On 4/4/20 4:17 PM, Gareth Evans via Hampshire wrote:
Some potential things to check here too
https://www.raspberrypi.org/forums/viewtopic.php?t=71520
Thanks John & Gareth.
Sorry, I should have said that I had tried this advice in this post and
actually freed up some space. However, when I
Hello Folks.
Its been many years since I have posted to this list. (i wonder if Hugo
is still around). I do however still subscribe and follow the threads
with interest from far off Alabama. Keep up the good work and stay safe.
I have a quick question. My rpi is giving me root is full errors
Hello Folks.
I have just down what I think was a successful upgrade to jessie but
lsb_release -a is still reporting a squeeze system. What might I be
missing please?
TIA
Mike
--
Please post to: Hampshire@mailman.lug.org.uk
Web Interface: https://mailman.lug.org.uk/mailman/listinfo/hampshire
On 12/18/15 3:30 PM, Lisi wrote:
On Friday 18 December 2015 20:13:44 Mike Burrows wrote:
Hello Folks.
I have just down what I think was a successful upgrade to jessie but
lsb_release -a is still reporting a squeeze system. What might I be
missing please?
Did you go straight from Squeeze
Hi Folks.
I have uncommeted and changed the port line in ssh_config to port =,
ie changed from 22. Or so i thought. However, when i try and remote in using
ssh -p pi@ the connection is refused but when i leave
out the -p it works.
what am i missing please?
btw, if any of the
On 9/9/15 11:02 AM, Steve Miller wrote:
> port line in ssh_config
That's the config file for ssh, the client. If you want to change the
port that the server is running on you need to make the change in
sshd_config.
Cheers, Steve
--- Original Message
I knew that, not!
Thanks
Hello Folks.
Not sure how i did it but instead of upgrading a Debian package i
managed to remove virtually every package that was installed and now am
back to shell and x wont start. Anyhow before I tackle that, I need
networking and though i have statically configured eth0 all i can ping
is
Hello Folks.
I am managing a network which is setup with several wireless W7 clients
connecting via a Netgear R6300 to an XP Pro hosted share as well as one
W7 wired client.
The wireless clients can see the XP Pro machine in their network
window and can map to a shared folder and work just
I am managing a network which is setup with several wireless W7
clients connecting via a Netgear R6300 to an XP Pro hosted share
as well as one W7 wired client.
The wireless clients can see the XP Pro machine in their network
window and can map to a shared folder and work
On 10/26/13, 7:07 PM, Leo wrote:
Perhaps I should also have added this problem occurs before X starts.
I.e. the first time I connected the TV I could see the boot process
messages on it. However, now even those don't show up.
Certainly not wishing to insult your intelligence but have you
Hello Folks.
Putting together a Squeeze box and trying to configure iplayer. I have
it apparently streaming in that embedded content is loading but the
'loading...' message isnt clearing and no sound is coming out.
The flash-player download is producing a file association problem with
On 10/26/2013 10:18 AM, Chris Liddell wrote:
Possibly pointing out the obvious, but did you restart the browser after
flash installed? I always seem to forget that myself!
Chris
:) Yep ( actually rebooted the box :$ )
Mike
--
Please post to: Hampshire@mailman.lug.org.uk
Web Interface:
Some stuff here might be useful: https://wiki.debian.org/FlashPlayer
Possibly see if you can force a reinstall with the
update-flashplugin-nonfree utility? Maybe without the browser
running Chris
Thanks Chris. Could you please post the command line code for aptitude
please? I couldn't find
I just did (as root):
apt-get install flashplugin-nonfree
That did it :)
Thanks for all the help
Mike
--
Please post to: Hampshire@mailman.lug.org.uk
Web Interface: https://mailman.lug.org.uk/mailman/listinfo/hampshire
LUG URL: http://www.hantslug.org.uk
Hello Folks.
Does anybody know of a solution to recording say a webinar and then
playing it back time-delayed while the broadcast is still running? Much
like we do with regular TV using our DVR's.
TIA
Mike
--
Please post to: Hampshire@mailman.lug.org.uk
Web Interface:
Hello Folks.
I have a satisfactory video stream running on a somewhat under powered
squeeze box, with v4l taking its input from the installed Hauppauge
card. However, I cannot get the audio to stream. Does anybody know where
VLC gets its audio from when streaming video please? In other words,
On 10/19/12 9:48 AM, Vic wrote:
Hi All.
I've got a network problem I don't know how to solve. Hopefully, one of
the gurus here knows the answer...
I've got two network interfaces (one is actually virtual, but I don't
think that matters). I want to have two IP addresses (one on each i/f),
and
Hi Folks.
Went ahead a did an upgrade on my lenny box ignoring the dire warning
about udev and an incompatible kernel. Needless to say the system will
now not boot past udevadm.
Is there anything i can do to roll back to my earlier version please?
Done a spot of googling but cant really
[snip]
Make sure you understand what you are doing next time, and do not
blindly follow instructions you find on Google.
Is there anything i can do to roll back to my earlier version
please? Done a spot of googling but cant really find a way to go
back to my previous udev.
Is there anything i can do to roll back to my earlier version please?
Restore from the backup you made before upgrading? [:-)]
Hi Keith I didn't backup the system because I was only using the box as
a file server and I have the files duplicated elsewhere.
Correct me if I am wrong, I do
yes.
Please post your configuration file here, plus the output of...
id ftp
ps -ef | grep [v]sftpd
ls -la /home/ftp
Without that information we are just guessing.
Anonymous users should be chrooted into the home directory of the 'ftp'
user.
for more information you can also set these
The owner or group ID of vsftp must be writeable to that folder, doesn't
have to be 666/777, but say vsftp user is vsftp and group is vsftp, just
make the folder writeable to that group, chown :vsftp /home/ftp; chmod
g+w /home/ftp Either UID or GID writable will work, but if the folder is
As an addition the anonymous user cant download files, regardless of the
/home/ftp folder permissions. :(
The owner or group ID of vsftp must be writeable to that folder, doesn't have
to be 666/777, but say vsftp user is vsftp and group is vsftp, just make the
folder writeable to that group,
The owner or group ID of vsftp must be writeable to that folder,
doesn't have
to be 666/777, but say vsftp user is vsftp and group is vsftp, just
make the
folder writeable to that group, chown :vsftp /home/ftp; chmod g+w
/home/ftp
Either UID or GID writable will work, but if the folder is
Hi Folks.
I am messing with the above on my home Ubuntu Hardy Server. When I first
set up the ftp server I could login anonymously but could not upload.
Makes sense as the permissions on the default /home/ftp directory have
to be changed. So per the advice chmodded them to 777. But then when
Hello folks.
I am connecting to the LAN at work from my macbook. When I open a
terminal i get this message:
Last login: Tue Jul 5 09:19:23 on ttys000
johnrs-ipad:~ testermike$
We do have a John R at work and he does have an ipad. However I can't
understand why its reporting my macbook as
.
Benjie.
On 5 July 2011 15:28, Mike Burrows testerm...@knology.net
mailto:testerm...@knology.net wrote:
Hello folks.
I am connecting to the LAN at work from my macbook. When I open a
terminal i get this message:
Last login: Tue Jul 5 09:19:23 on ttys000
johnrs-ipad
after all that, I think the problem was I embarrassingly forgot to
restart the daemon :)
Thanks again to all.
Mike
--
Please post to: Hampshire@mailman.lug.org.uk
Web Interface: https://mailman.lug.org.uk/mailman/listinfo/hampshire
LUG URL: http://www.hantslug.org.uk
Hi Mike, you've got some useful stuff to try from others in the thread.
When you're changing sshd_config you're restarting sshd afterwards?
From an Internet-based Linux host, does nc some.dyndns.org
http://some.dyndns.org produce an openssh banner?
My next steps would be ssh -v on
However, when i change the port to (changing the router of course)
and repeat using
ssh -p testerm...@some.dyndns.org
I get an error that the connection was reset by peer and I cannot ssh in.
What am I not doing please?
If you haven't solved it yet, try running the ssh client with
Hi folks.
I can ssh into my debian machine on port 22 (with that port forwarded on
my router) using
ssh testerm...@some.dyndns.org
However, when i change the port to (changing the router of course)
and repeat using
ssh -p testerm...@some.dyndns.org
I get an error that the
On 6/17/11 2:04 AM, Vic wrote:
what am i missing about static v's DHCP?
There's really only one way to find that out - you have to capture some
packets...
Vic.
actually what i meant was, I thought that DHCP just gave out the IP
addresses for its client computers. I guess I hadn't thought
I've seen something similar in the past. Some routers simply don't NAT
packets for addresses they haven't handed out via DHCP. I guess it's some
sort of half-arsed attempt at security by the router manufacturer, but
I've yet to see such behaviour fix more problems than it creates...
I suppose
Hi Folks.
Connecting a Mac Book to my home wireless network. The IPs of all the
clients are static and the ISP DNS Servers are configured in all the
right places. However... a select few websites will not load unless
DHCP is enabled (for the LAN) on the router just downstream of the cable
Hello Rob.
I have a Linksys wrt 54 and wap54 acting in the mode i think you are trying
However, and I believe this may be crucial, I have not found anywhere
how to set this up on its own. For example, with it configured, I
would guess I need to unplug it, relocate it such it's equidistant
Hi Folks.
I have Installed the subject software on a Dell Power Edge the fell off
the back...
I have set it up as a RAID 1. However, Grub cant support the older video
card (at least I think thats the issue) and despite trying to get into
grub on boot and change some settings (per some google
I think the mount options are typically user,noauto so it doesn't auto mount
until requested but when it is requested the user who mounts it owns it and
can mount/umount it in the first place.
On a modern Debian system with a full-fat desktop I think this is
automatically taken care for you.
On 3/23/2011 10:04 AM, bryan hunt wrote:
On Wed, 2011-03-23 at 09:46 -0500, Mike Burrows wrote:
Hi Folks.
I have a western digital hard drive attached to a usb port on my deb
box. It mounts automagically on boot and I can access the file structure
and read/write files from a windows samba
Hi Folks.
I have a western digital hard drive attached to a usb port on my deb
box. It mounts automagically on boot and I can access the file structure
and read/write files from a windows samba client. However, when working
on the Deb box I found the non-root users only had read permissions.
Whoa!! That was absolutely fantastic to see!! I was expecting one
light (I just assumed they'd be docked)... not two chasing each other
across the sky :-)
--
there was one time last year I think when the shuttle undocked just
ahead of the ATV I think it was, coming up for its first docking or
On 3/3/2011 11:50 AM, Jim Kissel wrote:
Mike Burrows wrote:
Hello Folks.
If I may hi-jack the list for a personal cause. I am between
opportunities here in sunny Alabama and would just like advertise my
availability to any of the companies that are represented by list
members, that have
On 3/3/2011 1:14 PM, Daniel Llewellyn wrote:
On Thu, Mar 3, 2011 at 19:13, Jim Kisselj...@osml.eu wrote:
Whatever you do, don't wear a loud shirt in a built-up area. I did once,
but I think I got away.
loud-speakers in a shirt, now there's a good idea! *wanders off
listening to loud music
Hello Folks.
Had some success with live streaming and thanks for the posts last year.
However, have hit a problem with VLC and icecast2. I currently have
icecast2 installed and running on an ubuntu server with a VLC client
running on a Lenny box on the same network. I can play an mp3 on the
Hi folks.
I am messing with icecast2 and vlc and it would seem the shout module is
not installed. Can anybody provide any help on how to install this
module. So far the only reference i can find about this is at
http://en.flossmanuals.net/VLC/print
and all it says is:
The important part of
Sorry for the random pot - haven't seen much for a day or two and wanted
to check I haven't messed up my account
Happy New Year all.
Mike
--
Please post to: Hampshire@mailman.lug.org.uk
Web Interface: https://mailman.lug.org.uk/mailman/listinfo/hampshire
LUG URL: http://www.hantslug.org.uk
Hi Folks.
Switched e-mail accounts so resending this one.
Thanks for all the posts so far on live streaming. I currently have icecast2
installed and
running on an ubuntu server with a VLC client running on a Lenny box on
the same network. I can play an mp3 on the lenny box using VLC but as
On 9/22/10 6:10 AM, Vic wrote:
keeping off the raid plan atm.
I would recommend you return to it once you initial problems are resolved.
Have a more basic problem.although I can
ping the server I cannot log onto the share. it is on the same subnet as
the aforementioned home file server and
Hi Ben.
I live overseas so can't help physically but I remember my early days
with Debian (ask Hugo :) Keep plugging away its worth it in then end.
You have my moral support anyway. Great help Huh?
Kind regards
Mike
Hi,
If anyone is willing then I could do with some help. Our version of
oops sorry about the top post :(
--
Please post to: Hampshire@mailman.lug.org.uk
Web Interface: https://mailman.lug.org.uk/mailman/listinfo/hampshire
LUG URL: http://www.hantslug.org.uk
--
Hi folks, long time no post.
I was fiddling around last night and some how managed to reassign sound mute
to the m key. Don't know how I did it and have tried some of the Google
solutions which don't work.
Running kde on a sarge box.
Any thoughts please on how to toggle off mute?
TIA
Mike
--
Hi folks.
still fussing with camserv. still can't get the app to start:
testerm...@marvin:~$ /etc/init.d/camserv start
Starting camserv: camserv.
testerm...@marvin:~$ start-stop-daemon: Unable to set gid to 44
(Operation not permitted)
testerm...@marvin:~$
I have changed the ownership of
Try running /etc/init.d/camserv to see if it offers up any startup
options or falls over with a meaningful error.
Failing that, try setting debug options in the camserv.cfg file, if they
are available, re-run it and check the logs.
Note the executable in /usr/bin too - worth firing that
If that's a long post, I'd hate to see a short one!
Was going to include the whole of my camserv.cfg file but didn't :)
Might have to tho'. Still can't get it to work.
Cheers
Mike
--
Please post to: Hampshire@mailman.lug.org.uk
Web Interface:
Hi there all.
I am following the instructions on the wiki page concerning this app. I
have run camserv /etc/camserv/camserv.cfg as root but dont see it
showing as a process. I may have a couple of issues but my first
question is:
Should it appear after typing ps -aux?
needless to say
testerm...@marvin:/dev$ xawtv
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.18-4-486)
can't open /dev/video0: No such file or directory
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: No such file or directory
v4l2: open /dev/video0: No such file or
However, trying to view the output with xawtv gave an error. Googling
turned up this gem;
# xawtv -nodga -device /dev/video0
This may all be total twaddle and useless to you - but it may just help
you piece something together. If you have something already working (the
BT878) then you
Building modules outside the kernel can be fraught with problems
though...
Adrian
Think the required module went in ok:
testerm...@marvin:/$ lsmod
Module Size Used by
quickcam_messenger 12420 0
usbvideo 24324 1 quickcam_messenger
bt878
Hello folks,
Trying to install the quickcam.ko module on a etch system:
marvin:/home/testermike# insmod /usr/local/src/qc-usb-0.6.5/quickcam.ko
insmod: error inserting '/usr/local/src/qc-usb-0.6.5/quickcam.ko': -1
Invalid module format
marvin:/home/testermike#
want to use a quick cam express
Hello Folks.
Before I waste a bunch more time can I ask...is it possible to repair
DHCP, DNS and maybe other bits of XP home without reinstalling the whole OS?
I have 2 laptops connected to the same wireless secured Linksys network.
Both have their TCP/IP settings identical yet one can ping the
I should add the working one will happily grab an IP from the router whereas
the non-working one wont.
Mike
_
From: hampshire-boun...@mailman.lug.org.uk
[mailto:hampshire-boun...@mailman.lug.org.uk] On Behalf Of Mike Burrows
Sent: Saturday, December 20, 2008 9:48 AM
To: Hampshire LUG
Mike Burrows wrote:
Hello Folks.
Before I waste a bunch more time can I ask...is it possible to repair
DHCP, DNS and maybe other bits of XP home without reinstalling the
whole OS? I have 2 laptops connected to the same wireless secured
Linksys network. Both have their TCP/IP settings
61 matches
Mail list logo
