Oops. Said that backwards. It needs to be ON .
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Marcy Cortes
Sent: Wednesday, April 21, 2010 9:16 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: [IBMVM] z/VM not seeing storage from SAN
ating System'
Subject: RE: [IBMVM] z/VM not seeing storage from SAN
It looks like you are not getting logged into the fabric (which you should be
able to check from the SE Fabric Login Status page)
(see page 19 http://www.redbooks.ibm.com/redpapers/pdfs/redp4125.pdf )
If you aren't, switch
uot;0x5005076400c0b742"
permanent_port_name = "0x500507601d80074f" <<
Sent by: The IBM z/VM Operating System
04/20/2010 02:14 PM
Please respond to
The IBM z/VM Operating System
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
Re: z/VM not seeing storage from SAN
No
tered WWPNs from the switch connected to the
>>> selected FCP subchannel(s). If it only reports the one you had attached, it
>>> doesn't sound like the switch zones are setup properly to let the LPAR see
>>> the DASD subsystems. Has the SAN admin registered the p
ect: Re: [IBMVM] z/VM not seeing storage from SAN
I am a little confused about what WWPN goes where in your case.
Based on prior email, C05076FAE3000400 is the WWPN of your virtual FCP adapter
(because NPIV is in place). It starts with a "C". But 50060E80042CC20C looks
to me more
ubsystems. Has the SAN admin registered the physical WWPN of the
>> card with the switch zone, or the NPIV WWPNs (displayed on Q FCP output)?
>> The latter is necessary in NPIV environment.
>>
>> Regards,
>>Eric
>>
>> Eric Farman
>> z/V
On 4/20/10 13:13 Daniel Tate said:
This is the output from SCSIDISC DEBUG.
INFO::Choosen FCP Sub-Channel Device(s)=ALL DEVICES
... from all the available chooses ... :-)
INFO::For 5000 Choosen WWPN(s)=ALL WWPNs
At least it's consistent... :-/
-Chip-
isplayed on Q FCP output)?
> The latter is necessary in NPIV environment.
>
> Regards,
>Eric
>
> Eric Farman
> z/VM I/O Development
> IBM Endicott, NY
>
>
>
> From:
> Daniel Tate
> To: IBMVM@LISTSERV.UARK.EDU Date: 04/15/
gt; rayhi...@us.ibm.com
>
>
> *Daniel Tate *
> Sent by: The IBM z/VM Operating System
>
> 04/19/2010 12:20 PM
> Please respond to
>
> The IBM z/VM Operating System
>
> To
> IBMVM@LISTSERV.UARK.EDU
> cc
> Subject
> Re: z/VM not seeing storage from SA
com
Daniel Tate
Sent by: The IBM z/VM Operating System
04/19/2010 12:20 PM
Please respond to
The IBM z/VM Operating System
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
Re: z/VM not seeing storage from SAN
OK, we *briefly* got the SAN to show a disk, i was able to format,
everything.. we atte
Regards,
>Eric
>
> Eric Farman
> z/VM I/O Development
> IBM Endicott, NY
>
>
>
> From:
> Daniel Tate
> To: IBMVM@LISTSERV.UARK.EDU Date: 04/15/2010 10:50 AM Subject: Re: z/VM
> not seeing storage from SAN Sent by: The IBM z/VM Operating System <
&g
bject:
Re: z/VM not seeing storage from SAN
Sent by:
The IBM z/VM Operating System
scsidisc only reports those i've attached. That particular output was
from a different device (i.e. 5001).. my terminology is a little off.
Our SAN admin swears it's configured correctly on the sw
5000 TO * command would be used for a guest to use,
>>> such as for SCSIDISC or Linux itself configuring SCSI.
>>>
>>> Regards,
>>>Eric
>>>
>>> Eric Farman
>>> z/VM I/O Development
>>> IBM Endicott, NY
>>>
;> to SYSTEM.) The ATTACH 5000 TO * command would be used for a guest to use,
>> such as for SCSIDISC or Linux itself configuring SCSI.
>>
>> Regards,
>>Eric
>>
>> Eric Farman
>> z/VM I/O Development
>> IBM
t;
>
> From: Daniel Tate To: IBMVM@LISTSERV.UARK.EDU
> Date: 04/14/2010 02:40 PM Subject: z/VM not seeing storage from SAN Sent
> by: The IBM z/VM Operating System
> --
>
>
>
> Disclaimer: I am a UNIX admin, working with z/VM for the first tim
M not seeing storage from SAN
Sent by:
The IBM z/VM Operating System
Disclaimer: I am a UNIX admin, working with z/VM for the first time.
I only know basic commands and concepts, but really need to get this
working.
Our san is connected, and other LPARs can see the storage. the CHPID
is o
Disclaimer: I am a UNIX admin, working with z/VM for the first time.
I only know basic commands and concepts, but really need to get this
working.
Our san is connected, and other LPARs can see the storage. the CHPID
is online. I can attach the storage (ATTACH 5000 to *) and SET EDEV
blahblahba
17 matches
Mail list logo
