You can't get email
from new people who want to contact you, but it might be an acceptable
trade-off. I get closer to this everyday. :(
On Wed, 21 Apr 2004, John
on 24/04/04 09:24, [EMAIL PROTECTED] at [EMAIL PROTECTED] wrote:
At 01:48 AM -0400 04/24/2004, Laurent Daudelin wrote:
Is it possible that a trackpad on a Pismo would slowly die?
It's possible. But you might want to investigate software
possibilities first. Boot on OS 9 (if you were using
Good suggestion. I woke up my Pismo this morning and I was able to move the
trackpad sligthly (2) but then it stopped responding. Weird...
-Laurent.
Have you checked the cable connection at the trackpad? It may have
worked itself loose - what you are describing sounds a bit like heat
causing
At 09:29 AM -0700 04/24/2004, Nick Marshall wrote:
If the app you want to use supports it, have emails only from people in her
address book go to the inbox and the rest to the trash. You can't get email
from new people who want to contact you, but it might be an acceptable
trade-off. I get
on 24/04/04 13:55, Andrew Kershaw at [EMAIL PROTECTED] wrote:
Good suggestion. I woke up my Pismo this morning and I was able to move the
trackpad sligthly (2) but then it stopped responding. Weird...
-Laurent.
Have you checked the cable connection at the trackpad? It may have
At 5:24 pm -0700 19/4/04, Terry McCune wrote:
You may or may not go YAY to your HP 5150 printer. I have one
hitched to an eMac running Panther and your clothing could go out of
style in the time it takes to print. It also doesn't start
automatically and I get fairly frequent pen failure
Ok folks, the Powerbook is arriving Monday (it is only 5 hours from here
right now but I'm guessing they won't let me just go over and pick it up,
so I'll have to wait).
I've seen a few must have lists around [1] [2] but I'd like to hear your
favorite apps, especially those little utilities
As soon as I sent the message about must have apps, I also started to
wonder about what websites I ought to be reading for my Mac news and
information, cool tools, etc.
I've been reading MacWorld for awhile (print version, which my wife found
strange since I didn't have a Mac so I
My 333Mhz powerbook G3 (Lombard) died - the Apple repair folks said it was
a dead PMU - ordering one and installing it would cost more than the value
of the machine.
How viable is it for me to find a PMU on my own and replacing it myself
?(haven't had much luck finding any detailed info on how to
On Saturday, April 24, 2004, at 05:55 PM, Timothy J. Luoma wrote:
Ok folks, the Powerbook is arriving Monday (it is only 5 hours from
here right now but I'm guessing they won't let me just go over and
pick it up, so I'll have to wait).
I've seen a few must have lists around [1] [2] but I'd
AFAIK, Lombard can run Panther. But getting a PMU Down
Under, I don't know. Installing is not a bad idea, if
you're capable.
Depends on your budget. Did 'they' offer you a
trade-in - I'm guessing not? Check in Aussie land if
there's a used Mac dealer or private seller. Compare
the costs.
George
Hi
Are the motherboards from the 400, and 500Mhz Pismo's interchangeable?
Dean
--
G-Books is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Refurbished Drives |
-- Check our web site for refurbished PowerBooks | CDRWs on Sale! |
Support
On Apr 24, 2004, at 6:55 PM, Timothy J. Luoma wrote:
So, what's your favorite MacOSX app/utility/whatnot?
The one I would hate to be without is LaunchBar. It's a multifaceted
keyboard based launcher. A key combination (typically Command-Spacebar)
brings it up. Apps, URLs, files, etc are
On Apr 24, 2004, at 6:58 PM, Timothy J. Luoma wrote:
As soon as I sent the message about must have apps, I also started to
wonder about what websites I ought to be reading for my Mac news and
information, cool tools, etc.
MacInTouch for general Mac news and troubleshooting. MacFixit is also
Macsurfer
On Apr 24, 2004, at 8:20 PM, Jim Eddy wrote:
On Apr 24, 2004, at 6:58 PM, Timothy J. Luoma wrote:
As soon as I sent the message about must have apps, I also started to
wonder about what websites I ought to be reading for my Mac news and
information, cool tools, etc.
MacInTouch for
On Apr 20, 2004, at 10:46 PM, [EMAIL PROTECTED] wrote:
[just to confuse or clarify things a bit. :)]
Each subsystem has limitations, which become bottlenecks during one
type of load or another. So it pays to target your upgrades at the
subsystem most critical to your specific task load.
Yep,
on 24/04/04 21:07, Dean Reichert at [EMAIL PROTECTED] wrote:
Hi
Are the motherboards from the 400, and 500Mhz Pismo's interchangeable?
Yes, they are. I had a 400MHz processor and I replaced it with a 500MHz
processor daughterboard on the same motherboard and it worked just fine.
-Laurent.
I'm really big on OmniWeb. Now built on the same html rendering engine
as Safari, but can do the https thing. Plus, it's gorgeous, and a joy
to use. Version 5 is do out real soon now.
Cordially,
Tom Zahm
On Saturday, April 24, 2004, at 05:55 PM, Timothy J. Luoma wrote:
snip
I've seen a few
On Apr 23, 2004, at 1:33 PM, Tim Gochnour wrote:
On Apr 22, 2004, at 11:14 PM, P. H. Adams wrote:
As others have suggested, don't forget to de-authorize the old
computer before turning it back in.
Actually, I have two computers authorized on my account. Only
deauthorize if you are selling
Things I like (after owning my PowerBook for a little over a year):
GeekTool (http://projects.tynsoe.org) - Great tool for doing misc
things like showing a log file or a web graphic on your desktop w/o
opening a browser.
MenuMeters - CPU, RAM, Processor, Network, and Disk throughput in your
Grandfather has a PBG3 of the earlier vintage. Currently running 9.2.2
which I installed about December/03, and uses a cardbus card to provide
USB port for an epson printer. Recently started giving Bus Error -
Please restart with extensions off bomb at startup. Rebooting Ext.
Off, then a
22 matches
Mail list logo