IBM Endicott, NY
From: Daniel Tate
To: IBMVM@LISTSERV.UARK.EDU
Date: 04/15/2010 10:50 AM
Subject:Re: z/VM not seeing stor
IBM Endicott, NY
From: Daniel Tate
To: IBMVM@LISTSERV.UARK.EDU
Date: 04/15/2010 10:50 AM
Subject:Re: z/VM not seeing
uot;0x5005076400c0b742"
permanent_port_name = "0x500507601d80074f" <<
Sent by: The IBM z/VM Operating System
04/20/2010 02:14 PM
Please respond to
The IBM z/VM Operating System
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
Re: z/VM not seeing storage from SAN
No
tered WWPNs from the switch connected to the
>>> selected FCP subchannel(s). If it only reports the one you had attached, it
>>> doesn't sound like the switch zones are setup properly to let the LPAR see
>>> the DASD subsystems. Has the SAN admin registered the p
From: Daniel Tate
To: IBMVM@LISTSERV.UARK.EDU
Date: 04/15/2010 10:50 AM
Subject:Re: z/VM not seeing storage from SAN
Sent by:The IBM z/VM Op
ubsystems. Has the SAN admin registered the physical WWPN of the
>> card with the switch zone, or the NPIV WWPNs (displayed on Q FCP output)?
>> The latter is necessary in NPIV environment.
>>
>> Regards,
>>Eric
>>
>> Eric Farman
>> z/V
On 4/20/10 13:13 Daniel Tate said:
This is the output from SCSIDISC DEBUG.
INFO::Choosen FCP Sub-Channel Device(s)=ALL DEVICES
... from all the available chooses ... :-)
INFO::For 5000 Choosen WWPN(s)=ALL WWPNs
At least it's consistent... :-/
-Chip-
isplayed on Q FCP output)?
> The latter is necessary in NPIV environment.
>
> Regards,
>Eric
>
> Eric Farman
> z/VM I/O Development
> IBM Endicott, NY
>
>
>
> From:
> Daniel Tate
> To: IBMVM@LISTSERV.UARK.EDU Date: 04/15/
gt; rayhi...@us.ibm.com
>
>
> *Daniel Tate *
> Sent by: The IBM z/VM Operating System
>
> 04/19/2010 12:20 PM
> Please respond to
>
> The IBM z/VM Operating System
>
> To
> IBMVM@LISTSERV.UARK.EDU
> cc
> Subject
> Re: z/VM not seeing storage from SA
com
Daniel Tate
Sent by: The IBM z/VM Operating System
04/19/2010 12:20 PM
Please respond to
The IBM z/VM Operating System
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
Re: z/VM not seeing storage from SAN
OK, we *briefly* got the SAN to show a disk, i was able to format,
everything.. we atte
Regards,
>Eric
>
> Eric Farman
> z/VM I/O Development
> IBM Endicott, NY
>
>
>
> From:
> Daniel Tate
> To: IBMVM@LISTSERV.UARK.EDU Date: 04/15/2010 10:50 AM Subject: Re: z/VM
> not seeing storage from SAN Sent by: The IBM z/VM Operating System <
&g
bject:
Re: z/VM not seeing storage from SAN
Sent by:
The IBM z/VM Operating System
scsidisc only reports those i've attached. That particular output was
from a different device (i.e. 5001).. my terminology is a little off.
Our SAN admin swears it's configured correctly on the sw
It's an Hitachi SAN through a Cisco fibre switch. NPIV is on on all. NPV,
however, is not
On Thu, Apr 15, 2010 at 8:53 PM, Mark Pace wrote:
> What is the back-end storage?If DS have the appropriate Hostconnect
> been created?
>
>
> On Thu, Apr 15, 2010 at 10:19 AM, Daniel Tate wrot
What is the back-end storage?If DS have the appropriate Hostconnect
been created?
On Thu, Apr 15, 2010 at 10:19 AM, Daniel Tate wrote:
> scsidisc only reports those i've attached. That particular output was from
> a different device (i.e. 5001).. my terminology is a little off. Our
scsidisc only reports those i've attached. That particular output was from
a different device (i.e. 5001).. my terminology is a little off. Our SAN
admin swears it's configured correctly on the switch.
On Thu, Apr 15, 2010 at 9:38 AM, Eric R Farman wrote:
> Hi Daniel,
>
> The WWPN listed
Hi Daniel,
The WWPN listed in your Q FCP outputs and that from the SCSIDISC tool are
similar enough that I suspect they are different subchannels on the same
FCP card, and not of your target DASD subsystem. Are there other WWPNs
listed in the SCSIDISC output beyond what you have sent? If so,
16 matches
Mail list logo