What about the NSSs?
Thanks,
Alyce
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf
Of Eric R Farman
Sent: Friday, June 17, 2011 1:57 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: CLONEBKP: New package at zVM/downloads
FLASHCOPY SYNC
Has z/VM 6.2 been released?
Regards,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf
Of PHILIP TULLY
Sent: Wednesday, May 18, 2011 8:31 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: zvm directions
I see that the list traffic is kind of
Where in Italy?
Regards,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Pamela Christina - lovely autumn day @Endicott
Sent: Thursday, October 28, 2010 8:25 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Article: New MF in Italy, Linux
What put level of z/VM 5.4 is required to move it to the z10?
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Mark Pace
Sent: Thursday, August 26, 2010 11:25 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: z/VM 5.4 or 6.1 on
, Austin, Alyce (CIV)
aus...@nps.edu wrote:
What put level of z/VM 5.4 is required to move it to the z10?
You *need* to be at service level 902, aka RSU 5404, but you will *want*
to be at SL 1002 (RSU 5407), as some of the original PTFs were marked
PE.
See http://www.vm.ibm.com/service/vmreqz10.html
EDT, Austin, Alyce (CIV)
aus...@nps.edu wrote:
Is RSU 5407 available?
Yes. http://www.vm.ibm.com/service/rsu/ is your friend. From there you
can link to RSU contents, as well as discover how to equate the Service
Level with the stacked RSU number.
Alan Altmark
z/VM Development
IBM Endicott
On Thursday, 08/26/2010 at 05:33 EDT, Austin, Alyce (CIV)
aus...@nps.edu wrote:
Does RSU 5407 run on the z800?
RSUs don't change the architectural level set (ALS) or the supported
processor list for the release, so, yes, it still works on a z800.
Alan Altmark
z/VM Development
IBM Endicott
Do you need someone to carry your suitcases?
Congratulations...
Alyce
Naval Postgraduate School
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Mark Wheeler
Sent: Wednesday, March 17, 2010 8:08 AM
To:
,
Terry Martin
Lockheed Martin - Citic
z/OS and z/VM Performance Tuning and Operating Systems Support
Office - 443 348-2102
Cell - 443 632-4191
From: The IBM z/VM Operating System
[mailto:ib...@listserv.uark.edu] On Behalf Of Austin, Alyce
What agent are you using on your Linux guest?
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Mike Walter
Sent: Thursday, February 25, 2010 2:17 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: z/VM backuprestore procedure
If
Thanks, David...my user will install a new version of PSCP...
hopefully, it will work...
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of David Boyes
Sent: Tuesday, February 23, 2010 1:33 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject:
When I look in my sshd_config file,
I see:
#Protocol 2,1
Does this mean that ssh2 is the default?
Thanks again,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of David Boyes
Sent: Tuesday, February 23, 2010 1:33 PM
To:
What is the cost of the IBM Conference in Boston?
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Pamela Christina (a rainy day in Endicott)
Sent: Monday, January 25, 2010 10:47 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: 2010 IBM System z
Try:
smsg smtp listmail all
then,
smsg smtp pu
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of James M
Sent: Tuesday, October 20, 2009 10:24 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: smtp queue flush
Is there a command
I have an exec I used to backup the res volume.
If anyone would like a copy of it, I would be happy to share it...
Alyce
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Romanowski, John (OFT)
Sent: Thursday, June
I'm trying to find the z/VM 5.4 Performance Toolkit references.
I've only been successful in finding the one for 5.3.
Are they in a special place?
Thanks,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Rich Smrcina
Sent:
That was easy...
Thanks,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Mike Walter
Sent: Wednesday, March 18, 2009 3:29 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Anne Altman...
Rather that post her personal contact info in
Hi Rich,
I can chair the following session if you still need someone:
9240Tue04:30p1630Linux on z/VM System Programmer Survival Guide
Robert
(Jay) Brenneman
Alyce Austin
Naval Postgraduate School
Monterey, CA
831-656-2042
-Original Message-
From: The IBM z/VM
-Original Message-
From: Austin, Alyce (CIV)
Sent: Friday, January 23, 2009 1:41 PM
To: 'The IBM z/VM Operating System'
Cc: Austin, Alyce (CIV)
Subject: RE: SLES10 IPL...
OK...I thought the recover the root password procedure was
too good to be true!
I'll try one of the other methods
Hello Jeff,
I don't believe I have met you personally, but I'm sure you have helped me
on this list...
Think of your retirement as a new beginning and a restructuring of
your life...there are many adventures to pursue...search for your passion!
Regards,
Alyce
-Original Message-
From:
Hello,
I found the procedure to enter single user mode in the Virtualization
Cookbook for SLES 10 SPs2
(Oct 2008) on page 194 to recover the root password by entering the
following command at IPL:
#cp vi vmsg 0 1
However, when I get to the end of the procedure, it asks for the
, January 23, 2009 11:34 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: SLES10 IPL...
If you have given yourself the use of sudo without entering the root
password you can do
sudo passwd root
On Fri, Jan 23, 2009 at 2:22 PM, Austin, Alyce (CIV) aus...@nps.edu
wrote:
Hello,
I found
, January 23, 2009 1:19 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: SLES10 IPL...
On 1/23/2009 at 3:48 PM, Austin, Alyce (CIV) aus...@nps.edu
wrote:
Unfortunately, I don't have sudo set up yet on this system...
Is there something else I can try at single user mode, runlevel 1?
No. IPL from
Thanks, Mike...should I IPL in single user mode to do your suggested
steps below?
Alyce
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Michael MacIsaac
Sent: Friday, January 23, 2009 1:47 PM
To: IBMVM@LISTSERV.UARK.EDU
Hello,
I'm getting ready to order the PTFs for the enablement of
the z/VM 540 SSL server. Currently, I have 5.4 RSU 0801 installed
and running in test mode. Should I order a later RSU level too
and/or Updates for for CMS Service?
Thanks for your help,
Alyce
-Original Message-
From:
Thanks, Kris!
After doing vmfsetup zvm cp, I found the file...(However, I didn't see
that step defined in the documentation.)
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Kris Buelens
Sent: Wednesday, November 19, 2008 9:27 AM
To:
I ran the installation again and
clicked on the change drop-down menu in the Installation Settings
window
and selected software; however, the Software Selection window
does not come up...it goes directly to the confirm installation and
begins installing all 800 plus software packages again...
I
Hi Mike,
I followed the directions in the SuSE Linux Enterprise Server Starter
System for System Z:
Installation Guide for NOVSTART which came up fine and then began the
full-service Server (CLIENT) from the Starter System.
When I got the message run 'yast' to start the installation, I
Don't be afraid -- you're not going to break anything... And besides -
we're here if you do :-)
Best of luck - Scott
On Tue, Sep 30, 2008 at 4:02 PM, Austin, Alyce (CIV) [EMAIL PROTECTED]
wrote:
I was afraid I might get locked out
-Original Message-
From: The IBM z/VM Operating
, October 02, 2008 1:00 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: SLES10 Client
On 10/2/2008 at 2:04 PM, in message
[EMAIL PROTECTED], Austin,
Alyce
(CIV) [EMAIL PROTECTED] wrote:
Well, I tried both the starter system default password and the new
password I changed it to
to logon on as root
-6001
Ans Service: 360-715-2467
rich.smrcina at vmassist.com
http://www.linkedin.com/in/richsmrcina
Catch the WAVV! http://www.wavv.org
WAVV 2009 - Orlando, FL - May 15-19, 2009
Austin, Alyce (CIV) wrote:
Hello...
I have good news: after leaving out the portname, I was able to get
further
Subject: Re: SLES10 Client
On 9/30/2008 at 4:20 PM, in message
[EMAIL PROTECTED], Austin,
Alyce
(CIV) [EMAIL PROTECTED] wrote:
Hi Everyone,
Well, I made it to:
*** login using 'ssh -X [EMAIL PROTECTED]' ***
*** run 'yast' to start the installation ***
Am I
or policies of Hewitt Associates.
Austin, Alyce (CIV) [EMAIL PROTECTED]
Sent by: The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU
09/30/2008 04:01 PM
Please respond to
The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
Re: SLES10 Client
OOPs
and do not necessarily
represent the opinions or policies of Hewitt Associates.
Austin, Alyce (CIV) [EMAIL PROTECTED]
Sent by: The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU
09/30/2008 04:33 PM
Please respond to
The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU
To
IBMVM
the
question is asked. So when the question comes up:
Device address for read channel [e003]
You respond:
0.0.0340
It will subsequently ask for the write channel and data channel, just
reply with the device numbers in ascending sequence in the same format.
Austin, Alyce (CIV) wrote:
But, why does
I initially said no to layer 2 and eventually is ask me again if I
want to enable layer 2
Thanks,
Alyce
Enable OSI Layer 2 support?
1) Yes
2) No
2
Please select the type of your network device.
1) OSA-2 or OSA Express
2) Hipersockets
3) Channel To Channel
System [mailto:[EMAIL PROTECTED] On
Behalf Of Mark Post
Sent: Monday, September 29, 2008 2:56 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: SLES10 Client
On 9/29/2008 at 2:47 PM, in message
[EMAIL PROTECTED], Austin,
Alyce
(CIV) [EMAIL PROTECTED] wrote:
I initially said no to layer 2
Hello,
From my Client userid, I type SLES to bring up the
full-service server for SLES10: This is what I get:
Why is it looking for the CDs when I have a starter system implemented?
sles
NO FILES PURGED
RDR FILE 0027 SENT FROM CLIENT PUN WAS 0027 RECS 090K CPY 001 A
NOHOLD NOKEEP
RDR
off spending a little time researching VIRTUAL
SWITCHes and using them instead of real OSA addresses.
Mike Walter
Hewitt Associates
Any opinions expressed herein are mine alone and do not necessarily
represent the opinions or policies of Hewitt Associates.
Austin, Alyce (CIV) [EMAIL
So, the starter systems does need to be up to implement the new server?
Thanks,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of David Boyes
Sent: Wednesday, September 24, 2008 3:10 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: SLES10
to be up.
Austin, Alyce (CIV) wrote:
So, the starter systems does need to be up to implement the new
server?
Thanks,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]
On
Behalf Of David Boyes
Sent: Wednesday, September 24, 2008 3:10 PM
Does NOVSTART have to be up to IPL the client?
Thanks,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Rich Smrcina
Sent: Wednesday, September 24, 2008 1:48 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: SLES10 Client
It's asking for the
It is on page 31, starting with Specify the network address of the
starter system server...
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of David Boyes
Sent: Wednesday, September 24, 2008 2:35 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: SLES10
Hello Everyone,
Thanks for all your responses. My network connectivity
is working now and I can ping the address; however, when I
try to access my new linux environment thru my putty client, it
doesn't connect. (I can access my current linux thru putty
without a problem.) Do I need to do
: Network-SLES10
In the SSH configuration make sure you have Version 2 checked. You may
need to upgrade your Putty.
Austin, Alyce (CIV) wrote:
Hello Everyone,
Thanks for all your responses. My network connectivity
is working now and I can ping the address; however, when I
try to access my new
I didn't want to change for production network to vswitch.
However, I plan on using it in z/VM 5.4.
I have e000-e0002 dedicated to userid NOVSTART.
Thanks,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of
Dean, David (I/S)
Sent:
Hello again,
After doing the link novstart 191 f191 MR, the cmsddr restore appeared
to work. This is what I got as a response:
q v f191
DASD F191 3390 52LNX1 R/W 5 CYL ON DASD 5437 SUBCHANNEL = 000A
Ready; T=0.01/0.01 09:29:40
set pf12 retrieve
Ready; T=0.01/0.01 09:30:35
cmsddr
at 12:36 PM, Austin, Alyce (CIV) [EMAIL PROTECTED]
wrote:
Hello again,
After doing the link novstart 191 f191 MR, the cmsddr restore
appeared
to work. This is what I got as a response:
q v f191
DASD F191 3390 52LNX1 R/W 5 CYL ON DASD 5437 SUBCHANNEL =
000A
Ready; T=0.01/0.01 09:29
Hello Everyone,
A colleague sent me this website Linux Cheat Sheets and I thought
I would share it with you. (I don't see one dedicated to IBM z/Series
just
IBM (AIX) Cheat sheets.)
http://www.scottklarr.com/topic/115/linux-unix-cheat-sheets---the-ultima
te-collection/
Thanks for all your
@LISTSERV.UARK.EDU
Subject: Re: SUSE Linux Enterprise Server 10 SP2 Starter System for IBM
System z
On Tue, Jul 22, 2008 at 6:03 PM, in message
[EMAIL PROTECTED], Austin,
Alyce
(CIV) [EMAIL PROTECTED] wrote:
I'm glad to hear that you were successful. We will be upgrading
from SuSE 8.2 to SuSE 10
I'm glad to hear that you were successful. We will be upgrading
from SuSE 8.2 to SuSE 10 sp2.
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Le Blanc, Frank
Sent: Tuesday, July 22, 2008 5:22 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: SUSE
We have a one year contract with Novell until May 2009.
They gave us a unique activation code. They told me to download
the CD1-CD2 disks from their site.
Can I use the SUSE Linux Enterprise Server Starter
System for System z to install it?
I'm confused...
Thanks,
Alyce
-Original
Thanks, David...for clearing it up for me.
I'm no longer confused!!
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of David Boyes
Sent: Monday, July 21, 2008 10:13 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: SUSE Linux Enterprise Server
I downloaded the 'vanilla SLES10 SP2 sent to me by Novell to my PC;
that is
CD1-CD4.
I was going to use the Installing a NOVELL SLES 10 Starter System
without
a Net(work) handout from the Mar 08 SHARE to try to do the install
without
a network.
I assume that the document SUSE Linux
Can you go from 5.2 to 5.4 when it does come out?
Thanks,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Les Geer (607-429-3580)
Sent: Friday, May 09, 2008 12:10 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: z/VM 5.2 EOS?
How does this
80, (but V 80 may work as well). To be
axact:
PIPE MONVIEW VMARC A | FBLOCK 80 00 | NEWFILE VMARC A F 80
2008/3/27, Austin, Alyce (CIV) [EMAIL PROTECTED]:
Hi Berry and Mike,
Your pipe commands appear to have worked. After issuing them this is
what I see:
CP2KVMXT VMARCA1
Hello,
When I issue the following vmarc commands in preparation for the
monwrite procedures,
this is what I get:
vmarc unpk monview vmarc a
MONVIEW SCRIPT A1. Bytes in= 11776, bytes out= 6168 (
52%).
Invalid header for compacted file.
Ready(8); T=0.01/0.01 13:38:10
, that only a part of the files (monview script and
cp2kvmxt exec) is now on disk. At some point, either at the end of a
record or at the end of a file invalid data is found. So delete the
files that were unpacked, upload the VMARC files again and unpack again.
Regards, Berry.
Austin, Alyce (CIV) schreef
Hello,
Does the MONWRITE userid have to be on the RES volume to collect data?
Thanks,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Jim Bohnsack
Sent: Tuesday, March 18, 2008 8:01 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: MONWRITE
minidisks are not on the
sysres
volume.
/Tom Kern
/301-903-2211
On Wed, 19 Mar 2008 10:32:44 -0700, Austin, Alyce (CIV) [EMAIL PROTECTED]
wrote:
Hello,
Does the MONWRITE userid have to be on the RES volume to collect data?
Thanks,
Alyce
[mailto:[EMAIL PROTECTED] On
Behalf Of Austin, Alyce (CIV)
Sent: Tuesday, February 19, 2008 11:55 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Backup CMS files
Are you using TSM for file level backups? If so, are
you happy with it?
Thanks,
Alyce
-Original Message-
From: The IBM z/VM
Are you using TSM for file level backups? If so, are
you happy with it?
Thanks,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Alan Ackerman
Sent: Sunday, February 17, 2008 7:34 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Backup CMS
I assume I could also bring my new system up lst level
rather than 2nd level since I have an additional LPAR available; or, do
I have to bring it up 2nd level first (with the new volumes attached)
and then bring it up lst level?
Thanks again,
Alyce
-Original Message-
From: The IBM
I doubled checked my slot numbers in my new systemxx file and the
the spool file is in the same slot number...as are all the other
volumes.
Now, I have to remember to put my new cons=addr and fn=systemxx in the
parameter section of my SAPL screen when I IPL to point to my new
systemxx config file
to the server. The
network
time will get reduced when we can get z/OS.e to learn how to talk to a
hypersocket.
/Tom Kern
/301-903-2211
On Wed, 3 Oct 2007 11:01:52 -0700, Austin, Alyce (CIV) [EMAIL PROTECTED]
wrote:
Are you using TSM to backup Linux at the file level too (so, you don't
have to log off
Hi Kris,
Thanks for your reply...but, I didn't see your execs. Did you forget to
attach them?
I guess the CONLOG and HISTLOG files get cleaned up by some other
process since
I did see them specify in the FCONX $PROFILE file on PERFSVM's 191 disk.
Thanks again,
Alyce
OK...hopefully, I won't write over my existing production directory
on my production systems...
Thanks,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Southerland, Steven L
Sent: Wednesday, July 18, 2007 2:51 PM
To:
So, if you want to change the monitor settings, I assume
you would enter monset to enable or disable events?
Thanks,
Alyce
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Kris Buelens
Sent: Friday, April 06, 2007 10:32 AM
To:
Thanks, Kris...
I'll check out URLIST...it might be what I want to use now...
Is there a new version for z/VM 5.2?
Thanks again,
Alyce
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Kris Buelens
Sent: Saturday, March
@LISTSERV.UARK.EDU
Subject: Re: Exec errors
URLIST did not require changes for z/VM 5.2. I just uploaded the latest
level to the VM download lib.
2007/4/2, Austin, Alyce (CIV) [EMAIL PROTECTED] :
Thanks, Kris...
I'll check out URLIST...it might be what I want to use now...
Is there a new version for z
When I enter, my CHECKRDR command on z/VM 4.4, this is what I see:
READER FILEST1 F 80 Trunc=80 Size=4099 Line=39 Col=1 Alt=1
PF13= PURGE the highlighted reader file. PF21= SORT by LARGEST file.
(OPEN files can't be purged) PF22= SORT by DATE.
Thanks! I guess by using the tzset and date commands,
you can set the date and timezone dynamically too...
is that true?
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of McKown, John
Sent: Wednesday, January 24, 2007 6:15 AM
To:
Hello,
I'm installing z/VM 5.2; however, I'm only using RTM on my z/VM 4.4.
system.
Do I need to apply this fix to 5.2 even though I'm not running PTK on my
current system?
Thanks,
Alyce
From: The IBM z/VM Operating System [mailto:[EMAIL
---
Law of Logical Argument: Anything is possible if you don't know what you
are talking about.
Inactive hide details for Austin, Alyce (CIV) [EMAIL PROTECTED]Austin,
Alyce (CIV) [EMAIL PROTECTED]
Austin, Alyce (CIV) [EMAIL PROTECTED]
Sent by: The IBM z/VM Operating System IBMVM
Hopefully, all my execs that work under RTM will work with perfkit...
Thanks,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of David Boyes
Sent: Friday, October 27, 2006 5:54 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: VM 4.4 to 5.2
In regards to the migration from z/VM 4.4 to z/VM 5.2, are there
any problems running 4.4 RTM under 5.2? Will 5.2 accept the
enablement
of RTM?
Thanks,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Mark Wheeler
Sent: Thursday,
Hi again,
I had gone to the below site before I sent this note,
but I didn't see anything referencing the mainframe Linux environment.
Maybe, the lastest OpenSSH is already included in 8.2. (We will be
upgrading our Linux in a few months to SLES10).
Thanks for your help,
Alyce
-Original
In regards to paging, should MDC be off for a Linux guest
running under z/VM? That is, MINIOPT NODMC to reduce paging?
Thanks,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Brian Nielsen
Sent: Monday, September 11, 2006 2:18 PM
To:
Hi Alan,
I assume this means support for z/VM 4.4 running on a z800
platform will not be supported after 30 September too?
Thanks,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Alan Altmark
Sent: Thursday, June 22, 2006 2:24 PM
To:
Because of the growing pains with 5.2, is support for z/VM 4.4 going
to be extended beyond 9/06?
Thanks,
Alyce
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Jim Vincent
Sent: Tuesday, March 28, 2006 11:00 AM
To: IBMVM@LISTSERV.UARK.EDU
80 matches
Mail list logo
