Try http://batleth.sapienti-sat.org/projects/mb2md/
Bill Roberts
On 17:45 Fri 13 May , [EMAIL PROTECTED] wrote:
> Thanks for the excellent advice, Jonathan. Yes, I figured I'd have to
> move out of mbox sooner or later. I wonder if there are tools to convert
> mbox files to maildir format - I
Thanks for the excellent advice, Jonathan. Yes, I figured I'd have to
move out of mbox sooner or later. I wonder if there are tools to convert
mbox files to maildir format - I would guess yes.
Michael
On Fri, 13 May 2005, Jonathan Nichols wrote:
[EMAIL PROTECTED] wrote:
I already have Postfix runni
Thanks for the fine comments. You are the second to recommend
courier-imap, and I'll probably go that route.
Re the phone behavior, I wonder if the cause of yours is the same as
mine: I just discovered that although my phone can talk to IMAP servers,
it really only implements POP-like functions, so
On 5/14/05, Mark Knecht <[EMAIL PROTECTED]> wrote:
[..]
> The answer to your specific question is that you will run fdisk, you
> will create the partitions you want at the size you want with the file
> system type you want. There is no set size. there is no script to make
> it happen. It comes out
If you can, I'd sort the files in the filesystems using
du / | sort -nr > somefile
Page through the entries...
less somefile
And remove what I could...
I hope this helps...
Shawn
...see what's the biggest and work from there to do the deletes...
On 5/13/05, Nick Rout <[EMAIL PROTECTED]
Kent Borg wrote:
> Recently xmms stopped working. It will launch, but it won't play
> anything. I try to play a file and nothing happens, I try to play an
> internet stream and I get a file dialog. I think it broke in the
> upgrade from 1.2.10-r13 to 1.2.10-r5. Suggestions?
Have you recently
On 5/13/05, THUFIR HAWAT <[EMAIL PROTECTED]> wrote:
> On 5/14/05, Mark Knecht <[EMAIL PROTECTED]> wrote:
> [..]
> > Thufir,
> >I think the point you may be missing here is that there is
> > NOTHING graphical about the Gentoo installation. It is nothing
> > more than a very carefully crafted se
On Sat, 2005-05-14 at 03:37 +, James wrote:
> I had not emerged a gentoo system for a while now / is filled up.
>
> Looking for large files to remove, I found in /proc:
>
> -r 1 root root 1073672192 May 13 22:31 kcore
>
>
> I guess this is not a good file to remove?
>
> Kern
James wrote:
> I had not emerged a gentoo system for a while now / is filled up.
>
> Looking for large files to remove, I found in /proc:
>
> -r 1 root root 1073672192 May 13 22:31 kcore
Ignore /proc. It's a virtual filesystem. Nothing in /proc is actually on the
hard drive.
--
A
hi guys,
I have phppgadmin 3.5.1 and ti doesn't recognize my password in any
way. I've looked at config.inc.php and the file is OK. I also tried to
disable extra security but I can't connect even with postgres what
should works.
If I try to connect by psql I get no problem, or even if I try to
acc
I had not emerged a gentoo system for a while now / is filled up.
Looking for large files to remove, I found in /proc:
-r 1 root root 1073672192 May 13 22:31 kcore
I guess this is not a good file to remove?
Kernel images are only this big:
-rw--- 1 root root 2298699 Apr 30
Christoph Gysin gmx.ch> writes:
>
> James wrote:
> > So do I do anything or just read the emails and wait/watch?
>
> The emails inform you about the status of the request. Every change will
> generate a mail to you. You can customize your preferences on bugzilla
> if you don't want to be i
On 5/14/05, Mark Knecht <[EMAIL PROTECTED]> wrote:
[..]
> Thufir,
>I think the point you may be missing here is that there is
> NOTHING graphical about the Gentoo installation. It is nothing
> more than a very carefully crafted set of text commands.
[..]
ah, thanks for clarifying that. I
Peter Gordon wrote:
> Ian K wrote:
>
>> grep: /usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/libstdc++.la: No such
>> file or directory
>> /bin/sed: can't read
>> /usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/libstdc++.la: No such file or
>> directory
>> libtool: link: `/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3
hi guys,
I have phppgadmin 3.5.1 and ti doesn't recognize my password in any
way. I've looked at config.inc.php and the file is OK. I also tried to
disable extra security but I can't connect even with postgres what
should works.
If I try to connect by psql I get no problem, or even if I try to
acc
On Thu, 2005-05-12 at 21:12 -0700, Mark Knecht wrote:
> No, it's something more nefarious than that
>
> 1) All machines have the same hosts file. None of the machines are using dhcp.
>
> 2) The FC2 client logs into both Gentoo and FC2 hosts fast
>
> 3) The Gentoo client logs into both Gentoo
James wrote:
> So do I do anything or just read the emails and wait/watch?
The emails inform you about the status of the request. Every change will
generate a mail to you. You can customize your preferences on bugzilla
if you don't want to be informed of some events.
In the first mail, the r
>
>
> So do I do anything or just read the emails and wait/watch?
>
>
Got it in one. if an ebuild is attached to the thread, you could test it
by placing it into your portage overlay. But if your not sure, you'd be
best just watching.
The reason for the emails is to keep you informed wi
Hello,
I've just requested an ebuild package for 'jffnms' which is a system/network
management tool. I'm not sure I made the request properly, nor what to do,
if anything concerning the request I've gotten some email from the
bugzilla daemon, but I'm not sure I need to do anything.
Anyone care t
On 5/13/05, THUFIR HAWAT <[EMAIL PROTECTED]> wrote:
> On 5/13/05, Phil Sexton <[EMAIL PROTECTED]> wrote:
> [..]
> > By commands, actually. You can even install Gentoo from your
> > running Fedora installation, or from a Linux Live CD such as
> > Knoppix.
> [..]
>
> I was hoping for a screen shot
Mark Knecht wrote:
If using Firefox (compiled) as a browser should I still be using the
mozilla USE flag? This flag is still hanging about from when I used
Mozilla. Removing it seems to effect other things like Blackdown Java
which is probably used on this system by Firefox so I'm not sure of
the b
Ian K wrote:
grep: /usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/libstdc++.la: No such
file or directory
/bin/sed: can't read
/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/libstdc++.la: No such file or
directory
libtool: link: `/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/libstdc++.la'
is not a valid libtool arc
On 5/13/05, Phil Sexton <[EMAIL PROTECTED]> wrote:
[..]
> By commands, actually. You can even install Gentoo from your
> running Fedora installation, or from a Linux Live CD such as
> Knoppix.
[..]
I was hoping for a screen shot to compare against anaconda.
"The Gentoo Installation CDs are boo
A. R. schreef:
> On 5/13/05, Allan Spagnol Comar <[EMAIL PROTECTED]> wrote:
>
>>Hi All, I am having a little doubt about qt and kde user flags, I am
>>using Gnome in my system but I like some kde programs, so I have gtk
>>and gnome flag, should I use kde and qt flags to or should I put the
>>-kde
After upgrading to apache-2.0.54 dispach-conf left this code: in
my /etc/conf.d/apache2:
...
<<< /etc/conf.d/apache2
APACHE2_OPTS="-D SSL -D PHP4"
#===
#APACHE2_OPTS="-D SSL -D DOC"
>>> /etc/conf.d/._cfg_apache2
...
Was pressing "u" too fast?
Commenting out the first and last line
On Fri, May 13, 2005 8:43 pm, Thomas Kirchner said:
> * On May 13 20:30, Neil Bothwick (gentoo-user@lists.gentoo.org) wrote:
>> emerging kde, gnome and fluxbox instead of fvwm would only make the
>> world file two lines longer :)
>
> If you only install the meta-ebuilds, that's true... Perhaps I sh
Hi there,
I tried manually compiling a style (Metal4KDE) and it didn't work.
I have KDE 3.4, but I have a friend with this style working on 3.4.
Here is the configure and make output:
config.pl: fast created 5 file(s).
config.status: creating config.h
config.status: config.h is unchanged
config.st
> No activity, does not show the loaded file.
So I'm sorry. I expected that it is somehow related to the
chosen output plugin or to the sound system.
Best regards
ce
--
gentoo-user@gentoo.org mailing list
On Fri, May 13, 2005 at 10:50:14PM +0200, Christoph Eckert wrote:
>
> > Recently xmms stopped working.
> > [...]
> Does it simply not produce audio output (but show the loaded
> file and activity in the level meter), or does it even not
> show the loaded file?
No activity, does not show the lo
> Recently xmms stopped working. It will launch, but it
> won't play anything. I try to play a file and nothing
> happens, I try to play an internet stream and I get a file
> dialog. I think it broke in the upgrade from 1.2.10-r13 to
> 1.2.10-r5. Suggestions?
Does it simply not produce audio
Hi,
I emerged the game Slune, but when I try to run
"slune" from the command line, I get the following
error
/usr/lib/python2.3/site-packages/soya/model.py:20:
DeprecationWarning: The content of this module is now
in the soya module.
warnings.warn("The content of this module is now in
the soya
Recently xmms stopped working. It will launch, but it won't play
anything. I try to play a file and nothing happens, I try to play an
internet stream and I get a file dialog. I think it broke in the
upgrade from 1.2.10-r13 to 1.2.10-r5. Suggestions?
Thanks,
-kb
--
gentoo-user@gentoo.org mai
On Fri, 2005-05-13 at 07:56 -0600, Kumar Golap wrote:
> /var/tmp/portage/gcc-3.3.5.20050130-r1/work/build using "mt-frag"
> gcc: installation problem, cannot exec `as': No such file or directory
> *** The command '/usr/bin/gcc -o conftest -O2 -march=pentium3
> conftest.c' failed.
> *** You must s
Go to /home/name/.thunderbird/9qflya66.default(yours may be
different)prefs.js and add this;
user_pref("network.protocol-handler.app.http", "/usr/bin/firefox");
user_pref("network.protocol_handler.app.ftp", "usr/bin/firefox");
user_pref("network.protocol_handler.app.https", "/usr/bin/firefox");
--
Man ebuild
Also, check out the Gentoo docs on ebuilds and look at some existing ones as
guides.
>
> From: Grant <[EMAIL PROTECTED]>
> Date: 2005/05/13 Fri PM 01:55:53 EDT
> To: Gentoo mailing list
> Subject: [gentoo-user] 3rd party ebuild help (mod_perl)
>
> I'm trying to try the mod_perl-2.0
* On May 13 20:30, Neil Bothwick (gentoo-user@lists.gentoo.org) wrote:
> emerging kde, gnome and fluxbox instead of fvwm would oonly make the
> world file two lines longer :)
If you only install the meta-ebuilds, that's true... Perhaps I should
have prefaced it with a 'YMMV', but if you have thr
On Fri, May 13, 2005 5:32 pm, Thomas Kirchner said:
> * On May 13 9:06, Mark Knecht (gentoo-user@lists.gentoo.org) wrote:
>> My world file is 235 lines long. How screwed up is that really? How
>> long it yours?
>
> My world file is 135 lines, and I run a fairly minimalist desktop system
> (no DE,
Andrew Gaffney wrote:
q-parser wrote:
Arran Fraser wrote:
I recently did my first-in-a-long-while "emerge world". Now, when I
click a link in Thunderbird nothing happens. I'd like the link to be
opened in Firefox (of course). I'm using KDE.
Some
On Fri, May 13, 2005 5:30 pm, Mark Knecht said:
> On 5/13/05, Neil Bothwick <[EMAIL PROTECTED]> wrote:
>
>> This should do it, but it's a QAD kludge I haven't tested.
>>
>> cat /var/lib/portage/world | while read p; do [ $(qpkg -I -nc -q $p |
>> wc -l) -eq 2 ] && echo $p; done
>>
>
> Thanks. If I
On Fri, May 13, 2005 5:06 pm, Mark Knecht said:
> My world file is 235 lines long. How screwed up is that really? How
> long it yours?
It's not thye length, it's the amount of unnecessary content. But the
world file on my laptop is 139 lines.
> Just glancing through the file I spot very few thin
q-parser wrote:
> Arran Fraser wrote:
>
>>I recently did my first-in-a-long-while "emerge world". Now, when I
>>click a link in Thunderbird nothing happens. I'd like the link to be
>>opened in Firefox (of course). I'm using KDE.
>>
> Something similar here. I'm getting an error dialog saying: "
I have set the anoymous_enable=YES in vsftp.conf, but it still is not
accepting anonymous users. I have also restarted the server. I have
tried both anonymous and ftp, using valid e-mail addresses as
passwords. Is there another step I am missing to properly enable this?
--
gentoo-user@gentoo.org
Thanks for the explanention, so if I do not use the flags all should
be ok, and If I use the flag too I still won't have problems :)
On 5/13/05, A. R. <[EMAIL PROTECTED]> wrote:
> Hi,
>
> It is my understanding that even if you disable those flags
> (-kde -qt) and you try to emerge a package
Arran Fraser wrote:
I recently did my first-in-a-long-while "emerge world". Now, when I
click a link in Thunderbird nothing happens. I'd like the link to be
opened in Firefox (of course). I'm using KDE.
Any ideas?
--
Arran
Something similar here. I'm getting an error dialog saying:
Jaap van Geffen wrote:
> It worked allright except that emerge wants to have
> /usr/portage/net-dialup/isdn4k-utils/files/3.2_p1-r2/gentoo.patch
>
> Any idea where to find it ?
Have a look at:
http://www.gentoo.org/cgi-bin/viewcvs.cgi/net-dialup/isdn4k-utils/files/
All obsolete files are still
I'm trying to try the mod_perl-2.0.0-rc4 ebuild posted here:
http://bugs.gentoo.org/show_bug.cgi?id=77551
but when I try to generate the digest or emerge it from the overlay I get:
No digest file available and download failed.
There is also a mod_perl.patch posted a week after the ebuild. How
Hi,
It is my understanding that even if you disable those flags
(-kde -qt) and you try to emerge a package that depends
on kde and qt libraries, those will be compiled as well.
As an example, I am running xfce4 (gtk2) and my use flags have
-kde -qt, if I try to emerge k3b, it shows that it want
* On Fri May-13-2005 at 10:41:19 AM -0500, tj said:
> Sorry for the newb post here.
>
> I figured out what I screwed up. I have an e100 and I didn't get it into
> my kernel.
> Do i have to recompile? or? is there are way around it.
[I'm going to assume you used the 2005.0 CD and installed a 2.6 k
You might look at rdesktop or tightvnc.
>
> From: Mike Noble <[EMAIL PROTECTED]>
> Date: 2005/05/13 Fri AM 11:04:08 EDT
> To: Gentoo Users
> Subject: [gentoo-user] Terminal Client
>
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> I have a real need for a terminal client program for gento
If using Firefox (compiled) as a browser should I still be using the
mozilla USE flag? This flag is still hanging about from when I used
Mozilla. Removing it seems to effect other things like Blackdown Java
which is probably used on this system by Firefox so I'm not sure of
the best state for this
> > Actually, is hdparm supposed to be used when specific IDE support is
> > not included in the kernel? It sounds like the kernel optimally
> > configures your device if that support is included. hdparm sounds
> > like it does the same thing.
>
> My understanding is that the kernel will automag
On May 13, 2005, at 3:46 pm, Neil Bothwick wrote:
On Fri, 13 May 2005 15:18:22 +0100, Russ Brown wrote:
Say I run emerge -pvD world, and ten packages pop out.
I look at the list and decide that I want to emerge all but one of the
things on the list.
How do I go about this without running an emerge
On May 12, 2005, at 8:10 pm, [EMAIL PROTECTED] wrote:
I already have Postfix running and I happily read email on my server,
but I'd like to read my email on my IMAP/SSL cellphone client. I've
seen
Courier, UW, and Cyrus, and perhaps there are others. Any
recommendations, for or against?
I really l
Quoting Grant <[EMAIL PROTECTED]>:
Actually, is hdparm supposed to be used when specific IDE support is
not included in the kernel? It sounds like the kernel optimally
configures your device if that support is included. hdparm sounds
like it does the same thing.
My understanding is that the kerne
[EMAIL PROTECTED] wrote:
I already have Postfix running and I happily read email on my server,
but I'd like to read my email on my IMAP/SSL cellphone client. I've seen
Courier, UW, and Cyrus, and perhaps there are others. Any
recommendations, for or against?
Currently I'm the only user, but I host
> Hello, I need to figure out which version of mod_perl I'm running and
> the mod_perl guys are telling me to run t/REPORT. I don't seem to
> have t/report or t/REPORT anywhere on my system though. What is the
> Gentoo equivalent of this?
Nevermind, mp2bug was what I needed.
- Grant
--
gentoo
* On May 13 9:06, Mark Knecht (gentoo-user@lists.gentoo.org) wrote:
> My world file is 235 lines long. How screwed up is that really? How
> long it yours?
My world file is 135 lines, and I run a fairly minimalist desktop system
(no DE, just good ole fvwm). For a system with kde, gnome, and flux
On 5/13/05, Neil Bothwick <[EMAIL PROTECTED]> wrote:
> This should do it, but it's a QAD kludge I haven't tested.
>
> cat /var/lib/portage/world | while read p; do [ $(qpkg -I -nc -q $p | wc -l)
> -eq 2 ] && echo $p; done
>
Thanks. If I can trust the results then it reduced my world file from
Thanks for the quick responses.
I loaded the module and moved the kernel over.
I had to then run lsmod to make sure and then modprobe and get it into
the autoload.
works great.
now to get Gnome and KDE on the machine :)
- tj
*note - i will bottom post from now on- sorry :)
Mark Knecht w
On 5/13/05, Bruno Lustosa <[EMAIL PROTECTED]> wrote:
> There used to be an applet in GNOME to notify the user of new mail.
> Now I can't find it. Has it moved into a separate package?
> Using gnome 2.10 here.
Never mind... found it:
emerge -s mail-notification
Searching...
[ Results for search ke
There used to be an applet in GNOME to notify the user of new mail.
Now I can't find it. Has it moved into a separate package?
Using gnome 2.10 here.
--
Bruno Lustosa, aka Lofofora | Email: [EMAIL PROTECTED]
Network Administrator/Web Programmer | ICQ: 1406477
Rio de Janeiro - Brazil
On 5/13/05, Neil Bothwick <[EMAIL PROTECTED]> wrote:
> On Thu, 12 May 2005 12:47:36 -0700, Mark Knecht wrote:
>
> >As for proceeding with the emerge world operation I don't think
> > there's any particular order you need to go in. The order shown is the
> > was portage would handle it if you l
On Fri, 13 May 2005 08:37:34 -0700, Mark Knecht wrote:
> Neil said he dealt with the pain of this. I'd like to learn how to go
> about it. I have learned this morning that I probably have 5 machines
> that need to be looked after WRT this issue.
I did it manually, editing the world file to remove
Hello, I need to figure out which version of mod_perl I'm running and
the mod_perl guys are telling me to run t/REPORT. I don't seem to
have t/report or t/REPORT anywhere on my system though. What is the
Gentoo equivalent of this?
- Grant
--
gentoo-user@gentoo.org mailing list
On 5/13/05, tj <[EMAIL PROTECTED]> wrote:
> Sorry for the newb post here.
>
> I figured out what I screwed up. I have an e100 and I didn't get it into
> my kernel.
> Do i have to recompile? or? is there are way around it.
>
> - tj
>
Probably you do but if you do
make && make modules_install
On Fri, 13 May 2005, tj wrote:
>
> Sorry for the newb post here.
>
> I figured out what I screwed up. I have an e100 and I didn't get it into
> my kernel.
> Do i have to recompile? or? is there are way around it.
>
> - tj
>
Hi,
Just a small side-note: On this list the bottom-post is the accepte
> > I'm trying to track down my apache2 segfaults and the mod_perl guys
> > are telling me I need to get my system to dump a core file for
> > analysis. How can I do that? Should I re-emerge apache2 and apr with
> > +debug?
>
> Unfortunately just having USE=debug isn't all that you need. I use
Sorry for the newb post here.
I figured out what I screwed up. I have an e100 and I didn't get it into
my kernel.
Do i have to recompile? or? is there are way around it.
- tj
tj wrote:
well met,
I am new to gentoo and Linux. about a year or so. nothing heavy yet.
I got through my stage 1 install
On 5/13/05, Russ Brown <[EMAIL PROTECTED]> wrote:
> Neil Bothwick wrote:
> > On Fri, 13 May 2005 15:18:22 +0100, Russ Brown wrote:
> >
> >
> >>Say I run emerge -pvD world, and ten packages pop out.
> >>
> >>I look at the list and decide that I want to emerge all but one of the
> >>things on the lis
Neil Bothwick wrote:
> On Fri, 13 May 2005 15:18:22 +0100, Russ Brown wrote:
>
>
>>Say I run emerge -pvD world, and ten packages pop out.
>>
>>I look at the list and decide that I want to emerge all but one of the
>>things on the list.
>>
>>How do I go about this without running an emerge command
well met,
I am new to gentoo and Linux. about a year or so. nothing heavy yet.
I got through my stage 1 install yesterday pretty good. I can boot into
gentoo now, but it does not detect my nic anymore. It worked great on
the livecd and i had it working on my stage 2 install last week. ( i had
to
On Fri, 13 May 2005 06:24:06 -0700, Mark Knecht wrote:
> > For example. You emerge someprog, which has a dependency for somelib,
> > so emerge install both packages but only adds someprog to world. Then
> > you decide that you don't want someprog so you unmerge it, but
> > somelib is still there,
Ok, thanks for all your help, I found out: it was a faulty (new !! SATA disk).
Thanks again
Zeno
On 5/13/05, Dirk Heinrichs <[EMAIL PROTECTED]> wrote:
> Am Freitag, 13. Mai 2005 12:03 schrieb ext Zeno Davatz:
> > Yes, sorry, your are right. To much configuring in my brain.
> >
> > Check the new c
Friday 13 May 2005 17.04-n, Mike Noble ezt írta:
> I have a real need for a terminal client program for gentoo that will
> allow me to connect to a Windows machine. I know Mandrake (Mandriva)
> has one which works very nicely, but I would really like to be able
> to use gentoo.
try one of the fol
emerge -s rdesktop
* net-misc/grdesktop
Latest version available: 0.22-r1
Latest version installed: [ Not Installed ]
Size of downloaded files: 418 kB
Homepage:http://www.nongnu.org/grdesktop/
Description: Gtk2 frontend for rdesktop
License: GPL-2
* n
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have a real need for a terminal client program for gentoo that will
allow me to connect to a Windows machine. I know Mandrake (Mandriva)
has one which works very nicely, but I would really like to be able
to use gentoo.
Can anybody tell me what I ca
On Fri, 13 May 2005 15:18:22 +0100, Russ Brown wrote:
> Say I run emerge -pvD world, and ten packages pop out.
>
> I look at the list and decide that I want to emerge all but one of the
> things on the list.
>
> How do I go about this without running an emerge command with nine
> packages passed
> > HDIO_SET_DMA failed: Operation not permitted
>
> Does the kernel you built for those have support for the appropriate IDE
> controller chipset? You can get this information with
> `lspci | grep IDE'. (lspci is part of the sys-apps/pciutils package.)
>
> For example on my system I have a VIA 8
That was it.
Thanks Alin,
Sasha
> Reinstall mozilla, but this time make sure that you don't have any
> existing mozilla processes running while installing the new version.
>
>> I have a problem with recently emerged Mozilla (1.7.7)
>> Selecting Advanced or Scripts & Plug-ins in Edit->Preferences
Mark Knecht wrote:
>
>>The world file is a powerful concept in portage, if used correctly,.
>>Filling it up with a list of all installed packages completely negates
>>its usefulness.
>
>
This seems like a suitable point to ask something that has been bugging
me for a while.
Say I run emerge -p
Arran Fraser wrote:
>I recently did my first-in-a-long-while "emerge world". Now, when I
>click a link in Thunderbird nothing happens. I'd like the link to be
>opened in Firefox (of course). I'm using KDE.
>
>Any ideas?
>
>
>--
>Arran
>
>
Try something like this...
$EDITOR ~/.thunderbird//pr
Hi All,
When i update gcc
with
emerge --update gcc...it fails (the end part of the message is below).
Thanks in advance for any help/clue.
Kumar
===
* Configuring GCC with:
--enable-version-specific-runtime-libs
--prefix=/usr
--bindir=/usr/i686-pc-linux-gnu/
> On Tue, May 10, 2005 at 07:04:47PM +0200, Patrick wrote
>> Hi,
>>
>> I'm trying to get smaller fonts at boot time like the live cd
>
> Actually, you can do that on a plain ordinary text console. See my
> webpage http://www.waltdnes.org/tips_and_tricks/textmodes.html
> Here's a snippet from my
On 5/13/05, Neil Bothwick <[EMAIL PROTECTED]> wrote:
>
> Sorry, that should have read "should not be in world..."
OK, that helps.
>
> > > with the result that if
> > > you uninstall the package that required them in the first place, they
> > > will remain as useless cruft on your system and no
ok, will try. I'm starting from scratch again. I managed to boot twice
;)) but then I changed something in /etc/rc.conf and now no more boot
but only Kernel Panics.
What is the name of the PATA driver? My Primary IDE is PATA. My CD-Rom
is attached to that. My secondary IDE is SATA.
This is so str
On Fri, 13 May 2005 05:27:25 -0700, Mark Knecht wrote:
> > Doing it this way will mess up your world file.
>
> Mess up?
Yes, by adding packages that shouldn't be there.
> > Most of the packages in
> > the list are dependencies that should be in world themselves.
>
> Should be in world...
So
On 5/13/05, Neil Bothwick <[EMAIL PROTECTED]> wrote:
> On Thu, 12 May 2005 12:47:36 -0700, Mark Knecht wrote:
>
> >As for proceeding with the emerge world operation I don't think
> > there's any particular order you need to go in. The order shown is the
> > was portage would handle it if you l
Hi All, I am having a little doubt about qt and kde user flags, I am
using Gnome in my system but I like some kde programs, so I have gtk
and gnome flag, should I use kde and qt flags to or should I put the
-kde and -qt ?
--
gentoo-user@gentoo.org mailing list
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Grant wrote:
> I'm trying to track down my apache2 segfaults and the mod_perl guys
> are telling me I need to get my system to dump a core file for
> analysis. How can I do that? Should I re-emerge apache2 and apr with
> +debug?
Unfortunately just h
Am Freitag, 13. Mai 2005 12:03 schrieb ext Zeno Davatz:
> Yes, sorry, your are right. To much configuring in my brain.
>
> Check the new config. I suppose I only need the Intel PII/ICH SATA
> support (as my lspci tells me).
>
> But I get the same result; a Kernel Panic VFS not found (8,3)... but
>
I recently did my first-in-a-long-while "emerge world". Now, when I
click a link in Thunderbird nothing happens. I'd like the link to be
opened in Firefox (of course). I'm using KDE.
Any ideas?
--
Arran
--
gentoo-user@gentoo.org mailing list
On Thu, 2005-05-12 at 23:55 +0200, Christoph Gysin wrote:
> >
>
> Old ebuilds are avaible from viewcvs:
>
> http://www.gentoo.org/cgi-bin/viewcvs.cgi/*checkout*/net-dialup/isdn4k-utils/isdn4k-utils-3.2_p1-r2.ebuild
>
> Copy it to /usr/portage/net-dialup/isdn4k-utils/ and run:
>
> # /usr/portag
On Thursday 12 May 2005 19:09, Richard Fish wrote:
> Paul wrote:
> >On Thursday 12 May 2005 15:22, Richard Fish wrote:
> >>Paul wrote:
> >>>Hi all,
> >>>I posted this problem a few weeks ago and had no replies. I have tried
> >>>all sorts including re-installation of xine-lib 1.0-r2 and xine-ui
>
Yes, sorry, your are right. To much configuring in my brain.
Check the new config. I suppose I only need the Intel PII/ICH SATA
support (as my lspci tells me).
But I get the same result; a Kernel Panic VFS not found (8,3)... but
my HDD is on /dev/sda3.
Is there any why I can get more detailed in
Hi Neil,
on Thursday, 2005-05-12 at 22:18:23, you wrote:
> I'm running ~amd64 and ~ppc. I don't know if it's in the older
> baselayout, but there are a lot of differences between testing and stable
> baselayouts.
My RC_NET_STRICT_CHECKING had been set to "no" already, and I don't have support
for
Am Freitag, 13. Mai 2005 10:23 schrieb ext Zeno Davatz:
>
> I took the /proc/config.gz from the chrooted and mounted system and
> compiled a new kernel off it. I made sure that all the SATA drivers
> are (*) and not (M).
No, you didn't. All (!?) hardware drivers are M, they (or better, the one
f
Hi
I have been trying this for some days now:
I'm trying to boot onto my first Serial ATA Disk (SATA1). My config,
lspci and lsmod are attached.
When I boot from the Gentoo-Minimal-Install-CD everything works great
and the disks are correctly recognised as /dev/sda and /dev/sdb.
I took the /proc
On Thu, 12 May 2005 12:47:36 -0700, Mark Knecht wrote:
>As for proceeding with the emerge world operation I don't think
> there's any particular order you need to go in. The order shown is the
> was portage would handle it if you let it do it as one big group. I
> often opt for doing 5-10 pack
Am Donnerstag, 12. Mai 2005 21:10 schrieb ext [EMAIL PROTECTED]:
> [Something about IMAP in an unrelated thread]
Please stop thread hijacking.
Thanks...
Dirk
--
Dirk Heinrichs | Tel: +49 (0)162 234 3408
Configuration Manager | Fax: +49 (0)211 47068 111
Capgemini Deutschlan
On Fri, 13 May 2005 02:08:54 -0400, Calvin Spealman wrote:
> Thats seems a good configuration, but what about /etc/hostname? thats
> what im not sure of, how to set what the box sees as its own hostname,
> without setting it to the domain (because thats the router/network),
> but still with Postfi
1 - 100 of 103 matches
Mail list logo
