Liz,
Since you are doing this within a REXX why not issue a LISTC command on the
DSN first with the VOL parameter and see if the VOLSER is MIGRAT before you
issue the HLIST command? That way you know the dataset is truly migrated.
Dennis
-Original Message-
From: IBM Mainframe
We've been using a TS7720 for 3 years now but we are NOT in a grid which makes
for some interesting operational procedures. The virtual volumes are
copied/stacked to physical volumes using TAPECOPY from OPENTECH which works
just fine. Our only problem so far is restoring the data for HSM ML2
John,
Checkout SHOWMVS. It makes a subsys call to SMS to do just that.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
McKown, John
Sent: Thursday, February 09, 2012 8:13 AM
To: IBM-MAIN@bama.ua.edu
Subject: Getting the Storage
Why would you be DUMPing TAPE? Your INDD statements refer to TAPExx instead of
DSYSxxx statements.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
John Dawes
Sent: Monday, January 16, 2012 6:43 AM
To: IBM-MAIN@bama.ua.edu
Subject:
Well the TS7720 holds up to 1772TB according to the doco. Check out
http://www-03.ibm.com/systems/storage/tape/ts7700/index.html for details.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Henke, George
Sent: Friday, December 16, 2011
We've been running that way for years.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Betsy Jeffery
Sent: Monday, November 28, 2011 9:02 AM
To: IBM-MAIN@bama.ua.edu
Subject: JES2 JOBCLASS(TSU)
Can the SWA for TSU jobclass be 'ABOVE'? I
That's because you issued the $TA commands for a time earlier than the
current time. WAD according to the JES2 Commands manual. Add 24 hours to your
T= time and it will execute immediately and then at the scheduled time you
expect.
/*$ T A0015,T=34.00,I=86400,'$VS,''S SENDSMF'''
/*$ T
] On Behalf Of
Vernooij, CP - SPLXM
Sent: Tuesday, October 04, 2011 2:16 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Scheduling Tasks via JES2 automatic commands
No, they will not execute immediately, only on the specified time
starting the next day.
Kees.
Dennis Trojak dennis.tro...@radioshack.com
Which is entirely correct since XMSPL4 is included in each job shown if you
look. JES2 will spread the output for an individual job among spool volumes
unless you are using fencing.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Have you tried it with a FILTER OWNER EQ racfid ? The filter only
applies to the screen you are on.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of McKown, John
Sent: Monday, July 25, 2011 1:38 PM
To: IBM-MAIN@bama.ua.edu
Subject:
Try:
$DJOBQ,SPOOL=(PERCENT0,VOLUME=jesv01)
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Staller, Allan
Sent: Friday, July 22, 2011 8:02 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: JES2 Commands
I have the percentage and I know the volume
They show in OPSLOG on our system.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of John McKown
Sent: Thursday, June 23, 2011 3:32 PM
To: IBM-MAIN@bama.ua.edu
Subject: CA-OPS MVS question
We start CA-OPS/MVS at IPL with the
If this is the complete output then it never found any XXA47467.**
datasets that were successfully processed to backup.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of jagadishan perumal
Sent: Wednesday, June 22, 2011 5:50 AM
To:
Ken,
Console command D CF,CFNAME=xx to see total defined structures and
free space within your CF.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Ken Hynes
Sent: Thursday, June 16, 2011 10:33 AM
To: IBM-MAIN@bama.ua.edu
Subject: XCF
be a good requirement for IBM to supply a command a utility
to perform this against a logstream.
Best Regards, Sam
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Dennis Trojak
Sent: Tuesday, March 22, 2011 3:15 PM
To: IBM-MAIN@bama.ua.edu
[mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Dennis Trojak
Sent: Tuesday, March 22, 2011 3:15 PM
To: IBM-MAIN@bama.ua.edu
Subject: Logstream Offload
I've got a logstream dataset from RRS allocated on a volume that I want
to take offline. IBM tells me the only way to release the allocation is
to stop RRS
I've got a logstream dataset from RRS allocated on a volume that I want
to take offline. IBM tells me the only way to release the allocation is
to stop RRS or write a program to issue the IXGOFFLD to force a switch
to a new dataset. Since I sure can't stop RRS in a 24*7 production
environment does
John,
We use the symbolic relate with systems symbols and then just use
SYMUPDTE to change the symbols as needed w/o IPL on each system.
DEFINE ALIAS (NAME(SYS5.DB2.DBP0.SDSNEXIT) -
SYMBOLICRELATE(SYS5.DB2.DBPRL..DBPSS..DBPLV..SDSNEXIT) )
Dennis
-Original
Are you sure you don't have a filter on the P.3.4 screen for SYS1 in the Dsname
Level?
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of
af dc
Sent: Monday, January 03, 2011 11:46 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: DASD %USAGE
So APPLY UA51215 with a bypass and do the local fix #2 as documented
in OA34586.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Richards, Robert B.
Sent: Tuesday, December 21, 2010 9:34 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: z/OS
] On
Behalf Of Dennis Trojak
Sent: Tuesday, December 21, 2010 10:44 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: z/OS 1.12 coexistence ptfs
So APPLY UA51215 with a bypass and do the local fix #2 as documented
in OA34586.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m
Have you got the right PARMLIB? No EDGRMM00 member in the SYS1.PARMLIB
supplied by IBM. PARMLIB concatenation error maybe?
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Mark Pace
Sent: Tuesday, November 16, 2010 2:08 PM
To:
So if you only want a single SYS1.PARMLIB then point to the correct
location in the Mastercat of each system. The VOLSER specified in LOADxx
is for an additional SYS1.PARMLIB to be concatenated since it will
always include SYS1.PARMLIB, as cataloged in the Master Catalog, is
added at the end of
So put each on your SYSRES volume and use the '**' indicator so that
it gets resolved to the correct IPL volume.
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Neal Eckhardt
Sent: Friday, October 08, 2010 3:04 PM
To:
Walt,
We've been using the MLPA at DR IPL for many years for the same reason
and it definitely works. No SYSRACF DD statement and no operator prompt.
Doco for the BLDL states it will search LPA before the LNKLST.
Dennis
-Original Message-
From: IBM Mainframe Discussion List
Enter VL on the volume display for RMM and it will list the volume
chain.
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of MONTERO ROMERO, ENRIQUE ELOI
Sent: Friday, March 05, 2010 6:45 AM
To: IBM-MAIN@bama.ua.edu
Subject: RMM Multi-Volume
Maybe someone on the list can help since IBM is going around in circles
trying to identify where my problem is.
I am trying to run an IBM supplied JAVA script for a z/OS product
installation from a TELNET session in my Windows DOS command screen. It
cannot be run from ISHELL or OMVS. When I TELNET
Check out the TAPEUTILIZATION command option in HSM. You can use the
CAPACITYMODE option or depending on how back-level your HSM is you can
set percentfull to +100%. We used to use 1090 for our pseudo 3490's.
Dennis
-Original Message-
From: IBM Mainframe Discussion List
Yes. I can't get to IBMLink or any z/OS related pages either on I/E.
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Thompson, Steve
Sent: Wednesday, December 30, 2009 8:37 AM
To: IBM-MAIN@bama.ua.edu
Subject: z/OS Online Library --
You get allocation error message IKJ56228I and JES2 continues on its
merry way. No responses necessary.
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Patrick Lyon
Sent: Monday, November 23, 2009 11:56 AM
To: IBM-MAIN@bama.ua.edu
Our network people kept talking switch-id but in decimal. HCD needed
hex. When we got that straightened out it finally came online.
Also port-id in HCD is across entire switch not just the port on a
specific card in the switch.
Dennis
-Original Message-
From: IBM Mainframe Discussion List
SUPPRESS means it will not be displayed on the console. You need a
product like Liz mentioned or an MPFEXIT to keep it from the SYSLOG
which is what SDSF is displaying.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Lizette Koehler
Sure, uses any column from 1-71 and symbols too if needed.
LNKLST ADD NAME(LNKLSTPD)
DSN(SYS5.DB2.DBPRL..DBPSS..DBPLV..SDSNLINK)
LNKLST ADD NAME(LNKLSTPD)
DSN(SYS5.DB2.DBPRL..DBPSS..DBPLV..SDSNEXIT)
Dave,
My Hitachi guy told me to ignore WLMPAV when we installed our USP-V and
it is set to NO in my IODF.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Dave Kopischke
Sent: Friday, June 19, 2009 1:33 PM
To: IBM-MAIN@bama.ua.edu
Did you ever get around this hurdle? We wanted to try moving from MIM to
GRS also.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Vernooy, C.P. - SPLXM
Sent: Tuesday, June 02, 2009 6:21 AM
To: IBM-MAIN@bama.ua.edu
Subject: MIM -
http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/DZ9AR004/CCON
TENTS?DT=19970613131822
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Bob Shannon
Sent: Wednesday, January 07, 2009 10:11 AM
To: IBM-MAIN@bama.ua.edu
Subject: Need
Did you enter the complete TRACE function?
In SDSF, enter TRACE ON followed by TRACE 0080.
Then in SDSF select the job/command you are interested in and
enter TRACE OFF.
There will be an ISFTRACE dataset created under your TSU id in
Correct. It was dropped by IBM at z/OS 1.8.
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of John Norgauer
Sent: Thursday, November 20, 2008 3:33 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Run-time Environments from SHOWZOS
When I run SHOWZOS on
Jerry,
Change device type to UNIT=3270,MODEL=X to allow for all models of
3270 terminals.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Jerry Fuchs
Sent: Wednesday, November 19, 2008 9:56 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: IOGEN
Linda,
If you check the $TJOB command there is an operand called OFFS= which
is used to set/reset any of the offload indicator(s).
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Linda Mooney
Sent: Friday, November 14, 2008 4:45 PM
To:
How about D OPDATA
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Clark, Kevin
Sent: Wednesday, November 12, 2008 11:15 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: What is Display coomand for SSI characters
Hello All,
I am having a brain
Assuming you are on a current version of ISPF, if you check the 3.4
screen there is a field/option labelled Display Catalog Name. If you
place a / there the display will show you what CATALOG the file(s)
were found.
Dennis
-Original Message-
From: IBM Mainframe Discussion List
From: IBM Mainframe Discussion List on behalf of John Eells
Sent: Wed 8/20/2008 3:29 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: 3390-27
Dennis Trojak wrote:
How many cylinders on a 3390-27? I see conflicting doc of 32760 cyls or
3*10017 which is 30051. Can anybody confirm?
Dennis
The non-real
How many cylinders on a 3390-27? I see conflicting doc of 32760 cyls or
3*10017 which is 30051. Can anybody confirm?
Dennis
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with
I just have our scheduler system submit a batch SDSF job every morning
@0700 that issues a LOG S followed by ++ALL and that updates HASPINDX.
No more waiting on SYSLOG when I get in the morning.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
They are. AFAIK, MIM never sees them.
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Rob Scott
Sent: Tuesday, July 08, 2008 12:33 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: CA-MIM/Integrity abend.
I was under the impression that globals with
You sure about the GRSRNL=EXCLUDE? That's the way we run with MIM only
since we don't use GRS for global serialization. Didn't you just go
through RNL customization?
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of McKown, John
Sent:
You might try this freebie from IBM:
http://www-03.ibm.com/servers/eserver/zseries/zos/wlm/tools/wlmque.html
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Lizette Koehler
Sent: Wednesday, July 02, 2008 9:52 AM
To: IBM-MAIN@BAMA.UA.EDU
Works just fine on my PLEX via the TSO SEND command.
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of McKown, John
Sent: Monday, April 14, 2008 2:02 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Another stupid sysplex question.
Two TSO users on a
W START possibly.
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Yukus, Mary J CIV USMEPCOM
Sent: Monday, March 31, 2008 11:21 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: SYSLOG problem
Hi Everyone,
We have an issue with our syslog. The command
And see if the PREFIX is set to * for all names.
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of ??? ?? ???
Sent: Tuesday, March 25, 2008 7:07 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: More SDSF security questions
1. Issue the OWNER command
Add ILPROC=BATCH to your ISFOPER group name parameters in ISFGRP and it
should let you run batch jobs with your ISFOPER definitions for
userid=P390.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Rich Smrcina
Sent: Tuesday, March 25,
I have a multi-file tape that is a mix of both SL and SUL labels. When I
inquire on the volume or individual datasets using the RMM panels or
reports that use the CDS records I always get whatever the first file on
the physical tape happens to be. According to IBM there is no field that
contains
is associated with the volume and not the dataset. There seems to be an
assumption by the TMS vendors that there will not be a mix of label
types for stacked datasets.
HTH
Best regards,
Dee Shrier
Dino-Software Corporation
800-480-DINO (3466)
www.dino-software.com
[EMAIL PROTECTED]
Dennis
Already did. That's how I discovered the error. I'm using
CA-Encryption and the encrypted files are SUL but if the first file on a
stacked tape is SL then I have no way to report on that.
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Rick
about user labels? What will you do differently
if you
knew which had user labels?
Mike Wood RMM Development
On Fri, 7 Mar 2008 11:02:45 -0600, Dennis Trojak
[EMAIL PROTECTED] wrote:
Already did. That's how I discovered the error. I'm using
CA-Encryption and the encrypted files are SUL
Check the ST display on SDSF for TGNum and TGpct for JES2 track groups
being used by the tasks/jobs.
On the DA display you can use the DL on each task/job to get SPOOL
information for the job.
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of
Forget the replies, let DSF handle it:
//DSF EXEC PGM=ICKDSF,PARM='NOREPLYU'
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Paul Jodlowski
Sent: Thursday, December 27, 2007 7:53 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: FlashCopy
CLC X054STMV,=CL8'$'THIS A JES2 COMMAND?
JNE X54RET00 NO, LEAVE EXIT
should probably be
CLI X054STMV,C'$'THIS A JES2 COMMAND?
JNE X54RET00 NO, LEAVE EXIT
-Original Message-
From: IBM
Assuming you have both CF's defined in the structures preference list,
issue:
SETXCF START,RB,CFNAME=primarycf,LOC=OTHER
and the structures will be moved from primarycf to your secondary
LOC=NORMAL will put them back where originally defined.
-Original Message-
From: IBM
The message says you do NOT have a Master Console. You need to set one
of your consoles to MSTCONS, V cuu,MSTCONS ,before you can correct the
error.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Bielskie, Stephen
Sent: Friday, June
We are running ZFS under SUB=MSTR so it has no conflict with JES2
shutdown.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Shane Ginnane
Sent: Thursday, April 26, 2007 9:03 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: JES2 Shutdown issue
I checked the ISPPDF clist in my CPAC library and that dataset is not in
the ISPLLIB section nor would I expect to find it. SYS1.AOST4 is a DLIB
dataset.
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Nasuh KARAHALLI
Sent: Friday,
Well I hate to open this can of worms but I wonder if anybody has
suggestions on how to prevent damaging a PDSE in a dual SYSPLEX
environment running a MIMPLEX. I am running NORMAL not EXTENDED
PDSESHARING and I know that IBM (and CA) does NOT support this mode for
cross-system/sysplex updates so
RACDCERT EXPORT
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Pinnacle
Sent: Friday, March 30, 2007 8:46 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Can TN3270 SSL use RACF keyring?
Trying to set up SSL support for TN3270. The TN3270 clients I'm
Is SSM(YES) set in your CSFPRMxx member?
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of McKown, John
Sent: Monday, March 26, 2007 1:04 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: ICSF on z890?
-Original Message-
From: IBM Mainframe
Have you checked the ROUTCODE setting for SYSCONS?
Dennis
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Hal Merritt
Sent: Wednesday, January 31, 2007 11:33 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Console issue (was SAE and SAR with Visara)
I
Plenty of information at:
http://www-03.ibm.com/servers/eserver/zseries/zos/installation/zos17_jes
2_migration.html
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Peter Briedis
Sent: Monday, January 08, 2007 10:34 AM
To: IBM-MAIN@BAMA.UA.EDU
From SC26-7407, Implementing System-Managed Storage:
Recommendation: Place the SMS record before the JES2 record in IEFSSNxx
to start SMS before starting the JES2 subsystem.
Dennis..
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Lizette
Anybody having problems getting to ShopzSeries this morning?? I keep
getting page not found for
http://www14.software.ibm.com/webapp/ShopzSeries/ShopzSeries.jsp
--
For IBM-MAIN subscribe / signoff / archive access instructions,
I'll agree with you that encrypting everything is probably a waste of
resources but who decides what needs encrypting. We've got outside
regulators that insist credit card numbers will have to be encrypted in
ALL cases but who knows where it resides? My full volume dumps and HSM
data may have it
Same error I got.
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Edward Jaffe
Sent: Monday, July 10, 2006 12:27 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: IBMLink 3270 Logon Trouble
Am I the only one unable to logon today?
|LB0004
|
Two of 'em still! U being facetious?
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Richard Pinion
Sent: Monday, July 10, 2006 12:52 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: IBMLink 3270 Logon Trouble
Radio Shack has a mainframe
We've just got 1 in our museum.
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Bruce Black
Sent: Monday, July 10, 2006 3:10 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: IBMLink 3270 Logon Trouble
Two of 'em still! U being facetious?
We were
It's in the ShopZ CATALOG as IBM Ported Tools for z/OS
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of McKown, John
Sent: Tuesday, June 27, 2006 3:26 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Perl for zOS USS?
-Original Message-
Scenario:
I have a zFS multi-volume aggregate defined and mounted at /service .
File is allocated as CYL(500 500) to hold initial data and starts at 1
extent of 500 cylinders.
User starts adding data to the file system so it continues to grow to
over 60,000 cylinders but storage pool can handle
How about a conditional step after the FTP that checks return code GT
zero. We do that and send an e-mail via SMTP to the Production team
along with any special instructions.
Dennis..
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of McKown,
Has anybody seen any updates to the 3/31/2007 date for End-of-Service on
z/OS 1.5? The IBM web site still has an * next to it indicating it has
not been officially announced yet.
Is there any offering available from IBM that will still get you z/OS
1.5 for those of us still stuck on G5 hardware?
78 matches
Mail list logo
