oglegroups.com
Subject: RE: New Members and Moderation
<zzz!--[if gte="" mso="" 9]="">
<zzz![endif]--><zzz!--[if gte="" mso="" 9]="">
<zzz![endif]-->
I really like this idea, here in Australia where
Of Harvey Matyas
Sent: Monday, 6 June 2016 6:16 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New Members and Moderation
I have not used the method described on the link below but plan to in the near
future. I need to buy the supper glue and accelerant.
It is not double sided
I have not used the method described on the link below but plan to in the
near future. I need to buy the supper glue and accelerant.
It is not double sided tape but hopefully a better method.
Harvey
https://www.youtube.com/watch?v=3uTsQ3dYRrk
On Sat, Jun 4, 2016 at 3:30 PM, Phil Burns
Message -
From: "Phil Burns" <fillbu...@gmail.com>
To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com>
Cc: Legacy-Ornamental-Mills@googlegroups.com
Sent: Saturday, June 4, 2016 4:30:11 PM
Subject: Re: New Members and Moderation
I just
I just got a manual Legacy 1000xl mill and just started using it, my first
project being a flag display box. I am learning by my mistakes. My
question is what is a good source for the double sided tape used to hold
the project in place while milling it? Does it have to be the foam kind? I
Sent: *Saturday, April 23, 2016 9:58:27 AM
*Subject: *New Members and Moderation
Hello fellow Legacy mill owners. My name is Jason Dowdy in Oklahoma
City.nI recently acquired a 1000EX model and I'm very excited to get
started using it. Any helpful tips, owners manuals, or other resources
would be gre
; <jmdo...@gmail.com>
To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com>
Sent: Saturday, April 23, 2016 9:58:27 AM
Subject: New Members and Moderation
Hello fellow Legacy mill owners. My name is Jason Dowdy in Oklahoma City.nI
recently acquired a 1000EX
Hello fellow Legacy mill owners. My name is Jason Dowdy in Oklahoma City.nI
recently acquired a 1000EX model and I'm very excited to get started using it.
Any helpful tips, owners manuals, or other resources would be greatly
appreciated. Thanks
--
You received this message because you are
ning...@gmail.com>
To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com>
Cc: Legacy-Ornamental-Mills@googlegroups.com
Sent: Monday, March 21, 2016 9:58:24 AM
Subject: Re: New Members and Moderation
On Saturday, March 31, 2012 at 8:07:09 PM UT
On Saturday, March 31, 2012 at 8:07:09 PM UTC-4, Tim wrote:
>
> Hello New Members,
>
> This is a reminder that until you post a message, your messages must be
> approved by either an owner or moderators of this group to be
> posted. Google sends an automated message to the people that
>
On Saturday, March 31, 2012 at 7:07:09 PM UTC-5, Tim wrote:
>
> Hello New Members,
>
> This is a reminder that until you post a message, your messages must be
> approved by either an owner or moderators of this group to be
> posted. Google sends an automated message to the people that
>
Thanks
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Okla Mike
(Liltwisted)
Sent: Thursday, 31 December 2015 10:41 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New Members and Moderation
Those are about
Hi Rocky & Everyone
Appreciate a little levity once in a while and in that direction a question
for Rocky. Can you imagine the variable pitch spiral possibilities by using
a trained snake on a dowel for the template? Great mousers
too.
Best to all for the New Year Tom Dotta
ntal-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] *On Behalf Of *MWF
*Sent:* Thursday, 31 December 2015 9:10 AM
*To:* legacy-ornamental-mills@googlegroups.com
*Subject:* Re: New Members and Moderation
Made for & usable by Shaquille O'Neil perhaps? Not for the "averag
c: Legacy-Ornamental-Mills@googlegroups.com
Subject: Re: New Members and Moderation
Aussiman, the baseball bats are six inches at largest diameter to smallest taper at 2 1/2 inches 6 feet long. I think I have a picture somewhere hold it up I will try and find it once I fly home.On Saturday, March 31
] On Behalf Of Rocky92585
Sent: Wednesday, 30 December 2015 3:36 PM
To: Legacy Ornamental Mills
Cc: Legacy-Ornamental-Mills@googlegroups.com
Subject: Re: New Members and Moderation
I attached a couple of pictures of the finished Baseball bats mounted in a
powder coated steel cross mount. I
Aussiman, the baseball bats are six inches at largest diameter to smallest
taper at 2 1/2 inches 6 feet long. I think I have a picture somewhere hold
it up I will try and find it once I fly home.
On Saturday, March 31, 2012 at 5:07:09 PM UTC-7, Tim wrote:
>
> Hello New Members,
>
> This is
Hello, I am a newbie here and love my mill, hoping to gain knowledge and
share with all. I just made some( 2-6') bats for a memorial dedication at
a Navy ballpark at San Clemente Island and it worked perfectly. Just
learning on the mill now and looking to really do some amazing stuff to the
: Rocky92585 <stevewebbe...@gmail.com>
Sent: Dec 29, 2015 10:23 AM
To: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com>
Cc: Legacy-Ornamental-Mills@googlegroups.com
Subject: Re: New Members and Moderation
Hello, I am a newbie here and love my mill, hoping to gain knowled
Hello Rocky92585!
I'm Ernesto, just a spert for now, I also am curious about your bats and the
whole process. Welcome to the group.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving
-
From: "Ernesto Olguin" <nesto...@gmail.com>
To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com>
Sent: Sunday, December 6, 2015 12:53:06 AM
Subject: Re: New Members and Moderation
Curtis
Thanks for the info. I was hoping that I wouldn't be forc
done THAT COUNTS. ;-)
Have a great day.
C.A.G.
- Original Message -
From: "Ernesto Olguin" <nesto...@gmail.com>
To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com>
Sent: Sunday, December 6, 2015 12:53:06 AM
Subject: Re: New Members and
Curtis
Thanks for the info. I was hoping that I wouldn't be forced to send my bits out
to be re-sharpened regularly. The similarity with hand tool upkeep is
refreshing. I was feeling very out of water because I don't really use power
tool for woodworking. Besides the occasional band saw...
: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Sunday, 6 December 2015 1:08 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New Members and Moderation
Hello Everyone.
Magnate router bits are about half
d new tips are cheaper than a whole new bit.
Bill
*From:*legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] *On Behalf Of
*CURTIS GEORGE
*Sent:* Sunday, 6 December 2015 1:08 PM
*To:* legacy-ornamental-mills@googlegroups.com
*Subject:* Re: New Members and Moderat
nal Message-
> >From: Ernesto Olguin
> >Sent: Dec 4, 2015 12:12 PM
> >To: Legacy Ornamental Mills
> >Subject: Re: New Members and Moderation
> >
> >Thanks for the welcome Mac & CAG. Today I finished mounting the router and
> >turned my first cylindr
g to think about.
c.a.g.
- Original Message -
From: "Roger H Phebey" <rhp...@gmail.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Saturday, December 5, 2015 12:51:06 PM
Subject: Re: New Members and Moderation
Hi Tim
My understanding has always been that Magna
Hey Curt, the 800 is not that limited. It's a 900 minus a reverse gear and 4
gears.
-Tim
- Original Message -
From: CURTIS GEORGE
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, December 03, 2015 6:52 AM
Subject: Re: New Members and Moderation
Hello
Thanks for the welcome Mac & CAG. Today I finished mounting the router and
turned my first cylindrical piece. Also did some simple shape routing, to get a
feel for the set up. I look forward to implementing some of your great mods.
Expecially the dust management mods.
Our shop is loaded with
.
- Original Message -
From: "Tim Krause" <artmarb...@comcast.net>
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, December 4, 2015 8:15:30 AM
Subject: Re: New Members and Moderation
Hey Curt, the 800 is not that limited. It's a 900 minus a reverse gear and 4
-ornamental-mills@googlegroups.com
Sent: Friday, December 04, 2015 10:37 AM
Subject: Re: New Members and Moderation
Ernesto,
IMHO you can't go wrong with Whiteside bits. They don't make too many that
are useful on the LOM - but if they have one that will achieve your result, I'd
get it. The one
015 12:12 PM>To: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com>>Subject: Re: New Members and Moderation>>Thanks for the welcome Mac & CAG. Today I finished mounting the router and turned my first cylindrical piece. Also did some simple shape routing, to
om>
Sent: Thursday, December 3, 2015 12:51:40 AM
Subject: New Members and Moderation
Hello group
I am Ernesto. I am a woodworker in Tucson, AZ. I just started working with
another craftsman, helping him start a furniture line. He just got a used
Legacy 800EX Ornamental Mill. We are co
Hello group
I am Ernesto. I am a woodworker in Tucson, AZ. I just started working with
another craftsman, helping him start a furniture line. He just got a used
Legacy 800EX Ornamental Mill. We are complete novices and just finished setting
it up and cleaning it. I am extremely excited for all
(or as others call him "NY Joe").Again, welcome - we all look forward to seeing some of your "projects".Mac -Original Message->From: Ernesto Olguin <nesto...@gmail.com>>Sent: Dec 3, 2015 12:51 AM>To: Legacy Ornamental Mills <legacy-ornamental-mills@goog
, June 18, 2015 8:28:30 PM
Subject: Re: New Members and Moderation
Hello I just bought a 900 mill and looking for information on its use.called
legacy looking for mounting hubs mine has none. ordered the starter set of bits
from magna hope to make shavings soon
On Saturday, March 31, 2012 at 8:07
Hello I just bought a 900 mill and looking for information on
its use.called legacy looking for mounting hubs mine has none. ordered the
starter set of bits from magna hope to make shavings soon
On Saturday, March 31, 2012 at 8:07:09 PM UTC-4, Tim wrote:
Hello New Members,
This is a
What items do you want to sell? I have a 900 I would like to motorize. Please
let me know. Thanks
--
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
not know before.) ;-p
Have a great night.
C.A.G.
- Original Message -
From: CURTIS GEORGE curtgeo...@wowway.com
To: legacy-ornamental-mills@googlegroups.com
Sent: Wednesday, March 25, 2015 7:56:50 PM
Subject: Re: New Members and Moderation
Hello and Welcome
The motor mounting
Hello my name is Alexander. I live in Ukraine (Odessa). Buyer Workshop NEW
Evolution. I think this is the right choice of instrument.
--
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving
-ornamental-mills@googlegroups.com
Sent: Wednesday, October 22, 2014 7:47:39 AM
Subject: New Members and Moderation
Hello my name is Alexander. I live in Ukraine (Odessa). Buyer Workshop NEW
Evolution. I think this is the right choice of instrument.
--
You received this message because you
is the saying
Bill
-Original Message-
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of ?
Sent: Wednesday, 22 October 2014 10:48 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: New Members and Moderation
Try to email direct to legacy-ornamental-mills@googlegroups.com
otherwise you will have to wait till the moderator gives you the green light
Mike
OK
On 10/3/2014 8:37 PM, sucric via Legacy Ornamental Mills wrote:
Hi,
I'm a new member to the group.
My first question is how do I post messages?
: sucric via Legacy Ornamental Mills
To: legacy-ornamental-mills@googlegroups.com
Cc: Legacy-Ornamental-Mills@googlegroups.com
Sent: Friday, October 03, 2014 6:37 PM
Subject: Re: New Members and Moderation
Hi,
I'm a new member to the group.
My first question is how do I post messages
I am wondering if this site is still active. I have a Legacy mill 1200XL
and all the goodies they had for it at the time I bought it.
I've been working wood for almost three decades, starting out when we
bought a nearly 200 year old house. My first workshop was a tiny room of
only 80
Good morning Don.
My garage has not had a car in it for something like 20 yrs now.
I to share your problems of little space to work in, There are plenty of way to
get the most out of what you have.
I have a friend that put his Legacy onto a cable and A hoist system, When not
in use he lifted
Thanks, Curtis, for your response.
My mill, over eight feet long counting the drive motor at the end is to big
and heavy to lift or even move much. I do have it on casters and can move
it if necessary, but rarely do. I just place it as far over toward the side
wall as I can when not running it.
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause
Sent: Monday, January 27, 2014 8:16 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New Members and Moderation
My cycle-start used to be driving to the shop, cracking a Porter and figuring
out what I was going
: Legacy-Ornamental-Mills@googlegroups.com
Subject: Re: New Members and Moderation
Hopefully this works. The first pic below is a fossilsed ammonite inlayed in a
maple burl this was then inlayed into the buckle. The buckle was shaped on the
rotary table and so was the pocket for the maple inlay
-Ornamental-Mills@googlegroups.com
Sent: Thursday, January 30, 2014 9:13 AM
Subject: Re: New Members and Moderation
Hopefully this works. The first pic below is a fossilsed ammonite inlayed
in a maple burl this was then inlayed into the buckle. The buckle was shaped on
the rotary table
Beautiful work
On Thursday, January 30, 2014, Calypso john.bo...@jdsu.com wrote:
Hopefully this works. The first pic below is a fossilsed ammonite
inlayed in a maple burl this was then inlayed into the buckle. The buckle
was shaped on the rotary table and so was the pocket for the maple
To VA Oak,
I am located in Avon Indiana just west of Indianapolis.
To Bill,
Hi bill Glad to see another Revo owner. I will attempt to post a couple of
pictures of the belt buckles tomorrow.
--
You received this message because you are subscribed to the Google Groups
Legacy
@googlegroups.com
Subject: Re: New Members and Moderation
To VA Oak,
I am located in Avon Indiana just west of Indianapolis.
To Bill,
Hi bill Glad to see another Revo owner. I will attempt to post a couple of
pictures of the belt buckles tomorrow.
--
You received this message because
like to see my Evolution in person as well.
- Original Message -
*From:* curt george curtgeo...@wowway.com
*To:* legacy-ornamental-mills@googlegroups.com
*Sent:* Monday, January 27, 2014 4:57 PM
*Subject:* Re: New Members and Moderation
Bill did you try the You-tube site.
http
to make
up for cutter wear or machine changes?
-Tim
PS, I sure would like to see my Evolution in person as well.
- Original Message -
From: curt george
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday, January 27, 2014 4:57 PM
Subject: Re: New Members
-ornamental-mills@googlegroups.com
Subject: Re: New Members and Moderation
I get your point. Are they on the Legacy YouTube channel or have they stopped
feeding that?
-Tim
- Original Message -
From: Bill Bulkeley mailto:bulke...@mmnet.com.au
To: legacy-ornamental-mills
I missed that one interesting
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of curt george
Sent: Tuesday, 28 January 2014 12:08 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New Members and Moderation
OK
-ornamental-mills@googlegroups.com
Subject: Re: New Members and Moderation
Bill did you try the You-tube site.
http://www.youtube.com/user/legacywoodworking/videos?sort=dd
http://www.youtube.com/user/legacywoodworking/videos?sort=ddview=0shelf_id=1
view=0shelf_id=1
As a side note, the EVO video
OUS asset! We appreciate what you have done so far - and continue to look forward to maintaining our special relationship for years to come.Mac-Original Message-
From: curt george <curtgeo...@wowway.com>
Sent: Jan 24, 2014 7:30 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New Membe
J J J
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of
mwfos...@earthlink.net
Sent: Monday, 27 January 2014 9:44 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New Members and Moderation
Earth
to
see
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of curt george
Sent: Saturday, 25 January 2014 11:30 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New Members and Moderation
Hello and Welcome
Greetings fellow saw dust makers,
This is just a short introduction to get things started. I have owned a
Revo for a few years. What a great little machine! I typically make smaller
items like belt buckles, E-cigs, pens and the like but have made some
columns with it too using a
Thanx everyone for the info. Never dawned on me to ask if they had one
ready to sell (so this forum is already very helpful) so I guess I need to
speak with Cindy again and ask that question. There was no indication in
prior calls that it wasn't shipping and she told me that it was 4 weeks to
Hi Tim,
I'm Dan and have lived in Alaska for the past 30 years. Have been active in
the woodworking craft business for the past 10 years (mostly bowls) and am
retiring in the next couple of months so will have time to expand my
horizons. Really wanted to jump right into the CNC
...@yahoo.com
Sent: Thursday, 29 August 2013 6:23 AM
To: legacy-ornamental-mills@googlegroups.com
Cc: Legacy-Ornamental-Mills@googlegroups.com
Subject: Re: New Members and Moderation
Hi Tim,
I'm Dan and have lived in Alaska for the past 30 years. Have been active in
the woodworking craft business
, August 28, 2013 11:05 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: New Members and Moderation
Welcome to the group I have not actually heard of any one getting a Evolution
as yet . i know one of the members is suppose to be getting one and he has not
heard a thing for months. so
On Saturday, March 31, 2012 8:07:09 PM UTC-4, Tim wrote:
Hello New Members,
This is a reminder that until you post a message, your messages must be
approved by either an owner or moderators of this group to be
posted. Google sends an automated message to the people that
are
Sliverfoot. ask away. When I started out Tim was a great help to me. Many others here bent over backwards to assist me. I also have a 900 and havedonesome pretty interesting things in the name of experimantation. in woodworking terms that means I made some really expensive firewoodone great
Hi Tim
This winter I purchased a used 900 and can't wait to get going on it. The
trouble is I have to admit to being a little intimidated by it. Guess I
just need to jump in, take notes, and get my feet wet. Hopefully you guys
can help me through the learning curve.
Sliverfoot
On Saturday,
to the group
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of sliverfoot
Sent: Friday, 1 March 2013 5:17 AM
To: legacy-ornamental-mills@googlegroups.com
Cc: Legacy-Ornamental-Mills@googlegroups.com
Subject: Re: New Members and Moderation
may have
in your wood shop ?. ;-)
Have a great day.
C.A.G.
- Original Message -
From: Servant
To: legacy-ornamental-mills@googlegroups.com
Cc: Legacy-Ornamental-Mills@googlegroups.com
Sent: Sunday, November 11, 2012 8:38 PM
Subject: Re: New Members and Moderation
Hello Tim
Hello Tim, it is an honor to become a member of this group. I look forward
to enjoying many articles and comments on this site.
Yours,
Servant
On Saturday, March 31, 2012 8:07:09 PM UTC-4, Tim wrote:
Hello New Members,
This is a reminder that until you post a message, your messages
Welcome to the group.
-Tim
- Original Message -
From: Servant
To: legacy-ornamental-mills@googlegroups.com
Cc: Legacy-Ornamental-Mills@googlegroups.com
Sent: Sunday, November 11, 2012 5:38 PM
Subject: Re: New Members and Moderation
Hello Tim, it is an honor
Welcome Servant
Bill
- Original Message -
From: Servant
To: legacy-ornamental-mills@googlegroups.com
Cc: Legacy-Ornamental-Mills@googlegroups.com
Sent: Monday, November 12, 2012 12:38 PM
Subject: Re: New Members and Moderation
Hello Tim, it is an honor to become
I am a new member as of May 22, 2012. A replay to Bill that wants a 5'
section of 1x8tpi, I got mine at FashenAll (sp). Cost about $50.00 in
stock. Also can anybody tell me why
Legacy does not support there not so old machine (1000EX) I though it was
the law you had to support for seven
.) and will be asking.
Let us know how things turn out.
talk to you latter.
C.A.G.
- Original Message -
From: gregle...@netzero.net
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, April 26, 2012 11:45 PM
Subject: Re: New Members and Moderation
Hi guys,
C.A.G. just described my
the rails.) and will be
asking.
Let us know how things turn out.
talk to you latter.
C.A.G.
- Original Message -
From: gregle...@netzero.net
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, April 26, 2012 11:45 PM
Subject: Re: New Members and Moderation
Hi Greg,Ok, don't keep us in suspense - Why did it almost take a sledgehammer to make the carriage move? Let me guess - the channels in the 80/20 were packed with wood chips and sawdust. The only other possibility that comes to mind would be that the outer rails got "out of parallel".Any info your
a great day.
C.A.G.
- Original Message -
From: mwfos...@earthlink.net
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, April 26, 2012 12:28 PM
Subject: Re: New Members and Moderation
Hi Greg,
Ok, don't keep us in suspense - Why did it almost take a sledgehammer
Krause artmarb...@comcast.net
To: legacy-ornamental-mills@googlegroups.com
Sent: Tuesday, April 24, 2012 9:53 PM
Subject: Re: New Members and Moderation
You have to really thank Begat for posting the machines for sale. I've
really appreciated his effort that he has put into the group.
Out
Hi Tim and group,
I have been reading the group posts almost daily but I have not posted
on here much. I really appreciate the group members sharing their
talents and ideas. I recently got my 900 back in service. It was
unusable because it almost took a sledge hammer to get the carriage to
we have is really thin!
-Tim
- Original Message -
From: Greg gregle...@netzero.net
To: Legacy Ornamental Mills legacy-ornamental-mills@googlegroups.com
Sent: Tuesday, April 24, 2012 6:25 PM
Subject: Re: New Members and Moderation
Hi Tim and group,
I have been reading the group
@googlegroups.com
Sent: Thursday, April 12, 2012 3:20 AM
Subject: Re: New Members and Moderation
Hi Tim,
I am a new member. I have been reading along for a little bit. I have
owned a 900 for a few years and am going in on a CNC from Legacy. I
was wondering about posting some items for sale here
: Jared Kajka
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, April 12, 2012 11:39 PM
Subject: Re: New Members and Moderation
HI,
I have not posted the 900 yet. What are the rails and screw worth to you?
The Machine is like new. I bought it and hardly used it.
Thanks
PM
Subject: Re: New Members and Moderation
$100 a rail is about the most i can afford and $50 for the screw
all the saddle, head and tailstock, gears,legs, parts etc
hopfully there is others out there that will buy all this too
some one out there might come in with me
Hi Tim,
I am a new member. I have been reading along for a little bit. I have
owned a 900 for a few years and am going in on a CNC from Legacy. I
was wondering about posting some items for sale here. Is it ok or is
there a better way to go about it?
Thanks
Jared
On Mar 31, 8:07 pm, Tim Krause
on the list that are just being shy and just need an
opportunity to share.
-Tim
- Original Message -
From: DC Jared jkajk...@gmail.com
To: Legacy Ornamental Mills legacy-ornamental-mills@googlegroups.com
Sent: Wednesday, April 11, 2012 10:20 AM
Subject: Re: New Members and Moderation
Hi Tim
legacy-ornamental-mills@googlegroups.com
Sent: Thursday, April 12, 2012 3:20 AM
Subject: Re: New Members and Moderation
Hi Tim,
I am a new member. I have been reading along for a little bit. I have
owned a 900 for a few years and am going in on a CNC from Legacy. I
was wondering about posting some
Hello New Members,
This is a reminder that until you post a message, your messages must be
approved by either an owner or moderators of this group to be posted. Google
sends an automated message to the people that are responsible for approving
messages, but please be aware it can be a very
101 - 189 of 189 matches
Mail list logo