Hi,
Am Sonntag 13 September 2009 23:26:45 schrieb walt:
On 09/13/2009 12:32 PM, Sascha Hlusiak wrote:
Where are the global defaults anyway, if you want to change the order,
maybe? Where could you globally prefer acroread over evince and gedit
over xemacs?
Try running update-desktop
Hello List,
somehow all default file associations are broken in my gnome installation and
seem to point at the KDE applications instead.
When right-clicking in nautilus on a pdf file, the default action is
kghostview instead of evince (in kde the default is acroread) and the default
action
Am Sonntag 13 September 2009 20:02:09 schrieb Daniel Troeder:
On Sun, 2009-09-13 at 12:00 +0200, Sascha Hlusiak wrote:
Hello List,
somehow all default file associations are broken in my gnome
installation and seem to point at the KDE applications instead.
When right-clicking
Am Monday 29 June 2009 19:19:53 schrieb James:
/etc/exports is as follows:
/pxe/diskless/gentoo
*(sync,rw,no_root_squash,no_all_squash,no_subtree_check) /opt
*(sync,ro,no_root_squash,no_all_squash,no_subtree_check) /usr
Am Saturday 13 June 2009 07:46:34 schrieb Jason Lynch:
I'm having a strange problem on my Q6600 that cropped up starting with
the 2.6.29 series of the kernel, and is still present in 2.6.30.
Essentially, at all times, I have four nice 19 processes running, which
for the sake of this post,
Am Dienstag 05 Mai 2009 22:32:38 schrieb Steve:
I've a gentoo box sat behind a firewall - it runs a apache and sshd with
holes punched through NAT to allow remote access. It runs DHCP and DNS
services for my LAN.
I would like to run a second instance of apache on a fresh IP address -
to
Am Dienstag 05 Mai 2009 23:28:22 schrieb Steve:
Sascha Hlusiak wrote:
The easiest thing would probably be to just use ssh port forwarding
because you already have all the pieces running anyway. Wouldn't a simple
ssh -L 12345:secondapache:https u...@remotessh
and the browsing
Hi,
rpcbind: server 192.168.2.1 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 15/1 on 192.168.2.1
rpcbind: server 192.168.2.1 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using
Am Dienstag 17 März 2009 15:51:15 schrieb Andrew Gaydenko:
On Tuesday 17 March 2009 17:37:40 Nikos Chantziaras wrote:
Andrew Gaydenko wrote:
Hi!
Have bought a gamepad for my son - he plays supertuxkart (USB, Black
Warrior Patriot Vibration Gamepad), attached, added
Section
Hi list,
I have a server with two interfaces in the same subnet.
When asking for the MAC of one of the IPs, always both interfaces reply:
arping -b xx.xx.xx.xx
ARPING xx.xx.xx.xx from yy.yy.yy.yy eth0
Unicast reply from xx.xx.xx.xx [00:1D:7D:D7:6D:F3] 0.607ms
Unicast reply from xx.xx.xx.xx
Hi,
no, I'm not complaining about arping, which is run on the client (and has only
one NIC), but I complain about the server replying from both interfaces.
Sascha
Am Samstag 21 Februar 2009 22:14:52 schrieb Tomáš Krasničan:
Hi,
set the interface with -I parameter.
Sascha Hlusiak wrote
Am Thursday 01 January 2009 17:54:12 schrieb Neil Bothwick:
On Thu, 1 Jan 2009 11:26:27 -0500, Michael P. Soulier wrote:
Ignore what prompt? There was no prompt, a prompt requiring feedback is
in fact, exactly what I am looking for.
That would be wrong. Emerge is supposed to run
Pawel K schrieb:
Hello
I would like to get rid of all unnecessary x11-drivers/xf86-video-*
packages.
I do NOT want to migrate to "Modular X".
I set my video card in /etc/make.conf as follows:
VIDEO_CARDS="i810"
What should I do now. Just
[EMAIL PROTECTED] schrieb:
Paul Hartman [EMAIL PROTECTED] [08-10-09 20:31]:
On Thu, Oct 9, 2008 at 12:48 PM, [EMAIL PROTECTED] wrote:
Hi,
I am using a nvidia card for linux. Therefore I have to compile the
nvidia driver interface for each new vanilla kernel I want to
use.
After
Hi,
/bin/sh: line 1: 11645 Instruction illégale GEGL_DEBUG_TIME=yes
GEGL_SWAP=RAM GEGL_PATH=../../operations ../../bin/gegl
OpenRaster-01.xml -o$
make[5]: *** [OpenRaster-01.png] Erreur 132
...
and so on.
Have you any idea ?
Same issue for me, caused by bogus autodetection of mmx and sse
Crackpotkid schrieb:
make[2]: *** [baseBGBox.lo] Error 1
make[2]: *** Waiting for unfinished jobs
i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I.. -I..
-I/usr/include/gtk-2.0
-I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo
-I/usr/in
clude/pango-1.0
However, I don't know how to use the output of find cd-root -type f
-or -type l | xargs sha1sum -b to find duplicate files. Maybe someone
can donate a perl/python script to find duplicate files and list them?
find . -type f -print0 | xargs -0 -L 1 md5sum | sort | uniq -w 20 -D
- Sascha
Am Tuesday 16 September 2008 21:30:55 schrieb Norberto Bensa:
Quoting Tomáš Krasničan [EMAIL PROTECTED]:
Hi list,
Hi!
is it possible (if is how) to make freeBSD as xen domU on gentoo dom0?
Yes, but AFAIK, it will only run in full virtualization mode; just
like windows.
No, there are
Am Sonntag, den 14.09.2008, 12:03 +0200 schrieb Liviu Andronic:
Dear all,
===
Short version:
If you upgrade to xorg-x11-7.4, xorg-server-1.5 and
xf86-video-i810-2.4.2-r1, and X does not start, change Section
Device Driver i810 to intel in your xorg.conf. Would have been
nice if
So if you encrypt something for yourself, you'll need your public key
to encrypt and your public key to decrypt.
Little correction, you need the PRIVATE key to decrypt. Everybody has
the public key but since you don't want everybody to be able to decrypt,
it's done with the private key.
Am Dienstag 02 September 2008 23:16:50 schrieb Nikos Chantziaras:
Nicola wrote:
Alle martedì 2 settembre 2008, Nikos Chantziaras ha scritto:
I'm using Flash 10_beta20080811. All high-resolution content on YouTube
gives a We're sorry, this video is no longer available. error. Can
someone
Can anyone suggest how to revert to my xorg.conf configuration, and to
make left shift a proper modifier key, again? Thank you,
Liviu
The easiest way probably is to disable input hotplugging:
Put the following line in Section ServerFlags in the xorg.conf:
Option AutoAddDevices false
-
Am Dienstag 26 August 2008 20:06:57 schrieb Liviu Andronic:
Thank you a lot, Sascha.
On Tue, Aug 26, 2008 at 11:03 AM, Sascha Hlusiak [EMAIL PROTECTED]
wrote:
Put the following line in Section ServerFlags in the xorg.conf:
Option AutoAddDevices false
This worked like a charm. Would
Am Dienstag 26 August 2008 23:09:37 schrieb Liviu Andronic:
On Tue, Aug 26, 2008 at 8:15 PM, Sascha Hlusiak [EMAIL PROTECTED]
wrote:
This worked like a charm. Would another solution be to re-compile
xorg-server with -hal?
It would, but I find runtime-tuning much easier and transparent
Am Dienstag 08 Juli 2008 10:26:40 schrieb Joerg Schilling:
Arttu V. [EMAIL PROTECTED] wrote:
On 7/7/08, Joerg Schilling [EMAIL PROTECTED] wrote:
Let me quote _this_ file to verify that there is a 4 clause BSDL.
Jörg, there are indeed four asterisks/clauses to count. But which
clause
And before you tell me to look again or go read something or
whatever -- I did. I have the cdrkit source tarball right here, and I'm
looking at the files in question. I also have a copy of the GPL, which
says exactly this: plus the scripts used to control compilation and
installation
Am Dienstag 08 Juli 2008 16:12:43 schrieb Joerg Schilling:
Mike Edenfield [EMAIL PROTECTED] wrote:
The cdrtools tarball includes a file called Makefile in every
directory. The cdrkit includes a file called CMakeList.txt in every
directory. THAT FILE has a copyright and license terms
Am Montag 07 Juli 2008 17:30:06 schwätzte Joerg Schilling:
Sascha Hlusiak [EMAIL PROTECTED] wrote:
They claimed that the official build system was not legal but they
replaced it with a build system that definitely is not legal because it
is not included in the source.
Of course
Am Montag 07 Juli 2008 17:45:37 flamete Joerg Schilling:
Back to my statement: iirc the Debian people refused to establish a
whole new build chain to circumvent the problem, that they saw when
distributing cdrtools.
The original build system in cdrtools is not GPL but it is included in the
Heyho,
Click on License. It's also in the file Copyright.txt in
cmake-2.4.8.tar.gz, for example.
Let me quote _this_ file to verify that there is a 4 clause BSDL.
The fact that cmake may have been changed a few weeks ago does not matter.
At the time when Bloch and Co. did replace the
Am Montag 07 Juli 2008 21:04:15 schrieb Joerg Schilling:
Sascha Hlusiak [EMAIL PROTECTED] wrote:
Heyho,
...
a lot of new FUD
you. Feel free to prove us wrong.
I am sorry, but I cannot see any sense in talking to a person who uses
majestatis pluralis for his claims.
I does not make much
Am Sonntag 29 Juni 2008 13:05:24 schrieb Joerg Schilling:
Alan McKinnon [EMAIL PROTECTED] wrote:
Stroller wants to hear *your* point of view. As a token of respect for
all the users of your software (the original, not the fork) who are
here and reading this, could you please just describe
He wrote that he is pissed off...
If you quoted him correctly before, you'd know it was not meant as an
attack. He wrote [...] this latest thread just started to piss me off.
It's not about you, neither about your work. It's about this thread!
People have been extremely understanding
I'm using
Intel Corporation 82801I (ICH9 Family) HD Audio Controller
with the snd_hda_intel module shipped with the kernel.
I had some problems with the Intel HD Audio driver in Linux, maybe they are
related.
- Changing the Master volume in the mixer did not change anything. I could
only
Am Donnerstag 14 Februar 2008 07:12:48 schrieb Iain Buchanan:
Hi all,
When I unplug my usb mouse and keyboard for longer than a few seconds
(not sure of the exact time, but must be more than, say, 5 seconds) I
get a BUG message in dmesg. When I plug them back in, they don't work!
I just
Hi,
You have hal-0.5.10 installed and it's hotplugging devices. To disable
hotplugging, put
Option AutoAddDevices false
in Section ServerFlags. Or switch in X to an evdev keyboard layout, since it
overrides your xorg.conf settings.
Sascha
Am Samstag 19 Januar 2008 19:52:09 schrieb
Hello,
Am Mittwoch 16 Januar 2008 08:17:52 schrieb Michael Schmarck:
Hello again!
On Jan 15, 2008 6:45 PM, Sascha Hlusiak [EMAIL PROTECTED] wrote:
says which devices are evaluated and added. To keep it short, just
disable hotplugging in xorg by adding:
Option AutoAddDevices false
Am Mittwoch 16 Januar 2008 18:13:22 schrieb Alan McKinnon:
Hi all,
I haven't seen this one before. My touchpad mouse works normally, until
I lift my finger and place it somewhere else. Normally, the pointer
would stay where it is and only move when my finger moves. What happens
now is my I
Yesterday, I upgraded to xorg-server 1.4 from 1.3. I also recompiled
all the x11-drivers packages, including xf86-input-mouse-1.2.3.
Today, I started Xorg 1.4 for the 1st time. When I now single click
something, the system seems to get a double click. Examples:
I uploaded my Xorg.conf to
I think you have too many mice in your running X, there is
/dev/input/mice, which is supposed to gather all mouse data, as well as
/dev/psaux (which is included in /dev/input/mice, as far as I know).
You mean the Identifier Logitech LX7 and USB Maus, correct?
This used to work fine,
Am Donnerstag 03 Januar 2008 21:59:59 schrieb Vernon A. Fort:
We switched from a cisco router to using a gentoo box with mutiple nics
- all appears to be working very well. However, i ran into a major
problem when one of my PC's went nuts. It flooded the network with
unknown protocol which
Am Mittwoch 19 Dezember 2007 16:58:25 schrieb YoYo Siska:
Sascha Hlusiak wrote:
I have this too when using vmware and it seems that somehow just the
keymap screws up.
I run kcontrol, activate the keyboard layout switcher (with 2 languages
in it) and once it's activated I can deactivate
Am Mittwoch 19 Dezember 2007 10:27:28 schrieb Neil Bothwick:
On Wed, 19 Dec 2007 14:56:12 +0930, Iain Buchanan wrote:
the only thing i can think of that might affect this is vmware or vnc.
i'm using both a lot at the moment, so perhaps something to do with the
keyboard grabbing is affecting
What I was wondering is if there is some sort of firefox setting I can
change to disable that function?
about:config and mousewheel.horizscroll.withnokey.action (play around
with it, one value is actually for horizontal scrolling)
- Sascha
signature.asc
Description: OpenPGP digital
01:00.0 VGA compatible controller: ATI Technologies Inc RV410 [Radeon
X700 Pro (PCIE)]
01:00.1 Display controller: ATI Technologies Inc RV410 [Radeon X700
Pro (PCIE)] Secondary
Section Device
Identifier ATI Technologies Radeon X700 Pro (RV410)
Driver fglrx
Option EnableMonitor tmds1
Am Donnerstag 16 August 2007 20:56:07 schrieb Herbert Laubner:
I still having a problem to shut down Xorg.
Independent if I am root or member of group user, as soon as I want
to end the xorg-server this one freezes.
As a side effect, the system-shutdown freezes as well.
Tell us more info
emerge -pv xorg-server shows:
VIDEO_CARDS=vesa%* -apm% -ark% -chips% -cirrus% -cyrix%
-dummy% -epson% -fbdev% -fglrx% -glint% -i128% -i740% -i810%
(-impact) -imstt% -mach64% -mga% -neomagic% (-newport) -nsc%
-nv% -nvidia% -r128% -radeon% -rendition% -s3% -s3virge%
-savage% -siliconmotion%
$ make modules
Please use just make in 2.6.x kernels. Should work then.
Greetings,
Sascha
signature.asc
Description: This is a digitally signed message part.
$ modprobe -v bridge
insmod /lib/modules/2.6.20-gentoo-r8/kernel/net/bridge/bridge.ko
FATAL: Error inserting bridge
(/lib/modules/2.6.20-gentoo-r8/kernel/net/bridge/bridge.ko): Unknown symbol
in module, or unknown parameter (see dmesg)
$ dmesg
bridge: Unknown symbol br_handle_frame_hook
Randy Barlow schrieb:
Howdy all! I'm having a tough time getting DHCP to work on my wireless card.
It's the intel 2200, and I am using wpa_supplicant with it. The contents of
my /etc/conf.d/net are:
modules=( wpa_supplicant )
config_eth1=( dhcp )
wpa_supplicant_eth1=-Dwext
The
and why I'm getting an IPv6 address? Thanks!
Every link that is up gets a link-local ipv6 address which is used to
find and communicate with direct link partners. It probably starts with
fe80::. So don't worry, that's caused by the ipv6 module and you don't
get it, you basically just have
I really like the copy/paste functionality you find in the Linux console
and in PuTTY where you just highlight the text you want to copy and when
you release the mouse button, it is copied. Then, you can just right click
to paste it into the input line.
How would I engineer such
Dhcpcd has an option for that, i believe it's -R. for example, on this
diskless router the dhcpcd on eth1 can't rewrite resolv.conf or the
netboot will fail:
FROM conf.d/net:
|
| config_eth1=(dhcp)
| dhcpcd_eth1=(-R)
However, you may need to find some way to get that
I heard of that using emerge --sync frequently may hert my hard-disk,
so I don't have a try --sync quite often(maybe once a month), but how can
I know whether I really need a sync and upgrade my system if a new kernel
or glibc is realised? Is there a simple and quick method?
You could
pppd complains: ppp not replacing existing default route...
(Isn't is possible to have multiple default routes with different metric
values? Why not with pppd? How can I make pppd add another default route or
replacing the current one?)
So the solution is by hand:
route -n # to see the
Is it possible to set things up so that...
- when only eth0 is active, everything routes via 192.168.123.254
- when both eth0 and ppp0 are active, my little LAN on 192.168.123.248/29
(aka netmask 255.255.255.248) routes via 192.168.123.254 and everything
else routes through ppp0?
What
One suggests using -O3 -pipe, the other, -O2 without
the pipe.
How much difference does this make? Is the extra level
of optimization with pipe the equivalent of the lower
level without?
From the gcc manpage:
-pipe
Use pipes rather than temporary files for communication between the various
If you installed a program that you no longer need, you can do a emerge
-C package name and it will remove it for you. The -C is the same as
--clean by the way.
Nope, -C is the short for --unmerge. -c would be --clean.
And --clean cleans a package, that means when you have two versions of a
I want now, on this local machine, that everybody, who can login, is in
another group, maybe audio. I can add certain ldap users to the
/etc/group file, which is respected. So my ldap user is in the local
wheel group, too.
If every user that logs in gets the same GID (domain users), you
Hi group,
I administrate a gentoo box, that authenticates with ldap.
Authentication works fine, and the ldap server is giving my user an uid
and one gid : 1000(Domain Users) in my case. I have NO access to the
ldap server.
I want now, on this local machine, that everybody, who can login, is in
What would you guys suggest in terms of specs for a server, serving
say 50 odd thin clients?
Probably 2P Opteron with 2 GB to 8 GB main memory. Cpus around 2 GHz.
You'll have to calculate the memory needs of each client plus the server's
running
overhead, and get enough memory to avoid
Hi,
hello all,
Since my last emerge -uD world (where man was updated to man-1.6), I
receive a segmentation fault when trying to see a man page, this seems
to be true for all users and within bash as well as zsh. I remember that
the conf file has been modified but I'm afraid i did not care to
Browsing through /usr/portage/app-emulation, I see dosemu and wine and
a whole bunch of others. Are dosemu and wine the ones to use, or are
some of the others (which I have no clue about) preferred?
I made good experience using dosbox to run old dos games. I don't know,
if Win 3.11 will run
63 matches
Mail list logo
