Thanks Rob!
Thank You,
Terry Martin
Lockheed Martin - Information Technology
z/OS z/VM Systems - Performance and Tuning
Cell - 443 632-4191
Work - 410 786-0386
terry.mar...@cms.hhs.gov
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of
for swap, prioritize them, and set an
alert when the 2nd disk is being used.
Martin, Terry R. (LOCKHEED MARTIN Performance Engineering/CTR) (CTR)
wrote:
Hi
I am using SWAPGEN to define by z/Linux VDISKS I also want to define a
real disk for swap. My question is can I use SWAPGEN
resource that you allocate but never
want to use, and assign it to z/VM paging to enhance your paging
subsystem. Then define two vdisks for swap, prioritize them, and set an
alert when the 2nd disk is being used.
Martin, Terry R. (LOCKHEED MARTIN Performance Engineering/CTR) (CTR)
wrote:
Hi
.
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Martin, Terry R. (LOCKHEED MARTIN Performance Engineering/CTR)
(CTR)
Sent: Thursday, April 30, 2009 5:35 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: [IBMVM] SWAPGEN
Scott Wrote
Hi
I am using SWAPGEN to define by z/Linux VDISKS I also want to define a
real disk for swap. My question is can I use SWAPGEN to define a swap on
real DASD? If you have an example of the control card syntax to
accomplish this that would be great?
Thank You,
Terry Martin
Lockheed
...@listserv.uark.edu]
On
Behalf Of Martin, Terry R. (LOCKHEED MARTIN Performance
Engineering/CTR)
(CTR)
Sent: Thursday, April 09, 2009 12:38 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Problems with IPLing a SECOND LEVEL z/VM 5.3
Hi
I am taking my first crack at building a 2nd level z/VM under
Hi
I am taking my first crack at building a 2nd level z/VM under my 1st
level z/VM. I tried IPLing the 2nd level and I am receiving the
following:
13:20:27 Start ((Warm|Force|COLD|CLEAN) (DRain) (DIsable) (NODIRect)
13:20:27 (NOAUTOlog)) or (SHUTDOWN)
, Terry R. (LOCKHEED MARTIN
Performance Engineering/CTR) (CTR) terry.mar...@cms.hhs.gov wrote:
Hi Scott,
Probably don't need to. What I am doing is a DFDSS full volume copy of
my test system to a new set of system and user packs. I defined some
mdisks on the running system pointing to the SYSTEM
Hi
I am just curious about the steps to configure the ICC console
particular in the area of the GEN. I happen to be looking at setting up
the ICC now so some help would be greatly appreciated.
Thank You,
Terry Martin
Lockheed Martin - Information Technology
z/OS z/VM Systems - Performance
Sent: Wednesday, April 08, 2009 2:24 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Format a SPPOL VOLUME on First IPL
That's grand! Glad you got past any issues and have a new system..
Scott
On Wed, Apr 8, 2009 at 12:17 PM, Martin, Terry R. (LOCKHEED MARTIN
Performance Engineering/CTR) (CTR
Hi
I am building a new test system and I want the first IPL to format the
spool volume. Currently VM is set up to IPL automatically WARM.
Where/how do I change it to prompt for a Startup parameter at IPL time
so that I can specify the formatting of the spool volume?
Thank You,
Terry
From: The IBM z/VM Operating System
[mailto:ib...@listserv.uark.edu] On Behalf Of Martin, Terry R. (LOCKHEED
MARTIN Performance Engineering/CTR) (CTR)
Sent: Tuesday, April 07, 2009 1:53 PM
To: IBMVM@LISTSERV.UARK.EDU
- enter the ICKDSF statements to format whatever you want.
When done, reipl the normal way
2009/4/7 Martin, Terry R. (LOCKHEED MARTIN Performance
Engineering/CTR) (CTR) terry.mar...@cms.hhs.gov:
Hi
I am building a new test system and I want the first IPL to format
the spool
get an error from the
autolog and show us that..
Scott
On Tue, Apr 7, 2009 at 3:03 PM, Martin, Terry R. (LOCKHEED MARTIN
Performance Engineering/CTR) (CTR) terry.mar...@cms.hhs.gov wrote:
Hi Scott,
Probably don't need to. What I am doing is a DFDSS full volume copy of
my test system
Martin, Terry R. (LOCKHEED MARTIN
Performance
Engineering/CTR) (CTR) terry.mar...@cms.hhs.gov:
Hi
I am building a new test system and I want the first IPL to
format the spool
volume. Currently VM is set up to IPL automatically
Thanks mark. I will let you know how it goes!
Thank You,
Terry Martin
Lockheed Martin - Information Technology
z/OS z/VM Systems - Performance and Tuning
Cell - 443 632-4191
Work - 410 786-0386
terry.mar...@cms.hhs.gov mailto:terry.mar...@cms.hhs.gov
Hi
I want to copy my test system over to another LPAR. I want to be able to
IPL the new system with an updated SYSTEM CONFIG file and the USER
DIRECTORY. What is the best way to do this? I figured I would do
something like:
1. Create a new SYSTEM CONFIG file with the changes that
Hi Mark,
Thanks for the information. The one thing I forgot to mention was that I
cannot access the new addresses from the z/VM LPAR that I am copying to.
So that is why I needed a way to make the changes before I copied the
packs over so that when they were copied to the new the System Config
Hi
I am testing gout the RACFSMF SMF switching process and I want to issue
the SMF SWITCH command to RACFVM. When I try to issue the SMSG RACFSM
SMF SWITCH it tells me that in this case that my MAINT user id does not
have the authority to issue the SMSG. What do I need to set this
authority
, but the standard ASSEMBLE coimmand can
still compile it into CSTCONS TEXT.
Don't tell the enemy: OPERATOR is by default in the file, hence CP
SEND CP OPERATOR SMSG RACFVM will work
2009/3/23 Martin, Terry R. (LOCKHEED MARTIN Performance
Engineering/CTR) (CTR) terry.mar...@cms.hhs.gov
2009/3/23 Martin, Terry R. (LOCKHEED MARTIN Performance
Engineering/CTR) (CTR) terry.mar...@cms.hhs.gov:
Hi
I am testing gout the RACFSMF SMF switching process and I want to
issue the
SMF SWITCH command to RACFVM. When I try to issue the SMSG RACFSM SMF
SWITCH
it tells me
Hi
I asked this in another thread but I thought it might be better in a
separate one for archiving purposes. Anyway I am trying to get the
RACFSMF SMF switch process to work. I modified the SMF CONTROL file to
specify the correct LPAR and added the RACFSMF machine name at the end
of the
you view cols 1 to 80. If you overtype beyond col 80,
XEDIT throws that away.
That's why I suggested COPYFILE (LRECL 100 and VERIFY 1 100 in the other
tread?
2009/3/23, Martin, Terry R. (LOCKHEED MARTIN Performance
Engineering/CTR) (CTR) terry.mar...@cms.hhs.gov:
Hi
I asked
. (LOCKHEED MARTIN Performance
Engineering/CTR) (CTR) terry.mar...@cms.hhs.gov:
Hi
I asked this in another thread but I thought it might be better in a
separate one for archiving purposes. Anyway I am trying to get the
RACFSMF
SMF switch process to work. I modified the SMF CONTROL file
I suggested COPYFILE (LRECL 100 and VERIFY 1 100 in the
other
tread?
2009/3/23, Martin, Terry R. (LOCKHEED MARTIN Performance
Engineering/CTR) (CTR) terry.mar...@cms.hhs.gov:
Hi
I asked this in another thread but I thought it might be better
Hi
I forget, how much VDISK total is allowed for a Linux guest?
Thank You,
Terry Martin
Lockheed Martin - Information Technology
z/OS z/VM Systems - Performance and Tuning
Cell - 443 632-4191
Work - 410 786-0386
terry.ma...@cms.hhs.gov
Telecommuting on Fridays - Use my cell
Rob,
I am setting these disks up using SWAPGEN. I am adding enough to total about
4G(This is about what my paging subsystem will handle). This is the test that
we spoke of!
Thank You,
Terry Martin
Lockheed Martin - Information Technology
z/OS z/VM Systems - Performance and Tuning
Cell - 443
On Mar 13, 2009, at 10:54 AM, Martin, Terry R. (LOCKHEED MARTIN
Performance Engineering/CTR) (CTR) wrote:
Rob,
I am setting these disks up using SWAPGEN. I am adding enough to
total about 4G(This is about what my paging subsystem will handle).
This is the test that we spoke of!
SWAPGEN
] On
Behalf Of Adam Thornton
Sent: Friday, March 13, 2009 2:29 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Total VDISK space allowed
On Mar 13, 2009, at 1:06 PM, Martin, Terry R. (LOCKHEED MARTIN
Performance Engineering/CTR) (CTR) wrote:
Hi Adam,
What is the format of the SWAPGEN command if you
...@listserv.uark.edu] På vegne af
Martin, Terry R. (LOCKHEED MARTIN Performance Engineering/CTR) (CTR)
Sendt: 11. marts 2009 23:07
Til: IBMVM@LISTSERV.UARK.EDU
Emne: MDISK DEFINITION in MAINT DIRECTORY ENTRY
Hi
I did a DISKMAP USER DIRECTORY and while viewing the output I noticed that I
had
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Martin, Terry R. (LOCKHEED MARTIN Performance Engineering/CTR)
(CTR)
Sent: Wednesday, March 11, 2009 6:07 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: MDISK DEFINITION in MAINT DIRECTORY ENTRY
Hi
I did
Hi
I did a DISKMAP USER DIRECTORY and while viewing the output I noticed
that I had a few 'OVERLAYS'.
In my MAINT directory entry I have the following:
MDISK 122 3390 000 END 530SPL MR
MDISK 123 3390 000 END 530RES MR
MDISK 124 3390 000 END 530W01 MR
MDISK 125 3390 000 END
32 matches
Mail list logo
