riday, January 03, 2003 9:25 PM
To: Alec Miller
Cc: [EMAIL PROTECTED]
Subject: Re: [leaf-user] web server proxy (squid.lrp??)
Alec Miller wrote:
> Is there a package for Dachstein CD that can proxy incoming web addresses
> btw different web servers?
>
> incoming web requests get redirec
Is there a package for Dachstein CD that can proxy incoming web addresses
btw different web servers?
incoming web requests get redirected to a specific web server based on the
domain name rather than having all the domains on one server using host
headers or virtual domains?
i.e. domain1.com /
f computer that I
am building.
Thanks
Alec
-Original Message-
From: Charles Steinkuehler [mailto:[EMAIL PROTECTED]]
Sent: Sunday, August 11, 2002 10:47 AM
To: Alec Miller; [EMAIL PROTECTED]
Subject: Re: [leaf-user] Dachstein-CD eth3 / DMZ error
> ahhh... this is th
oh, and I started out from scratch with a new network.conf too.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Charles
Steinkuehler
Sent: Friday, August 09, 2002 4:01 PM
To: Alec Miller; [EMAIL PROTECTED]
Subject: Re: [leaf-user] Dachstein-CD eth3
nto the DMZ from the
eth0_IP_EXTRA_ADDRS? (which I never figured out from the start)
Thanks again,
Alec
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Charles
Steinkuehler
Sent: Friday, August 09, 2002 4:01 PM
To: Alec Miller; [EMAIL PROTECTED]
Subject: Re: [lea
1:19 PM
To: Alec Miller; [EMAIL PROTECTED]
Subject: Re: [leaf-user] Dachstein-CD eth3 / DMZ error
> Now here is the error I get when i run 'svi network reload'. I have
> tracked it down to the DMZ_SERVERx list. When I comment them out the
error
> list shrinks.
>
> I
I am trying to setup a DMZ with a few extra ips I have. And I can't figure
out where I went wrong. My interface configs look like this:
eth0_IPADDR=66.93.80.54
eth0_MASKLEN=24
eth0_BROADCAST=255.255.255.0
# Use this to set the default route if required - ONLY one to be set.
# routed or gated co
anyone know where I can find a axfrdns package for TinyDNS that I can use
with Secondary.com??
or know a secondary name service I can use with TinyDNS.lrp ?
thanks
Alec Miller
---
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com
I've got 2 Speakeasy DSL lines both on the same Subnet/Gateway.Are there
any FAQ/Quick links I can poke around at (that are up and running) that I
can use for attempting a traffic balancer from a Dachstein box? OR should I
move to another release?
I've got a couple WWW servers I want to thr
I telecommute thru my FreeSwan VPN from Chicago to Detroit.
I set up a Win2k server here that runs WINs and replicates at something like
12am to me only (a Pull replication). I only need to do it once or 2x day.
I logon to my own network here and can use the shared folders in Detroit. I
can als
I was messing around with the multicron-p last night for auto re-starting a
downed VPN tunnel and was messing with the pingcheck myself.
Is there a published update to multicron-p anywhere? or is it more than
that to fix the pingcheck?
Thanks
Alec
-Original Message-
From: [EMAIL PRO
I don't quite understand it myself. I was downloading some MP3's and within
an hour of using it I find that I had people downloading those same MP3's
from me. I thought you needed to open ports and point the forwarding rules
to your desktop. So I am not sure how it was able to allow other users
ack that was it, I was loading the masq_ipsec module when I don't need it.
I am using IPSec as a gateway on the router, not a client.
Thanks
- Original Message -
From: Charles Steinkuehler <[EMAIL PROTECTED]>
To: Alec Miller <[EMAIL PROTECTED]>; <[EMAIL PROT
Anyone know how to get rid of this error in the logs? Running IPSec 1.91
from Charles site on Dachstien CD 1.02.
router kernel: ip_demasq_esp(): Inbound from 65.xx.xx.xx SPI EBC4FE83 has no
masq table entry
Thanks
___
Leaf-user mailing list
[EMAIL
what would cause this to show up in the logs? I just recently got IPSec
going yesterday and I see a lot of this. (but it appears everything is
working ok)
router kernel: ip_demasq_esp(): Inbound from xx.xx.xx.66 SPI 4DCCECFC has no
masq table entry.
the xx.xx.xx.66 IP is the remote GW I am conn
did you change the back up options to save to the Floppy?
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, January 10, 2002 4:49 PM
Subject: [Leaf-user] Saving IPSec Configuration on DCD...??
OK, I give up. What is the magic combination for gettin
How can you tell if Tinydns is running? Weblet shows it was loaded but the
running process list only shows dnscache.
I tried /etc/init.d/tinydns restart
and I get this back in response:
tinydns error: tinydns start arg
and Clues?
and when did Geocrawler become non-searchable? or did I miss
I've got the Dachstein RC5 up and running and I copied over the configs for
IPSec 1.5.
I just copied over all the previous configs from 1.5 and everything connects
(ipsec manual connection) without any errors that I can see, even poking
thru all the debug output shows everything as 'success'. I
sorry...
Ok...I've got a C-Strike server on the outside of my network, unmanaged by
anything. It is fowarding log files/info from port 27016 to a remote www
server on port 2002 inside the NAT'd DMZ.
- Original Message -
From: Charles Steinkuehler <[EMAIL PROTECTED]>
I've got Dachstein RC5 running and trying to put the final touches on it.
I've got a Counter-Strike server spitting into to another server inmy DMZ.
I've tried to open this port to allow the info to pass thru into the DMZ but
for some reason I just can't figure this one out.
I've tried opening
.
I think wasting the 50 cents a CD would have been better than using a CD-RW
to start with.
I do have to say that after almost a year trying to get the Java BW meter
running on LRP and now seeing it in Webletthis Rocks!
- Original Message -
From: Charles Steinkuehler <[EMAIL PROTECT
I have had no luck with the Nortel Access Client working thru the Eiger
images. I just had to convince my firewall expert to make an IPSec
connection to the actual LRP box from the corporate firewall, but it helps
if you work in the IT dept.
I do have a friend that got his Nortel Access Client w
anks
- Original Message -
From: Charles Steinkuehler <[EMAIL PROTECTED]>
To: Alec Miller <[EMAIL PROTECTED]>; LEAF
<[EMAIL PROTECTED]>
Sent: Tuesday, November 13, 2001 4:17 PM
Subject: Re: [Leaf-user] Dachstein-CD RC4: loading modules
> anyone else got any more hi
nt
- Original Message -
From: James Duberg <[EMAIL PROTECTED]>
To: Alec Miller <[EMAIL PROTECTED]>; LEAF
<[EMAIL PROTECTED]>
Sent: Tuesday, November 13, 2001 5:00 PM
Subject: Re: [Leaf-user] Dachstein-CD RC4: loading modules
You put the pci-scan module before the NIC modules,
anyone else got any more hints they can give?
I put the pci-scan driver in but it still won't load any network card
modules. But it sure seems to load everything else off the CD OK.
thanks
Alec
- Original Message -
From: Alec Miller <[EMAIL PROTECTED]>
To: LEAF <[E
I think I missed something in the module loading process. I get everything
loading in the boot process and its missing loading the modules for the
network cards. I am sure its in the module file in \etc but I don't know if
I am doing this correctly.
I am booting from the floppy to load the CD.
there are several flavors of VNC.
even "spyware" VNC.
http://www.tridiavnc.com/news/time_response.html
I don't remember exactly what they did with this version, but I think it has
better compression than the AT&T version.
http://www.tridiavnc.com/
- Original Message -
From: Hilton Tra
Someone sent me this link in the midst of the recent Nimda attacks.
I don't have the tools to make this into an LRP package, but I think this
could be a neat addon.
(If it doesn't already exist for LRP)
Alec
=
http://www.incidents.org/LaB
You also need to open some other ports to get HL Server to work.
try opening TCP ports 6003 and 7001. But I don't remember if these are for
the clients or the Server.
- Original Message -
From: Mark W. Windish <[EMAIL PROTECTED]>
To: Scott C. Best <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTEC
FYI --
Remember that the HL engine will only use Public IP addresses in order to be
seen in a Game browser.
(GameSpy, or the HL server browser)
You can still launch the server but you will have to post the External IP
somewhere (webpage,e-mail) that will forward the packets to the internal IP
Same thing.
Dell Optiplex P133 with a large heatsink..In my naturally cooled 60
degree (F) basement.
the only thing left cooling it is the Power supply fan.
- Original Message -
From: Peter Nosko <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, July 09, 200
I use the linksys 4 port version. I had to return the 1st one since the
'hot keys' wouldn't respond. The second one works great using the Belkin
cable kits. I got everything from http://www.cdw.com . They priced out
the Belkin cables over the phone to $8 for each PC, which doesn't match
th
32 matches
Mail list logo
