I've been running a mobile A8 quad core with a 6000 series GPU for about a
year under 3.x kernels and open source x.org drivers. Not a hiccup.
On Jul 22, 2013 3:57 PM, Alexander Puchmayr alexander.puchm...@linznet.at
wrote:
Hi there,
I'm thinking of bying a quad-core cpu, preferably an amd
I personally have this setup running on Windows on my home network. XBMC
has uPNP built in which allows streaming to or from my home theater setup
from either my Android phone or another uPNP machine on my network. It's by
far yhe easiest solution I could come up with. Even lets me stream 1080p
There is absolutely no reason why you can't use the vanilla kernel. Go
right ahead.
On Dec 24, 2012 10:08 AM, Teodor Spæren teodor.s...@hotmail.com wrote:
Hello!
I am trying to install gentoo on an old armada m700. The specs that I
think is relevant for this problem is the clocking speed of
Sure, but wouldn't compression make write operations slower? And isn't he
looking for performance?
On Aug 14, 2012 1:14 PM, Pandu Poluan pa...@poluan.info wrote:
On Aug 14, 2012 11:42 PM, Helmut Jarausch jarau...@igpm.rwth-aachen.de
wrote:
On 08/14/2012 04:07:39 AM, Adam Carter wrote:
It would figure that some in the Linux community would consider a sub 1.0
release as the birthday of a project :). Start flame mail here:
Just a minor correction. It's CONFIG_DEVTMPFS not CONFIG_DEV_TMPFS :)
I just had a bit of a scare after updating to udev-181, but
all is well now, finally. (I hope :)
In addition to the separate /usr problem that has already
been discussed at length here, there are other important
changes
On Fri, Mar 02, 2012 at 01:03:55PM -0500, Tanstaafl wrote:
Also - would there be a way to get a running output (kind of like
tailing a log)?
watch -n1 ps aux | gawk '{ if ( \$3 1.0 ) { print } }'
it was luck
that I got through the upgrade last time.
So looks like I'll be getting a new motherboard.
Jason Weisberger
jbdu...@gmail.com
, 2012 at 1:10 AM, Michael Mol mike...@gmail.com wrote:
On Thu, Jan 5, 2012 at 12:57 AM, Jason Weisberger jbdu...@gmail.com wrote:
Well like i said earlier, it did work that way. The final test is doing it
in X with full drivers loaded again. Then i get to kick my 9800gt off a
cliff.
Well, keep
motherboard. If not,
it's probably my card. Whether it's the PCI-E slot or northbridge
taking a dump on the motherboard is irrelevant to me, I'll just get a
new board.
I'll know by the end of this week. I can update with which way it went.
--
Jason Weisberger
jbdu...@gmail.com
. And how could I test whether it was
the processor or RAM without any current replacement parts? What
tests usually show one over the other?
--
Jason Weisberger
jbdu...@gmail.com
I would instantly agree, but backing off the unlock and oc doesn't improve
the situation. I can try text console with the onboard graphics and see
what happens.
Yeah, it never occurred to me that even when i was in console compiling
stuff that i was using a 1280x1024 vesa or nouveau framebuffer each time.
That will be first thing when i get home.
On Jan 4, 2012 3:52 PM, Mark Knecht markkne...@gmail.com wrote:
On Wed, Jan 4, 2012 at 12:42 PM, Jason
Sorry for the delayed response on the result, but i decided to do a
makeopts -j1 while i was at it. Compile has been going on for two hours.
Shoot me :)
Oh yeah, I hear you on the head scratching, believe me.
Well so far on the built in card I have managed to compile chromium -j5,
which i couldn't do for the two weeks prior. Same build, so i know it
wasn't an upstream or ebuild problem. Damn.
Next step is to get X running again and do it one
that it's up and running, I'm recompiling chromium from inside
gnome 3 with -j5 and I'll report in tomorrow morning.
On Wed, Jan 4, 2012 at 8:52 PM, Dale rdalek1...@gmail.com wrote:
Jason Weisberger wrote:
Oh yeah, I hear you on the head scratching, believe me.
Well so far on the built in card I
Well like i said earlier, it did work that way. The final test is doing it
in X with full drivers loaded again. Then i get to kick my 9800gt off a
cliff.
Check to make sure the driver is compatible with your nv9x chipset. I'm
your xorg log it doesn't show that one as being supported.
On Jan 2, 2012 10:14 AM, . ivd...@gmail.com wrote:
Hi there!
I can't run Xorg with Nouveau.
I use gentoo-sources without proprietary BLOBs (gentoo-libre).
? Is there a piece of software I'm missing on
my system to enable the cancellation?
Thanks!
Jason Weisberger
--
Jason Weisberger
jbdu...@gmail.com
was done on the
ALSA or Pulseaudio level, so which driver(s) are being used for the
cards should be irrelevant. However, I could be wrong.
--
Jason Weisberger
jbdu...@gmail.com
How are you listening to the audio? Headphones, speakers, telephone?
I'm using speakers and an external usb microphone at the moment. As I
said, this same setup works perfectly in Windows 7. I'm sure that if I
were to connect a headset the issue would go away, but that still doesn't
explain
Can you hear yourself through the speakers when talking into the
microphone? If yes, that means you need to disable the loopback in
alsamixer.
Noise cancellation doesn't seem to work
at all.
Noise cancellation doesn't have anything to do with that. You're
thinking of echo cancellation.
Another option is to use a small USB sound device. My headphones came
with one, for example. They can be really nice for reducing electrical
noise in the capture channel, too.
They also occasionally crop up where you might not expect them. I
picked up an HP 'travel' USB hub some time back,
Still looks like loopback is active. Try to find a slider called
Capture in alsamixer and mute it. There might also be a setting called
input which can be set to i2c, i2s, mix, etc. Play with these. I had
the same problem with a Soundblaster Live 24-bit, and the problem was that
it was set
in there.
--
Jason Weisberger
jbdu...@gmail.com
Well I now have it all completely working and dumped my findings here:
http://en.gentoo-wiki.com/wiki/HOWTO_Gnome_3
Hopefully it helps the next person coming to Gnome 3 from a fresh install.
On Sat, Dec 3, 2011 at 12:10 PM, Jason Weisberger jbdu...@gmail.com wrote:
I was getting that error
with introspection in :3.
So I think I finally figured out all my problems, I'll get home
tonight after work and give it a try. Hopefully someone will Google
this list and find this helpful, if not confusing.
On Dec 3, 2011 10:50 AM, walt w41...@gmail.com wrote:
On 12/02/2011 07:37 PM, Jason Weisberger wrote
:
On 12/01/2011 06:13 PM, Jason Weisberger wrote:
From a fresh install, upgrading from Gnome 2.26, I'm trying to install
gnome 3.2.2, but getting nowhere fast.
I stopped using Gentoo back before slots became common, so maybe I'm
missing something as far as that goes.
jbdubbspc jbdubbs # emerge
-0500, Jason Weisberger wrote:
Removing pygobject didn't help that block for some reason Which
doesn't make sense And clutter isn't on my system.
Why would both of those packages be slotted as :2 if one isn't on my
system and I only have one instance of pygobject?
Run emerge
scheduled for merge)
(x11-themes/gnome-icon-theme-3.0.0::gentoo, installed) pulled in by
(no parents that aren't satisfied by other packages in this slot)
Insert hand in shape of gun up mouth, pull imaginary trigger (thumb)
On Fri, Dec 2, 2011 at 9:09 PM, Jason Weisberger jbdu...@gmail.com
introspection block so I can install it?
On Fri, Dec 2, 2011 at 10:15 PM, Jason Weisberger jbdu...@gmail.com wrote:
Ok, worked through some of it, but pretty badly.
pygobject:2 needs -introspection to be able to slot :2 and :3 on the same
system. Ok done. However gnome 3's fallback mode gnome
From a fresh install, upgrading from Gnome 2.26, I'm trying to install
gnome 3.2.2, but getting nowhere fast. I stopped using Gentoo back before
slots became common, so maybe I'm missing something as far as that goes.
Thanks in advance guys/gals!
Jason Weisberger
jbdubbspc jbdubbs # emerge -pv
Correction, Gnome 3.2.1
--
Jason Weisberger
jbdu...@gmail.com
I've had mine for a while now, so I wouldn't be surprised if 1.5 was the
correct voltage for your sticks. Double check the manufacturer's website to
be sure.
On Feb 28, 2011 2:06 AM, Dale rdalek1...@gmail.com wrote:
Jason Weisberger wrote:
I actually have 4 gigs of gskill DDR 3 1600 and from
I actually have 4 gigs of gskill DDR 3 1600 and from experience I can tell
you that the stock voltage on those chips is set too low. The company
actually recommends that you use 1.9 volts while most motherboards will
default to 1.5 or 1.6. Double check this however, because I know they were
As he said in the previous message, there are almost never changelogs for
microcode updates.
I do, however, have to disagree with *never* disabling microcode updates.
If I recall properly, the AMD Phenom II 720 was able to be unlocked to 4
cores via a misconfiguration that enabled it with ACC.
...@googlemail.com
wrote:
On Monday 17 January 2011 15:13:54 Jason Weisberger wrote:
As he said in the previous message, there are almost never changelogs for
microcode updates.
I do, however, have to disagree with *never* disabling microcode updates.
If I recall properly, the AMD Phenom II 720
I second that. Gentoo probably isn't working because you have a custom
pppoe networking configuration. The others are built with a standard dhcp
configuration. Wipe your custom stuff and all will be well.
On Dec 16, 2010 6:29 PM, Paul Hartman
Couple of things to note:
The geforce 210 is not even powerful enough to do 1080p blueray playback.
Might want to consider a minor upgrade if you are going to do anything
entertainment-wise on this system.
Consider doing the ddr 3 system for longevity. If you do end up getting the
ddr 2
I ran revdep-rebuild -library=mysql.so but this returned with no
problems :(
Try running revdep-rebuild without -library=mysql.so
I had problem a few weeks ago when I updated PHP and running
revdep-rebuild without any options fixed it.
Check out this, it should answer most of your questions...
http://www.gentoo.org/doc/en/gentoo-amd64-faq.xml#perfup
Hi,
My box is a working and fully configured Gentoo system, which is
uptodate.
For the sake of being able to address more RAM and for more
calculation power (mainly for
Hello,
We'll I've got a new samsung monitor 2333HD-1
that is verified 1920x1080.
Finally, I got it working on a dvi-d-2-dvi-d video cable
with no problems...(minimal xorg.conf) and ati-drivers.
OK, so I switch to a DVI-Don video card to HDMI
on the monitor and it comes in, but the
To enable SPF on outgoing mail all you have to do is create a SPF record
and put it in your /var/bind/domain.tld.hosts file, assuming your using
Bind.
That's all I did and when I send email to Google its says...
Received-SPF: pass (google.com: domain of ja...@jasoncarson.ca designates
helpful.
--
Jason Dusek
Linux User #510144 | http://counter.li.org/
have
the option to drop to a shell. I try to run `cryptsetup' and I
get the same error -- so maybe that's my problem? Would
different versions of `cryptsetup' be incompatible with
devices encrypted by older versions? That seems brittle and
dangerous to me.
--
Jason Dusek
Hey everyone,
This guy (http://forums.gentoo.org/viewtopic-t-806844.html#6097354) says
that -march=native and -march=core2 differ. Which one do I choose for my
Core i5 CPU?
Jason Carson wrote:
Hello everyone,
I am considering upgrading to a 64 bit CPU but haven't decided on what I
am going to buy. One of the motherboards I am looking at has a P55
chipset
so my question is will the P55 chipset work with Gentoo? If so where in
menuconfig do I configure
Jason Carson wrote:
Jason Carson wrote:
Hello everyone,
I am considering upgrading to a 64 bit CPU but haven't decided on what
I
am going to buy. One of the motherboards I am looking at has a P55
chipset
so my question is will the P55 chipset work with Gentoo? If so where
in
menuconfig
Hello everyone,
I am considering upgrading to a 64 bit CPU but haven't decided on what I
am going to buy. One of the motherboards I am looking at has a P55 chipset
so my question is will the P55 chipset work with Gentoo? If so where in
menuconfig do I configure this?
Thanks
On Sat, 13 Jun 2009 23:39:52 +0200, Sascha Hlusiak wrote:
How do you know how many processes are running? What does 'top' say
about CPU usage and load? Maybe dnetc has two threads, which can each
occupy a core, so you have still 4 threads that are running, in 3
processes. You still should get
I'm having a strange problem on my Q6600 that cropped up starting with
the 2.6.29 series of the kernel, and is still present in 2.6.30.
Essentially, at all times, I have four nice 19 processes running, which
for the sake of this post, we'll call dnetc. All four cores are
utilized. At this
Jason Carson schrieb:
Thanks for the clarification Norman :-)
ok, I removed net.wlan0 so it doesn't start up anymore. My computer
booted
up and all the services are working the way they should, however I am
having a problem getting hostapd to start. Here is the error I get when
I
tried
Jason Carson schrieb:
Jason Carson schrieb:
Thanks for the clarification Norman :-)
ok, I removed net.wlan0 so it doesn't start up anymore. My computer
booted
up and all the services are working the way they should, however I am
having a problem getting hostapd to start. Here is the error
Jason Carson schrieb:
Jason Carson schrieb:
Alright, I have done everything you have suggested but when hostapd
tries
to start I am getting this error...
penguin ~ # /etc/init.d/hostapd start
* Starting hostapd...
Configuration file: /etc/hostapd/hostapd.conf
Failed to set interface
On Tuesday 09 June 2009, Jason Carson wrote:
Greetings,
I am trying to setup a wireless access point using the atheros kernel
driver (Built into the kernel, not as a module). I am using
Vanilla-Sources 2.6.29.4. I need my wireless network card to start up in
master mode but for some reason
Jason Carson wrote:
Hey all,
I think I might know the problem. After doing some reading apparently
many
distrutions, including Gentoo, don't ship hostapd with support for the
nl80211 driver. I checked the Gentoo tarball and this is the case. I
tried
editing the defconfig file
Jason Carson schrieb:
Greetings,
I am trying to setup a wireless access point using the atheros kernel
driver (Built into the kernel, not as a module). I am using
Vanilla-Sources 2.6.29.4. I need my wireless network card to start up in
master mode but for some reason it is starting up
On 9 Jun 2009, at 08:15, Jason Carson wrote:
H, I tried emerging hostapd normally and I noticed this...
* Enabling Wi-Fi Protected Setup support
* Enabling drivers:
* HostAP driver enabled
* Wired driver enabled
* Prism54 driver enabled
* Madwifi driver enabled
* nl80211
On 9 Jun 2009, at 08:15, Jason Carson wrote:
H, I tried emerging hostapd normally and I noticed this...
* Enabling Wi-Fi Protected Setup support
* Enabling drivers:
* HostAP driver enabled
* Wired driver enabled
* Prism54 driver enabled
* Madwifi driver enabled
* nl80211
Jason Carson schrieb:
Hey Norman,
I tried changing my /etc/conf.d/net to what you suggested but it
resulted
in the following errors...
*Bringing up interface wlan0
* Configuring wireless network for wlan0
* Scanning for access points
*no access points found
* Failed
Greetings,
I am trying to setup a wireless access point using the atheros kernel
driver (Built into the kernel, not as a module). I am using
Vanilla-Sources 2.6.29.4. I need my wireless network card to start up in
master mode but for some reason it is starting up in managed mode.
When wlan0
Hey all,
I think I might know the problem. After doing some reading apparently many
distrutions, including Gentoo, don't ship hostapd with support for the
nl80211 driver. I checked the Gentoo tarball and this is the case. I tried
editing the defconfig file in hostapd.tar.gz (enabling
From what I see, update newuse deep world is NOT pulling it back in. That's
the bug.
On May 17, 2009 6:26 PM, Daniel Pielmeier daniel.pielme...@googlemail.com
wrote:
Daniel Iliev schrieb am 18.05.2009 00:16:
Hi,Would anybody, please, confirm the following behavior before I
file a report
You should have two different ethernet ports on that motherboard, the
primary one should use forcedeth, the secondary should use the new marvell
yukon phy driver, make sure those are compiled into your running kernel.
On Mar 18, 2009 2:41 PM, Neil Bothwick n...@digimed.co.uk wrote:
On Wed, 18
An interesting project that has come up is called Crossover Chromium, which
is a specially packaged version of Chrome and Wine, but yeah in the meantime
Konqueror does a pretty good job even if it does render slightly differently
on my system.
On Feb 14, 2009 11:11 PM, Joshua Murphy
Greetings,
I am trying to get Spamassassin working. I am following this guide...
http://www.hurring.com/scott/howto/postfix_spamd/
The configuration on that page is very minimalist and that's how I want to
start off. I can get progressively more complex as I learn more but I want
to keep it as
Greetings,
I am trying to get Spamassassin working. I am following this guide...
http://www.hurring.com/scott/howto/postfix_spamd/
The configuration on that page is very minimalist and that's how I want to
start off. I can get progressively more complex as I learn more but I want
to keep
On 12.01.2009 17:33, Jason Carson wrote:
[...]
I don't understand what this part below means...
Make sure you add these parameters to your dk-filter command line:
-b sv -d your-domain.com -H -s /etc/mail/dk-filter/default.private
-S default
I tried the following two commands with no luck
On 12.01.2009 00:13, Jason Carson wrote:
Greetings,
I am trying to setup postfix with domainkeys. I installed dk-milter and
ran the following as I was told to do after emerging it ...
DomainKeys is deprecated and is replaced by DKIM. You are much better
off using mail-filter/dkim-milter
On 12.01.2009 00:13, Jason Carson wrote:
Greetings,
I am trying to setup postfix with domainkeys. I installed dk-milter and
ran the following as I was told to do after emerging it ...
DomainKeys is deprecated and is replaced by DKIM. You are much better
off using mail-filter/dkim-milter
On 12.01.2009 17:33, Jason Carson wrote:
[...]
I don't understand what this part below means...
Make sure you add these parameters to your dk-filter command line:
-b sv -d your-domain.com -H -s /etc/mail/dk-filter/default.private
-S default
I tried the following two commands with no luck
Greetings,
I am trying to setup postfix with domainkeys. I installed dk-milter and
ran the following as I was told to do after emerging it ...
emerge --config mail-filter/dk-milter
...which told me to do the following...
Configuring pkg...
Enter the selector name (default penguin): default
*
mode
I think this problem may have to do with the fact I am using baselayout
2.0.0 but am not totally sure.
What does ioctl[SIOCSIWMODE]: invalid argument mean?
What does inactive mean?
Again, everything is working so this isn't a major problem but I would
still like to fix it.
Thanks
Jason
, everything is working so this isn't a major problem but I would
still like to fix it.
Thanks
Jason
I'm not sure if this will help but I did a little googleing for ya.
Look at the last post on this one.
http://www.gossamer-threads.com/lists/gentoo/user/169035
Hope that helps or some guru
I am following this guide to setup my wireless access point.
http://gentoo-wiki.com/Wireless/Access_point#Bridging_the_wired_.26_wireless_segments
I have my network up and running with WPA.
When I configured my kernel to use bridging (compiled into the kernel,
not
as a module) and
I am following this guide to setup my wireless access point.
http://gentoo-wiki.com/Wireless/Access_point#Bridging_the_wired_.26_wireless_segments
I have my network up and running with WPA.
When I configured my kernel to use bridging (compiled into the kernel, not
as a module) and rebooted I
I am following this guide to setup my wireless access point.
http://gentoo-wiki.com/Wireless/Access_point#Bridging_the_wired_.26_wireless_segments
I have my network up and running with WPA.
When I configured my kernel to use bridging (compiled into the kernel, not
as a module) and rebooted
show a wireless network to connect too.
What do I need is to know what to add to...
/etc/conf.d/net
and
/etc/wpa_supplicant/wpa_supplicant.conf
Thanks
Jason
--
gentoo-user@lists.gentoo.org mailing list
ok, I got it working without encryption. Here is what I did I configured
my kernel according to these webpages...
http://madwifi.org/wiki/Requirements
and
http://madwifi.org/wiki/UserDocs/KernelConfig
...then I configured my system as follows...
1)Add madwifi to USE flags
2)emerge
ok, I got it working without encryption. Here is what I did I configured
my kernel according to these webpages...
http://madwifi.org/wiki/Requirements
and
http://madwifi.org/wiki/UserDocs/KernelConfig
...then I configured my system as follows...
1)Add madwifi to USE flags
2)emerge
I have installed and configured my wirelss network with MadWifi and
wpa_supllicant. However it is unencrypted. What do I have to do to setup
WPA encryption? I have followed this
(http://gentoo-wiki.com/HOWTO_Building_a_Wireless_Access_Point#WPA_Encryption)
but when I run...
hostapd -dd
Jason Carson wrote:
SNIP
So what does this mean?
ioctl[unknown???]: Invalid argument
I can't get hostapd to startup until this is fixed.
No knowledge here but google may have found something.
http://madwifi.org/ticket/422
Hope that helps.
Dale
That looked promising
certainly don't need any help with verbosity, do you?
On Thu, Jul 3, 2008 at 10:46 AM, Erik Ohrnberger [EMAIL PROTECTED] wrote:
help
--
gentoo-user@lists.gentoo.org mailing list
On Wed, Jul 2, 2008 at 3:08 PM, Brian Johnson [EMAIL PROTECTED] wrote:
Jason,
That's totally weird. Couple things that could cause this -- try disabling
any composting window managers you may have running to see if that makes a
difference. Also, is your computer stressed out (100% cpu usage
On Wed, Jun 25, 2008 at 9:24 PM, Sebastian Wiesner [EMAIL PROTECTED]
wrote:
Chris Walters [EMAIL PROTECTED] at Wednesday 25 June 2008, 22:25:18
Are you a cryptology expert?
Are you then?
I doubt that either of you are cryptology experts. I've known a few, and I
am a crypto-expert, who
I've been reading this thread in the archives, on loop-aes and then the
security of AES. I hate to jump on the bandwagon, so before I do, I will
state that I *am* a crypto-expert, and have worked for the several
government entities in the US. I am not at liberty to tell you which ones.
Mr.
On Wed, Jun 25, 2008 at 9:51 PM, Chris Walters [EMAIL PROTECTED] wrote:
Alan McKinnon wrote:
Or perhaps you doubt that they can crack any keys at all...
Don't get smart with me, jackass.
Fuck off, shitehead. Call me a jackass, when I simply state facts you
admitted to? You're a
Help me stop this from happening please.
Nevermind. Apologies for the premature question. It appears that Openoffice
with needs Firefox 2.0.0.14- I just dropped the firefox use flag, as I don't
see that as necessary, necessarily.
Thanks
On Thu, Jun 19, 2008 at 1:01 PM, Jason Messerschmitt
[EMAIL PROTECTED] wrote:
Help me stop
Could you elaborate. What is xulrunner exactly?
On Thu, Jun 19, 2008 at 1:06 PM, [EMAIL PROTECTED] wrote:
On Thu, Jun 19, 2008 at 01:01:27PM -0500, Jason Messerschmitt wrote:
Help me stop this from happening please.
In my recent troubles with emerge -ev world, I had a similar problem
That's really nice to know. Thank you.
On Thu, Jun 19, 2008 at 3:14 PM, Daniel Pielmeier
[EMAIL PROTECTED] wrote:
Jason Messerschmitt schrieb:
Could you elaborate. What is xulrunner exactly?
On Thu, Jun 19, 2008 at 1:06 PM, [EMAIL PROTECTED] wrote:
On Thu, Jun 19, 2008 at 01:01:27PM
yes
On Thu, May 1, 2008 at 2:14 PM, [EMAIL PROTECTED] wrote:
I thought I remembered someway to compile a single module after the
fact that didn't involve recompiling everthing... but just now I
entered the usr/src/linux directory and edited .config adding the
sshfs FUSE module.
when I ran
be avioded- I'm not a mail man as it were.
-jason
On Fri, Apr 18, 2008 at 4:52 AM, Stroller [EMAIL PROTECTED]
wrote:
Hi there,
Sorry to be so long replying - I've been busy with work haven't been
reading the list. In case you're still having problems - and for the benefit
of teh Googles
to:[EMAIL PROTECTED] [EMAIL PROTECTED]
550 5.1.1 [EMAIL PROTECTED] User unknown
Thanks again. I'm not necessarily looking for someone to give me the answer,
as it were, but if I could get some help looking in the right direction I
would be very appreciative.
Best to you,
Jason
On Fri, Apr 11
I guess I'll dip my toes in here and admit that I can't figure this out.
Synopsis: I've setup Postfix to be a mail out only smtp server. I just want
it for our Joomla based web pages and our helpdesk to be able to mail to
users from the local server. The problem is this: I can mail to any domain
I'm not totally sure what you are talking about but to get perl to work
with apache2 you need to add -D PERL to /etc/conf.d/apache2
APACHE2_OPTS=-D PERL
Hi list:
The situation is the next, i'm trying to install mod_perl as a static
module with apache2, but apparently this isn't possible
Did you create a separate /boot partition when installing Gentoo. If so
you need to mount it
mount /dev/sda1 /boot
or whatever is your boot partition
Hi Guys,
Something weird is going on with my system. I have been trying to
upgrade the kernel, but no matter what I select, I can't seem to
Greetings,
Has anyone on the list got qmail to work with domainkeys, if so how?
Thanks
Jason
--
gentoo-user@lists.gentoo.org mailing list
I found this ( http://forums.gentoo.org/viewtopic-t-665798.html ) so I
will give that a try.
Greetings,
Has anyone on the list got qmail to work with domainkeys, if so how?
Thanks
Jason
--
gentoo-user@lists.gentoo.org mailing list
--
gentoo-user@lists.gentoo.org mailing list
try to push your external ip adress in your hosts file for your domain
My static IP is 66.11.182.5 and my computer is called
penguin.jasoncarson.ca so what exactly would I put in /etc/hosts?
On 3/17/08, Jason Carson [EMAIL PROTECTED] wrote:
Greetings,
When I send an email to myself
1 - 100 of 347 matches
Mail list logo